| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: pci-epf: reject too-short SGL segments
The host controls an SGL segment's length. A nonzero length smaller than
one SGL descriptor makes nr_descs zero, so
nvmet_pci_epf_get_sgl_segment() reads the type byte of sgls[-1] outside
the allocated buffer. If that byte contains a segment descriptor type,
the function also copies the preceding 16 bytes and returns a negative
descriptor count.
The read was reproduced in 3/3 KASAN boots with only the host transfer
mocked by a KUnit test:
BUG: KASAN: slab-out-of-bounds in nvmet_pci_epf_get_sgl_segment
Read of size 1 by task kunit_try_catch
Call Trace:
nvmet_pci_epf_get_sgl_segment
nvmet_pci_epf_short_sgl_test
Kernel panic - not syncing: KASAN: panic_on_warn set ...
Reject segments that cannot hold one descriptor before allocating or
transferring their contents. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-auth: fix out-of-bounds write in nvmet_auth_challenge()
nvmet_auth_challenge() receives its output buffer as a void pointer.
sizeof(*d) therefore evaluates to one with GCC and undercounts the fixed
challenge header by 15 bytes. A short AUTH_RECEIVE buffer can pass the
check before the challenge is copied past the end of its allocation.
Use the typed challenge pointer when calculating the response size.
BUG: KASAN: slab-out-of-bounds in nvmet_execute_auth_receive (drivers/nvme/target/fabrics-cmd-auth.c:442 drivers/nvme/target/fabrics-cmd-auth.c:569)
Write of size 32 by task kworker/1:1H/64
Workqueue: nvmet_tcp_wq nvmet_tcp_io_work
Call Trace:
nvmet_execute_auth_receive (drivers/nvme/target/fabrics-cmd-auth.c:442 drivers/nvme/target/fabrics-cmd-auth.c:569)
nvmet_tcp_try_recv_pdu (drivers/nvme/target/tcp.c:1119 drivers/nvme/target/tcp.c:1243)
nvmet_tcp_io_work (drivers/nvme/target/tcp.c:1350 drivers/nvme/target/tcp.c:1382 drivers/nvme/target/tcp.c:1445)
process_one_work (kernel/workqueue.c:3322)
worker_thread (kernel/workqueue.c:3405 kernel/workqueue.c:3486)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
The buggy address is located 16 bytes inside of
allocated 33-byte region [ffff888000554e80, ffff888000554ea1)
Kernel panic - not syncing: KASAN: panic_on_warn set ... |
| Out-of-bounds read in DNS Server allows an authorized attacker to disclose information over a network. |
| Out-of-bounds read in DNS Server allows an authorized attacker to disclose information over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, arm64: set up the frame pointer for the exception callback
A program acting as exception boundary saves all callee-saved registers,
so build_prologue() takes the exception_cb path and never calls
push_callee_regs(). That is the only place find_used_callee_regs() runs,
and with it the only place ctx->fp_used is set, so the callback prologue
does not emit the
mov x25, sp
that points BPF_REG_FP at the frame the callback runs on. x25 keeps
whatever it held when bpf_throw() was called. If the throw came from a
subprogram that uses its own BPF stack, that is the subprogram's frame
pointer, and since the subprogram never returns it never restores x25
either.
Stack accesses through BPF_REG_FP are rewritten to be stack pointer
relative, so those still land in the callback's own frame. Materializing
the register does not: a callback that passes the address of a local
variable to a helper hands over an address in the dead subprogram's
frame. That address is below the callback's stack pointer by then, and
the helper's own call chain covers it, so the helper can write over its
own return address. 0x1234 below is the value the helper was asked to
store:
pc : 0x1234
lr : 0x1234
Call trace:
0x1234 (P)
bpf_test_run+0x188/0x3e0
bpf_prog_test_run_skb+0x47c/0x998
__sys_bpf+0xbdc/0xdd8
Kernel panic - not syncing: Oops: Fatal exception in interrupt
Set ctx->fp_used on the exception callback path so that the existing code
further down sets x25 from the stack pointer. The epilogue restores it
from the main program's save area along with the other callee-saved
registers, as it already does. x86 sets the frame pointer for the
callback from the argument it is passed, and powerpc computes it from
the stack pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix UAF due to concurrent consumption of ttrace lists in alloc_bulk
Syzkaller repeatedly triggered UAF splats related to nodes in
waiting_for_gp_ttrace within the bpf memalloc:
BUG: KASAN: slab-use-after-free in llist_del_first+0x85/0x110 lib/llist.c:61
Read of size 8 at addr ffff8881572cd080 by task syz.4.470/5112
...
llist_del_first+0x85/0x110 lib/llist.c:61
alloc_bulk+0x193/0x460 kernel/bpf/memalloc.c:229
bpf_mem_refill+0x386/0x560 kernel/bpf/memalloc.c:436
Freed by task 14:
...
