| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| D-Link DIR-600L Hardware Revision A1 (End-of-Life) contains a hardcoded telnet backdoor. The device starts a telnet daemon at boot via /bin/telnetd.sh with the username "Alphanetworks" and the static password "wrgn35_dlwbr_dir600l" read from /etc/alpha_config/image_sign. The custom telnetd binary accepts a -u user:password flag, and the custom login binary uses strcmp() to validate credentials. Successful authentication grants an unauthenticated attacker on the local network a root shell with full administrative control. The device has reached End-of-Life (EOL) and will not receive patches. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: icmp: fix null-ptr-deref in icmp_build_probe()
ipv6_stub->ipv6_dev_find() may return ERR_PTR(-EAFNOSUPPORT) when the
IPv6 stack is not active (CONFIG_IPV6=m and not loaded), and passing
this error pointer to dev_hold() will cause a kernel crash with
null-ptr-deref.
Instead, silently discard the request. RFC 8335 does not appear to
define a specific response for the case where an IPv6 interface
identifier is syntactically valid but the implementation cannot perform
the lookup at runtime, and silently dropping the request may safer than
misreporting "No Such Interface". |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: ioam: fix potential NULL dereferences in __ioam6_fill_trace_data()
We need to check __in6_dev_get() for possible NULL value, as
suggested by Yiming Qian.
Also add skb_dst_dev_rcu() instead of skb_dst_dev(),
and two missing READ_ONCE().
Note that @dev can't be NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
l2tp: Drop large packets with UDP encap
syzbot reported a WARN on my patch series [1]. The actual issue is an
overflow of 16-bit UDP length field, and it exists in the upstream code.
My series added a debug WARN with an overflow check that exposed the
issue, that's why syzbot tripped on my patches, rather than on upstream
code.
syzbot's repro:
r0 = socket$pppl2tp(0x18, 0x1, 0x1)
r1 = socket$inet6_udp(0xa, 0x2, 0x0)
connect$inet6(r1, &(0x7f00000000c0)={0xa, 0x0, 0x0, @loopback, 0xfffffffc}, 0x1c)
connect$pppl2tp(r0, &(0x7f0000000240)=@pppol2tpin6={0x18, 0x1, {0x0, r1, 0x4, 0x0, 0x0, 0x0, {0xa, 0x4e22, 0xffff, @ipv4={'\x00', '\xff\xff', @empty}}}}, 0x32)
writev(r0, &(0x7f0000000080)=[{&(0x7f0000000000)="ee", 0x34000}], 0x1)
It basically sends an oversized (0x34000 bytes) PPPoL2TP packet with UDP
encapsulation, and l2tp_xmit_core doesn't check for overflows when it
assigns the UDP length field. The value gets trimmed to 16 bites.
Add an overflow check that drops oversized packets and avoids sending
packets with trimmed UDP length to the wire.
syzbot's stack trace (with my patch applied):
len >= 65536u
WARNING: ./include/linux/udp.h:38 at udp_set_len_short include/linux/udp.h:38 [inline], CPU#1: syz.0.17/5957
WARNING: ./include/linux/udp.h:38 at l2tp_xmit_core net/l2tp/l2tp_core.c:1293 [inline], CPU#1: syz.0.17/5957
WARNING: ./include/linux/udp.h:38 at l2tp_xmit_skb+0x1204/0x18d0 net/l2tp/l2tp_core.c:1327, CPU#1: syz.0.17/5957
Modules linked in:
CPU: 1 UID: 0 PID: 5957 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
RIP: 0010:udp_set_len_short include/linux/udp.h:38 [inline]
RIP: 0010:l2tp_xmit_core net/l2tp/l2tp_core.c:1293 [inline]
RIP: 0010:l2tp_xmit_skb+0x1204/0x18d0 net/l2tp/l2tp_core.c:1327
Code: 0f 0b 90 e9 21 f9 ff ff e8 e9 05 ec f6 90 0f 0b 90 e9 8d f9 ff ff e8 db 05 ec f6 90 0f 0b 90 e9 cc f9 ff ff e8 cd 05 ec f6 90 <0f> 0b 90 e9 de fa ff ff 44 89 f1 80 e1 07 80 c1 03 38 c1 0f 8c 4f
RSP: 0018:ffffc90003d67878 EFLAGS: 00010293
RAX: ffffffff8ad985e3 RBX: ffff8881a6400090 RCX: ffff8881697f0000
