| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c/tw9903: Fix potential memory leak in tw9903_probe()
In one of the error paths in tw9903_probe(), the memory allocated in
v4l2_ctrl_handler_init() and v4l2_ctrl_new_std() is not freed. Fix that
by calling v4l2_ctrl_handler_free() on the handler in that error path. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix memory leak on failure path
cfg80211_inform_bss_frame() may return NULL on failure. In that case,
the allocated buffer 'buf' is not freed and the function returns early,
leading to potential memory leak.
Fix this by ensuring that 'buf' is freed on both success and failure paths. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_h323: fix OOB read in decode_choice()
In decode_choice(), the boundary check before get_len() uses the
variable `len`, which is still 0 from its initialization at the top of
the function:
unsigned int type, ext, len = 0;
...
if (ext || (son->attr & OPEN)) {
BYTE_ALIGN(bs);
if (nf_h323_error_boundary(bs, len, 0)) /* len is 0 here */
return H323_ERROR_BOUND;
len = get_len(bs); /* OOB read */
When the bitstream is exactly consumed (bs->cur == bs->end), the check
nf_h323_error_boundary(bs, 0, 0) evaluates to (bs->cur + 0 > bs->end),
which is false. The subsequent get_len() call then dereferences
*bs->cur++, reading 1 byte past the end of the buffer. If that byte
has bit 7 set, get_len() reads a second byte as well.
This can be triggered remotely by sending a crafted Q.931 SETUP message
with a User-User Information Element containing exactly 2 bytes of
PER-encoded data ({0x08, 0x00}) to port 1720 through a firewall with
the nf_conntrack_h323 helper active. The decoder fully consumes the
PER buffer before reaching this code path, resulting in a 1-2 byte
heap-buffer-overflow read confirmed by AddressSanitizer.
Fix this by checking for 2 bytes (the maximum that get_len() may read)
instead of the uninitialized `len`. This matches the pattern used at
every other get_len() call site in the same file, where the caller
checks for 2 bytes of available data before calling get_len(). |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: prevent races in ->query_interfaces()
It was possible for two query interface works to be concurrently trying
to update the interfaces.
Prevent this by checking and updating iface_last_update under
iface_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: prodikeys: Check presence of pm->input_ep82
Fake USB devices can send their own report descriptors for which the
input_mapping() hook does not get called. In this case, pm->input_ep82 stays
NULL, which leads to a crash later.
This does not happen with the real device, but can be provoked by imposing as
one. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: pm: in-kernel: always set ID as avail when rm endp
Syzkaller managed to find a combination of actions that was generating
this warning:
WARNING: net/mptcp/pm_kernel.c:1074 at __mark_subflow_endp_available net/mptcp/pm_kernel.c:1074 [inline], CPU#1: syz.7.48/2535
WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_fullmesh net/mptcp/pm_kernel.c:1446 [inline], CPU#1: syz.7.48/2535
WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_set_flags_all net/mptcp/pm_kernel.c:1474 [inline], CPU#1: syz.7.48/2535
WARNING: net/mptcp/pm_kernel.c:1074 at mptcp_pm_nl_set_flags+0x5de/0x640 net/mptcp/pm_kernel.c:1538, CPU#1: syz.7.48/2535
Modules linked in:
CPU: 1 UID: 0 PID: 2535 Comm: syz.7.48 Not tainted 6.18.0-03987-gea5f5e676cf5 #17 PREEMPT(voluntary)
Hardware name: QEMU Ubuntu 25.10 PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_kernel.c:1074 [inline]
RIP: 0010:mptcp_pm_nl_fullmesh net/mptcp/pm_kernel.c:1446 [inline]
RIP: 0010:mptcp_pm_nl_set_flags_all net/mptcp/pm_kernel.c:1474 [inline]
RIP: 0010:mptcp_pm_nl_set_flags+0x5de/0x640 net/mptcp/pm_kernel.c:1538
Code: 89 c7 e8 c5 8c 73 fe e9 f7 fd ff ff 49 83 ef 80 e8 b7 8c 73 fe 4c 89 ff be 03 00 00 00 e8 4a 29 e3 fe eb ac e8 a3 8c 73 fe 90 <0f> 0b 90 e9 3d ff ff ff e8 95 8c 73 fe b8 a1 ff ff ff eb 1a e8 89
RSP: 0018:ffffc9001535b820 EFLAGS: 00010287
netdevsim0: tun_chr_ioctl cmd 1074025677
RAX: ffffffff82da294d RBX: 0000000000000001 RCX: 0000000000080000
RDX: ffffc900096d0000 RSI: 00000000000006d6 RDI: 00000000000006d7
netdevsim0: linktype set to 823
RBP: ffff88802cdb2240 R08: 00000000000104ae R09: ffffffffffffffff
R10: ffffffff82da27d4 R11: 0000000000000000 R12: 0000000000000000
R13: ffff88801246d8c0 R14: ffffc9001535b8b8 R15: ffff88802cdb1800
FS: 00007fc6ac5a76c0(0000) GS:ffff8880f90c8000(0000) knlGS:0000000000000000
netlink: 'syz.3.50': attribute type 5 has an invalid length.
