| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: reload TDLS header pointer after skb_linearize()
ieee80211_process_tdls_channel_switch() sets tf = skb->data before it
calls skb_linearize(), and reads tf->action_code afterwards.
ieee80211_rx_h_data() queues TDLS channel switch requests and
responses to the interface after pulling only
offsetof(struct ieee80211_tdls_data, u) bytes, so the skb can still be
non-linear when the interface work handles it. Drivers that build
paged RX skbs do this for every frame that does not fit into the skb
head, e.g. iwlwifi (mvm), which is also the only mac80211 driver
that sets NL80211_FEATURE_TDLS_CHANNEL_SWITCH. If the remaining data
does not fit into the tailroom, skb_linearize() moves the data to a
new head and frees the old one, and the action code is then read from
freed memory. Depending on what that memory holds by then, the frame
is handled as before or ends in the WARN_ON_ONCE() of the default
case.
The frame only has to be a data frame with the TDLS ethertype from an
authorized peer, e.g. relayed by the AP from another station in the
BSS; the read happens before the sender is checked to be a TDLS peer.
Load tf after skb_linearize(), as the request and response handlers
already do.
Found by static analysis tool CodeQL. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: reinstate IEEE80211_TX_CTL_AMPDU flag in ieee80211_tx_prep_agg()
The commit 592234e941f1 ("wifi: mac80211: Fix iTXQ AMPDU fragmentation
handling") changed the way handling of the IEEE80211_TX_CTL_AMPDU flag
is done in mac80211, so the only place it is set is in
ieee80211_tx_dequeue().
This means that any frames that are sent to the driver via drv_tx() will
no longer have the flag set. In particular, this affects packets going
through ieee80211_tx_pending(). Evan reported that this can result in
the ath9k driver failing to account such packets in its block ack
window, eventually overrunning the window and stalling TX.
Fix this by reinstating the flag in ieee80211_tx_prep_agg() when inside
a valid block ack window. This should be harmless for the TXQ path, and
will reinstate the previous behaviour for drivers that use the flag as a
signal to track the packet in the window. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: aic79xx: Fix NULL pointer dereference in device reset
Since commit c67e63800446 ("scsi: aic79xx: Do not reference SCSI command
when resetting device") the device reset SCB has no SCSI command, but
ahd_linux_dev_reset() still sets its residual, and ahd_abort_scbs(), which
completes it, sets its status. Seen on an AIC-7902 when a failing disk
triggered a device reset, which killed the SCSI error handler:
BUG: kernel NULL pointer dereference, address: 0000009c
EIP: ahd_linux_dev_reset.cold+0xee/0x26e
Add NULL command checks to the accessors in aic79xx_osm.h. Also skip
autosense for an SCB without a command and complete it with ahd_done()
right away: the REQUEST SENSE path can clear SCB_DEVICE_RESET, after which
ahd_done() would dereference the missing command. |
| In the Linux kernel, the following vulnerability has been resolved:
9p/xen: validate the response size from the backend
p9_xen_response() takes the length of an incoming response from the ring
-- the first field of the 9p header, which the Xen transport reuses as
its framing header -- and uses it to advance the consumer index, but
never checks that it is at least the header size or no larger than the
number of bytes the backend has actually produced.
