| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix overrun check in netfs_extract_user_iter()
Fix netfs_extract_user_iter() so that if iov_iter_extract_pages() overfills
pages[], then those pages don't get included in the iterator constructed at
the end of the function. If there was an overfill, memory corruption has
already happened. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: bla: fix report_work leak on backbone_gw purge
batadv_bla_purge_backbone_gw() removes stale backbone gateway entries,
but fails to properly handle their associated report_work:
- If report_work is running, the purge must wait for it to finish before
freeing the backbone_gw, otherwise the worker may access freed memory
(e.g. bat_priv).
- If report_work is pending, the purge must cancel it and release the
reference held for that pending work item.
The previous implementation called hlist_for_each_entry_safe() inside a
spin_lock_bh() section, but cancel_work_sync() may sleep and therefore
cannot be called from within a spinlock-protected region.
Restructure the loop to handle one entry per spinlock critical section:
acquire the lock, find the next entry to purge, remove it from the hash
list, then release the lock before calling cancel_work_sync() and
dropping the hash_entry reference. Repeat until no more entries require
purging. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: consume only present negotiated TTLM maps
ieee80211_tid_to_link_map_size_ok() validates negotiated TTLM elements
against the number of link-map entries indicated by link_map_presence.
ieee80211_parse_neg_ttlm() must consume the same layout.
The parser advanced its cursor for every TID, including TIDs whose
presence bit is clear and therefore have no map bytes in the element.
A sparse map can then make a later present TID read past the validated
element.
The bad bytes land in neg_ttlm->{up,down}link[tid] but are gated by
valid_links before being applied to driver state, so a peer cannot
turn the read into a policy change. Under KUnit + KASAN with an
exact-sized element allocation the OOB read is reported as a
slab-out-of-bounds; whether the same trigger fires under the
production RX path depends on surrounding allocator state.
Advance the cursor only when the current TID has a map present. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: fix double free in rvu_rep_rsrc_init()
rvu_rep_rsrc_init() allocates queue memory before calling
otx2_init_hw_resources(). When hardware resource setup fails,
otx2_init_hw_resources() already unwinds the partially initialized
SQ, CQ, and aura state before returning an error. The representor
error path then calls otx2_free_hw_resources() again and can free
the same resources a second time.
Fix this by splitting the cleanup labels so that a failure from
otx2_init_hw_resources() only releases queue memory. Keep the
otx2_free_hw_resources() call for failures that happen after
hardware resource initialization completed successfully.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc3.
Runtime validation was not performed because reproducing this path
requires OcteonTX2 representor hardware. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: tps65219: fix irq_data.rdev not being assigned
Commit 64a6b577490c ("regulator: tps65219: Remove debugging helper
function") removed the tps65219_get_rdev_by_name() helper along with
the irq_data.rdev assignment that depended on it. This left
irq_data.rdev uninitialized for all IRQs, causing undefined behavior
when regulator_notifier_call_chain() is called from the IRQ handler:
Internal error: Oops: 0000000096000004
pc : regulator_notifier_call_chain
lr : tps65219_regulator_irq_handler
Call trace:
regulator_notifier_call_chain
tps65219_regulator_irq_handler
handle_nested_irq
regmap_irq_thread
irq_thread_fn
irq_thread
kthread
ret_from_fork
Instead of restoring a dedicated lookup array, restructure the probe
function to combine regulator registration with IRQ registration in
the same loop. This way the rdev returned by devm_regulator_register()
is naturally available for assigning to irq_data.rdev without any
auxiliary data structure.
Non-regulator IRQs (SENSOR, TIMEOUT) that don't correspond to any
registered regulator are registered with rdev=NULL, and the IRQ handler
is protected with a NULL check to avoid crashing. |
| OpenEMR through 8.2.0 contains an authentication bypass vulnerability that allows attackers with valid credentials to circumvent multi-factor authentication by exploiting the exposed OAuth2 password grant flow through an unauthenticated client registration endpoint. Attackers can register an OAuth2 client via the unauthenticated registration endpoint and use the password grant to exchange credentials for an API access token, bypassing the normal web interface authentication and any enforced multi-factor authentication controls. |
| OpenEMR through 8.2.0 contains an authenticated SQL injection vulnerability in the backup configuration import feature that allows administrators with admin or super ACL privileges to execute arbitrary DDL and DML statements against the application database by uploading a crafted SQL file at the form_step=202 parameter in backup.php. Attackers can exploit the unfiltered shell_exec invocation of the mysql command-line client to extract credential hashes, modify access control tables, inject backdoor accounts, create persistent triggers or stored procedures, and write arbitrary files to the filesystem where MySQL FILE privileges and permissive secure_file_priv settings are configured. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Apache Jena Fuseki.
This issue affects Apache Jena Fuseki: through 6.1.0.
Users are recommended to upgrade to version 6.2.0, which fixes the issue. |
| A vulnerability was identified in textPlus Text Message and Call App up to 8.3.5 on Android. This impacts the function DialerActivity of the component com.gogii.textplus. Such manipulation leads to improper export of android application components. The attack needs to be performed locally. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure. |
| Admidio before 5.0.11 contains an insecure direct object reference vulnerability in the save_temporary mode of mylist_function.php that allows authenticated users to hijack list configurations. Attackers can enumerate global list UUIDs and overwrite admin-curated global lists or other users' private lists by supplying a list_uuid parameter, transferring ownership and demoting global lists to personal configurations. |
| XML::Sig versions from 0.29 before 0.72 for Perl allow signature verification bypass because verify returns true when every signature was skipped before any cryptographic check.
verify in lib/XML/Sig.pm counts the `//dsig:Signature` elements into `$numsigs` and iterates over them, but two paths reach `next` before any digest or key check runs: a `SignedInfo/Reference/@URI` that resolves to no element while `$numsigs` is greater than 1, and, when `id_attr` is set, a reference that does not match the requested ID. The loop records nothing about what it checked, so when every signature takes one of those paths control reaches the unconditional `return 1` that ends verify. Two `Signature` elements whose Reference URI names an ID that no element carries is enough, as is one such element combined with `id_attr`.
