| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix starvation of scx_enable() under fair-class saturation
During scx_enable(), the READY -> ENABLED task switching loop changes the
calling thread's sched_class from fair to ext. Since fair has higher
priority than ext, saturating fair-class workloads can indefinitely starve
the enable thread, hanging the system. This was introduced when the enable
path switched from preempt_disable() to scx_bypass() which doesn't protect
against fair-class starvation. Note that the original preempt_disable()
protection wasn't complete either - in partial switch modes, the calling
thread could still be starved after preempt_enable() as it may have been
switched to ext class.
Fix it by offloading the enable body to a dedicated system-wide RT
(SCHED_FIFO) kthread which cannot be starved by either fair or ext class
tasks. scx_enable() lazily creates the kthread on first use and passes the
ops pointer through a struct scx_enable_cmd containing the kthread_work,
then synchronously waits for completion.
The workfn runs on a different kthread from sch->helper (which runs
disable_work), so it can safely flush disable_work on the error path
without deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: Fix cred ref leak in nfsd_nl_listener_set_doit().
nfsd_nl_listener_set_doit() uses get_current_cred() without
put_cred().
As we can see from other callers, svc_xprt_create_from_sa()
does not require the extra refcount.
nfsd_nl_listener_set_doit() is always in the process context,
sendmsg(), and current->cred does not go away.
Let's use current_cred() in nfsd_nl_listener_set_doit(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/sync: Cleanup partially initialized sync on parse failure
xe_sync_entry_parse() can allocate references (syncobj, fence, chain fence,
or user fence) before hitting a later failure path. Several of those paths
returned directly, leaving partially initialized state and leaking refs.
Route these error paths through a common free_sync label and call
xe_sync_entry_cleanup(sync) before returning the error.
(cherry picked from commit f939bdd9207a5d1fc55cced5459858480686ce22) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/sync: Fix user fence leak on alloc failure
When dma_fence_chain_alloc() fails, properly release the user fence
reference to prevent a memory leak.
(cherry picked from commit a5d5634cde48a9fcd68c8504aa07f89f175074a0) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: samsung-dsim: Fix memory leak in error path
In samsung_dsim_host_attach(), drm_bridge_add() is called to add the
bridge. However, if samsung_dsim_register_te_irq() or
pdata->host_ops->attach() fails afterwards, the function returns
without removing the bridge, causing a memory leak.
Fix this by adding proper error handling with goto labels to ensure
drm_bridge_remove() is called in all error paths. Also ensure that
samsung_dsim_unregister_te_irq() is called if the attach operation
fails after the TE IRQ has been registered.
samsung_dsim_unregister_te_irq() function is moved without changes
to be before samsung_dsim_host_attach() to avoid forward declaration. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: restore failed global reservations to subpool
Commit a833a693a490 ("mm: hugetlb: fix incorrect fallback for subpool")
fixed an underflow error for hstate->resv_huge_pages caused by incorrectly
attributing globally requested pages to the subpool's reservation.
Unfortunately, this fix also introduced the opposite problem, which would
leave spool->used_hpages elevated if the globally requested pages could
not be acquired. This is because while a subpool's reserve pages only
accounts for what is requested and allocated from the subpool, its "used"
counter keeps track of what is consumed in total, both from the subpool
and globally. Thus, we need to adjust spool->used_hpages in the other
direction, and make sure that globally requested pages are uncharged from
the subpool's used counter.
Each failed allocation attempt increments the used_hpages counter by how
many pages were requested from the global pool. Ultimately, this renders
the subpool unusable, as used_hpages approaches the max limit.
The issue can be reproduced as follows:
1. Allocate 4 hugetlb pages
2. Create a hugetlb mount with max=4, min=2
3. Consume 2 pages globally
4. Request 3 pages from the subpool (2 from subpool + 1 from global)
4.1 hugepage_subpool_get_pages(spool, 3) succeeds.
used_hpages += 3
4.2 hugetlb_acct_memory(h, 1) fails: no global pages left
used_hpages -= 2
5. Subpool now has used_hpages = 1, despite not being able to
successfully allocate any hugepages. It believes it can now only
allocate 3 more hugepages, not 4.
With each failed allocation attempt incrementing the used counter, the
subpool eventually reaches a point where its used counter equals its
max counter. At that point, any future allocations that try to
allocate hugeTLB pages from the subpool will fail, despite the subpool
not having any of its hugeTLB pages consumed by any user.
