| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iavf: fix PTP use-after-free during reset
Commit 7c01dbfc8a1c5f ("iavf: periodically cache PHC time") introduced a
worker to cache PHC time, but failed to stop it during reset or disable.
This creates a race condition where `iavf_reset_task()` or
`iavf_disable_vf()` free adapter resources (AQ) while the worker is still
running. If the worker triggers `iavf_queue_ptp_cmd()` during teardown, it
accesses freed memory/locks, leading to a crash.
Fix this by calling `iavf_ptp_release()` before tearing down the adapter.
This ensures `ptp_clock_unregister()` synchronously cancels the worker and
cleans up the chardev before the backing resources are destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: Fix slab-out-of-bounds in nvme_dbbuf_set
dev->online_queues is a count incremented in nvme_init_queue. Thus,
valid indices are 0 through dev->online_queues − 1.
This patch fixes the loop condition to ensure the index stays within the
valid range. Index 0 is excluded because it is the admin queue.
KASAN splat:
==================================================================
BUG: KASAN: slab-out-of-bounds in nvme_dbbuf_free drivers/nvme/host/pci.c:377 [inline]
BUG: KASAN: slab-out-of-bounds in nvme_dbbuf_set+0x39c/0x400 drivers/nvme/host/pci.c:404
Read of size 2 at addr ffff88800592a574 by task kworker/u8:5/74
CPU: 0 UID: 0 PID: 74 Comm: kworker/u8:5 Not tainted 6.19.0-dirty #10 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Workqueue: nvme-reset-wq nvme_reset_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xea/0x150 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xce/0x5d0 mm/kasan/report.c:482
kasan_report+0xdc/0x110 mm/kasan/report.c:595
__asan_report_load2_noabort+0x18/0x20 mm/kasan/report_generic.c:379
nvme_dbbuf_free drivers/nvme/host/pci.c:377 [inline]
nvme_dbbuf_set+0x39c/0x400 drivers/nvme/host/pci.c:404
nvme_reset_work+0x36b/0x8c0 drivers/nvme/host/pci.c:3252
process_one_work+0x956/0x1aa0 kernel/workqueue.c:3257
process_scheduled_works kernel/workqueue.c:3340 [inline]
worker_thread+0x65c/0xe60 kernel/workqueue.c:3421
kthread+0x41a/0x930 kernel/kthread.c:463
ret_from_fork+0x6f8/0x8c0 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246
</TASK>
Allocated by task 34 on cpu 1 at 4.241550s:
kasan_save_stack+0x2c/0x60 mm/kasan/common.c:57
kasan_save_track+0x1c/0x70 mm/kasan/common.c:78
kasan_save_alloc_info+0x3c/0x50 mm/kasan/generic.c:570
poison_kmalloc_redzone mm/kasan/common.c:398 [inline]
__kasan_kmalloc+0xb5/0xc0 mm/kasan/common.c:415
kasan_kmalloc include/linux/kasan.h:263 [inline]
__do_kmalloc_node mm/slub.c:5657 [inline]
__kmalloc_node_noprof+0x2bf/0x8d0 mm/slub.c:5663
kmalloc_array_node_noprof include/linux/slab.h:1075 [inline]
nvme_pci_alloc_dev drivers/nvme/host/pci.c:3479 [inline]
nvme_probe+0x2f1/0x1820 drivers/nvme/host/pci.c:3534
local_pci_probe+0xef/0x1c0 drivers/pci/pci-driver.c:324
pci_call_probe drivers/pci/pci-driver.c:392 [inline]
__pci_device_probe drivers/pci/pci-driver.c:417 [inline]
pci_device_probe+0x743/0x920 drivers/pci/pci-driver.c:451
call_driver_probe drivers/base/dd.c:583 [inline]
really_probe+0x29b/0xb70 drivers/base/dd.c:661
__driver_probe_device+0x3b0/0x4a0 drivers/base/dd.c:803
driver_probe_device+0x56/0x1f0 drivers/base/dd.c:833
__driver_attach_async_helper+0x155/0x340 drivers/base/dd.c:1159
async_run_entry_fn+0xa6/0x4b0 kernel/async.c:129
process_one_work+0x956/0x1aa0 kernel/workqueue.c:3257
process_scheduled_works kernel/workqueue.c:3340 [inline]
worker_thread+0x65c/0xe60 kernel/workqueue.c:3421
