| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Validate MSI data before routing it to EIOINTC
pch_msi_set_irq() passes e->msi.data straight into eiointc_set_irq() as
the irq number. The MSI data comes from userspace, that either via a
KVM_IRQ_ROUTING_MSI entry set with KVM_SET_GSI_ROUTING (used by irqfd
and KVM_IRQ_LINE) or directly via KVM_SIGNAL_MSI, and is never checked
against EIOINTC_IRQS.
eiointc_set_irq() uses the value with __set_bit()/__clear_bit() on the
256-bit isr bitmap, eiointc_update_irq() then indexes sw_coremap[] and
the per-cpu coreisr/sw_coreisr bitmaps with it. Therefore a data value
>= 256 reads and writes memory past the end of those arrays, i.e. any
process holding a VM fd can corrupt kernel memory beyond the allocation
of loongarch_eiointc.
Reject MSI data that doesn't fit in the EIOINTC irq space. The DMSINTC
path is unaffected as it decodes the vector from the address and masks
it. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Fix uninitialized stack variable issue with dmsintc
Variable vector[] is declared on stack in function dmsintc_inject_irq()
and sometimes it is used without initialized. Here fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix memory corruption by not reinjecting CK machine checks
Channel-subsystem damage machine checks are for the host channel
subsystem. The guest channel subsystem is emulated in the userspace VMM.
There is no point in forwarding such machine checks into the guest.
This also simplifies the machine check reinjection and avoids kfree of a
stack variable as reported by sashiko. There might be still machine
checks that have the ck bit set with another bit (like instruction
damage), mask out the CK bit in s390_backup_mcck_info(), like the CP and
ED bits already are. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: hyper-v: Clamp stimer deadline to avoid livelock
Fix an issue where userspace or the guest can program an Hyper-V
synthetic timer to have a deadline in the past via integer overflow,
preventing the CPU from making progress and triggering an RCU stall.
Hyper-V's SynIC exposes 4 per-vCPU synthetic timers to the
guest, which are emulated by KVM. Each is programmed through the
HV_X64_MSR_STIMERi_CONFIG and HV_X64_MSR_STIMERi_COUNT MSRs. Depending
on CONFIG, COUNT represents either the absolute expiration time or the
period of a periodic timer, both expressed in 100ns ticks. These timers
may be set both by the guest (WRMSR) and the host (KVM_SET_MSRS).
When the timer is enabled, stimer_start() translates COUNT to an
absolute monotonic deadline and arms an hrtimer. If COUNT is set to a
value close to U64_MAX, the deadline calculation can overflow.
ktime_add_ns(ktime_now, 100 * (stimer->exp_time - time_now))
This can result in a CPU livelock. stimer_start() arms the timer
via hrtimer_start() with a deadline in the past, which causes it to
immediately fire. The stimer callback then raises KVM_RQ_HV_STIMER, with
the intention of causing KVM to deliver a synthetic interrupt on the
next vCPU guest enter.
Then, once userspace issues KVM_RUN, vcpu_enter_guest() consumes the
request, calling kvm_hv_process_stimers(). This would normally disable
the timer via stimer_expiration() once the deadline is in the past.
However, the deadline comparison is done between the KVM reference
counter and stime->exp_time, which is a big value close to U64_MAX, so
this never happens for a few thousand years.
kvm_hv_process_timers() then re-arms the timer via stimer_start(), since
it was not disabled, which again fires immediately. Before entering
the guest, kvm_vcpu_exit_request() checks kvm_request_pending(),
which returns true due to the newly raised KVM_REQ_HV_STIMER. Then
vcpu_enter_guest() aborts the guest entry, returning early into
vcpu_run(), which loops back again into vcpu_enter_guest(), restarting
the cycle.
Since there are no manual yields in this loop, a task with SCHED_FIFO
may starve RCU grace-period kthreads, which exposes the stalls found
by syzcaller:
rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu: (detected by 1, t=10502 jiffies, g=14269, q=1142 ncpus=2)
rcu: All QSes seen, last rcu_preempt kthread activity 10500 (4294965239-4294954739), jiffies_till_next_fqs=1, root ->qsmask 0x0
rcu: rcu_preempt kthread starved for 10500 jiffies! g14269 f0x2 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=0
rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior.
