| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Ebyte gateway product's vendor configuration utility does not require authentication before
allowing certain disruptive administrative actions when default
credentials remain configured. An unauthenticated attacker on the
adjacent network could reboot the device or restore factory settings,
resulting in a loss of configuration and service availability. |
| gitoxide before 0.52.1 follows symlinks when reading the worktree .gitmodules file, allowing attackers to inject out-of-repository bytes into submodule metadata. Attackers can create a malicious repository with a symlinked .gitmodules pointing outside the repository tree, causing gitoxide to parse arbitrary external files as submodule configuration and expose attacker-controlled name, path, and url values. |
| Incorrect access control in the Forgot Your Password function of eMudhra emSigner v2.8.7 allows unauthenticated attackers to access accounts of all registered users, including those with administrator privileges via a crafted password reset token. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wlcore: enable the right set of ciphers
The firmware version number check for IGTK introduced in
commit c34dbc5900b0 ("wifi: wlcore: Add support for IGTK key")
lets the amount of ciphers decrease on every boot of a too old firmware and
that is practically happening. It also does not take into account other
chips than the wl18xx. On some wl128x, the following can be observed
when connecting via nm to a common ap:
[ 484.113311] wlcore: WARNING could not set keys
[ 484.117828] wlcore: ERROR Could not add or replace key
[ 484.123016] wlan0: failed to set key (5, ff:ff:ff:ff:ff:ff) to hardware (-5)
[ 484.123046] wlcore: Hardware recovery in progress. FW ver: Rev 7.3.10.0.142
[ 484.139923] wlcore: pc: 0x0, hint_sts: 0x00000048 count: 1
[ 484.145721] wlcore: down
[ 484.148986] ieee80211 phy0: Hardware restart was requested
[ 484.610473] wlcore: firmware booted (Rev 7.3.10.0.142)
[ 484.633758] wlcore: Association completed.
[ 484.690490] wlcore: ERROR command execute failure 14
[ 484.690490] ------------[ cut here ]------------
[ 484.700195] WARNING: drivers/net/wireless/ti/wlcore/main.c:872 at wl12xx_queue_recovery_work+0x64/0x74 [wlcore], CPU#0: kworker/0:0/892
This repeats endlessly.
Always disable IGTK on wl12xx and fix the decrementing mess. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/rockchip: dw_dp: Fix null-ptr-deref in dw_dp_remove()
Attempting to access driver data in the platform driver ->remove()
callback may lead to a null pointer dereference since there is no
guaranty that the component ->bind() callback invoking
platform_set_drvdata() was executed.
A common scenario is when Rockchip DRM driver didn't manage to run
component_bind_all() because of an (unrelated) error causing early
return from rockchip_drm_bind().
Drop the unnecessary call to platform_get_drvdata() and, instead,
reference the target device structure via platform_device. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: sco: Fix a race condition in sco_sock_timeout()
sco_sock_timeout() runs asynchronously and lock_sock(sk). If the socket
is closing while the timer is running, it holds the same lock
(lock_sock(sk)) twice, leading to a deadlock.
CPU 0 CPU 1
==================== ======================
sco_sock_close()
sco_sock_timeout()
lock_sock(sk) // <-- LOCK
__sco_sock_close()
sco_chan_del()
sco_conn_put()
sco_conn_free()
disable_delayed_work_sync()
lock(sk) // <-- SAME LOCK
Fix this by moving disable_delayed_work_sync() outside of lock_sock(sk),
ensuring that no lock_sock(sk) is held before sco_sock_timeout().