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
netlink: 1232 bytes leftover after parsing attributes in process `syz.3.50'.
CR2: 0000200000010000 CR3: 0000000025b1a000 CR4: 0000000000350ef0
Call Trace:
<TASK>
mptcp_pm_set_flags net/mptcp/pm_netlink.c:277 [inline]
mptcp_pm_nl_set_flags_doit+0x1d7/0x210 net/mptcp/pm_netlink.c:282
genl_family_rcv_msg_doit+0x117/0x180 net/netlink/genetlink.c:1115
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x3a8/0x3f0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x16d/0x240 net/netlink/af_netlink.c:2550
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x3e9/0x4c0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x4ab/0x5b0 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:718 [inline]
__sock_sendmsg+0xc9/0xf0 net/socket.c:733
____sys_sendmsg+0x272/0x3b0 net/socket.c:2608
___sys_sendmsg+0x2de/0x320 net/socket.c:2662
__sys_sendmsg net/socket.c:2694 [inline]
__do_sys_sendmsg net/socket.c:2699 [inline]
__se_sys_sendmsg net/socket.c:2697 [inline]
__x64_sys_sendmsg+0x110/0x1a0 net/socket.c:2697
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xed/0x360 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fc6adb66f6d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fc6ac5a6ff8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007fc6addf5fa0 RCX: 00007fc6adb66f6d
RDX: 0000000000048084 RSI: 00002000000002c0 RDI: 000000000000000e
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: tcp - fix packet extraction from stream
When processing TCP stream data in ovpn_tcp_recv, we receive large
cloned skbs from __strp_rcv that may contain multiple coalesced packets.
The current implementation has two bugs:
1. Header offset overflow: Using pskb_pull with large offsets on
coalesced skbs causes skb->data - skb->head to exceed the u16 storage
of skb->network_header. This causes skb_reset_network_header to fail
on the inner decapsulated packet, resulting in packet drops.
2. Unaligned protocol headers: Extracting packets from arbitrary
positions within the coalesced TCP stream provides no alignment
guarantees for the packet data causing performance penalties on
architectures without efficient unaligned access. Additionally,
openvpn's 2-byte length prefix on TCP packets causes the subsequent
4-byte opcode and packet ID fields to be inherently misaligned.
Fix both issues by allocating a new skb for each openvpn packet and
using skb_copy_bits to extract only the packet content into the new
buffer, skipping the 2-byte length prefix. Also, check the length before
invoking the function that performs the allocation to avoid creating an
invalid skb.
If the packet has to be forwarded to userspace the 2-byte prefix can be
pushed to the head safely, without misalignment.
As a side effect, this approach also avoids the expensive linearization
that pskb_pull triggers on cloned skbs with page fragments. In testing,
this resulted in TCP throughput improvements of up to 74%. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: fsl-imx8mq-usb: set platform driver data
Add missing platform_set_drvdata() as the data will be used in remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: Add support for TSV110 Spectre-BHB mitigation
The TSV110 processor is vulnerable to the Spectre-BHB (Branch History
Buffer) attack, which can be exploited to leak information through
branch prediction side channels. This commit adds the MIDR of TSV110
to the list for software mitigation. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: fiemap page fault fix
In gfs2_fiemap(), we are calling iomap_fiemap() while holding the inode
glock. This can lead to recursive glock taking if the fiemap buffer is
memory mapped to the same inode and accessing it triggers a page fault.
Fix by disabling page faults for iomap_fiemap() and faulting in the
buffer by hand if necessary.
Fixes xfstest generic/742. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: of: display_timing: fix refcount leak in of_get_display_timings()
of_parse_phandle() returns a device_node with refcount incremented,
which is stored in 'entry' and then copied to 'native_mode'. When the
error paths at lines 184 or 192 jump to 'entryfail', native_mode's
refcount is not decremented, causing a refcount leak.
Fix this by changing the goto target from 'entryfail' to 'timingfail',
which properly calls of_node_put(native_mode) before cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
EFI/CPER: don't go past the ARM processor CPER record buffer
There's a logic inside GHES/CPER to detect if the section_length
is too small, but it doesn't detect if it is too big.
Currently, if the firmware receives an ARM processor CPER record
stating that a section length is big, kernel will blindly trust
section_length, producing a very long dump. For instance, a 67
bytes record with ERR_INFO_NUM set 46198 and section length
set to 854918320 would dump a lot of data going a way past the
firmware memory-mapped area.
