| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was detected in D-Link DI-8100 16.07.26A1. Affected by this issue is the function tggl_asp of the file /tggl.asp of the component HTTP Request Handler. Performing a manipulation of the argument Name results in buffer overflow. The attack can be initiated remotely. The exploit is now public and may be used. |
| A flaw has been found in D-Link DI-8100 16.07.26A1. This affects an unknown part of the file /url_member.asp of the component Web Management Interface. Executing a manipulation of the argument Name can lead to buffer overflow. The attack can be launched remotely. The exploit has been published and may be used. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Fix null pointer dereference issue
If SMU is disabled, during RAS initialization,
there will be null pointer dereference issue here. |
| In the Linux kernel, the following vulnerability has been resolved:
net: Drop the lock in skb_may_tx_timestamp()
skb_may_tx_timestamp() may acquire sock::sk_callback_lock. The lock must
not be taken in IRQ context, only softirq is okay. A few drivers receive
the timestamp via a dedicated interrupt and complete the TX timestamp
from that handler. This will lead to a deadlock if the lock is already
write-locked on the same CPU.
Taking the lock can be avoided. The socket (pointed by the skb) will
remain valid until the skb is released. The ->sk_socket and ->file
member will be set to NULL once the user closes the socket which may
happen before the timestamp arrives.
If we happen to observe the pointer while the socket is closing but
before the pointer is set to NULL then we may use it because both
pointer (and the file's cred member) are RCU freed.
Drop the lock. Use READ_ONCE() to obtain the individual pointer. Add a
matching WRITE_ONCE() where the pointer are cleared. |
| A vulnerability has been found in D-Link DI-8100 16.07.26A1. This vulnerability affects the function sprintf of the file /user_group.asp of the component CGI Handler. The manipulation leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. |
| Nginx UI is a web user interface for the Nginx web server. From version 2.0.0 to before version 2.3.8, an unauthenticated network attacker can claim the initial administrator account on a fresh nginx-ui instance during the first-run setup window. The public /api/install endpoint is reachable without authentication, and the request-encryption flow only protects payload confidentiality in transit; it does not authenticate who is allowed to perform installation. A remote attacker who reaches the service before the legitimate operator can set the admin email, username, and password, causing permanent initial-instance takeover. This issue has been patched in version 2.3.8. |
| Nginx UI is a web user interface for the Nginx web server. Prior to version 2.3.8, an authenticated user can call GET /api/settings and retrieve sensitive configuration values, including node.secret. The same node.secret is accepted by AuthRequired() through the X-Node-Secret header (or node_secret query parameter), causing the request to be treated as authenticated via the trusted-node path and associated with the init user. This issue has been patched in version 2.3.8. |
| Apache::Session::Generate::ModUniqueId versions from 1.54 through 1.94 for Perl session ids are insecure.
Apache::Session::Generate::ModUniqueId (added in version 1.54) uses the value of the UNIQUE_ID environment variable for the session id. The UNIQUE_ID variable is set by the Apache mod_unique_id plugin, which generates unique ids for the request. The id is based on the IPv4 address, the process id, the epoch time, a 16-bit counter and a thread index, with no obfuscation.
The server IP is often available to the public, and if not available, can be guessed from previous session ids being issued. The process ids may also be guessed from previous session ids. The timestamp is easily guessed (and leaked in the HTTP Date response header).
The purpose of mod_unique_id is to assign a unique id to requests so that events can be correlated in different logs. The id is not designed, nor is it suitable for security purposes. |
| Improper Verification of Cryptographic Signature vulnerability in liuyueyi quick-media (plugins/svg-plugin/batik-codec-fix/src/main/java/org/apache/batik/ext/awt/image/codec/util modules). This vulnerability is associated with program files SeekableOutputStream.Java.
This issue affects quick-media: before v1.0. |
| Improper Control of Generation of Code ('Code Injection') vulnerability in liuyueyi quick-media (plugins/svg-plugin/batik-codec-fix/src/main/java/org/apache/batik/ext/awt/image/codec/png modules). This vulnerability is associated with program files PNGImageEncoder.Java.