__free_rcu kernel/bpf/memalloc.c:281 [inline]
__free_rcu_tasks_trace+0x48/0xd0 kernel/bpf/memalloc.c:291
rcu_tasks_invoke_cbs+0x1ec/0x3e0 kernel/rcu/tasks.h:571
rcu_tasks_one_gp+0x13d/0x220 kernel/rcu/tasks.h:621
rcu_tasks_kthread+0xf3/0x120 kernel/rcu/tasks.h:651
The reason is that the UAF occurs after the RCU Tasks Trace GP expires:
when the __free_rcu() callback runs, there is no synchronization
protecting llist_del_all() against concurrent alloc_bulk() operating on
waiting_for_gp_ttrace, leading to the race condition below:
CPU0 CPU1
__free_rcu (RCU Tasks Trace callback)
alloc_bulk
llist_del_first(&c->waiting_for_gp_ttrace)
entry = smp_load_acquire(&head->first);
do {
if (entry == NULL)
return NULL;
free_all(llist_del_all(&c->waiting_for_gp_ttrace))
llist_for_each_safe(pos, t, llnode)
free_one(pos);
next = READ_ONCE(entry->next); <-- trigger UAF
} while (!try_cmpxchg(&head->first, &entry, next));
In addition, there is also a theoretical race condition on the
free_by_rcu_ttrace list. This race requires two preconditions: an
in-flight Tasks Trace GP keeping c->call_rcu_ttrace_in_progress == 1,
and concurrent cross-CPU frees repopulating c->free_by_rcu_ttrace with
new nodes. Under these conditions, the following scenario triggers UAF:
// CPU0
// irq work is still busy (on PREEMPT_RT)
alloc_bulk()
llist_del_first(&c->free_by_rcu_ttrace)
entry = smp_load_acquire(&head->first);
do {
if (entry == NULL)
return NULL;
// CPU1
bpf_mem_alloc_destroy()
WRITE_ONCE(c->draining, true)
// wait for CPU0
irq_work_sync()
// CPU2
do_call_rcu_ttrace(tgt(CPU0))
if (c->draining) {
llist_del_all(&c->free_by_rcu_ttrace)
free_all()
}
// CPU0 continue
next = READ_ONCE(entry->next); <-- trigger UAF
while (!try_cmpxchg(&head->first, &entry, next));
Fix this by introducing a raw spinlock to synchronize the concurrent
consumption on waiting_for_gp_ttrace and free_by_rcu_ttrace. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix out-of-bounds read of rtt_min in sock_ops
A sockops prog reading skops->rtt_min never checks the sk type: on the
tcp_conn_request() path sock_ops->sk is a request_sock (non-full), and the
ctx rewrite casts it to a tcp_sock (full) and reads rtt_min past the end of
the request_sock, returning dirty adjacent memory.
SEC("sockops")
int prog(struct bpf_sock_ops *skops)
{
switch (skops->op) {
case BPF_SOCK_OPS_RWND_INIT:
leak = skops->rtt_min; /* reads the request_sock OOB */
...
}
}
For instance one such read returned rtt_min=0xffff8881, the high half of a
leaked kernel pointer.
Guarding that cast is exactly what SOCK_OPS_GET_FIELD() does -- it checks
is_locked_tcp_sock and returns 0 when sock_ops->sk is not a locked full
socket. Every other tcp_sock field in sock_ops goes through it; rtt_min is
the only one open-coded, so it skips the check.
Read rtt_min through SOCK_OPS_GET_FIELD() too. rtt_min is a bit special:
it is a struct minmax and we only want the current min, so pass
rtt_min.s[0].v. That is equivalent to the old hand-computed offset
offsetof(struct tcp_sock, rtt_min) + sizeof_field(struct minmax_sample, t)
(s[0] sits at rtt_min + 0 and .v at + sizeof(.t), i.e. what minmax_get()
returns), so the loaded field is unchanged and only the full-sock guard is
added. The two BUILD_BUG_ON()s that protected the hand-computed offset
are no longer needed.
