Export limit exceeded: 20793 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (7954 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89862 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix BSG job leak on validate flash image error path qla28xx_validate_flash_image() returns QLA_SUCCESS (0) unconditionally, telling the FC BSG transport (fc_bsg_host_dispatch()) that the driver owns and will complete the request. But bsg_job_done() is guarded by "if (!rval)", so on the error path (rval == -EINVAL) neither the driver nor the transport completes the job. The request dangles until it times out, leaking block layer resources. Commit c2c68225b145 ("scsi: qla2xxx: Fix bsg_done() causing double free") added the "if (!rval)" guard to a batch of BSG handlers. That is correct for handlers that also return the error code (the transport then completes the job once via fail_host_msg), but this function returns QLA_SUCCESS unconditionally, so the guard turned a correct single completion into a leak. Always call bsg_job_done(): bsg_reply->result is DID_OK and the error is reported in vendor_rsp[0], and since the function returns 0 the transport will not complete the job a second time. | ||||
| CVE-2026-89886 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: intel/ipu6: fix async notifier cleanup leak on parse error isys_notifier_init() calls v4l2_async_nf_init() and then adds fwnode remote subdevs in a loop with v4l2_async_nf_add_fwnode_remote(). If an endpoint parse or add fails partway through the loop, it jumps to err_parse and returns without calling v4l2_async_nf_cleanup(), leaking every v4l2_async_connection already added to the notifier's waiting list. The register-failure path just below already cleans up correctly, and the caller only tears the notifier down (isys_notifier_cleanup()) once isys_notifier_init() has returned success. Clean up the notifier on the parse error path too. | ||||
| CVE-2026-89936 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: dac: m62332: Fix regulator reference count imbalance m62332_set_value() enables the Vcc regulator on every write of a non-zero value and disables it on every write of zero, without tracking the channel's current state. Because the regulator is reference counted, changing a channel directly from one non-zero value to another enables it more than once, while a later write of zero disables it only once. The reference count never returns to zero and the regulator is left enabled indefinitely. Only enable the regulator on the transition from zero to non-zero, and only disable it on the transition from non-zero to zero, using the previously stored channel value to detect the edge. Balance the regulator on the I2C error path so the reference count stays consistent if the write fails. | ||||
| CVE-2026-89883 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: rc: sunxi-cir: Unregister rc device on probe failure After rc_register_device() succeeds, later probe failures must undo the registration with rc_unregister_device(). The current error path jumps to the allocation cleanup label and only calls rc_free_device(), leaving the rc device registration and resources created by rc_register_device() behind. Add a registered-device unwind label for the IRQ lookup, IRQ request, and hardware initialization failure paths. Keep rc_free_device() for failures before rc_register_device() succeeds. | ||||
| CVE-2026-89944 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: hdac_hda: Fix hlink refcount leak on component registration failure hdac_hda_dev_probe() gets the HDA link with snd_hdac_ext_bus_link_get() before registering the ASoC component. If component registration fails, the function returns without dropping the link reference. Always call snd_hdac_ext_bus_link_put() after the registration attempt so the reference taken during probe is balanced on both success and failure. | ||||
| CVE-2026-89982 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i2c: mux: Fix channel node leak on adapter add failure i2c_mux_add_adapter() takes a reference to the Device Tree channel node before registering the new adapter. If adapter registration fails, the error path frees the private data without dropping that reference. Release the channel node before freeing the private data. | ||||
| CVE-2026-90015 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xhci: fix lost bounce buffers on TDs spanning several ring segments When a TD reaches a link TRB with data that is not aligned to the endpoint's wMaxPacketSize, xhci_align_td() stages the unalignable tail through the bounce buffer of the ring segment holding that link TRB. xhci_unmap_td_bounce_buffer() later unmaps it and, for IN transfers, copies the data back into the URB's buffer. The enqueue path records the segment that was bounced in td->bounce_seg, under the assumption that a TD never spans more than two ring segments. That assumption does not hold: a TD large enough to span three or more segments crosses several link TRBs and can be bounced at each of them. Only the last one survives in td->bounce_seg, so every earlier bounce buffer is neither copied back nor DMA unmapped. The URB still completes with actual_length equal to the requested length and no error, so the transfer looks successful while a wMaxPacketSize sized hole in the destination buffer silently keeps its previous contents. It also leaks a DMA mapping per dropped bounce. Any sufficiently large