A malicious or buggy backend can post a response whose size is smaller
than the header (for example 0). The consumer index then never advances,
so the response work re-reads the same ring contents instead of making
progress. In testing this raced with the teardown that the malformed
reply triggers and dereferenced a freed p9_client:
9pfs 9pfs-0: Wrong req tag=ffff
BUG: kernel NULL pointer dereference, address: 0000000000000060
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 7.2.0-rc5 #6 PREEMPT(lazy)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
Workqueue: events p9_xen_response
RIP: 0010:idr_find+0x4/0x10
RSP: 0018:ffffbf5d80063de8 EFLAGS: 00010202
RAX: 0000000000000001 RBX: ffffa229c21195a0 RCX: ffffa229c2400000
RDX: ffffa229c11c2200 RSI: 000000000000ffff RDI: 0000000000000050
RBP: 000000000000ffff R08: 3fffffffffffdfff R09: ffffffffffffffff
R10: 3fffffffffffdfff R11: ffffffff87a60e80 R12: 0000000000000050
R13: 0000000000000000 R14: 000000000000ffff R15: 0000000000100000
FS: 0000000000000000(0000) GS:ffffa22a7661c000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000060 CR3: 000000003ac34002 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
p9_tag_lookup+0x2b/0x90
p9_xen_response+0x17c/0x2e0
process_one_work+0x16a/0x3a0
worker_thread+0x172/0x2e0
kthread+0xdd/0x110
ret_from_fork+0x18b/0x240
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in:
CR2: 0000000000000060
---[ end trace 0000000000000000 ]---
Reject a response whose size is outside [sizeof(header), queued] before
using it, matching the validation the backend already applies to
incoming requests. |
| In the Linux kernel, the following vulnerability has been resolved:
9p: don't decrement a server-owned zero nlink
A 9P2000.L server can report nlink=0 for a regular file that still
exists. On a cache=loose or cache=fscache mount, lookup stores that
value with set_nlink(). A later successful unlink calls
v9fs_dec_count(), which still calls drop_nlink() for a non-directory.
drop_nlink() warns, and the unsigned link count wraps to 4294967295.
fstat() on a descriptor opened before the unlink shows 0 before and
4294967295 after.
The warning on the unpatched kernel, trimmed:
WARNING: fs/inode.c:408 at drop_nlink+0xac/0xd0, CPU#1: trigger/188
CPU: 1 UID: 0 PID: 188 Comm: trigger Tainted: G N 7.3.0-rc4-00537-ga3ff15db6820 #1 PREEMPT(lazy)
RIP: 0010:drop_nlink+0xac/0xd0
Call Trace:
<TASK>
v9fs_remove+0x529/0x750
vfs_unlink+0x2f0/0xbd0
filename_unlinkat+0x340/0x6c0
__x64_sys_unlink+0x46/0x70
do_syscall_64+0xe8/0x4f0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
---[ end trace 0000000000000000 ]---
Directories whose cached nlink is at most 2 already skip this
decrement, because the exported filesystem may not maintain nlink
(commit ac89b2ef9b559). cache=none skips it as well (commit
574aa0b479947). cache=mmap does not take this path: it sets neither
CACHE_META nor CACHE_LOOSE. A regular file on cache=loose or
cache=fscache still does. Its count came from GETATTR and may
already be zero, so skip the decrement when i_nlink is already 0.
Verified on 7.3-rc4-00537-ga3ff15db6820 with only this change. A
server that advertises nlink=0 and accepts the unlink no longer
warns, and the open descriptor stays at nlink 0. An honest server
on the same mount still goes from 1 to 0. A rejected unlink leaves
the count unchanged. cache=none is unchanged. With panic_on_warn
the unpatched kernel panics on the warning; the patched kernel does
not. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: mcast: validate tracker padding before forwarding
A multicast tracker with an even number of destinations needs two
padding bytes after its destination list. batadv_mcast_forw_packet()
currently only checks that the count field and the addresses fit in
the tracker TVLV.
If an unpadded even tracker is compacted to an odd number of
destinations, batadv_mcast_forw_shrink_update_headers() includes those
missing padding bytes in the amount to remove. The subsequent memmove
can then write two bytes past the old packet tail. With no tailroom,
this corrupts skb_shared_info.
Include the required padding in the existing tracker length check.
This rejects the malformed tracker before either received or locally
generated packets can reach the compactor. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: stop originator purge worker before freeing TT
batadv_mesh_free() releases the translation tables via batadv_tt_free()
before batadv_originator_free() stops orig_work. The purge worker can
therefore still run while the TT is torn down. When an originator times
out, batadv_purge_orig_ref() calls batadv_tt_global_del_orig(), which
loads tt.global_hash and walks all buckets while taking their locks:
CPU0 CPU1
batadv_tt_free() batadv_purge_orig()
batadv_tt_global_del_orig()
hash = ...tt.global_hash;
batadv_tt_global_table_free()
batadv_hash_destroy(hash);
spin_lock_bh(&hash->list_locks[i]);
Disable orig_work at the beginning of batadv_mesh_free(), directly after
the mesh was marked as deactivating. The second
disable_delayed_work_sync() in batadv_originator_free() is harmless because
it is free'd anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tt: don't drop local events queued during TVLV update
batadv_tt_tvlv_container_update() read the number of local changes without
holding changes_list_lock. batadv_tt_local_event() is not serialized by
the commit_lock and can queue new events before the changes_list is
flushed:
CPU0 CPU1
batadv_tt_tvlv_container_update()
num = ...local_changes;
batadv_tt_local_event()
list_add_tail(...);
...local_changes++;
spin_lock_bh(&...changes_list_lock);
/* only num events copied but all freed */
The additional events were freed without ever being sent. Other nodes will
only notice this via a CRC mismatch and must request the full table.