RDX: 0000000000000000 RSI: 0000000000034010 RDI: 000000000000ffff
RBP: dffffc0000000000 R08: 0000000000000003 R09: 0000000000000004
R10: dffffc0000000000 R11: fffff520007acf00 R12: ffff8881baf20900
R13: 0000000000034010 R14: ffff8881a640008e R15: ffff8881760f7000
FS: 000055557e81f500(0000) GS:ffff8882a9467000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000200000033000 CR3: 00000001612f4000 CR4: 00000000000006f0
Call Trace:
<TASK>
pppol2tp_sendmsg+0x40a/0x5f0 net/l2tp/l2tp_ppp.c:302
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
sock_write_iter+0x503/0x550 net/socket.c:1195
do_iter_readv_writev+0x619/0x8c0 fs/read_write.c:-1
vfs_writev+0x33c/0x990 fs/read_write.c:1059
do_writev+0x154/0x2e0 fs/read_write.c:1105
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x14d/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f636479c629
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffffd4241c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000014
RAX: ffffffffffffffda RBX: 00007f6364a15fa0 RCX: 00007f636479c629
RDX: 0000000000000001 RSI: 0000200000000080 RDI: 0000000000000003
RBP: 00007f6364832b39 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f6364a15fac R14: 00007f6364a15fa0 R15: 00007f6364a15fa0
</TASK>
[1]: https://lore.kernel.org/all/20260226201600.222044-1-alice.kernel@fastmail.im/ |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipa: fix GENERIC_CMD register field masks for IPA v5.0+
Fix the field masks to match the hardware layout documented in
downstream GSI (GSI_V3_0_EE_n_GSI_EE_GENERIC_CMD_*).
Notably this fixes a WARN I was seeing when I tried to send "stop"
to the MPSS remoteproc while IPA was up. |
| In the Linux kernel, the following vulnerability has been resolved:
ixgbevf: add missing negotiate_features op to Hyper-V ops table
Commit a7075f501bd3 ("ixgbevf: fix mailbox API compatibility by
negotiating supported features") added the .negotiate_features callback
to ixgbe_mac_operations and populated it in ixgbevf_mac_ops, but forgot
to add it to ixgbevf_hv_mac_ops. This leaves the function pointer NULL
on Hyper-V VMs.
During probe, ixgbevf_negotiate_api() calls ixgbevf_set_features(),
which unconditionally dereferences hw->mac.ops.negotiate_features().
On Hyper-V this results in a NULL pointer dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine [...]
Workqueue: events work_for_cpu_fn
RIP: 0010:0x0
[...]
Call Trace:
ixgbevf_negotiate_api+0x66/0x160 [ixgbevf]
ixgbevf_sw_init+0xe4/0x1f0 [ixgbevf]
ixgbevf_probe+0x20f/0x4a0 [ixgbevf]
local_pci_probe+0x50/0xa0
work_for_cpu_fn+0x1a/0x30
[...]
Add ixgbevf_hv_negotiate_features_vf() that returns -EOPNOTSUPP and
wire it into ixgbevf_hv_mac_ops. The caller already handles -EOPNOTSUPP
gracefully. |
| In the Linux kernel, the following vulnerability has been resolved:
eventpoll: defer struct eventpoll free to RCU grace period
In certain situations, ep_free() in eventpoll.c will kfree the epi->ep
eventpoll struct while it still being used by another concurrent thread.
Defer the kfree() to an RCU callback to prevent UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: s3fwrn5: allocate rx skb before consuming bytes
s3fwrn82_uart_read() reports the number of accepted bytes to the serdev
core. The current code consumes bytes into recv_skb and may already
deliver a complete frame before allocating a fresh receive buffer.
If that alloc_skb() fails, the callback returns 0 even though it has
already consumed bytes, and it leaves recv_skb as NULL for the next
receive callback. That breaks the receive_buf() accounting contract and
can also lead to a NULL dereference on the next skb_put_u8().
Allocate the receive skb lazily before consuming the next byte instead.