and fragmented bulk transfer can hit this. It was found with a USB mass storage device behind xHCI backing a dm-verity target with 512 byte hash blocks, where the stale data is detected rather than silently consumed. The device enumerates as SuperSpeed, so wMaxPacketSize is 1024, while dm-bufio issues one 512 byte bio per hash block. verity_prefetch_io() makes the block layer merge hundreds of them into a single request of up to 512 scatterlist entries of 512 bytes each. At 256 TRBs per ring segment such a TD spans three segments, and every segment boundary falls on an odd multiple of 512, i.e. unaligned to wMaxPacketSize. dm-bufio then caches a hash block holding stale data and dm-verity declares the metadata block corrupted: device-mapper: verity: 8:2: metadata block 10850 is corrupted A reproducer running this under qemu is available at https://github.com/baloo/xhci-verity The bounce state (bounce_buf, bounce_dma, bounce_len, bounce_offs) already lives on the ring segment, so there is nothing extra to track. Keep recording the last bounced segment in td->bounce_seg and, on completion, walk the segments from td->start_seg up to it, unmapping every segment that still has a pending bounce. Stopping at td->bounce_seg rather than td->end_seg matters: a bounce implies the TD continues past that segment's link TRB, so bounce_seg is always strictly before end_seg, and a later TD may already have started in end_seg and been bounced there. Walking that far would copy a foreign bounce buffer into this URB and unmap it twice. It also keeps the walk correct if a TD ever wraps the whole ring so that end_seg == start_seg. [mn: Add ring->num_segs check to prevent unlikely infinite for loop.] | ||||
| CVE-2026-90028 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: hd3ss3220: track VBUS enable state per consumer regulator_is_enabled() reports the aggregate regulator state, not whether this consumer holds an enable reference. If another consumer enables VBUS first, the driver can skip its own regulator_enable() call and later attempt to drop a reference it never acquired, triggering an unbalanced regulator disable warning. Track successful enable and disable calls locally. Keep the state unchanged when an operation fails so a later role or ID notification retries the operation while this consumer keeps balanced references. | ||||
| CVE-2026-89896 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: cedrus: fix memory leak in cedrus_init_ctrls() In cedrus_init_ctrls(), the V4L2 control handler is initialized before allocating memory for ctx->ctrls. If this allocation fails, the function returns -ENOMEM without freeing the previously allocated handler resources, leading to a memory leak. Fix this by calling v4l2_ctrl_handler_free() on the ctx->ctrls allocation failure path. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1.1. An x86_64 allyesconfig build showed no new warnings. As we do not have an Allwinner SoC or board with a Cedrus VPU available to test with, no runtime testing was able to be performed. | ||||
| CVE-2026-89934 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: light: ltrf216a: fix runtime PM reference leak in error path ltrf216a_get_lux() acquires a runtime PM reference by calling ltrf216a_set_power_state(data, true). However, if ltrf216a_read_data() fails, the function returns immediately without dropping the reference. This leaves the runtime PM usage count unbalanced, preventing the device from autosuspending after a failed read. Fix this by releasing the runtime PM reference before returning from the error path. | ||||
| CVE-2026-89953 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: mtdoops: free page bitmap when the backing MTD is removed mtdoops_notify_add() allocates oops_page_used when the configured MTD device is registered. mtdoops_notify_remove() detaches from that device but leaves the bitmap allocated. If the same MTD device is later registered again, the add path allocates a new bitmap and overwrites the old pointer, leaking one vmalloc allocation per remove/add cycle. This is only visible when the backing MTD device can disappear and be registered again while mtdoops remains loaded, so the usual static MTD case does not expose it. Free the bitmap after unregistering the dumper and flushing the pending workers, then clear the pointer and page count before a later attach can allocate fresh state. Clearing the pointer also keeps the module exit path from freeing the same bitmap a second time after a remove event. | ||||
| CVE-2026-63128 | 1 Modelcontextprotocol | 1 Rust-sdk | 2026-09-18 | 7.5 High |
| RMCP is an official Rust SDK for the Model Context Protocol. Prior to 2.0.0, the rmcp crate's stateful Streamable HTTP server in crates/rmcp/src/transport/streamable_http_server/tower.rs allows an unauthenticated client to send a well-formed JSON-RPC POST that is not an initialization request, or an initialization request with a mismatched protocol header, causing StreamableHttpService::handle_post to call LocalSessionManager.create_session before validating the message. An early validation failure returns without removing the inserted LocalSessionHandle from LocalSessionManager.sessions, permanently retaining session and channel state for the server process lifetime. Repeated requests can grow the shared session table without bound, degrade legitimate-client latency through lock contention, exhaust memory, and terminate the server. This issue is fixed in version 2.0.0. | ||||