( ... )
Call Trace:
<IRQ>
__run_hrtimer kernel/time/hrtimer.c:1773 [inline]
__hrtimer_run_queues+0x408/0xc30 kernel/time/hrtimer.c:1841
hrtimer_interrupt+0x45b/0xaa0 kernel/time/hrtimer.c:1903
local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1045 [inline]
__sysvec_apic_timer_interrupt+0x102/0x3e0 arch/x86/kernel/apic/apic.c:1062
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1056 [inline]
sysvec_apic_timer_interrupt+0xa1/0xc0 arch/x86/kernel/apic/apic.c:1056
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:697
RIP: 0010:__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:152 [inline]
RIP: 0010:_raw_spin_unlock_irqrestore+0xa8/0x110 kernel/locking/spinlock.c:194
Code: 74 05 e8 0b f4 5f f6 48 c7 44 24 20 00 00 00 00 9c 8f 44 24 20 f6 44 24 21 02 75 4f f7 c3 00 02 00 00 74 01 fb bf 01 00 00 00 <e8> 23 6b 27 f6 65 8b 05 7c 60 5a 07 85 c0 74 40 48 c7 04 24 0e 36
RSP: 0018:ffffc900040a7320 EFLAGS: 00000206
RAX: 5de15cb931505900 RBX: 0000000000000a06 RCX: 5de15cb931505900
RDX: 0000000000000007 RSI: ffffffff8daa9dc3 RDI: 0000000000000001
RBP: ffffc900040a73b0 R08: ffffffff8fc3d0
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Consume the locked rmap value in the lockless rmap walk
__kvm_rmap_lock() deliberately elides the rmap lock when it observes an
empty rmap. In that case kvm_rmap_lock_readonly() also re-enables
preemption and returns zero, so the caller holds neither the rmap lock
nor a preemption reference. The elision documents the invariant it
relies on:
* Elide the lock if the rmap is empty, as lockless walkers (read-only
* mode) don't need to (and can't) walk an empty rmap, nor can they add
* entries to the rmap. I.e. the only paths that process empty rmaps
* do so while holding mmu_lock for write, and are mutually exclusive.
kvm_rmap_age_gfn_range() ignores the returned value and unconditionally
enters for_each_rmap_spte_lockless(). The iterator started with
rmap_get_first(), which re-reads rmap_head->val rather than using the
value returned by the lock. If a writer populates the rmap between the
lock's read and the iterator's re-read, the aging path walks the newly
installed rmap without holding its lock.
For a KVM_RMAP_MANY rmap this leaves the walker following a
pte_list_desc chain that it never locked. A writer holding mmu_lock for
write may free that chain (e.g. kvm_zap_all_rmap_sptes() on the recycle
path, or any rmap zap) via kmem_cache_free() while the walk is in
progress, giving a slab use-after-free. Nothing serialises the two: the
aging path runs without mmu_lock when CONFIG_KVM_MMU_LOCKLESS_AGING=y,
and the rmap lock that would otherwise exclude the writer was elided.
Because the empty path re-enables preemption, the interval between the
two reads can span an arbitrary scheduling delay.
Fix the class of bug by having the lockless walk consume the value
returned by the lock instead of re-reading the rmap. Split
rmap_get_first() into __rmap_get_first(), which starts an iterator from
an already-read rmap value, and make for_each_rmap_spte_lockless() take
that value and call __rmap_get_first() directly.