The number of changes and the changes_list must therefore be taken
atomically. Events queued afterwards then stay in the tt.changes_list for
the next TT round.
The changes can no longer be kept for the next round when the TVLV buffer
allocation fails. But they would be sent with a skipped TTVN anyway, so the
other nodes have to request the full table in this case either way. The
last changeset is only dropped in this case when the TTVN was incremented.
Without new changes, it still describes the current TTVN.
Previously, the unconsumed changes caused a retry of the TVLV container
update in the next commit round. Since the changes are now consumed, the
next round would only take the path without changes and wait for
BATADV_TT_OGM_APPEND_MAX rounds before updating the container again. Until
then, the outdated container with the previous TTVN would still be
announced. The ogm_append_cnt is therefore reset on failure to retry the
update in the next OGM interval.
This doesn't make the CRC consistent with the announced changeset. The
local table modifications are still not serialized with the commit and
batadv_tt_local_transition_new() can still make a client part of the CRC
for which the event is only part of the next TT round. Such an
inconsistency is detected by the CRC check of the other nodes and solved
via a full table request. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: sysfs: restore NOFS context on early return in btrfs_sysfs_add_block_group_type()
btrfs_sysfs_add_block_group_type() sets up a NOFS context with
memalloc_nofs_save() because kobject_add() performs GFP_KERNEL
allocations deep in its call chain, and the function may be called
while holding a transaction handle or a lock required for a
transaction commit, where reclaim could deadlock.
Every other return path of this function calls memalloc_nofs_restore()
except the early return taken when another thread has already created
the kobject for the same raid index (this can happen when restriping).
Taking that path leaves PF_MEMALLOC_NOFS set on the calling task, so
all subsequent memory allocations performed by that task remain
restricted to the NOFS scope, which may lead to unexpected allocation
failures or deadlocks later on.
Restore the NOFS context before returning from that path. |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: fix use-after-free in extts_fifo_show() reading tsevqs unlocked
extts_fifo_show() walks ptp->tsevqs with list_count_nodes() and then
list_first_entry() without holding ptp->tsevqs_lock, the spinlock that
"protects tsevqs from concurrent access". Every other accessor of the
list honours it: ptp_open() (list_add_tail), ptp_release() (list_del
followed by kfree of the per-fd queue), ptp_clock_release() and
ptp_clock_event() all take tsevqs_lock. extts_fifo_show() is the only
one that does not.
A per-fd timestamp queue is appended to tsevqs on open("/dev/ptpN") and
removed and freed on close(), both under tsevqs_lock:
scoped_guard(spinlock_irq, &ptp->tsevqs_lock)
list_del(&queue->qlist);
bitmap_free(queue->mask);
kfree(queue);
So a read of /sys/class/ptp/ptpN/fifo running concurrently with a
close() of a /dev/ptpN fd can have list_count_nodes() walk into the
queue that close() is removing and freeing, dereferencing freed memory
(use-after-free) or a poisoned list pointer.
Take tsevqs_lock around the list walk. The fifo only ever draws from the
first queue, which is the registration-time queue created in
ptp_clock_register() and freed only in ptp_clock_release(); that cannot
run while the sysfs attribute is being read, so the dequeue from
queue->buf under queue->lock may stay outside tsevqs_lock and the lock
order is unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: enforce the read-only share flag when creating a stream
When a share is read-only, smb2_open() rejects opens that would create
or truncate a file. Creating a named stream on an existing file with
streams_xattr sets neither O_CREAT nor O_TRUNC, so it passes this check,
and smb2_set_stream_name_xattr() then creates the stream. On a Time
Machine share, opening a missing AFP_AfpInfo stream also writes one. A
user who can write a file at the filesystem level can therefore add
streams to it through a read-only share.