| CVE-2026-69147 | 1 Vllm-project | 1 Vllm | 2026-09-18 | 6.5 Medium |
| vLLM is an inference and serving engine for large language models. Prior to 0.28.0, request bodies for Chat Completions and Responses can set media_io_kwargs.video.video_backend to pynvvideocodec, and MediaConnector.fetch_video forwards that choice to VideoMediaIO even when startup configuration selected a software decoder. The engine's _reserve_mm_ipc_gpu_memory logic budgets decoder memory only from static configuration, so the request-selected VIDEO_LOADER_REGISTRY backend can create a CUDA context, decoder surfaces, and decoded-frame allocations that were not removed from the engine's KV-cache budget. An attacker able to submit video requests to a video-capable GPU deployment with PyNvVideoCodec installed can exhaust shared GPU memory, causing request failures, worker crashes, or denial of service. The first release containing the fix is version 0.28.0. | ||||
| CVE-2026-70469 | 1 Apache | 1 Nifi | 2026-09-18 | 7.5 High |
| Apache NiFi 2.11.0 disabled support for gzip-encoded HTTP requests for the application REST API and rejected requests that included the standard Content-Encoding header indicating gzip encoding. The framework enforcement filter did not check multiple instances of the Content-Encoding header and did not reject non-standard identifiers for gzip encoding, allowing a malicious client to send crafted requests that could consume excessive amounts of memory. Upgrading to Apache NiFi 2.12.0 is the recommended mitigation, which disables decompression of gzip-encoded HTTP requests regardless of header number or encoding identifiers. | ||||
| CVE-2026-89924 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix old_data leak in guest debug error path __import_wp_info() allocates a per-watchpoint old_data buffer to back up the original guest memory contents. If a later watchpoint of the same KVM_SET_GUEST_DEBUG request fails to import, kvm_s390_import_bp_data() jumps to the error label, which frees the wp_info array but not the old_data buffers of the entries that were imported successfully. Up to MAX_BP_COUNT - 1 buffers of up to MAX_WP_SIZE bytes are leaked per failed request, and the request can be repeated. Create error handling for cleaning up all created old_data memory areas. | ||||
| CVE-2026-89925 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix memory leak in guest debug handling bp_data is freed only for the error case by kfree(bp_data). Every successful KVM_SET_GUEST_DEBUG will leak bp_data. | ||||
| CVE-2026-89868 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Add timeout while stop_streaming When stop_streaming is called, an infinite loop may occur in some cases. Add a bounded poll of the queue status: loop until the queues drain, sleeping briefly between polls, and bail out once VPU_DEC_STOP_TIMEOUT elapses. | ||||
| CVE-2026-89880 | 1 Linux | 2 Kernel, Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: release URBs and stream buffers on start_streaming() failure rtl2832_sdr_start_streaming() calls rtl2832_sdr_alloc_stream_bufs(), rtl2832_sdr_alloc_urbs() and rtl2832_sdr_submit_urbs() in sequence and shares a single err: label that only unlocks the mutex and returns. When alloc_urbs() succeeds but submit_urbs() fails, or when alloc_urbs() itself returns -ENOMEM after alloc_stream_bufs() has already succeeded, the URBs and/or the coherent DMA stream buffers stay allocated while streaming reports failure to vb2. Two latent defects follow on the next VIDIOC_STREAMON: 1) rtl2832_sdr_alloc_stream_bufs() unconditionally resets dev->buf_num to 0 and overwrites dev->buf_list[]/dev->dma_addr[], permanently leaking the coherent DMA memory allocated by the previous attempt. 2) rtl2832_sdr_alloc_urbs() never resets dev->urbs_initialized and only increments it. After a second successful pass urbs_initialized can exceed MAX_BULK_BUFS, so the subsequent rtl2832_sdr_free_urbs() walks from urbs_initialized - 1 down to 0 and reads past the end of dev->urb_list[], passing garbage pointers to usb_free_urb(). Mirror the teardown that stop_streaming() already performs: on the error path call rtl2832_sdr_free_urbs() and rtl2832_sdr_free_stream_bufs() before unlocking. Both helpers are idempotent (free_urbs kills and zeros urbs_initialized; free_stream_bufs is gated on URB_BUF and clears the buf_num counter), so partial-failure paths and the no-allocation paths remain safe. Issue identified by automated review of the INV-003 series at https://sashiko.dev/ | ||||
| CVE-2026-73175 | 1 Advantech | 2 Eki-1242eims, Eki-1242ieims | 2026-09-18 | N/A |
| Nozomi Networks Labs identified a CWE-400: Uncontrolled Resource Consumption vulnerability in the OPC UA gateway component of Advantech EKI-1242EIMS in firmware version V1.06.01 that allows an adjacent unauthenticated attacker to exhaust the server session pool and cause a complete denial of service to all legitimate OPC UA clients by opening multiple anonymous sessions. | ||||
| CVE-2026-76646 | 1 Apache | 1 Myfaces | 2026-09-18 | 7.5 High |
| A remote attacker could cause excessive resource consumption by supplying specially crafted request parameters, potentially resulting in a denial of service condition. Older unsupported versions may also be affected. Users are recommended to upgrade to versions 2.3.12, 2.3-next-M9, 3.0.4, 4.0.4, or 4.1.4, which fix this issue. | ||||