kvm_rmap_age_gfn_range() passes the value returned by
kvm_rmap_lock_readonly(): when the lock was elided the value is zero,
__rmap_get_first() returns NULL, and the walk is skipped. No lockless
walker re-reads the rmap, so the lock-elision invariant cannot be
violated, and no lock()-without-paired-unlock() path is added to the
aging code. |
| djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. Prior to version 1.0.7, the SSE client→server POST endpoints are `@csrf_exempt` and the SSE GET stream endpoint had no Origin check, so a cross-origin page could drive a victim-cookie-authenticated SSE session: force the victim's browser to GET the stream URL (which creates and mounts a LiveView as the victim) and POST to the message endpoint with `credentials: include` to fire state-changing event handlers as the victim. The URL `session_id` is client-chosen (validated only for UUID *format*), so it is not a CSRF token, and a JSON body sent as `text/plain` is a CORS simple request with no preflight. The issue is fixed in 1.0.7. All three SSE endpoints validate the request `Origin` against `ALLOWED_HOSTS` (mirroring the WebSocket CSWSH defense) and reject cross-origin requests with 403; the POST endpoints additionally require `Content-Type: application/json` (415 otherwise), closing the `text/plain` simple-request bypass. As a workaround, disable the SSE transport, or front it with a proxy that enforces an Origin allowlist. |
| Nango through 0.70.4 fails to validate caller-supplied connection configuration values interpolated into provider token and proxy URL templates. Authenticated attackers can supply malicious configuration values to direct server requests at internal addresses or cloud metadata endpoints, potentially exfiltrating provider credentials. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF
The atlas driver requests its hardware data-ready IRQ with
devm_request_threaded_irq(); its threaded handler queues an irq_work,
atlas_work_handler(), that calls iio_trigger_poll(data->trig).
The IRQ is devm-managed, so free_irq() runs from the devres unwind after
atlas_remove() returns without flushing that irq_work. Once a buffer is
enabled, conversion-complete IRQs keep firing and queueing it; a pending
irq_work can therefore run after the unwind has freed atlas_data/indio_dev
and the trigger, when atlas_work_handler() derives the atlas_data pointer
via container_of() and dereferences data->trig, a use-after-free.
Call iio_trigger_poll_nested() directly from the threaded handler instead
of bouncing through irq_work. free_irq() then drains the threaded handler,
closing the window; other iio drivers with a threaded data-ready IRQ do the
same (e.g. bmi270).
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: Fix potential use-after-free in anonymous buffer release
An anonymous buffer handle holds a reference to the underlying IIO device.
The reference is dropped in the buffer handle's release function. If the
device has been removed, either through unbind or hot-unplug, the buffer
handle might hold the last reference.
The release function takes the mutex for the buffer using a guard, which
means the unlock happens after all the code in the function, including
`iio_device_put()`. If the anonymous buffer holds the last reference this
might free both the IIO device and the buffer, which contains the mutex,
leading to use-after-free when the mutex is unlocked.
Fix this by using a scoped guard just around the buffer dmabuf list access,
making sure the mutex is unlocked before releasing the IIO device.
Version 10 of the patch that introduced this issue used this exact scheme
of first unlocking and then dropping the reference [1]. During review it
was suggested to use a guard instead, and version 11 made that change [2]. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: meson: align gxbb_32k_clk_sel number of parents with actual count
The following out-of-bounds read has been observed by Christian on a
GXBB WeTek Hub:
==================================================================
BUG: KASAN: global-out-of-bounds in __clk_register+0x1b70/0x2418
Read of size 8 at addr ffffd66320cf88e0 by task swapper/0/1
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 7.0.0-rc5 #1 PREEMPT
Hardware name: WeTek Hub (DT)
Call trace:
show_stack+0x14/0x20 (C)
dump_stack_lvl+0x74/0x94
print_report+0x164/0x4b0
kasan_report+0x98/0xd8
__asan_report_load8_noabort+0x1c/0x24
__clk_register+0x1b70/0x2418
devm_clk_hw_register+0x74/0x15c
meson_clkc_init+0xd4/0x20c
meson_clkc_syscon_probe+0x5c/0x94
platform_probe+0xbc/0x17c
really_probe+0x184/0x844
__driver_probe_device+0x154/0x35c
driver_probe_device+0x60/0x188