If allocation fails, return the number of bytes already accepted. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Fix memory leak in airoha_qdma_rx_process()
If an error occurs on the subsequents buffers belonging to the
non-linear part of the skb (e.g. due to an error in the payload length
reported by the NIC or if we consumed all the available fragments for
the skb), the page_pool fragment will not be linked to the skb so it will
not return to the pool in the airoha_qdma_rx_process() error path. Fix the
memory leak partially reverting commit 'd6d2b0e1538d ("net: airoha: Fix
page recycling in airoha_qdma_rx_process()")' and always running
page_pool_put_full_page routine in the airoha_qdma_rx_process() error
path. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: pd-mapper: Fix element length in servreg_loc_pfr_req_ei
It looks element length declared in servreg_loc_pfr_req_ei for reason
not matching servreg_loc_pfr_req's reason field due which we could
observe decoding error on PD crash.
qmi_decode_string_elem: String len 81 >= Max Len 65
Fix this by matching with servreg_loc_pfr_req's reason field. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - Fix page reassignment overflow in af_alg_pull_tsgl
When page reassignment was added to af_alg_pull_tsgl the original
loop wasn't updated so it may try to reassign one more page than
necessary.
Add the check to the reassignment so that this does not happen.
Also update the comment which still refers to the obsolete offset
argument. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: mcp23s08: Disable all pin interrupts during probe
A chip being probed may have the interrupt-on-change feature enabled on
some of its pins, for example after a reboot. This can cause the chip to
generate interrupts for pins that don't have a registered nested handler,
which leads to a kernel crash such as below:
[ 7.928897] Unable to handle kernel read from unreadable memory at virtual address 00000000000000ac
[ 7.932314] Mem abort info:
[ 7.935081] ESR = 0x0000000096000004
[ 7.938808] EC = 0x25: DABT (current EL), IL = 32 bits
[ 7.944094] SET = 0, FnV = 0
[ 7.947127] EA = 0, S1PTW = 0
[ 7.950247] FSC = 0x04: level 0 translation fault
[ 7.955101] Data abort info:
[ 7.957961] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 7.963421] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 7.968447] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 7.973734] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000089b7000
[ 7.980148] [00000000000000ac] pgd=0000000000000000, p4d=0000000000000000
[ 7.986913] Internal error: Oops: 0000000096000004 [#1] SMP
[ 7.992545] Modules linked in:
[ 8.073678] CPU: 0 UID: 0 PID: 81 Comm: irq/18-4-0025 Not tainted 7.0.0-rc6-gd2b5a1f931c8-dirty #199
[ 8.073689] Hardware name: Khadas VIM3 (DT)
[ 8.073692] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 8.094639] pc : _raw_spin_lock_irq+0x40/0x80
[ 8.098970] lr : handle_nested_irq+0x2c/0x168
[ 8.098979] sp : ffff800082b2bd20
[ 8.106599] x29: ffff800082b2bd20 x28: ffff800080107920 x27: ffff800080104d88
[ 8.106611] x26: ffff000003298080 x25: 0000000000000001 x24: 000000000000ff00
[ 8.113707] x23: 0000000000000001 x22: 0000000000000000 x21: 000000000000000e
[ 8.120850] x20: 0000000000000000 x19: 00000000000000ac x18: 0000000000000000
[ 8.135046] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 8.135062] x14: ffff800081567ea8 x13: ffffffffffffffff x12: 0000000000000000
[ 8.135070] x11: 00000000000000c0 x10: 0000000000000b60 x9 : ffff800080109e0c
[ 8.135078] x8 : 1fffe0000069dbc1 x7 : 0000000000000001 x6 : ffff0000034ede00
[ 8.135086] x5 : 0000000000000000 x4 : ffff0000034ede08 x3 : 0000000000000001
[ 8.163460] x2 : 0000000000000000 x1 : 0000000000000001 x0 : 00000000000000ac
[ 8.170560] Call trace:
[ 8.180094] _raw_spin_lock_irq+0x40/0x80 (P)
[ 8.184443] mcp23s08_irq+0x248/0x358
[ 8.184462] irq_thread_fn+0x34/0xb8
[ 8.184470] irq_thread+0x1a4/0x310
[ 8.195093] kthread+0x13c/0x150
[ 8.198309] ret_from_fork+0x10/0x20
[ 8.201850] Code: d65f03c0 d2800002 52800023 f9800011 (885ffc01)
[ 8.207931] ---[ end trace 0000000000000000 ]---
This issue has always been present, but has been latent until commit
"f9f4fda15e72" ("pinctrl: mcp23s08: init reg_defaults from HW at probe and
switch cache type"), which correctly removed reg_defaults from the regmap
and as a side effect changed the behavior of the interrupt handler so that
the real value of the MCP_GPINTEN register is now being read from the chip
instead of using a bogus 0 default value; a non-zero value for this
register can trigger the invocation of a nested handler which may not exist
(yet).