Before patch:
0: r1 = *(u64 *)(r1 +0) ; r1 = skops->sk
1: r1 = *(u32 *)(r1 +2324) ; ((tcp_sock *)sk)->rtt_min.s[0].v
After patch:
0: *(u64 *)(r1 +56) = r9
1: r9 = *(u8 *)(r1 +50) ; is_locked_tcp_sock
2: if r9 == 0 goto pc+4 ; not a locked full sock -> 0
3: r9 = *(u64 *)(r1 +56)
4: r1 = *(u64 *)(r1 +0) ; r1 = skops->sk
5: r1 = *(u32 *)(r1 +2324) ; rtt_min.s[0].v
6: goto pc+2
7: r9 = *(u64 *)(r1 +56)
8: r1 = 0 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Avoid soft lockup in __htab_map_lookup_and_delete_batch()
__htab_map_lookup_and_delete_batch() has no rescheduling point. The
batch count bounds how many entries are copied out, not how many
buckets are visited, so one BPF_MAP_LOOKUP_BATCH call can walk the
map end to end. The empty-bucket fast path is worse: it stays inside
a single rcu_read_lock() / bpf_disable_instrumentation() section for
any run of consecutive empty buckets.
That holds up on small maps, but it falls apart at scale. On a
144-CPU arm64 host running a CONFIG_PREEMPT_NONE kernel, periodic
BPF_MAP_LOOKUP_BATCH calls against an LRU hash map with 16,777,216
buckets held a CPU inside the batch op for 77+ seconds and triggered
the soft lockup watchdog.
Commit 75134f16e7dd ("bpf: Add schedule points in batch ops") fixed this
same problem in the generic batch ops, but not in this htab-native path,
which every htab-based hash map variant uses for its lookup[_and_delete]
batch ops.
Complete that fix here. Leave the critical section after 64 consecutive
empty buckets, call cond_resched_tasks_rcu_qs(), and resume at the saved
bucket cursor. No locks are held at that point, and resuming from the
cursor is already the function's behavior for non-empty buckets. Add the
same call to the per-bucket loop after copy_to_user(), where every lock
has been dropped. cond_resched_rcu() is not enough here: sleeping with
bpf_prog_active elevated makes tracing programs on that CPU silently
skip their invocations.
Plain cond_resched() is not enough either. It is a no-op under PREEMPT
and PREEMPT_LAZY, the only models arm64 and x86 have offered since
commit 7dadeaa6e851 ("sched: Further restrict the preemption modes").
It is also never a Tasks RCU quiescent state, in any model: the
reschedule counts as a preemption. The walking task stays a holdout and
stalls every synchronize_rcu_tasks() caller, ftrace and BPF trampoline
teardown included, until the syscall returns [1].
cond_resched_tasks_rcu_qs() is the usual tool for that [2]. It reports
the quiescent state at each yield and still reschedules as
cond_resched() does on PREEMPT_NONE and PREEMPT_VOLUNTARY kernels. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: winwing: fix use-after-free in force feedback teardown
winwing_init_ff() passes the driver's private data, allocated with
devm_kzalloc() in winwing_probe(), as the effect context to
input_ff_create_memless(). The memoryless force-feedback core takes
ownership of that pointer and frees it with kfree() from
input_ff_destroy() (ml_ff_destroy()) when the input device is
destroyed.
Freeing a devm-managed allocation with kfree() is an invalid free, and
the same object is then released again by devres when the HID device is
torn down, a double free. As the allocation also embeds the LED class
devices, their timers and work item live on freed memory and the slab
gets corrupted. This triggers on unbind, rmmod, hot-unplug and on system
suspend, where the firmware cache walks the now-corrupt devres list.
