| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Out-of-bounds Read vulnerability exists within the parsing of PRJ files. The issues result from the lack of proper validation of user-supplied data, which can result in different memory corruption issues within the application, such as reading and writing past the end of allocated data structures. |
| A vulnerability has been identified in APOGEE PXC Series (BACnet) (All versions), APOGEE PXC Series (P2 Ethernet) (All versions), TALON TC Series (BACnet) (All versions). Affected devices contain an out-of-bounds read in the memory dump function.
This could allow an attacker with Medium (MED) or higher privileges to cause the device to enter an insecure cold start state. |
| An XML External Entity (XXE) injection vulnerability in Intersec Geosafe-ea 2022.12, 2022.13, and 2022.14 allows attackers to perform arbitrary file reading under the privileges of the running process, make SSRF requests, or cause a Denial of Service (DoS) via unspecified vectors. |
| ESF-IDF is the Espressif Internet of Things (IOT) Development Framework. In versions 5.5.1, 5.4.3, and 5.3.4, when the ESP32-P4 uses its hardware JPEG decoder, the software parser lacks necessary validation checks. A specially crafted (malicious) JPEG image could exploit the parsing routine and trigger an out-of-bounds array access. This issue has been fixed in versions 5.5.2, 5.4.4, and 5.3.5. At time of publication versions 5.5.2, 5.4.4, and 5.3.5 have not been released but are fixed respectively in commits 4b8f585, c79cb4d, and 34e2726. |
| In a
Silicon Labs multi-protocol gateway, a corrupt pointer to buffered data on a multi-protocol radio co-processor (RCP) causes the OpenThread Border Router(OTBR) application task running on the host platform to crash, allowing an attacker to cause a temporary denial-of-service. |
| The vulnerability occurs in the parsing of CSP files. The issues result
from the lack of proper validation of user-supplied data, which could
allow reading past the end of allocated data structures, resulting in
execution of arbitrary code. |
| An out-of-bounds read vulnerability has been identified in the Postscript interpreter in various Lexmark devices. This vulnerability can be leveraged by an attacker to execute arbitrary code as an unprivileged user. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix out of bounds memory read error in symlink repair
xfs/286 produced this report on my test fleet:
==================================================================
BUG: KFENCE: out-of-bounds read in memcpy_orig+0x54/0x110
Out-of-bounds read at 0xffff88843fe9e038 (184B right of kfence-#184):
memcpy_orig+0x54/0x110
xrep_symlink_salvage_inline+0xb3/0xf0 [xfs]
xrep_symlink_salvage+0x100/0x110 [xfs]
xrep_symlink+0x2e/0x80 [xfs]
xrep_attempt+0x61/0x1f0 [xfs]
xfs_scrub_metadata+0x34f/0x5c0 [xfs]
xfs_ioc_scrubv_metadata+0x387/0x560 [xfs]
xfs_file_ioctl+0xe23/0x10e0 [xfs]
__x64_sys_ioctl+0x76/0xc0
do_syscall_64+0x4e/0x1e0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
kfence-#184: 0xffff88843fe9df80-0xffff88843fe9dfea, size=107, cache=kmalloc-128
allocated by task 3470 on cpu 1 at 263329.131592s (192823.508886s ago):
xfs_init_local_fork+0x79/0xe0 [xfs]
xfs_iformat_local+0xa4/0x170 [xfs]
xfs_iformat_data_fork+0x148/0x180 [xfs]
xfs_inode_from_disk+0x2cd/0x480 [xfs]
xfs_iget+0x450/0xd60 [xfs]
xfs_bulkstat_one_int+0x6b/0x510 [xfs]
xfs_bulkstat_iwalk+0x1e/0x30 [xfs]
xfs_iwalk_ag_recs+0xdf/0x150 [xfs]
xfs_iwalk_run_callbacks+0xb9/0x190 [xfs]
xfs_iwalk_ag+0x1dc/0x2f0 [xfs]
xfs_iwalk_args.constprop.0+0x6a/0x120 [xfs]
xfs_iwalk+0xa4/0xd0 [xfs]
xfs_bulkstat+0xfa/0x170 [xfs]
xfs_ioc_fsbulkstat.isra.0+0x13a/0x230 [xfs]
xfs_file_ioctl+0xbf2/0x10e0 [xfs]
__x64_sys_ioctl+0x76/0xc0
do_syscall_64+0x4e/0x1e0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
CPU: 1 UID: 0 PID: 1300113 Comm: xfs_scrub Not tainted 6.18.0-rc4-djwx #rc4 PREEMPT(lazy) 3d744dd94e92690f00a04398d2bd8631dcef1954
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-4.module+el8.8.0+21164+ed375313 04/01/2014
==================================================================
On further analysis, I realized that the second parameter to min() is
not correct. xfs_ifork::if_bytes is the size of the xfs_ifork::if_data
buffer. if_bytes can be smaller than the data fork size because:
(a) the forkoff code tries to keep the data area as large as possible
(b) for symbolic links, if_bytes is the ondisk file size + 1
(c) forkoff is always a multiple of 8.