Fix this issue by disabling all pin interrupts during initialization. |
| An issue in Lymphatus caesium-image-compressor All versions up to and including commit 02da2c6 allows a local attacker to execute arbitrary code via the shutdownMachine and putMachineToSleep functions in PostCompressionActions.cpp |
| In plain terms, Apache Polaris is supposed to issue short-lived GCS credentials
that
only work for one table's files, but a crafted namespace or table name can
cause those credentials to work across the configured bucket instead.
Apache Polaris builds Google Cloud Storage downscoped credentials by creating a
Credential Access Boundary (CAB) with CEL conditions that are intended to
restrict access to the requested table's storage path.
The relevant CEL string is built from the bucket name and the table path.
That
table path is derived from namespace and table identifiers. In current code,
that path appears to be inserted into the CEL expression without escaping.
As a result, a namespace or table identifier containing a single quote and
other URI-safe CEL fragments can break out of the intended quoted string and
change the meaning of the CEL condition.
In private testing against Polaris 1.4.0 on real Google Cloud Storage, it was confirmed that Polaris accepted a crafted identifier and returned delegated
GCS
credentials whose CEL path restriction had effectively collapsed.
Those delegated credentials could then:
- list another table's object prefix;
- read another table's metadata control file (Iceberg metadata JSON);
- create and delete an object under another table's object prefix;
- and also list, read, create, and delete objects under an unrelated
external
prefix in the same bucket that was not part of any table path.
That last point is important. The issue is not limited to "another table".
In
the confirmed setup, once Apache Polaris returned credentials for the crafted
table,
the path restriction inside the configured bucket was effectively gone.
The practical effect is that temporary credentials for one crafted table
can be
broader than the table Polaris was asked to authorize, and can become
effectively bucket-wide within the configured bucket.
The current GCS testing used a Polaris principal with broad catalog
privileges for setup. A separate least-privilege Polaris RBAC variant
has not yet been tested on GCS. However, the storage-credential
broadening behavior itself has been confirmed on GCS. |
| Conditional Fields for Contact Form 7 WordPress plugin through version 2.6.7 contains an uncontrolled resource consumption vulnerability in the Wpcf7cfMailParser class where the hide_hidden_mail_fields_regex_callback() method reads an iteration count directly from user-supplied POST parameters without validation or upper bound enforcement. Unauthenticated attackers can supply an arbitrarily large integer value through the REST API endpoint to cause unbounded loop execution with multiple preg_replace() operations, exhausting server memory and crashing the PHP process. |
| WDR201A WiFi Extender (HW V2.1, FW LFMZX28040922V1.02) contains an OS command injection vulnerability in the wireless.cgi binary that allow unauthenticated remote attackers to execute arbitrary shell commands by injecting malicious input into the sz11gChannel or PIN POST parameters. Attackers can exploit unsanitized parameter handling in the set_wifi_basic and set_wifi_do_wps functions to achieve remote code execution without authentication. |
| WDR201A WiFi Extender (HW V2.1, FW LFMZX28040922V1.02) contains an OS command injection vulnerability in the internet.cgi binary that allows unauthenticated remote attackers to execute arbitrary shell commands by injecting malicious input into the gateway POST parameter. Attackers can exploit unsanitized parameter concatenation in the set_add_routing function to inject shell commands that are executed via popen() with partial output reflected in the HTTP response. |
| WDR201A WiFi Extender (HW V2.1, FW LFMZX28040922V1.02) contains an OS command injection vulnerability in the makeRequest.cgi binary that allows unauthenticated remote attackers to execute arbitrary shell commands by injecting malicious input into the set_time or StartSniffer functions. Attackers can craft a POST request with specially crafted ampersand-delimited parameters to bypass input sanitization and execute commands with a maximum length of 31 bytes through the date command or channel parameter processing. |
| @fastify/accepts-serializer cached serializer-selection results keyed by the request Accept header without a size limit or eviction policy. A remote unauthenticated client could send many distinct but matching Accept header variants to make the cache grow unbounded, eventually exhausting the Node.js heap and crashing the process. Versions <= 6.0.3 are affected. Update to 6.0.4 or later, which bounds the cache via an LRU with a default size of 100 entries, configurable through the new cacheSize plugin option. |
| WDR201A WiFi Extender (HW V2.1, FW LFMZX28040922V1.02) contains an OS command injection vulnerability in the adm.cgi binary's reboot_time function that allows unauthenticated remote attackers to execute arbitrary shell commands by injecting malicious input into the reboot_time POST parameter. Attackers can send a crafted request with shell metacharacters in the reboot_time parameter when reboot_enabled=1 to achieve remote code execution. |