KASAN reports:
BUG: KASAN: invalid-free in input_ff_destroy
Allocated by task N:
winwing_probe
Pass NULL as the memless context instead and fetch the driver data from
the input device in winwing_play_effect(): the HID core already stores
the hid_device as the input device's drvdata. The force-feedback core
then owns nothing that it must not free. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: Skip cond_resched() in inet_csk_listen_stop() under BPF context
bpf_sock_destroy() runs from the tcp iterator, under rcu_read_lock(). If
the sock is a listener that still has children in its accept queue,
tcp_abort() ends up in inet_csk_listen_stop() and the cond_resched()
there trips the debug check:
BUG: sleeping function called from invalid context at net/ipv4/inet_connection_sock.c:1523
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 628, name: test_progs
preempt_count: 0, expected: 0
RCU nest depth: 1, expected: 0
locks held by test_progs/628: 3, last CPU#3:
#0: ffff8881158cee18 (&p->lock){+.+.}-{4:4}, at: bpf_seq_read+0x56/0x1210
#1: ffff8881106bb858 (sk_lock-AF_INET6){+.+.}-{0:0}, at: bpf_iter_tcp_seq_show+0x32b/0x4b0
#2: ffffffffb435af20 (rcu_read_lock){....}-{1:3}, at: bpf_iter_run_prog+0x46b/0xde0
CPU: 3 UID: 0 PID: 628 Comm: test_progs Tainted: G W 7.2.0+ #65 PREEMPT
Tainted: [W]=WARN
Call Trace:
<TASK>
dump_stack_lvl+0xc1/0xf0
dump_stack+0x10/0x20
__might_resched+0x3d2/0x610
inet_csk_listen_stop+0x7b/0xbf0
tcp_abort+0x23b/0x3b0
bpf_sock_destroy+0xfc/0x140
bpf_prog_448133d24601754f_iter_tcp6_server+0x81/0x8a
bpf_iter_run_prog+0x538/0xde0
bpf_iter_tcp_seq_show+0x26b/0x4b0
bpf_seq_read+0x424/0x1210
vfs_read+0x197/0xe40
ksys_read+0x119/0x240
__x64_sys_read+0x72/0xc0
x64_sys_call+0x647/0x27e0
do_syscall_64+0xe5/0x610
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fad39b28aca
RSP: 002b:00007ffc381c61c0 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 00007ffc381c6a88 RCX: 00007fad39b28aca
RDX: 0000000000000032 RSI: 00007ffc381c6250 RDI: 0000000000000014
RBP: 00007ffc381c61e0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
R13: 0000000000000000 R14: 000055f077c1bbb0 R15: 00007fad3a0f3000
</TASK>
The commit that added the kfunc already guards lock_sock() in tcp_abort()
and udp_abort() with has_current_bpf_ctx(), but missed the listener path.
Do the same for the cond_resched(). The loop runs inside the iterator's
rcu_read_lock(), it must not reschedule or report a quiescent state there. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix divide-by-zero in btf_struct_walk()
When an access goes past the struct and the last member is a flexible
array, btf_struct_walk() folds the offset back into a single element with
(off - moff) % t->size, but never checks that the element type has a size.
BTF takes an empty struct, so this in program BTF
/* event could be empty */
struct event {
#ifdef HAVE_TIMESTAMP
__u64 ts;
#endif
};
struct batch {
int nr;
struct event events[];
};
divides by zero at prog load time. Getting there needs a PTR_TO_BTF_ID that
is not MEM_ALLOC, e.g. a plain read of a local kptr stashed in a map from a
sleepable program.
Oops: divide error: 0000 [#1] SMP KASAN PTI
RIP: 0010:btf_struct_walk+0x53f/0x1570
Call Trace:
<TASK>
btf_struct_access+0x42a/0xcd0
check_ptr_to_btf_access+0x4dc/0x1160
check_mem_access+0x3a45/0x8740
check_load_mem+0x36a/0xd10
do_check_common+0x3ef0/0xb210
bpf_check+0x6d3b/0x8580
bpf_prog_load+0xf7c/0x2720
__sys_bpf+0xa83/0x3690
__x64_sys_bpf+0xc7/0x150
x64_sys_call+0x1f3f/0x27e0
do_syscall_64+0xe5/0x610
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Reject a zero-sized element type. The fixed array path in the same function
already bails out on the same thing:
btf_struct_walk()
...
/* skip empty array */
if (moff == mtrue_end)
continue;
msize /= total_nelems; |
| In the Linux kernel, the following vulnerability has been resolved:
s390/uv: Prevent potential out-of-bounds read
When the system has more than 85 secrets, the uv_secret_list struct
array only holds up to 85 items per page, resulting in an out of bounds
read in find_secret_in_page if the targeted secret is in the next page
or not stored at all.
Fix this by looping over the number of stored secrets which is the
per sub-list count of stored secrets and not the overall count. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix race in _destroy_pages_crste()
Use READ_ONCE() in _destroy_pages_crste() to read the crste, avoid
dereferencing the pointer multiple times. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Properly handle NULL pointer in dat_cond_set_storage_key()
Some callers pass NULL as oldkey. Calling page_cond_set_storage_key()
will cause that NULL pointer to get dereferenced.