Lockdep splat:
WARNING: possible circular locking dependency detected
6.13.0-rc4 #7 Not tainted
syz-executor292/9514 is trying to acquire lock:
ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: rcu_lock_acquire sect/v6.13-rc4/./include/linux/rcupdate.h:337 [inline]
ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: rcu_read_lock sect/v6.13-rc4/./include/linux/rcupdate.h:849 [inline]
ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: start_flush_work sect/v6.13-rc4/kernel/workqueue.c:4137 [inline]
ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: __flush_work+0xd1/0xc40 sect/v6.13-rc4/kernel/workqueue.c:4195
but task is already holding lock:
ffff88807db3a258 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at: lock_sock sect/v6.13-rc4/./include/net/sock.h:1623 [inline]
ffff88807db3a258 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at: sco_sock_close+0x25/0x100 sect/v6.13-rc4/net/bluetooth/sco.c:524
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}:
lock_acquire+0x1c4/0x520 sect/v6.13-rc4/kernel/locking/lockdep.c:5849
lock_sock_nested+0x48/0x130 sect/v6.13-rc4/net/core/sock.c:3622
lock_sock sect/v6.13-rc4/./include/net/sock.h:1623 [inline]
sco_sock_timeout+0xbe/0x270 sect/v6.13-rc4/net/bluetooth/sco.c:158
process_one_work sect/v6.13-rc4/kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa99/0x18f0 sect/v6.13-rc4/kernel/workqueue.c:3310
worker_thread+0x8a9/0xd80 sect/v6.13-rc4/kernel/workqueue.c:3391
kthread+0x2c6/0x360 sect/v6.13-rc4/kernel/kthread.c:389
ret_from_fork+0x4e/0x80 sect/v6.13-rc4/arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 sect/v6.13-rc4/arch/x86/entry/entry_64.S:244
-> #0 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}:
check_prev_add sect/v6.13-rc4/kernel/locking/lockdep.c:3161 [inline]
check_prevs_add sect/v6.13-rc4/kernel/locking/lockdep.c:3280 [inline]
validate_chain+0x1888/0x5760 sect/v6.13-rc4/kernel/locking/lockdep.c:3904
__lock_acquire+0x13b4/0x2120 sect/v6.13-rc4/kernel/locking/lockdep.c:5226
lock_acquire+0x1c4/0x520 sect/v6.13-rc4/kernel/locking/lockdep.c:5849
touch_work_lockdep_map sect/v6.13-rc4/kernel/workqueue.c:3909 [inline]
start_flush_work sect/v6.13-rc4/kernel/workqueue.c:4163 [inline]
__flush_work+0x70f/0xc40 sect/v6.13-rc4/kernel/workqueue.c:4195
__cancel_work_sync sect/v6.13-rc4/kernel/workqueue.c:4351 [inline]
disable_delayed_work_sync+0xbb/0xf0 sect/v6.13-rc4/kernel/workqueue.c:4514
sco_conn_free sect/v6.13-rc4/net/bluetooth/sco.c:95 [inline]
kref_put sect/v6.13-rc4/./include/linux/kref.h:65 [inline]
sco_conn_put+0x18f/0x270 sect/v6.13-rc4/net/bluetooth/sco.c:107
sco_chan_del+0xe2/0x210 sect/v6.13-rc4/net/bluetooth/sco.c:236
sco_sock_close+0x8f/0x100 sect/v6.13-rc4/net/bluetooth/sco.c:526
sco_sock_release+0x62/0x2d0 sect/v6.13-rc4/net/blueto
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: LAG, MPESW, Fix missing complete() on devcom error
mlx5_mpesw_work() returned without calling complete() when
mlx5_lag_get_devcom_comp() returned NULL. A caller that queued the
work and waited on mpesww->comp would block indefinitely.
Funnel the early-return path through a new "complete" label so the
waiter is always woken. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: check if dml21_add_phantom_plane() is successful
Verify that the phantom plane was allocated to avoid a later
segfault.
(cherry picked from commit 5adb54abe5a8e82cbff7f8806db30a5f4924329f) |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: max17040: handle missing status supplier
MAX17040 does not report charger state itself, so the driver forwards
POWER_SUPPLY_PROP_STATUS to a supplier power supply. If no supplier is
registered, power_supply_get_property_from_supplier() returns -ENODEV and
leaves the output value untouched.
max17040_get_property() currently ignores that error and returns success,
so userspace can read an uninitialized status value from the battery power
supply. This happens on systems that use the fuel gauge without a charger
supplier relationship in firmware.
Return POWER_SUPPLY_STATUS_UNKNOWN when no supplier provides STATUS, and
propagate other supplier lookup errors. |
| An improper neutralization of input during web page generation ('Cross-site Scripting') vulnerability in extract domain in Synology Chat Server before 2.4.5-22148 allows remote authenticated users, via a UI interaction, to read or write restricted files and conduct limited denial-of-service attacks in DSM. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: mglru: fix stale batch updates after memcg reparenting
The mglru page table walker batches per-generation size deltas in
walk->nr_pages while walking page tables without holding the lruvec lock.