kthread+0x41a/0x930 kernel/kthread.c:463
ret_from_fork+0x6f8/0x8c0 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246
The buggy address belongs to the object at ffff88800592a000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 244 bytes to the right of
allocated 1152-byte region [ffff88800592a000, ffff88800592a480)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x5928
head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
anon flags: 0xfffffc0000040(head|node=0|zone=1|lastcpupid=0x1fffff)
page_type: f5(slab)
raw: 000fffffc0000040 ffff888001042000 0000000000000000 dead000000000001
raw: 0000000000000000 0000000000080008 00000000f5000000 0000000000000000
head: 000fffffc0000040 ffff888001042000 00000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_cthelper: fix OOB read in nfnl_cthelper_dump_table()
nfnl_cthelper_dump_table() has a 'goto restart' that jumps to a label
inside the for loop body. When the "last" helper saved in cb->args[1]
is deleted between dump rounds, every entry fails the (cur != last)
check, so cb->args[1] is never cleared. The for loop finishes with
cb->args[0] == nf_ct_helper_hsize, and the 'goto restart' jumps back
into the loop body bypassing the bounds check, causing an 8-byte
out-of-bounds read on nf_ct_helper_hash[nf_ct_helper_hsize].
The 'goto restart' block was meant to re-traverse the current bucket
when "last" is no longer found, but it was placed after the for loop
instead of inside it. Move the block into the for loop body so that
the restart only occurs while cb->args[0] is still within bounds.
BUG: KASAN: slab-out-of-bounds in nfnl_cthelper_dump_table+0x9f/0x1b0
Read of size 8 at addr ffff888104ca3000 by task poc_cthelper/131
Call Trace:
nfnl_cthelper_dump_table+0x9f/0x1b0
netlink_dump+0x333/0x880
netlink_recvmsg+0x3e2/0x4b0
sock_recvmsg+0xde/0xf0
__sys_recvfrom+0x150/0x200
__x64_sys_recvfrom+0x76/0x90
do_syscall_64+0xc3/0x6e0
Allocated by task 1:
__kvmalloc_node_noprof+0x21b/0x700
nf_ct_alloc_hashtable+0x65/0xd0
nf_conntrack_helper_init+0x21/0x60
nf_conntrack_init_start+0x18d/0x300
nf_conntrack_standalone_init+0x12/0xc0 |
| In the Linux kernel, the following vulnerability has been resolved:
media: verisilicon: Avoid G2 bus error while decoding H.264 and HEVC
For the i.MX8MQ platform, there is a hardware limitation: the g1 VPU and
g2 VPU cannot decode simultaneously; otherwise, it will cause below bus
error and produce corrupted pictures, even potentially lead to system hang.
[ 110.527986] hantro-vpu 38310000.video-codec: frame decode timed out.
[ 110.583517] hantro-vpu 38310000.video-codec: bus error detected.
Therefore, it is necessary to ensure that g1 and g2 operate alternately.
This allows for successful multi-instance decoding of H.264 and HEVC.
To achieve this, g1 and g2 share the same v4l2_m2m_dev, and then the
v4l2_m2m_dev can handle the scheduling. |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: ov5647: Initialize subdev before controls
In ov5647_init_controls() we call v4l2_get_subdevdata, but it is
initialized by v4l2_i2c_subdev_init() in the probe, which currently
happens after init_controls(). This can result in a segfault if the
error condition is hit, and we try to access i2c_client, so fix the
order. |
| In the Linux kernel, the following vulnerability has been resolved:
most: core: fix leak on early registration failure
A recent commit fixed a resource leak on early registration failures but
for some reason left out the first error path which still leaks the
resources associated with the interface.