Fix it by adding a logic to prevent it to go past the buffer
if ERR_INFO_NUM is too big, making it report instead:
[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
[Hardware Error]: event severity: recoverable
[Hardware Error]: Error 0, type: recoverable
[Hardware Error]: section_type: ARM processor error
[Hardware Error]: MIDR: 0xff304b2f8476870a
[Hardware Error]: section length: 854918320, CPER size: 67
[Hardware Error]: section length is too big
[Hardware Error]: firmware-generated error record is incorrect
[Hardware Error]: ERR_INFO_NUM is 46198
[ rjw: Subject and changelog tweaks ] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: fix potential zero beacon interval in beacon tracking
During fuzz testing, it was discovered that bss_conf->beacon_int
might be zero, which could result in a division by zero error in
subsequent calculations. Set a default value of 100 TU if the
interval is zero to ensure stability. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: pretend special inodes as regular files
Since commit af153bb63a33 ("vfs: catch invalid modes in may_open()")
requires any inode be one of S_IFDIR/S_IFLNK/S_IFREG/S_IFCHR/S_IFBLK/
S_IFIFO/S_IFSOCK type, use S_IFREG for special inodes. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Fix double destroy_workqueue on service rescan PCI path
While testing corner cases in the driver, a use-after-free crash
was found on the service rescan PCI path.
When mana_serv_reset() calls mana_gd_suspend(), mana_gd_cleanup()
destroys gc->service_wq. If the subsequent mana_gd_resume() fails
with -ETIMEDOUT or -EPROTO, the code falls through to
mana_serv_rescan() which triggers pci_stop_and_remove_bus_device().
This invokes the PCI .remove callback (mana_gd_remove), which calls
mana_gd_cleanup() a second time, attempting to destroy the already-
freed workqueue. Fix this by NULL-checking gc->service_wq in
mana_gd_cleanup() and setting it to NULL after destruction.
Call stack of issue for reference:
[Sat Feb 21 18:53:48 2026] Call Trace:
[Sat Feb 21 18:53:48 2026] <TASK>
[Sat Feb 21 18:53:48 2026] mana_gd_cleanup+0x33/0x70 [mana]
[Sat Feb 21 18:53:48 2026] mana_gd_remove+0x3a/0xc0 [mana]
[Sat Feb 21 18:53:48 2026] pci_device_remove+0x41/0xb0
[Sat Feb 21 18:53:48 2026] device_remove+0x46/0x70
[Sat Feb 21 18:53:48 2026] device_release_driver_internal+0x1e3/0x250
[Sat Feb 21 18:53:48 2026] device_release_driver+0x12/0x20
[Sat Feb 21 18:53:48 2026] pci_stop_bus_device+0x6a/0x90
[Sat Feb 21 18:53:48 2026] pci_stop_and_remove_bus_device+0x13/0x30
[Sat Feb 21 18:53:48 2026] mana_do_service+0x180/0x290 [mana]
[Sat Feb 21 18:53:48 2026] mana_serv_func+0x24/0x50 [mana]
[Sat Feb 21 18:53:48 2026] process_one_work+0x190/0x3d0
[Sat Feb 21 18:53:48 2026] worker_thread+0x16e/0x2e0
[Sat Feb 21 18:53:48 2026] kthread+0xf7/0x130
[Sat Feb 21 18:53:48 2026] ? __pfx_worker_thread+0x10/0x10
[Sat Feb 21 18:53:48 2026] ? __pfx_kthread+0x10/0x10
[Sat Feb 21 18:53:48 2026] ret_from_fork+0x269/0x350
[Sat Feb 21 18:53:48 2026] ? __pfx_kthread+0x10/0x10
[Sat Feb 21 18:53:48 2026] ret_from_fork_asm+0x1a/0x30
[Sat Feb 21 18:53:48 2026] </TASK> |
| Redis is an in-memory data structure store. In all versions of redis-server with Lua scripting, an authenticated attacker can exploit the master-replica synchronization mechanism to trigger a use-after-free on replicas where replica-read-only is disabled or can be disabled, which may lead to remote code execution. A workaround is to prevent users from executing Lua scripts or avoid using replicas where replica-read-only is disabled. This is patched in version 8.6.3. |
| A server-side request forgery (ssrf) vulnerability [CWE-918] vulnerability in Fortinet FortiSOAR PaaS 7.6.4, FortiSOAR PaaS 7.6.0 through 7.6.2, FortiSOAR PaaS 7.5.0 through 7.5.2, FortiSOAR PaaS 7.4 all versions, FortiSOAR PaaS 7.3 all versions, FortiSOAR on-premise 7.6.4, FortiSOAR on-premise 7.6.0 through 7.6.2, FortiSOAR on-premise 7.5.0 through 7.5.2, FortiSOAR on-premise 7.4 all versions, FortiSOAR on-premise 7.3 all versions may allow an authenticated attacker to discover services running on local ports via crafted requests. |