Do not create a stream or synthesize AFP_AfpInfo when the share is not
writable. Existing streams still open normally, and a missing stream
opened with FILE_OPEN still returns STATUS_OBJECT_NAME_NOT_FOUND. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: revert fsids on durable reconnect and replay failure
On a durable handle reconnect or a request replay, smb2_open() switches
to the SMB user's fsids before calling ksmbd_vfs_getattr(). If that call
fails, the code jumps to err_out2 and skips ksmbd_revert_fsids() at
err_out1. The user's credentials then stay installed on the shared ksmbd
worker. Later work on that worker, including other users' requests, runs
with the first user's fsuid, fsgid and supplementary groups.
ksmbd_free_work_struct() also warns, because work->saved_cred is still
set.
Jump to err_out1 instead. No path is held at this point, so skipping the
path_put() at err_out is correct. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix NULL pointer dereference in session_user_name() and session_account_type()
session_user_name() and session_account_type() dereference
session->user without checking for NULL. A session can be published
and exposed via the procfs session interface before authentication
completes, during which session->user is NULL:
show_proc_session() -> session_user_name(sess)
-> user_guest(session->user) -> NULL->flags -> oops
Guard both functions by treating a NULL session->user as an explicit
not-yet-authenticated state rather than dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: Intel: hda-sdw-bpt: Stop active DMA before closing BPT streams
When sdw_enable_stream() fails in intel_ace2x_bpt_send_async() after
hda_sdw_bpt_send_async() has already started the TX and RX DMA streams,
intel_ace2x_bpt_close_stream() invokes hda_sdw_bpt_close() directly
without calling hda_sdw_bpt_wait(). As a result,
hda_sdw_bpt_dma_deprepare() tears down the DMA buffers and BDL while
the DMA hardware is still running.
Disable any running TX or RX BPT DMA stream at the start of
hda_sdw_bpt_close() before unmapping channels and depreparing DMA
resources. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: grant a POSIX ACL group entry only to the group's members
When no ACE of the DACL matches the caller, Everyone or Authenticated
Users, smb_check_perm_dacl() falls back to the file's POSIX ACL. It
takes the first ACL_USER or ACL_GROUP entry whose id equals the
caller's uid. For ACL_GROUP, this compares a gid with the caller's uid.
A numerical match grants the group's permissions even when the caller
is not a member.
Match a group entry only when the caller is also in the group. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/shmem: fix truncate hang in large swap entry
Truncating a tmpfs file or memfd to a page-aligned size inside a large
swap entry can loop indefinitely in shmem_undo_range(). The task holds
the inode lock and cannot be killed.
A large swap entry represents a whole swapped-out folio. For example,
truncate a file whose pages 0-7 share one swap entry to four pages:
[ 0 1 2 3 | 4 5 6 7 ]
keep | discard
^
new EOF, start = 4
i_size has already been updated when boundary handling asks
shmem_get_partial_folio() for page 4. Since it is swapped out, the helper
calls shmem_get_folio() with SGP_READ. That rejects page 4 with -EINVAL
because its starting offset equals i_size. Nothing is read back.
The final scan cannot free the entry without losing pages 0-3. It skips
it, restarts from start = 4, and finds it again indefinitely. An unaligned
truncate avoids this particular failure because the requested page starts
below i_size. Folios already in the page-cache cannot trigger it as the
direct lookup will return them beyond EOF.
Fix it by letting shmem_get_partial_folio() call shmem_swapin_folio()
directly for swap entries. This bypasses the read path's i_size check,
allowing the existing boundary handling to zero and split the folio. If
swap-in returns a smaller folio, it also splits the swap entry so the
final scan can free the entries beyond EOF. Retry the lookup if the entry
changes during swap-in.