Fix up also the first error path so that the interface is always
released on errors. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix dsc eDP issue
[why]
Need to add function hook check before use |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: Reinit dev->spinlock between attachments to low-level drivers
`struct comedi_device` is the main controlling structure for a COMEDI
device created by the COMEDI subsystem. It contains a member `spinlock`
containing a spin-lock that is initialized by the COMEDI subsystem, but
is reserved for use by a low-level driver attached to the COMEDI device
(at least since commit 25436dc9d84f ("Staging: comedi: remove RT
code")).
Some COMEDI devices (those created on initialization of the COMEDI
subsystem when the "comedi.comedi_num_legacy_minors" parameter is
non-zero) can be attached to different low-level drivers over their
lifetime using the `COMEDI_DEVCONFIG` ioctl command. This can result in
inconsistent lock states being reported when there is a mismatch in the
spin-lock locking levels used by each low-level driver to which the
COMEDI device has been attached. Fix it by reinitializing
`dev->spinlock` before calling the low-level driver's `attach` function
pointer if `CONFIG_LOCKDEP` is enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
net/ipv6: ioam6: prevent schema length wraparound in trace fill
ioam6_fill_trace_data() stores the schema contribution to the trace
length in a u8. With bit 22 enabled and the largest schema payload,
sclen becomes 1 + 1020 / 4, wraps from 256 to 0, and bypasses the
remaining-space check. __ioam6_fill_trace_data() then positions the
write cursor without reserving the schema area but still copies the
4-byte schema header and the full schema payload, overrunning the trace
buffer.
Keep sclen in an unsigned int so the remaining-space check and the write
cursor calculation both see the full schema length. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_subset: Fix unbalanced refcnt in geth_free
geth_alloc() increments the reference count, but geth_free() fails to
decrement it. This prevents the configuration of attributes via configfs
after unlinking the function.
Decrement the reference count in geth_free() to ensure proper cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: dts: qcom: monaco: Reserve full Gunyah metadata region
We observe spurious "Synchronous External Abort" exceptions
(ESR=0x96000010) and kernel crashes on Monaco-based platforms.
These faults are caused by the kernel inadvertently accessing
hypervisor-owned memory that is not properly marked as reserved.
>From boot log, The Qualcomm hypervisor reports the memory range
at 0x91a80000 of size 0x80000 (512 KiB) as hypervisor-owned:
qhee_hyp_assign_remove_memory: 0x91a80000/0x80000 -> ret 0
However, the EFI memory map provided by firmware only reserves the
subrange 0x91a40000–0x91a87fff (288 KiB). The remaining portion
(0x91a88000–0x91afffff) is incorrectly reported as conventional
memory (from efi debug):
efi: 0x000091a40000-0x000091a87fff [Reserved...]
efi: 0x000091a88000-0x0000938fffff [Conventional...]
As a result, the allocator may hand out PFNs inside the hypervisor
owned region, causing fatal aborts when the kernel accesses those
addresses.
Add a reserved-memory carveout for the Gunyah hypervisor metadata
at 0x91a80000 (512 KiB) and mark it as no-map so Linux does not
map or allocate from this area.
For the record:
Hyp version: gunyah-e78adb36e debug (2025-11-17 05:38:05 UTC)
UEFI Ver: 6.0.260122.BOOT.MXF.1.0.c1-00449-KODIAKLA-1 |
| In the Linux kernel, the following vulnerability has been resolved:
mshv_vtl: Fix vmemmap_shift exceeding MAX_FOLIO_ORDER
When registering VTL0 memory via MSHV_ADD_VTL0_MEMORY, the kernel
computes pgmap->vmemmap_shift as the number of trailing zeros in the
OR of start_pfn and last_pfn, intending to use the largest compound
page order both endpoints are aligned to.
