| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Easy Appointments WordPress plugin before 3.12.28 does not verify that the appointment targeted by its customer-data update action belongs to the current user; the action only checks a shared nonce that any authenticated user can obtain from their own appointment's edit form. A subscriber-level user with an appointment of their own can therefore reuse that nonce to overwrite the customer metadata (email, name, phone, description) of another user's appointment. Because the Easy Appointments WordPress plugin before 3.12.28 then treats that metadata as the appointment's contact data, a subsequent administrator status change with customer notifications enabled delivers the victim's appointment notification to the attacker-controlled email address. |
| The Easy Appointments WordPress plugin through 4.0 does not perform capability checks in several of its appointment-management actions, relying only on a nonce that any authenticated user can obtain, allowing users with contributor-level access to read all customers' appointment details and to create, modify, and delete bookings. |
| The Easy Appointments WordPress plugin before 3.12.28 does not perform a per-request capability or nonce check on one of its customer-listing handlers, allowing authenticated users with contributor-level access to read every stored customer's personal information. |
| The PayU CommercePro Plugin WordPress plugin before 3.9.0 does not verify the payment-gateway signature before applying order modifications, allowing unauthenticated attackers to tamper with the totals, shipping and metadata of arbitrary WooCommerce orders. |
| The Easy Appointments WordPress plugin before 3.12.28 does not verify ownership or capability when returning stored customer details, allowing users with subscriber-level access to read any customer's personal information by iterating an identifier. |
| The wp-media-folder-addon WordPress plugin before 4.1.7 does not validate a user-supplied parameter before using it in a file read operation in two AJAX actions available to unauthenticated users, leading to Arbitrary File Disclosure and Server-Side Request Forgery on sites where a cloud storage connection has been configured. This is an incomplete fix of CVE-2026-9690, whose patch hardened only one of the affected cloud-storage handlers and left the others unpatched. |
| The Easy Appointments WordPress plugin before 3.12.28 does not perform any capability or nonce check in one of its connection-deletion actions, allowing users with contributor-level access to delete the booking configuration and disable the booking system. |
| LightRAG provides simple and fast retrieval-augmented generation. Through version 1.5.4, the LightRAG API server binds to all network interfaces with authentication disabled by default, allowing an unauthenticated network attacker to read indexed document content, upload or delete documents, modify the knowledge graph, cancel pipelines, clear caches, and consume LLM resources. This issue is mitigated in version 1.5.5rc1. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.15.0, a crafted PDF can cause large memory consumption when pypdf/_cmap.py function parse_bfrange parses unusually large source-code or destination-string tokens in a font /ToUnicode CMap during text extraction. This issue is fixed in 6.15.0. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: validate PMSR FTM preamble range
PMSR FTM request parsing accepts preamble values outside the
enumerated nl80211 preamble range.
Reject out-of-range values before using them in the parser capability
bit test using the policy.
[drop unnecessary check] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/vf: Fix VF CCS attach/detach race with in-flight BO moves
xe_bo_move() attaches VF CCS read/write batch buffers (BBs) to a BO
after it transitions NULL/SYSTEM -> TT, and detaches them after it
transitions TT -> SYSTEM. Both operations were done synchronously on
the CPU immediately after building the move's copy/clear fence,
without waiting for that fence to signal. This creates two races with
VF migration:
- Attach happens too late relative to the copy job it is meant to
protect. If the copy job is submitted before the CCS BBs are
attached, a VF migration event that pauses execution mid-copy can
observe partially copied CCS metadata without the attach state
needed to correctly save/restore it.
- Detach happens too early relative to the copy job that moves data
out of TT. The CCS BBs are torn down right after the copy fence is
obtained, while the actual blit may still be in flight. A VF
migration event that pauses execution mid-copy can then race the
save/restore path against the still-running blit, and the CCS BBs
it would need to make sense of the paused state have already been
removed.
Fix both races:
- Move the attach call to before the copy/clear job is submitted, so
the CCS BBs are already registered by the time the copy runs. On
attach failure, unwind and bail out of the move. xe_migrate_ccs_rw_copy()
now takes the destination resource explicitly, since bo->ttm.resource
is not updated to the new resource until after the move commits.