Handling swap-in allocation failures remains broken and is unchanged by
this commit. Even when shmem_swapin_folio() correctly returns -ENOMEM
instead of -EEXIST, shmem_get_partial_folio() returns NULL and
shmem_undo_range() skips boundary handling. If the large swap entry
remains intact, truncation can still loop in the final scan, while hole
punching can return without zeroing the boundary.
This may read an entire large folio back from swap while holding
i_rwsem, only to discard part of it. Avoiding that I/O would require
splitting both the swap entry and any large folio still in the swap
cache. That, however, is much bigger work. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/shmem: fix accounting of swapin-error markers
A failed swap read replaces the swap entry with a swapin-error marker in
the page-cache and subtracts its pages from "alloced" and "swapped";
however, it leaves their block charge in place.
Removing the marker during truncate then subtracts from "swapped" again.
This can underflow the counters or make swapped reach zero while other
pages remain swapped out, causing swapoff to loop without finding them.
When installing the marker, subtract only from "swapped" and let
shmem_recalc_inode() reduce "alloced" and release the block charge.
Make shmem_free_swap() report successful removal separately from the
number of swap pages freed, so removing a swapin-error marker does not
subtract from "swapped" again.
It's a bit confusing, but replacing a swapped out page by a swapin-error
marker in shmem_set_folio_swapin_error() behaves as follows:
Initially:
alloced=1, swapped=1, nrpages=0
Calling shmem_recalc_inode(inode, 0, -1)
-> swapped = 0
-> freed = 1 - 0 - 0 = 1
-> alloced -= freed
-> alloced=0, swapped=0, block charge released |
| In the Linux kernel, the following vulnerability has been resolved:
mm/shmem: make shmem_file() check the file's inode
shmem_file() only checks if file->f_mapping is a shmem mapping. This
mapping can belong to another file, however, as with a Coda file backed
by a tmpfs container after mmap().
So it does not guarantee that the file inode is an actual shmem inode.
Seal handling and memfd preservation use this check before accessing
shmem inode state, so they can access an inode of the wrong type.
Let's make shmem_file() check the inode's file operations instead, to
identify shmem inodes reliably. This will identify regular shmem inodes,
including memfds and ordinary tmpfs files, independently of wrapper file
operations.
Use shmem_mapping() in collapse_file() instead to not change the behavior
of collapse_file(): it operates on the page cache and uses mapping->host
for shmem inode operations. Focusing on the file does not seem relevant. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/filemap: read mapping->a_ops->free_folio under i_lock
memory_failure() -> ... -> filemap_remove_folio() can read mapping->a_ops
after the inode has been freed. Once the folio is deleted from the
pagecache it no longer pins the mapping, so after i_lock is dropped
e.g., a concurrent final iput() can evict and free the inode before
filemap_free_folio() looks up mapping->a_ops->free_folio.
Most callers hold a reference on the inode, but not all.
Documentation/filesystems/vfs.rst explicitly states that ->free_folio()
must not assume the original address_space mapping still exists.
Fix it by loading ->free_folio while i_lock is still held, similar to
what folio_unmap_invalidate() does.
Inline filemap_free_folio() into its remaining caller such that
delete_from_page_cache_batch() also just loads the callback before
dropping the i_lock.
The bug was found by code inspection and has not been reproduced.
Fix generated by an LLM and sent by Josef Bacik in private.
[ david: get rid of filemap_free_folio() entirely; improve patch description ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/rmap: handle device-exclusive entries in folio_referenced_one()
page_vma_mapped_walk() can return non-present device-exclusive entries,
but folio_referenced_one() passes them to PTE young-bit accessors that
require present PTEs.
We must neither call clear_flush_young_ptes_notify() nor
folio_pte_batch() with non-present entries. For example, clearing the
young bit on non-present PTEs can corrupt the entry: on arm64
PTE_AF overlaps the swap type, so clearing it turns a device-exclusive
entry into an ordinary swap entry.
folio_pte_batch() will VM_WARN_ON_FOLIO.
Apply the same approach as the previous fixes to e.g., damon_ptep_mkold():
treat these entries as old from the CPU's perspective and obtain their
young state through the MMU notifier.
Skip PTE batching and MGLRU look-around for non-present entries, and
don't modify non-present PTEs. |