Once this happens, there is no way to make the subpool usable again,
since there is no way to decrement the used counter as no process is
really consuming the hugeTLB pages.
The underflow issue that the original commit fixes still remains fixed
as well.
Without this fix, used_hpages would keep on leaking if
hugetlb_acct_memory() fails. |
| Insufficient policy enforcement in WebUI in Google Chrome on Linux, Mac, Windows, ChromeOS prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup: fix race between task migration and iteration
When a task is migrated out of a css_set, cgroup_migrate_add_task()
first moves it from cset->tasks to cset->mg_tasks via:
list_move_tail(&task->cg_list, &cset->mg_tasks);
If a css_task_iter currently has it->task_pos pointing to this task,
css_set_move_task() calls css_task_iter_skip() to keep the iterator
valid. However, since the task has already been moved to ->mg_tasks,
the iterator is advanced relative to the mg_tasks list instead of the
original tasks list. As a result, remaining tasks on cset->tasks, as
well as tasks queued on cset->mg_tasks, can be skipped by iteration.
Fix this by calling css_set_skip_task_iters() before unlinking
task->cg_list from cset->tasks. This advances all active iterators to
the next task on cset->tasks, so iteration continues correctly even
when a task is concurrently being migrated.
This race is hard to hit in practice without instrumentation, but it
can be reproduced by artificially slowing down cgroup_procs_show().
For example, on an Android device a temporary
/sys/kernel/cgroup/cgroup_test knob can be added to inject a delay
into cgroup_procs_show(), and then:
1) Spawn three long-running tasks (PIDs 101, 102, 103).
2) Create a test cgroup and move the tasks into it.
3) Enable a large delay via /sys/kernel/cgroup/cgroup_test.
4) In one shell, read cgroup.procs from the test cgroup.
5) Within the delay window, in another shell migrate PID 102 by
writing it to a different cgroup.procs file.
Under this setup, cgroup.procs can intermittently show only PID 101
while skipping PID 103. Once the migration completes, reading the
file again shows all tasks as expected.
Note that this change does not allow removing the existing
css_set_skip_task_iters() call in css_set_move_task(). The new call
in cgroup_migrate_add_task() only handles iterators that are racing
with migration while the task is still on cset->tasks. Iterators may
also start after the task has been moved to cset->mg_tasks. If we
dropped css_set_skip_task_iters() from css_set_move_task(), such
iterators could keep task_pos pointing to a migrating task, causing
css_task_iter_advance() to malfunction on the destination css_set,
up to and including crashes or infinite loops.
The race window between migration and iteration is very small, and
css_task_iter is not on a hot path. In the worst case, when an
iterator is positioned on the first thread of the migrating process,
cgroup_migrate_add_task() may have to skip multiple tasks via
css_set_skip_task_iters(). However, this only happens when migration
and iteration actually race, so the performance impact is negligible
compared to the correctness fix provided here. |
| Insufficient data validation in InterestGroups in Google Chrome prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| Insufficient policy enforcement in Downloads in Google Chrome prior to 148.0.7778.96 allowed a local attacker to bypass navigation restrictions via a crafted HTML page. (Chromium security severity: Medium) |
| Inappropriate implementation in Navigation in Google Chrome prior to 148.0.7778.96 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: Medium) |
| Insufficient policy enforcement in DevTools in Google Chrome prior to 148.0.7778.96 allowed a remote attacker to potentially perform a sandbox escape via malicious network traffic. (Chromium security severity: Low) |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_tcm: Fix NULL pointer dereferences in nexus handling
The `tpg->tpg_nexus` pointer in the USB Target driver is dynamically
managed and tied to userspace configuration via ConfigFS. It can be
NULL if the USB host sends requests before the nexus is fully
established or immediately after it is dropped.
Currently, functions like `bot_submit_command()` and the data
transfer paths retrieve `tv_nexus = tpg->tpg_nexus` and immediately
dereference `tv_nexus->tvn_se_sess` without any validation. If a
malicious or misconfigured USB host sends a BOT (Bulk-Only Transport)
command during this race window, it triggers a NULL pointer
dereference, leading to a kernel panic (local DoS).
This exposes an inconsistent API usage within the module, as peer
functions like `usbg_submit_command()` and `bot_send_bad_response()`
correctly implement a NULL check for `tv_nexus` before proceeding.