- Detach only after explicitly waiting for the copy fence to signal,
instead of tearing down the CCS BBs immediately after obtaining it.
While here, also fix xe_sriov_vf_ccs_attach_bo() to properly unwind and
propagate errors: the per-context loop previously never broke out on
error, silently discarding earlier failures. Unwind by clearing each
attached context directly via xe_migrate_ccs_rw_copy_clear() instead of
reusing xe_sriov_vf_ccs_detach_bo(), which requires both contexts to be
attached before it will clean up either one.
(cherry picked from commit d45ad0aa7a1eb5d7288b5ed948b05695611dc39e) |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.15.0, a crafted PDF can cause long runtimes and large memory consumption when pypdf/_font.py function Font._collect_cid_character_widths expands unusually large CID font /W width ranges or excessive width entries during text extraction. This issue is fixed in 6.15.0. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: hif_usb: don't dereference hif_dev after re-arming firmware request
ath9k_hif_request_firmware() re-arms an asynchronous firmware load via
request_firmware_nowait(), passing hif_dev as the completion context, and
then still dereferences hif_dev:
dev_info(&hif_dev->udev->dev, "ath9k_htc: Firmware %s requested\n",
hif_dev->fw_name);
The re-armed callback ath9k_hif_usb_firmware_cb() runs on the "events"
workqueue and, when the firmware is missing, walks the retry chain into
ath9k_hif_usb_firmware_fail() -> complete_all(&hif_dev->fw_done). That
releases the wait_for_completion(&hif_dev->fw_done) in a concurrent
ath9k_hif_usb_disconnect(), which then kfree()s hif_dev. The trailing
dev_info() in the frame that re-armed the request can therefore read freed
memory (hif_dev->udev, the first field of struct hif_device_usb):
BUG: KASAN: slab-use-after-free in ath9k_hif_request_firmware
Read of size 8 ... by task kworker/...
ath9k_hif_request_firmware
ath9k_hif_usb_firmware_cb drivers/net/wireless/ath/ath9k/hif_usb.c:1247
request_firmware_work_func
Allocated by ...:
ath9k_hif_usb_probe drivers/net/wireless/ath/ath9k/hif_usb.c
Freed by ...:
ath9k_hif_usb_disconnect -> kfree drivers/net/wireless/ath/ath9k/hif_usb.c
The fw_done barrier only makes disconnect wait for the firmware chain to
*terminate*; it does not protect the outer ath9k_hif_request_firmware()
frame that re-armed the request and keeps touching hif_dev afterwards.
Drop the post-request dev_info(): it is the only use of hif_dev after the
async request is armed, and it is purely informational (the dev_err() on the
failure path runs only when request_firmware_nowait() did not arm a callback,
so hif_dev is still alive there).
This was first reported by syzbot as a single, non-reproduced crash that was
later auto-obsoleted, and was independently rediscovered by the reFuzz fuzzer,
which produced a C reproducer (USB-gadget connect/disconnect of an ath9k_htc
device whose firmware download fails). The vulnerable code is unchanged and
still present in v7.1-rc6, where the slab-use-after-free reproduces under KASAN
once the (sub-microsecond) race window is widened. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: airoha: Prevent division by zero when clock frequency is zero
clk_get_rate() can return 0 when the clock provider is not properly
configured or the clock is unmanaged. The driver uses wdt_freq as a
divisor directly in airoha_wdt_probe() to compute max_timeout and in
airoha_wdt_get_timeleft() to compute the remaining time, which results
in a division by zero.
Add a check for wdt_freq == 0 in probe and return -EINVAL with
dev_err_probe() to prevent the division by zero and provide a
diagnostic message. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath6kl: fix OOB read from firmware num_msg in TX complete handler
The firmware-controlled num_msg field (u8, 0-255) drives the loop in
ath6kl_wmi_tx_complete_event_rx() without validation against the buffer
length. This allows out-of-bounds reads of up to 1020 bytes past the
WMI event buffer when the firmware sends an inflated num_msg.