The reset_batch_size() later folds those deltas into walk->lruvec under
the lruvec lock.
The page table walker can run concurrently with the memcg reparenting path
as follows:
CPU0 CPU1
==== ====
walk_mm
--> walk_page_range
--> update_batch_size
--> walk->nr_pages += delta
mem_cgroup_css_offline
--> memcg_reparent_objcgs
--> lock lruvec
lru_gen_reparent_memcg
--> reparent child folios to parent
unlock lruvec
lock lruvec
reset_batch_size
--> child lrugen->nr_pages += delta
This will trigger the following warning in lru_gen_exit_memcg():
VM_WARN_ON_ONCE(memchr_inv(lruvec->lrugen.nr_pages, 0,
sizeof(lruvec->lrugen.nr_pages)));
And the user-visible impact of underestimated nr_pages in MGLRU was
premature OOMs because MGLRU does not try to reclaim memory when nr_pages
reaches zero, but there are still more pages.
To fix it, make reset_batch_size() check CSS_DYING under RCU before
flushing the pending batch. A non-dying memcg keeps the original lruvec
stable against RCU-delayed offlining; a dying memcg redirects the deltas
to the first non-dying ancestor. |
| gitoxide before 0.69.0 contains unchecked array indexing in delta application and uncapped allocation from attacker-controlled size headers in gix-pack. Attackers can send crafted pack data during clone or fetch operations to trigger panics or out-of-memory process kills. |
| Incorrect access control in the AdHoc User creation form of eMudhra emSigner v2.8.7 allows unauthenticated attackers to arbitrarily modify usernames and privileges by using the email address of a registered user. |
| An authorization bypass vulnerability exists in Zimbra Collaboration (ZCS) before 10.1.17 due to improper authorization validation in delegated email sending functionality. An authenticated attacker can send specially crafted SOAP requests to impersonate another user and send emails without possessing the required delegation or send-as permissions. This occurs in the SaveDraftRequest SOAP handler. |
| In Zimbra Collaboration (ZCS) before 10.1.17, a stored cross-site scripting (XSS) vulnerability exists in the Zimbra Classic Web Client due to insufficient sanitization of specific attachment content during inline preview. An attacker can send a crafted email containing a malicious attachment that, when previewed by a user, executes arbitrary JavaScript within the victim's browser session. Successful exploitation may allow an attacker to perform unauthorized actions on behalf of the victim user, potentially leading to data exfiltration or unauthorized access to sensitive information. |
| In Zimbra Collaboration (ZCS) before 10.1.17, a path traversal vulnerability exists in the Zimbra Briefcase document editing functionality due to improper validation of the packages parameter. An authenticated attacker can exploit this vulnerability by supplying a crafted path traversal sequence, potentially allowing unauthorized disclosure of sensitive files within the web application directory. |
| SvelteKit versions from 2.49.0 through 2.53.2 (fixed in 2.53.3) contain a deserialization expansion issue in the experimental form remote function. When an application enables experimental.remoteFunctions and uses the form function to process the files array without validating files.length or individual file sizes, an attacker can submit relatively small inputs that expand into very large file arrays, leading to expensive processing and denial of service. |
| Insecure Direct Object References (IDOR) in eMudhra emSigner v2.8.7 allow authenticated attackers to gain unauthorized access to application content and view sensitive data of other users via manipulation of the documentID and EncryptedDocumentId parameters. |
| In Zimbra Collaboration before 10.1.17, a local file inclusion (LFI) vulnerability exists in the Zimbra Classic Web Client due to improper validation of the fu request parameter. An unauthenticated attacker can exploit this vulnerability by supplying a crafted path, potentially allowing unauthorized disclosure of protected files, such as WEB-INF/web.xml, within the web application directory. This occurs in the Forward servlet. |
| A flaw was found in the file-iff (IFF/ILBM) plugin in GIMP. When processing a specially crafted IFF/ILBM image file, the plugin does not properly validate the HAM row size and improperly handles cases where the number of color planes (nPlanes) is zero. This causes a row size mismatch that bypasses memory bounds checking, resulting in heap out-of-bounds reads. This issue can result in an application crash, leading to a denial of service or a limited information disclosure of heap memory contents. |