__driver_attach+0x168/0x4a0
bus_for_each_dev+0xec/0x180
driver_attach+0x38/0x58
bus_add_driver+0x238/0x4c0
driver_register+0x150/0x388
__platform_driver_register+0x54/0x7c
gxbb_clkc_driver_init+0x18/0x20
do_one_initcall+0xb8/0x340
kernel_init_freeable+0x49c/0x52c
kernel_init+0x24/0x148
ret_from_fork+0x10/0x20
The buggy address belongs to the variable:
gxbb_32k_clk_parents+0x60/0x400
The buggy address belongs to a vmalloc virtual mapping
The buggy address belongs to the physical page:
Memory state around the buggy address:
ffffd66320cf8780: 00 00 00 00 f9 f9 f9 f9 00 f9 f9 f9 f9 f9 f9 f9
ffffd66320cf8800: 00 04 f9 f9 f9 f9 f9 f9 00 04 f9 f9 f9 f9 f9 f9
>ffffd66320cf8880: 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9 f9 f9
^
ffffd66320cf8900: 00 01 f9 f9 f9 f9 f9 f9 00 06 f9 f9 f9 f9 f9 f9
ffffd66320cf8980: 00 00 02 f9 f9 f9 f9 f9 00 00 02 f9 f9 f9 f9 f9
==================================================================
Commit 7915d7d5407c ("clk: amlogic: gxbb: drop non existing 32k clock
parent") dropped a non-existing clock parent from the gxbb_32k_clk_sel
mux but didn't adjust the hard-coded num_parents field. Fix the actual
number of parents of that mux by using ARRAY_SIZE instead (avoiding
similar problems in future). |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: fix stale receive device on merged fragments
Fragment reassembly reuses the skb from the highest-numbered buffered
fragment as the merged packet. When that fragment was received on a hard
interface which is deleted before the chain completes, the merged skb can
re-enter the receive path with a stale skb->dev and skb_iif.
batadv_batman_skb_recv() passes such merged packets through the normal
receive handlers again. DAT and bridge loop avoidance both derive the ARP
header length from skb->dev, so they can dereference the freed net_device
before the packet reaches the local mesh interface.
Refresh the receive device metadata from the current receive device before
running the packet handlers. This keeps internally reinjected merged
fragments consistent with the normal receive path after hard interface
teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Take trace_array reference before accessing its ftrace_ops
The trace instance files set_ftrace_filter and set_ftrace_notrace was
updated to work with specific trace instances (trace_arrays). The issue is
that when these files are opened, there is a small race window where it
will use the ftrace_ops from the inode->private pointer to get a reference
to the trace_array and then take its reference. The problem is that the
ftrace_ops itself could be freed. If the rmdir on the instance happens at
the same time the set_ftrace_filter file is opened, the rmdir could have
also freed the ftrace_ops and referencing it will cause a use-after-free
bug and crash the kernel.
Instead, pass in the trace_array as the file private data (NULL for the
top level instance), and then pass both the trace_array and the ftrace_ops
to the ftrace_regex_open() function. If the trace_array is NULL, then it
just uses the ftrace_ops without the need to take its reference (like
normal). If the ftrace_ops is NULL, that is only the case for the top
level instance and the global_ops can be used.
This allows the trace_array to have its reference incremented before
touching the ftrace_ops that could also be freed when the instance is. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Prevent rcuwait use-after-free during requeue PI
On PREEMPT_RT, FUTEX_CMP_REQUEUE_PI can trigger a KASAN report
(slab-out-of-bounds) in futex_requeue_pi_complete() invocation of
rcuwait_wake_up().
The futex_q used by futex_wait_requeue_pi() is allocated on the waiter's
stack. An early wakeup can race with a PI requeue as follows:
waiter requeue task
------ ------------
futex_wait_requeue_pi()
futex_do_wait()
schedule()
futex_requeue
futex_proxy_trylock_atomic()
futex_requeue_pi_prepare()
Q_REQUEUE_PI_NONE -> Q_REQUEUE_PI_IN_PROGRESS
* timeout/ signal wakes waiter *
futex_requeue_pi_wakeup_sync()
Q_REQUEUE_PI_IN_PROGRESS -> Q_REQUEUE_PI_WAIT
requeue_pi_wake_futex
futex_requeue_pi_complete()
cmpxchg Q_REQUEUE_PI_WAIT -> Q_REQUEUE_PI_LOCKED
rcuwait_wait_event()
if (atomic_read(&q->requeue_state) != Q_REQUEUE_PI_WAIT)
break /* no schedule() */
/* q.pi_state->owner == current */
futex_private_hash_put()
/* return from syscall */
rcuwait_wake_up(&q->requeue_wait)
/* q is gone */
futex_requeue_pi_complete() publishes Q_REQUEUE_PI_LOCKED before
calling rcuwait_wake_up(). The waiter observes this state in
rcuwait_wait_event() before invoking schedule() in rcuwait_wait_event().