However, this value is not clamped to MAX_FOLIO_ORDER, so a
sufficiently aligned range (e.g. physical range
[0x800000000000, 0x800080000000), corresponding to start_pfn=0x800000000
with 35 trailing zeros) can produce a shift larger than what
memremap_pages() accepts, triggering a WARN and returning -EINVAL:
WARNING: ... memremap_pages+0x512/0x650
requested folio size unsupported
The MAX_FOLIO_ORDER check was added by
commit 646b67d57589 ("mm/memremap: reject unreasonable folio/compound
page sizes in memremap_pages()").
Fix this by clamping vmemmap_shift to MAX_FOLIO_ORDER so we always
request the largest order the kernel supports, in those cases, rather
than an out-of-range value.
Also fix the error path to propagate the actual error code from
devm_memremap_pages() instead of hard-coding -EFAULT, which was
masking the real -EINVAL return. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid uninit-value access in f2fs_sanity_check_node_footer
syzbot reported a f2fs bug as below:
BUG: KMSAN: uninit-value in f2fs_sanity_check_node_footer+0x374/0xa20 fs/f2fs/node.c:1520
f2fs_sanity_check_node_footer+0x374/0xa20 fs/f2fs/node.c:1520
f2fs_finish_read_bio+0xe1e/0x1d60 fs/f2fs/data.c:177
f2fs_read_end_io+0x6ab/0x2220 fs/f2fs/data.c:-1
bio_endio+0x1006/0x1160 block/bio.c:1792
submit_bio_noacct+0x533/0x2960 block/blk-core.c:891
submit_bio+0x57a/0x620 block/blk-core.c:926
blk_crypto_submit_bio include/linux/blk-crypto.h:203 [inline]
f2fs_submit_read_bio+0x12c/0x360 fs/f2fs/data.c:557
f2fs_submit_page_bio+0xee2/0x1450 fs/f2fs/data.c:775
read_node_folio+0x384/0x4b0 fs/f2fs/node.c:1481
__get_node_folio+0x5db/0x15d0 fs/f2fs/node.c:1576
f2fs_get_inode_folio+0x40/0x50 fs/f2fs/node.c:1623
do_read_inode fs/f2fs/inode.c:425 [inline]
f2fs_iget+0x1209/0x9380 fs/f2fs/inode.c:596
f2fs_fill_super+0x8f5a/0xb2e0 fs/f2fs/super.c:5184
get_tree_bdev_flags+0x6e6/0x920 fs/super.c:1694
get_tree_bdev+0x38/0x50 fs/super.c:1717
f2fs_get_tree+0x35/0x40 fs/f2fs/super.c:5436
vfs_get_tree+0xb3/0x5d0 fs/super.c:1754
fc_mount fs/namespace.c:1193 [inline]
do_new_mount_fc fs/namespace.c:3763 [inline]
do_new_mount+0x885/0x1dd0 fs/namespace.c:3839
path_mount+0x7a2/0x20b0 fs/namespace.c:4159
do_mount fs/namespace.c:4172 [inline]
__do_sys_mount fs/namespace.c:4361 [inline]
__se_sys_mount+0x704/0x7f0 fs/namespace.c:4338
__x64_sys_mount+0xe4/0x150 fs/namespace.c:4338
x64_sys_call+0x39f0/0x3ea0 arch/x86/include/generated/asm/syscalls_64.h:166
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x134/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The root cause is: in f2fs_finish_read_bio(), we may access uninit data
in folio if we failed to read the data from device into folio, let's add
a check condition to avoid such issue. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: require a full NFS mode SID before reading mode bits
parse_dacl() treats an ACE SID matching sid_unix_NFS_mode as an NFS
mode SID and reads sid.sub_auth[2] to recover the mode bits.
That assumes the ACE carries three subauthorities, but compare_sids()
only compares min(a, b) subauthorities. A malicious server can return
an ACE with num_subauth = 2 and sub_auth[] = {88, 3}, which still
matches sid_unix_NFS_mode and then drives the sub_auth[2] read four
bytes past the end of the ACE.
Require num_subauth >= 3 before treating the ACE as an NFS mode SID.