Fix by checking for NULL and assigning the pointer to a dummy local
variable to avoid crashes. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Add missing srcu in kvm_s390_set_irq_state()
Like kvm_s390_inject_vcpu(), kvm_s390_set_irq_state() also needs the
kvm->srcu or the slots lock when performing the Store status operation.
Fix by taking kvm->srcu in kvm_s390_set_irq_state(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Atomize IRQ register read/modify/write ops
[Why]
The OTG_GLOBAL_SYNC_STATUS register controls various HW IRQ sources for
the output timing generator (OTG). VUPDATE_NO_LOCK is one of them.
To enable the IRQ, driver sets the VUPDATE_NO_LOCK_EN bit in the
GLOBAL_SYNC_STATUS register.
To ack the IRQ after it fires, the driver sets the VUPDATE_NO_LOCK_CLEAR
bit in the same GLOBAL_SYNC_STATUS register.
The bit sets are done through read/modify/write operations, which are
not atomic. Thus, the following race is possible:
Thread A: IRQ handler:
*HW IRQ fires*
# IRQ disable
val = read(GLOBAL_SYNC_STATUS)
unset(val, VUPDATE_NO_LOCK_EN)
write(val, GLOBAL_SYNC_STATUS)
# ACK reads VUPDATE_NO_LOCK_EN unset
val1 = read(GLOBAL_SYNC_STATUS)
set(val1, VUPDATE_NO_LOCK_CLEAR)
# IRQ enable
val = read(GLOBAL_SYNC_STATUS)
set(val, VUPDATE_NO_LOCK_EN)
write(val, GLOBAL_SYNC_STATUS)
# BAD! clears VUPDATE_NO_LOCK_EN
write(val1, GLOBAL_SYNC_STATUS)
Regarding the tagged Fixes: change, it appears the change made this race
more likely to occur. Since VUPDATE_NO_LOCK is now the sole IRQ source
for vblank handling, a single race on high refresh panels can lead to a
time out.
[How]
The GLOBAL_SYNC_STATUS register is only one example, other IRQ control
registers also share the same scheme. On top of GLOBAL_SYNC_STATUS,
let's clean up those as well.
To keep things simple, Let's atomize the IRQ rmw ops via a single
driver-wide spinlock. Due to the small scope of this lock, it is
unlikely to cause noticeable overhead on top of all the existing locking
within the IRQ set/handle paths.
Since DM is responsible for locking, wrap dc_interrupt_set/ack with the
spinlock in the new amdgpu_dm_irq_set/ack functions. Migrate/drop all
references in DM to dc_interrupt_set/ack to use amdgpu_dm_irq_set/ack
instead.
(cherry picked from commit 70de0a0216583a53c946155f8c8adedfdca6b4e7) |
| In the Linux kernel, the following vulnerability has been resolved:
iio: trigger: cancel reenable_work before freeing trigger
iio_trigger_notify_done_atomic() defers ->reenable() into
trig->reenable_work on the system workqueue, and the worker dereferences
the owning trigger through container_of(). Nothing cancels this work
before iio_trig_release() frees the trigger, so a worker armed by the
last in-flight IRQ can outlive the free and touch freed memory.
Cancel it at the top of iio_trig_release(), which every free path
reaches through the device core's final put_device().
Found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Don't apply va_align to hugetlb mappings on AMD F15h
get_align_mask() returns huge_page_mask_align() for hugetlbfs, but get_align_bits()
adds va_align.bits regardless, so vm_unmapped_area() returns an address off the huge
page boundary and __unmap_hugepage_range() hits BUG_ON(start & ~huge_page_mask(h)) at
teardown.
This can be triggered on Carrizo and FX-8370E, both hstates.
Pass the file to get_align_bits() and skip the randomisation for hugetlbfs.
[ bp: Massage commit message. ] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: reject oversized TX packets in send_frame()
btintel_pcie_send_frame() eventually copies skb->data into a fixed
BTINTEL_PCIE_BUFFER_SIZE (4096) DMA buffer via memcpy() in
btintel_pcie_prepare_tx(), with a 4-byte PCIe type header prepended.
A user-space process with HCI_CHANNEL_USER access can inject an
oversized packet and overflow the buffer.
Reject packets larger than
BTINTEL_PCIE_BUFFER_SIZE - BTINTEL_PCIE_HCI_TYPE_LEN on entry. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: fix buffer over-read in btintel_hw_error()
The "Exception info %s" print uses skb->data + 1, but the 12-byte
payload is not guaranteed to be NUL-terminated and can be read past
its end.
Bound the print with "%.*s" and skb->len - 1. |