Case in point: for a single-byte symlink target, forkoff will be
8 but the buffer will only be 2 bytes long.
In other words, the logic here is wrong and we walk off the end of the
incore buffer. Fix that. |
| Out-of-bounds read in the firmware for some Intel(R) Converged Security and Management Engine (CSME) Firmware (FW) within Ring 0: Kernel may allow an information disclosure. System software adversary with a privileged user combined with a low complexity attack may enable data exposure. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| An out-of-bounds read in the ASP could allow a privileged attacker with access to a malicious bootloader to potentially read sensitive memory resulting in loss of confidentiality. |
| Out-of-bounds memory operations in org.lz4:lz4-java 1.8.0 and earlier allow remote attackers to cause denial of service and read adjacent memory via untrusted compressed input. |
| There is an Out-of-bounds read vulnerability in V-Server (v4.0.19.0 and earlier) and V-Server Lite (v4.0.19.0 and earlier). If a user opens a specially crafted file, information may be disclosed and/or arbitrary code may be executed. |
| Out-of-bounds read for some TDX before version tdx module 1.5.24 within Ring 0: Hypervisor may allow an information disclosure. Authorized adversary with a privileged user combined with a low complexity attack may enable data exposure. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Out-of-bounds read in Intel(R) Media SDK and some Intel(R) oneVPL software before version 23.3.5 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| The TCP protocol in RFC 9293 has a timing side channel that makes it easier for remote attackers to infer the content of one TCP connection from a client system (to any server), when that client system is concurrently obtaining TCP data at a slow rate from an attacker-controlled server, aka the "SnailLoad" issue. For example, the attack can begin by measuring RTTs via the TCP segments whose role is to provide an ACK control bit and an Acknowledgment Number. |
| QLowEnergyController in Qt before 6.8.2 mishandles malformed Bluetooth ATT commands, leading to an out-of-bounds read (or division by zero). This is fixed in 5.15.19, 6.5.9, and 6.8.2. |
| Horner Automation Cscape contains a memory corruption vulnerability, which
could allow an attacker to disclose information and execute arbitrary
code. |
| Memory corruptions can be remotely triggered in the Control-M/Agent when SSL/TLS communication is configured.
The issue occurs in the following cases:
* Control-M/Agent 9.0.20: SSL/TLS configuration is set to the non-default setting "use_openssl=n";
* Control-M/Agent 9.0.21 and 9.0.22: Agent router configuration uses the non-default settings "JAVA_AR=N" and "use_openssl=n" |
| Out-of-bounds read vulnerabilities in print processing of Generic Plus PCL6 Printer Driver / Generic Plus UFR II Printer Driver / Generic Plus LIPS4 Printer Driver / Generic Plus LIPSLX Printer Driver / Generic Plus PS Printer Driver / UFRII LT Printer Driver / CARPS2 Printer Driver / Generic FAX Driver / LIPS4 Printer Driver / LIPSLX Printer Driver / UFR II Printer Driver / PS Printer Driver / PCL6 Printer Driver |
| Insecure permissions in volcano v1.8.2 allows attackers to access sensitive data and escalate privileges by obtaining the service account's token. |
