| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| When a broker decodes a compressed record batch, the per-record decoder reads a declared body size from the decompressed stream and allocates a buffer of that size before validating it against the bytes available or any configured limit. The size is attacker-controlled, and the batch CRC does not constrain it, so a small (around 90-byte), CRC-valid compressed produce request can declare a body size of up to about 2 GiB and force the broker to attempt that allocation, raising OutOfMemoryError. The record size limit (max.message.bytes), the request size limit, and client/broker quotas bound only the compressed wire size, not the declared decompressed size.
Impact:
An authenticated principal with Write on a topic can crash broker request-handler threads (reached when a batch's codec differs from the topic's compression.type and records are re-encoded) and any consumer that fetches the record, denying service. On brokers started with -XX:+ExitOnOutOfMemoryError, a common hardening, a single crafted request terminates the broker JVM. More seriously, a crafted record is accepted at ingest and written to disk; when the log-cleaner later reads it on a compacted topic, the OutOfMemoryError (an Error, not an Exception) terminates the cleaner thread, which is not restarted. With the default of a single cleaner thread, log compaction then stops for the entire broker, including the internal __consumer_offsets and __transaction_state topics, and the condition persists across restarts until the offending record is removed. The impact is availability only; no data is disclosed or altered.
Mitigation:
Upgrade to Apache Kafka 4.2.2, 4.3.2, or 4.4.0, and set max.decompressed.message.bytes (at the broker and/or topic level) to a bounded value appropriate for your workload. Upgrading alone is not sufficient: for backward compatibility this configuration defaults to an effectively unlimited value (about 2 GiB), so a broker remains exposed until the limit is set. Choose a value at or slightly above the largest legitimate decompressed record your applications produce, and comfortably below the broker heap divided by the number of request-handler and cleaner threads. Until you can upgrade and configure the limit, restrict Write access to trusted producers; quotas and max.message.bytes do not mitigate this issue.
Resolution:
From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: the broker validates a record's declared decompressed body size against max.decompressed.message.bytes before allocating, on the produce-validation, log-compaction, and timestamp-lookup paths, and rejects oversized or negative sizes with InvalidRecordException. Operators must set this configuration to a bounded value to be protected, as its default is effectively unlimited. |
| Jenkins 2.587 and earlier, LTS 2.580.1 and earlier does not restrict item types in collections after deserialization, allowing attackers with access to POST config.xml API endpoints to submit crafted `config.xml` files that can lead to, e.g., stored cross-site scripting (XSS) vulnerabilities. |
| Jenkins 2.587 and earlier, LTS 2.580.1 and earlier checks for symbolic links in the path of an extracted file only before creating its parent directories, not immediately before writing it, and allows symbolic links in artifacts to replace existing files or empty directories, allowing attackers with Item/Configure permission to write files to arbitrary locations on the Jenkins controller file system. |
| An out-of-bounds heap read flaw was found in GIMP's TIM image loader. When a user opens a crafted 4bpp TIM image that causes promotion to an RGBA layer, the file-tim plug-in allocates an undersized row buffer but processes it using the larger RGBA row size. This can copy adjacent heap contents into the decoded image and may crash the plug-in. |
| A denial-of-service flaw was found in gnome-remote-desktop. An unauthenticated remote attacker can open RDP connections without completing the handshake and retain the connection-throttling slots indefinitely because no pre-authentication handshake deadline is enforced. By exhausting the global connection limit, an attacker can prevent new RDP clients from connecting until a holding socket is closed. |
| On a multi-user system, a user with an active local login session could downgrade a system-wide Flatpak app to an older version by removing the app's remote ref via the unprivileged system-helper RemoveLocalRef method, causing the anti-downgrade check to fail to find a reference date. A malicious local user could use this to expose other users of the same system to an app version with unfixed vulnerabilities. |
| The OCI delta stream parser read sizes as guint64 but passed them to GLib I/O and allocation functions expecting gsize (32 bits on 32-bit systems), causing undersized allocations while subsequent operations use the original 64-bit size, leading to heap buffer overflows. An attacker controlling an OCI registry can craft a delta stream that triggers this during flatpak install/update, potentially achieving code execution on 32-bit systems. |
| A malicious OCI registry can hardlink arbitrary host files into the extraction directory when a user installs or updates a Flatpak application from an OCI remote, allowing disclosure of arbitrary host file contents. For system-wide installs running as root, this includes sensitive files such as /etc/shadow. |