Add a check that the buffer is large enough to hold the fixed struct
and the num_msg variable-length entries. |
| Hono is a Web application framework that provides support for any JavaScript runtime. From 4.7.0 to 4.12.33, the Proxy Helper proxy() function in hono/proxy does not remove response headers named by the origin's Connection header. Per RFC 9110 Section 7.6.1, an intermediary must remove the header fields listed in a message's Connection header field before forwarding the message, in addition to the well known hop by hop headers, but the proxy() function only removed the well known hop by hop headers, including Connection itself, from origin responses. A client may therefore receive response headers that the origin intended only for its immediate peer, disclosing connection scoped or internal metadata contained in such headers, when an application proxies responses from an origin that declares additional, non standard headers as hop by hop via the Connection response header. This issue is fixed in version 4.12.34. |
| In the Linux kernel, the following vulnerability has been resolved:
nfp: Check resource mutex allocation
nfp_cpp_resource_find() allocates a CPP mutex handle for the matching
resource-table entry and then reports success. nfp_resource_try_acquire()
immediately passes that handle to nfp_cpp_mutex_trylock().
However, nfp_cpp_mutex_alloc() returns NULL on failure. If that happens
for a matching table entry, the resource lookup still returns success and
the following trylock dereferences a NULL mutex pointer while opening the
resource.
nfp_resource_acquire() already treats failure to allocate the table mutex
as -ENOMEM. Do the same for the resource mutex and fail the lookup before
publishing the rest of the resource handle.
This issue was found by a static analysis checker and confirmed by
manual source review. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: serialize udp bearer replicast list updates
tipc_udp_rcast_add() and cleanup_bearer() both update ub->rcast.list with
list_add_rcu() / list_del_rcu(), but nothing serializes them. The add runs
from the encap receive softirq (via tipc_udp_rcast_disc()) without
rtnl_lock(), so it can race the cleanup delete and corrupt the list:
list_del corruption. prev->next should be ffff8880298d7ab8,
but was ffff88802449ad38. (prev=ffff888027e3ec98)
kernel BUG at lib/list_debug.c:62!
RIP: __list_del_entry_valid_or_report+0x17a/0x200
Workqueue: events cleanup_bearer
Call Trace:
cleanup_bearer (net/tipc/udp_media.c:811)
process_one_work (kernel/workqueue.c:3302)
worker_thread (kernel/workqueue.c:3466)
The bearer can be enabled from an unprivileged user namespace, as the
TIPCv2 generic-netlink ops carry no GENL_ADMIN_PERM.
Add a spinlock to struct udp_bearer and take it around the list_add_rcu()
in tipc_udp_rcast_add() and the list_del_rcu() loop in cleanup_bearer() so
the two writers can no longer corrupt the list.
Reject a duplicate peer under the same lock before allocating, and remove
tipc_udp_is_known_peer(). The old lockless pre-check in
tipc_udp_rcast_disc() was racy: two softirqs discovering the same peer
could both find it absent and add it twice.
cleanup_bearer() runs from a workqueue after tipc_udp_disable() clears the
bearer's up bit, so an encap softirq can still reach tipc_udp_rcast_add()
and add a peer after cleanup_bearer() has already emptied the list, leaking
that entry when the bearer is freed. Mark the bearer disabled under
rcast_lock once the list is emptied and refuse further additions. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix u16 MTU truncation in media and bearer MTU validation
Both TIPC_NL_MEDIA_SET and TIPC_NL_BEARER_SET accept user-supplied
MTU values but only enforce a minimum bound, not a maximum. When a user
sets the MTU to a value exceeding U16_MAX (65535), it passes validation
but is silently truncated when assigned to u16 fields l->mtu and
l->advertised_mtu in tipc_link_create(). Values like 65536 (0x10000)
truncate to 0, causing a division by zero in tipc_link_set_queue_limits()
which computes TIPC_MAX_PUBL / (l->mtu / ITEM_SIZE). Other overflowing
values (e.g. 65537-131071) produce small incorrect MTU values, resulting
in link malfunction behaviors.