Fix this by bringing consistency to the nexus handling. Add the
missing `if (!tv_nexus)` checks to the vulnerable BOT command and
request processing paths, aborting the command gracefully with an
error instead of crashing the system. |
| In the Linux kernel, the following vulnerability has been resolved:
NFC: pn533: bound the UART receive buffer
pn532_receive_buf() appends every incoming byte to dev->recv_skb and
only resets the buffer after pn532_uart_rx_is_frame() recognizes a
complete frame. A continuous stream of bytes without a valid PN532 frame
header therefore keeps growing the skb until skb_put_u8() hits the tail
limit.
Drop the accumulated partial frame once the fixed receive buffer is full
so malformed UART traffic cannot grow the skb past
PN532_UART_SKB_BUFF_LEN. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: fsl-imx8mq-usb: set platform driver data
Add missing platform_set_drvdata() as the data will be used in remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spidev: fix lock inversion between spi_lock and buf_lock
The spidev driver previously used two mutexes, spi_lock and buf_lock,
but acquired them in different orders depending on the code path:
write()/read(): buf_lock -> spi_lock
ioctl(): spi_lock -> buf_lock
This AB-BA locking pattern triggers lockdep warnings and can
cause real deadlocks:
WARNING: possible circular locking dependency detected
spidev_ioctl() -> mutex_lock(&spidev->buf_lock)
spidev_sync_write() -> mutex_lock(&spidev->spi_lock)
*** DEADLOCK ***
The issue is reproducible with a simple userspace program that
performs write() and SPI_IOC_WR_MAX_SPEED_HZ ioctl() calls from
separate threads on the same spidev file descriptor.
Fix this by simplifying the locking model and removing the lock
inversion entirely. spidev_sync() no longer performs any locking,
and all callers serialize access using spi_lock.
buf_lock is removed since its functionality is fully covered by
spi_lock, eliminating the possibility of lock ordering issues.
This removes the lock inversion and prevents deadlocks without
changing userspace ABI or behaviour. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel/uncore: Fix die ID init and look up bugs
In snbep_pci2phy_map_init(), in the nr_node_ids > 8 path,
uncore_device_to_die() may return -1 when all CPUs associated
with the UBOX device are offline.
Remove the WARN_ON_ONCE(die_id == -1) check for two reasons:
- The current code breaks out of the loop. This is incorrect because
pci_get_device() does not guarantee iteration in domain or bus order,
so additional UBOX devices may be skipped during the scan.
- Returning -EINVAL is incorrect, since marking offline buses with
die_id == -1 is expected and should not be treated as an error.
Separately, when NUMA is disabled on a NUMA-capable platform,
pcibus_to_node() returns NUMA_NO_NODE, causing uncore_device_to_die()
to return -1 for all PCI devices. As a result,
spr_update_device_location(), used on Intel SPR and EMR, ignores the
corresponding PMON units and does not add them to the RB tree.
Fix this by using uncore_pcibus_to_dieid(), which retrieves topology
from the UBOX GIDNIDMAP register and works regardless of whether NUMA
is enabled in Linux. This requires snbep_pci2phy_map_init() to be
added in spr_uncore_pci_init().
Keep uncore_device_to_die() only for the nr_node_ids > 8 case, where
NUMA is expected to be enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
media: solo6x10: Check for out of bounds chip_id
Clang with CONFIG_UBSAN_SHIFT=y noticed a condition where a signed type
(literal "1" is an "int") could end up being shifted beyond 32 bits,
so instrumentation was added (and due to the double is_tw286x() call
seen via inlining), Clang decides the second one must now be undefined
behavior and elides the rest of the function[1]. This is a known problem
with Clang (that is still being worked on), but we can avoid the entire
problem by actually checking the existing max chip ID, and now there is
no runtime instrumentation added at all since everything is known to be
within bounds.
Additionally use an unsigned value for the shift to remove the
instrumentation even without the explicit bounds checking.
[hverkuil: fix checkpatch warning for is_tw286x] |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix memory leak on failure path
cfg80211_inform_bss_frame() may return NULL on failure. In that case,
the allocated buffer 'buf' is not freed and the function returns early,
leading to potential memory leak.
Fix this by ensuring that 'buf' is freed on both success and failure paths. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: Clear reconnect pending bit
When canceling the reconnect worker, care must be taken to reset the
reconnect-pending bit. If the reconnect worker has not yet been
scheduled before it is canceled, the reconnect-pending bit will stay
on forever. |