This keeps the fix local to the special-SID mode path without changing
compare_sids() semantics for the rest of cifsacl. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Eagerly init vgic dist/redist on vgic creation
If vgic_allocate_private_irqs_locked() fails for any odd reason,
we exit kvm_vgic_create() early, leaving dist->rd_regions uninitialised.
kvm_vgic_dist_destroy() then comes along and walks into the weeds
trying to free the RDs. Got to love this stuff.
Solve it by moving all the static initialisation early, and make
sure that if we fail halfway, we're in a reasonable shape to
perform the rest of the teardown. While at it, reset the vgic model
on failure, just in case... |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: mipi-i3c-hci: Correct RING_CTRL_ABORT handling in DMA dequeue
The logic used to abort the DMA ring contains several flaws:
1. The driver unconditionally issues a ring abort even when the ring has
already stopped.
2. The completion used to wait for abort completion is never
re-initialized, resulting in incorrect wait behavior.
3. The abort sequence unintentionally clears RING_CTRL_ENABLE, which
resets hardware ring pointers and disrupts the controller state.
4. If the ring is already stopped, the abort operation should be
considered successful without attempting further action.
Fix the abort handling by checking whether the ring is running before
issuing an abort, re-initializing the completion when needed, ensuring that
RING_CTRL_ENABLE remains asserted during abort, and treating an already
stopped ring as a successful condition. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: memfd_luo: always dirty all folios
A dirty folio is one which has been written to. A clean folio is its
opposite. Since a clean folio has no user data, it can be freed under
memory pressure.
memfd preservation with LUO saves the flag at preserve(). This is
problematic. The folio might get dirtied later. Saving it at freeze()
also doesn't work, since the dirty bit from PTE is normally synced at
unmap and there might still be mappings of the file at freeze().
To see why this is a problem, say a folio is clean at preserve, but gets
dirtied later. The serialized state of the folio will mark it as clean.
After retrieve, the next kernel will see the folio as clean and might try
to reclaim it under memory pressure. This will result in losing user
data.
Mark all folios of the file as dirty, and always set the
MEMFD_LUO_FOLIO_DIRTY flag. This comes with the side effect of making all
clean folios un-reclaimable. This is a cost that has to be paid for
participants of live update. It is not expected to be a common use case
to preserve a lot of clean folios anyway.
Since the value of pfolio->flags is a constant now, drop the flags
variable and set it directly. |
| In the Linux kernel, the following vulnerability has been resolved:
nstree: tighten permission checks for listing
Even privileged services should not necessarily be able to see other
privileged service's namespaces so they can't leak information to each
other. Use may_see_all_namespaces() helper that centralizes this policy
until the nstree adapts. |
| In the Linux kernel, the following vulnerability has been resolved:
nsfs: tighten permission checks for handle opening
Even privileged services should not necessarily be able to see other
privileged service's namespaces so they can't leak information to each
other. Use may_see_all_namespaces() helper that centralizes this policy
until the nstree adapts. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix starvation of scx_enable() under fair-class saturation
During scx_enable(), the READY -> ENABLED task switching loop changes the
calling thread's sched_class from fair to ext. Since fair has higher
priority than ext, saturating fair-class workloads can indefinitely starve
the enable thread, hanging the system. This was introduced when the enable
path switched from preempt_disable() to scx_bypass() which doesn't protect
against fair-class starvation. Note that the original preempt_disable()
protection wasn't complete either - in partial switch modes, the calling
thread could still be starved after preempt_enable() as it may have been
switched to ext class.
Fix it by offloading the enable body to a dedicated system-wide RT
(SCHED_FIFO) kthread which cannot be starved by either fair or ext class
tasks. scx_enable() lazily creates the kthread on first use and passes the
ops pointer through a struct scx_enable_cmd containing the kthread_work,
then synchronously waits for completion.
The workfn runs on a different kthread from sch->helper (which runs
disable_work), so it can safely flush disable_work on the error path
without deadlock. |