| A cleartext transmission of sensitive information vulnerability in Fortinet FortiSOAR PaaS 7.6.0 through 7.6.3, FortiSOAR PaaS 7.5.0 through 7.5.2, FortiSOAR PaaS 7.4 all versions, FortiSOAR PaaS 7.3 all versions, FortiSOAR on-premise 7.6.0 through 7.6.2, FortiSOAR on-premise 7.5.0 through 7.5.1, FortiSOAR on-premise 7.4 all versions, FortiSOAR on-premise 7.3 all versions may allow an authenticated attacker to view cleartext password in response for Secure Message Exchange and Radius queries, if configured |
| An improper neutralization of input during web page generation ('cross-site scripting') vulnerability in Fortinet FortiSOAR PaaS 7.6.0 through 7.6.3, FortiSOAR PaaS 7.5.0 through 7.5.2, FortiSOAR PaaS 7.4 all versions, FortiSOAR PaaS 7.3 all versions, FortiSOAR on-premise 7.6.0 through 7.6.3, FortiSOAR on-premise 7.5.0 through 7.5.2, FortiSOAR on-premise 7.4 all versions, FortiSOAR on-premise 7.3 all versions may allow an authenticated remote attacker to perform a stored cross site scripting (XSS) attack via crafted HTTP Requests. |
| In the Linux kernel, the following vulnerability has been resolved:
APEI/GHES: ensure that won't go past CPER allocated record
The logic at ghes_new() prevents allocating too large records, by
checking if they're bigger than GHES_ESTATUS_MAX_SIZE (currently, 64KB).
Yet, the allocation is done with the actual number of pages from the
CPER bios table location, which can be smaller.
Yet, a bad firmware could send data with a different size, which might
be bigger than the allocated memory, causing an OOPS:
Unable to handle kernel paging request at virtual address fff00000f9b40000
Mem abort info:
ESR = 0x0000000096000007
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x07: level 3 translation fault
Data abort info:
ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
swapper pgtable: 4k pages, 52-bit VAs, pgdp=000000008ba16000
[fff00000f9b40000] pgd=180000013ffff403, p4d=180000013fffe403, pud=180000013f85b403, pmd=180000013f68d403, pte=0000000000000000
Internal error: Oops: 0000000096000007 [#1] SMP
Modules linked in:
CPU: 0 UID: 0 PID: 303 Comm: kworker/0:1 Not tainted 6.19.0-rc1-00002-gda407d200220 #34 PREEMPT
Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 02/02/2022
Workqueue: kacpi_notify acpi_os_execute_deferred
pstate: 214020c5 (nzCv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : hex_dump_to_buffer+0x30c/0x4a0
lr : hex_dump_to_buffer+0x328/0x4a0
sp : ffff800080e13880
x29: ffff800080e13880 x28: ffffac9aba86f6a8 x27: 0000000000000083
x26: fff00000f9b3fffc x25: 0000000000000004 x24: 0000000000000004
x23: ffff800080e13905 x22: 0000000000000010 x21: 0000000000000083
x20: 0000000000000001 x19: 0000000000000008 x18: 0000000000000010
x17: 0000000000000001 x16: 00000007c7f20fec x15: 0000000000000020
x14: 0000000000000008 x13: 0000000000081020 x12: 0000000000000008
x11: ffff800080e13905 x10: ffff800080e13988 x9 : 0000000000000000
x8 : 0000000000000000 x7 : 0000000000000001 x6 : 0000000000000020
x5 : 0000000000000030 x4 : 00000000fffffffe x3 : 0000000000000000
x2 : ffffac9aba78c1c8 x1 : ffffac9aba76d0a8 x0 : 0000000000000008
Call trace:
hex_dump_to_buffer+0x30c/0x4a0 (P)
print_hex_dump+0xac/0x170
cper_estatus_print_section+0x90c/0x968
cper_estatus_print+0xf0/0x158
__ghes_print_estatus+0xa0/0x148
ghes_proc+0x1bc/0x220
ghes_notify_hed+0x5c/0xb8
notifier_call_chain+0x78/0x148
blocking_notifier_call_chain+0x4c/0x80
acpi_hed_notify+0x28/0x40
acpi_ev_notify_dispatch+0x50/0x80
acpi_os_execute_deferred+0x24/0x48
process_one_work+0x15c/0x3b0
worker_thread+0x2d0/0x400
kthread+0x148/0x228
ret_from_fork+0x10/0x20
Code: 6b14033f 540001ad a94707e2 f100029f (b8747b44)
---[ end trace 0000000000000000 ]---
Prevent that by taking the actual allocated are into account when
checking for CPER length.
[ rjw: Subject tweaks ] |