Crash stack (triggered as unprivileged user via user namespace):
tipc_link_set_queue_limits net/tipc/link.c:2531
tipc_link_create net/tipc/link.c:520
tipc_node_check_dest net/tipc/node.c:1279
tipc_disc_rcv net/tipc/discover.c:252
tipc_rcv net/tipc/node.c:2129
tipc_udp_recv net/tipc/udp_media.c:392
Two independent paths lack the upper bound check:
1. tipc_udp_mtu_bad() -- called from __tipc_nl_media_set() (MEDIA_SET)
2. inline check in __tipc_nl_bearer_set() at bearer.c:1160 (BEARER_SET)
Fix both by rejecting MTU values above U16_MAX. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Count paired job fence as dependency in prepare_job()
The DRM scheduler's prepare_job() callback counts the remaining
non-signaled native dependencies for a job, preventing job submission
until those (plus job data and fence update) can fit in the job queue's
CCCB.
This means checking which dependencies can be waited upon in the
firmware, i.e. whether they are backed by a UFO object, i.e. whether
their drm_sched_fence::parent has been assigned to a
pvr_queue_fence::base fence. That happens when the job owning the fence
is submitted to the firmware.
Paired geometry and fragment jobs are submitted at the same time, which
means the dependency between them can't be checked this way before
submission.
Update job_count_remaining_native_deps() to take into account the
dependency between paired jobs.
This fixes cases where prepare_job() underestimated the space left in
an almost full fragment CCCB, wrongly unblocking run_job(), which then
returned early without writing the full sequence of commands to the
CCCB.
The above lead to kernel warnings such as the following and potentially
job timeouts (depending on waiters on the missing commands):
[ 375.702979] WARNING: drivers/gpu/drm/imagination/pvr_cccb.c:178 at pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr], CPU#1: kworker/u16:3/47
[ 375.703160] Modules linked in:
[ 375.703571] CPU: 1 UID: 0 PID: 47 Comm: kworker/u16:3 Tainted: G W 7.0.0-rc2-g817eb6b11ad5 #40 PREEMPT
[ 375.703613] Tainted: [W]=WARN
[ 375.703627] Hardware name: Texas Instruments AM625 SK (DT)
[ 375.703645] Workqueue: powervr-sched drm_sched_run_job_work [gpu_sched]
[ 375.703741] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 375.703764] pc : pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr]
[ 375.703847] lr : pvr_queue_submit_job_to_cccb+0x578/0xa70 [powervr]
[ 375.703921] sp : ffff800084a97650
[ 375.703934] x29: ffff800084a97740 x28: 0000000000000958 x27: ffff80008565d000
[ 375.703979] x26: 0000000000000030 x25: ffff800084a97680 x24: 0000000000001000
[ 375.704017] x23: ffff800084a97820 x22: 1ffff00010952ecc x21: 0000000000000008
[ 375.704056] x20: 00000000000006a8 x19: ffff00002ff7da88 x18: 0000000000000000
[ 375.704093] x17: 0000000020020000 x16: 0000000000020000 x15: 0000000000000000
[ 375.704132] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
[ 375.704168] x11: 000000000000f2f2 x10: 00000000f3000000 x9 : 00000000f3f3f3f3
[ 375.704206] x8 : 00000000f2f2f200 x7 : ffff700010952ecc x6 : 0000000000000008
[ 375.704243] x5 : 0000000000000000 x4 : 1ffff00010acba00 x3 : 0000000000000000
[ 375.704279] x2 : 0000000000000007 x1 : 0000000000000fff x0 : 000000000000002f
[ 375.704317] Call trace:
[ 375.704331] pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr] (P)
[ 375.704411] pvr_queue_submit_job_to_cccb+0x578/0xa70 [powervr]
[ 375.704487] pvr_queue_run_job+0x3a4/0x990 [powervr]
[ 375.704562] drm_sched_run_job_work+0x580/0xd48 [gpu_sched]
[ 375.704623] process_one_work+0x520/0x1288
[ 375.704658] worker_thread+0x3f0/0xb3c
[ 375.704680] kthread+0x334/0x3d8
[ 375.704706] ret_from_fork+0x10/0x20
[ 375.704736] ---[ end trace 0000000000000000 ]--- |