Any caller that passes untrusted XML to verify can receive a true return for a document in which no digest and no signature value was checked; a `cert` or `cert_text` trust anchor does not change this, because no key check runs. Versions up to 0.28 use an XML::XPath based verify that has no such skip and are not affected. |
| SiYuan versions <= v3.7.2 expose the /api/search/searchEmbedBlock endpoint, which passes a client-supplied SQL statement verbatim to the main read-write siyuan.db handle with no single-statement, read-only, or admin restrictions. The endpoint is gated only by CheckAuth, making it reachable by the publish RoleReader token and by anonymous users when publish authentication is disabled. Because the underlying driver executes stacked statements, an attacker can read and modify content across all opened cleartext notebooks (encrypted per-box notebooks are excluded). Fixed in v3.7.3. |
| Net::SAML2 versions before 0.86 for Perl allow SAML authentication bypass via XML signature wrapping because new_from_xml reads assertion identity with document-wide XPath instead of the signed subtree.
new_from_xml reads the NameID, attribute values, SessionIndex, audience and other identity fields with document-wide XPath, such as //saml:Assertion/saml:AttributeStatement/saml:Attribute and //saml:Subject/saml:NameID, which select the first matching element in document order rather than the element covered by the verified signature. handle_response confirms that a signature is present and, when a cacert is configured, that it chains to the CA, but XML::Sig verifies only the element named by the signature's Reference URI, so unsigned sibling assertions in the same document are not covered. An attacker who holds any one IdP-signed assertion can add an unsigned attacker-authored assertion earlier in document order; the signature still verifies and the document-order XPath returns the attacker's NameID and attributes.
Any caller that passes an untrusted Response to new_from_xml can accept identity fields from an assertion the IdP never signed, even when a cacert trust anchor is configured, so a party holding one valid IdP-signed assertion can authenticate as an arbitrary user. |
| A vulnerability was detected in GL.iNet GL-MT3000 up to 4.4.5. The affected element is the function logread.get_system_log of the file /usr/lib/oui-httpd/rpc/logread of the component Logread Lua RPC plugin. The manipulation of the argument module results in command injection. The attack can be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure and confirmed the existence of the vulnerability. |
| A flaw was found in SSSD. The sss_nss_protocol_parse_addr() function in the NSS responder does not validate the addrlen field against the remaining packet body size. A local attacker can exploit this via a crafted GETHOSTBYADDR request to the NSS responder socket, causing an out-of-bounds read and process crash, resulting in a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers/base/memory: set mem->altmap after successful device registration
If __add_memory_block() fails at xa_store() (under memory pressure for
example), device_unregister() is called, which eventually triggers
memory_block_release() with mem->altmap still set, causing a
WARN_ON(mem->altmap). This was triggered by modifying virtio-mem driver.
Fix this by delaying the assignment of mem->altmap until after
__add_memory_block() has succeeded. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: modedb: fix a possible UAF in fb_find_mode()
If mode_option is NULL, it is assigned from mode_option_buf:
if (!mode_option) {
fb_get_options(NULL, &mode_option_buf);
mode_option = mode_option_buf;
}
Later, name is assigned from mode_option:
const char *name = mode_option;
However, mode_option_buf is freed before name is no longer used:
kfree(mode_option_buf);
while name is still accessed by:
if ((name_matches(db[i], name, namelen) ||
Since name aliases mode_option_buf, this may result in a
use-after-free.
Fix this by extending the lifetime of mode_option_buf until the end of the
function by using scope-based resource management for cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mld: validate sta_mask before ffs() in BA session handlers
Three BA session handlers use ffs(ba_data->sta_mask) - 1 to derive a
station ID without checking that sta_mask is non-zero. When sta_mask is
zero, ffs() returns 0 and the subtraction wraps to 0xFFFFFFFF, causing
an out-of-bounds access on fw_id_to_link_sta[].
Add WARN_ON_ONCE(!ba_data->sta_mask) guards before each ffs() call,
consistent with the existing check in iwl_mld_ampdu_rx_start(). |
| A vulnerability was found in Wavlink WL-NU516U1 708c073-mt7628. This impacts the function change_password of the file nas.cgi. The manipulation of the argument User1Passwd results in stack-based buffer overflow. The attack can be executed remotely. The exploit has been made public and could be used. The affected component should be upgraded. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| LightFTP 2.3.1 contains a residual race condition vulnerability (an incomplete fix for CVE-2024-11144) in the worker_thread_cleanup() function of ftpserv.c that allows remote unauthenticated attackers to destabilize or crash the daemon by triggering unsynchronized access to shared per-connection state without holding the required mutex lock. Attackers can send a data-transfer command such as LIST followed immediately by ABOR to exploit the missing synchronization on shared context and detached thread id reuse, resulting in daemon destabilization or crash which can lead to a denial of service. The 2.3.1 patch only narrowed the timing window (an extra re-check and reordered cleanup), it never added the missing lock, so the underlying race remains. |