| If a malicious SDK container declares an extension point with a crafted `directory` path, and a developer runs `flatpak build-init --writable-sdk --sdk-extension` with that SDK, attacker-chosen files could be written outside the working directory, since the target path is resolved via a function that allows `..` traversal. |
| A flaw was found in FreeType, specifically within its CID font loader. A remote attacker could exploit this vulnerability by tricking a user into opening content that embeds or references a specially crafted CID-keyed font. This crafted font can cause repeated allocations and decryptions of subroutine data across multiple font dictionaries, leading to excessive memory and CPU consumption. This can result in a denial of service (DoS) for the application or service processing the font, potentially causing it to hang or terminate. |
| A heap-based buffer overflow was found in the DHCPv6 and TFTP response builders of libslirp. When the host is configured with a small interface MTU, a guest-supplied DHCPv6 CLIENTID option or TFTP blksize option can overflow the reply buffer with attacker-controlled content and length, resulting in denial of service and potentially arbitrary code execution in the host process. The default interface MTU is not affected. |
| A stack-based buffer overflow flaw was found in fetchmail when built with NTLM support. A malicious or compromised mail server advertising NTLM authentication can send a crafted Type 2 challenge that causes fetchmail to write past a fixed stack buffer while building the NTLM authenticate response. This may lead to remote code execution depending on stack-frame layout, or to authentication failure or process termination under memory hardening. |
| A flaw was found in the DPDK vhost library. When handling a virtio indirect descriptor table, the host reads the table length more than once from guest memory and can allocate a host copy before validating that length. A guest that changes the length between those reads, or that supplies an out-of-range next index on a small host copy in the vDPA relay path, can cause the host vhost process to walk past the validated mapping or heap copy. That can crash or disrupt the vhost process. Out-of-bounds bytes are consumed as descriptor fields for GPA translation and are not returned to the guest as payload. This is a residual issue in the non-contiguous indirect descriptor copy path introduced as part of the CVE-2018-1059 fix. |
| A denial of service flaw was found in Poppler's Splash backend. A crafted PDF with tiling-pattern geometry approaching the int32 boundary can cause SplashOutputDev::tilingPatternFill to compute an attacker-controlled repeat count that drives an excessively long loop in the pattern-fill scanline routine, without a corresponding memory allocation. An attacker could exploit this by supplying a malicious PDF to an application that renders it via Poppler's Splash backend, causing the rendering process to consume 100% CPU for an attacker-controlled, extended duration. |
| A flaw was found in libstoragemgmt. An attacker with control over a local or virtual storage device could provide specially crafted SCSI (Small Computer System Interface) Vital Product Data (VPD) page 0x80 data. This malformed data, specifically an untrusted page length field, can lead to a stack buffer overflow in the `_sg_parse_vpd_80()` function during serial number parsing. Successful exploitation could result in a denial of service by crashing or destabilizing the process querying the serial number. |
| A flaw was found in dnsmasq. After a reduction of internal domain-name buffer sizes, the DNSSEC validator can write a few bytes past a name buffer when converting names to and from DNS wire format. An attacker who can cause the server to validate a crafted DNSSEC response may overwrite a small amount of adjacent heap metadata. DNSSEC support is not compiled in by default and must also be enabled at runtime. |
| A flaw was found in dnsmasq. The TCP DNS service uses a small fixed pool of child processes and does not set a receive timeout on client connections. A remote attacker can open idle TCP connections to port 53 and occupy the entire pool, preventing new TCP DNS connections and DNSSEC validation that requires TCP fallback. UDP DNS resolution continues, and occupied slots are released after a fixed lifetime. |
| A flaw was found in dnsmasq. The TFTP server can serve the wrong file contents because a recently used transfer cache is not invalidated when a transfer finishes. An attacker on the local network who can request a TFTP file may cause a later client to receive previously cached data instead of the requested file. In PXE network-boot environments this can substitute attacker-chosen boot content for a victim machine. |
| A flaw was found in SSSD. When configured to evaluate password expiration warnings before restrictive access rules in LDAP (Lightweight Directory Access Protocol) environments, an expired-password warning terminates rule evaluation early and treats the access request as successful. A remote authenticated user with an expired password using an alternative authentication method, such as SSH public key authentication, can exploit this flaw to bypass access control restrictions and gain unauthorized access to protected systems. |
| An out-of-bounds write flaw was found in usbredir. Starting an isochronous OUT stream with a transfer count of 1 leaves the stream's single transfer buffer permanently unsubmitted, defeating the bounds check in usbredirhost_iso_packet() and allowing a usbredir peer to write past the end of the packet descriptor array on every subsequent isochronous packet. |