This issue affects quick-media: before v1.0. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.32, 2.17.4, and 2.18.1, the fix for GHSA-f3f2-mcxc-pwjx did not cover the Snowflake node or the legacy MySQL v1 node. Both nodes construct SQL queries by directly interpolating user-controlled table names, column names, and update keys into query strings without identifier escaping, enabling SQL injection against the connected database. This issue has been patched in versions 1.123.32, 2.17.4, and 2.18.1. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.32, 2.17.4, and 2.18.1, the MCP OAuth client registration endpoint accepted unauthenticated requests and stored client data without adequate resource controls. An unauthenticated remote attacker could exhaust server memory resources by sending large registration payloads, rendering the n8n instance unavailable. The MCP enable/disable toggle gates MCP access but did not restrict client registrations, meaning the endpoint is reachable regardless of whether MCP access is enabled on the instance. This issue has been patched in versions 1.123.32, 2.17.4, and 2.18.1. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.32, 2.17.4, and 2.18.1, an authenticated user with permission to create or modify workflows could achieve global prototype pollution via the XML Node leading to RCE when combined with other nodes exploiting the prototype pollution. This issue has been patched in versions 1.123.32, 2.17.4, and 2.18.1. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: platform_get_irq_byname() returns an int
platform_get_irq_byname() will return a negative value if an error
happens, so it should be checked and not just passed directly into
devm_request_threaded_irq() hoping all will be ok. |
| In the Linux kernel, the following vulnerability has been resolved:
most: core: fix resource leak in most_register_interface error paths
The function most_register_interface() did not correctly release resources
if it failed early (before registering the device). In these cases, it
returned an error code immediately, leaking the memory allocated for the
interface.
Fix this by initializing the device early via device_initialize() and
calling put_device() on all error paths.
The most_register_interface() is expected to call put_device() on
error which frees the resources allocated in the caller. The
put_device() either calls release_mdev() or dim2_release(),
depending on the caller.
Switch to using device_add() instead of device_register() to handle
the split initialization. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.32, 2.17.4, and 2.18.1, a flaw in the xml2js library used to parse XML request bodies in n8n's webhook handler allowed prototype pollution via a crafted XML payload. An authenticated user with permission to create or modify workflows could exploit this to pollute the JavaScript object prototype and, by chaining the pollution with the Git node's SSH operations, achieve remote code execution on the n8n host. This issue has been patched in versions 1.123.32, 2.17.4, and 2.18.1. |
| gopls by default communicates via pipe. However, -port and -listen flags are supported as means of debugging.
If -listen is given a value without an explicit host (e.g. :8080), or -port is used, gopls will listen on 0.0.0.0.
As a result, users might inadvertently cause gopls to bind 0.0.0.0.
This can allow a malicious party on the same network to execute code arbitrarily via gopls. |
| The bson_validate function may return early on specific inputs and incorrectly report success. This behavior could result in skipping validation for BSON data, allowing malformed or invalid UTF-8 sequences to bypass validation and be processed incorrectly. The issue may affect applications that rely on these functions to validate untrusted BSON data before further processing. This issue affects MongoDB C Driver versions prior to 1.30.5, MongoDB C Driver version 2.0.0 and MongoDB C Driver version 2.0.1 |
| The fix for CVE-2025-68161 https://logging.apache.org/security.html#CVE-2025-68161 was incomplete: it addressed hostname verification only when enabled via the log4j2.sslVerifyHostName https://logging.apache.org/log4j/2.x/manual/systemproperties.html#log4j2.sslVerifyHostName system property, but not when configured through the verifyHostName https://logging.apache.org/log4j/2.x/manual/appenders/network.html#SslConfiguration-attr-verifyHostName attribute of the <Ssl> element.
Although the verifyHostName configuration attribute was introduced in Log4j Core 2.12.0, it was silently ignored in all versions through 2.25.3, leaving TLS connections vulnerable to interception regardless of the configured value.
A network-based attacker may be able to perform a man-in-the-middle attack when all of the following conditions are met:
* An SMTP, Socket, or Syslog appender is in use.
* TLS is configured via a nested <Ssl> element.
* The attacker can present a certificate issued by a CA trusted by the appender's configured trust store, or by the default Java trust store if none is configured.
This issue does not affect users of the HTTP appender, which uses a separate verifyHostname https://logging.apache.org/log4j/2.x/manual/appenders/network.html#HttpAppender-attr-verifyHostName attribute that was not subject to this bug and verifies host names by default.
Users are advised to upgrade to Apache Log4j Core 2.25.4, which corrects this issue. |
| A flaw was found in ansible-collection-community-general. This vulnerability allows for information exposure (IE) of sensitive credentials, specifically plaintext passwords, via verbose output when running Ansible with debug modes. Attackers with access to logs could retrieve these secrets and potentially compromise Keycloak accounts or administrative access. |