Here, the waiter is free leave the syscall before requeue task can
complete the wake.
To address this race skip rcuwait_wake_up() in the Q_REQUEUE_PI_LOCKED
case.
This state is only published by requeue_pi_wake_futex(), which saves
q->task before futex_requeue_pi_complete() and wakes the waiter via
wake_up_state().
This wake is intended to wake the waiter from its futex_do_wait() sleep.
If the waiter is still sleeping there, it can not get into the
Q_REQUEUE_PI_WAIT state (and require this removed wake).
Should the waiter be woken up from futex_do_wait() by other means (as in
this example) and sleep in futex_requeue_pi_wakeup_sync() then the
wake_up_state() from requeue_pi_wake_futex() will wake it, too.
Should the waiter task terminate before wake_up_state() had a chance to
wake the task then the task pointer does not become invalid because the
futex_hash_bucket::lock is held and the task pointer is RCU protected.
[bigeasy: Updated comment and commit message] |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: bsg: Fix TOCTOU in io_uring passthrough command setup
scsi_bsg_uring_cmd() reads bsg_uring_cmd from the shared mmap'd SQE.
Userspace can change a field after we check it and before we use it.
request_len is the sharp case: it can grow past sizeof(scmd->cmnd) after
the bound check and overflow scmd->cmnd in copy_from_user().
READ_ONCE() the SQE fields we check or use into locals before use. |
| SigNoz versions 0.88.0 through 0.141.0 fail to apply authorization wrappers to trace-funnel analytics endpoints in the HTTP handler. Unauthenticated attackers can submit arbitrary funnel definitions to retrieve trace analytics including identifiers, durations, span counts, service topology, and error activity without credentials. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: Fix control domain removal in vfio_ap_mdev_cfg_remove
The vfio_ap_config_remove function uses the bitmap_andnot function to clear
bits from the matrix_mdev->matrix.adm bitmap (specifies the control domains
assigned to the mdev). This prevents the explicitly unplugged control
domains from being removed the KVM guest. The bitmap_and function is used
instead. |
| In the Linux kernel, the following vulnerability has been resolved:
nvdimm/btt: reject an arena whose nfree is below the lane count
The BTT info block's nfree field, the number of reserve free blocks, is
read from the medium without validation. btt_freelist_init() and
btt_rtt_init() size the per-lane freelist[] and rtt[] arrays by nfree,
but the I/O path indexes them by the lane from nd_region_acquire_lane(),
which is bounded by nd_region->num_lanes (ND_MAX_LANES), not by nfree.
A crafted or foreign arena whose nfree is below the lane count makes
freelist[lane]/rtt[lane] run past the allocation: an out-of-bounds write.
btt.rst documents the nlanes = min(nfree, num_cpus) invariant, which the
code does not currently honor: num_lanes is ND_MAX_LANES regardless of
nfree. Reject an arena whose nfree is below num_lanes at discovery,
before the per-lane arrays are allocated, enforcing that invariant. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/migrate_device: avoid out-of-bounds writes for compound folios
migrate_device_range() and migrate_device_pfns() clear the entries
following a compound folio so that the PFN arrays retain their
page-granular representation.
If a compound folio extends beyond the end of the caller-provided range,
the loops clear all following folio entries without limiting them to the
number of slots remaining in the npages-sized array, causing an
out-of-bounds write.
Do not proceed with a compound folio if its page-granular representation
does not fit entirely in the remaining PFN array. If this happens, drop
any reference and lock acquired for the folio, clear the remaining
entries, and stop collecting.
Observed with a KASAN x86 QEMU kernel using the HMM migrate_anon_huge_zero
selftest. Closing /dev/hmm_dmirror0 after migrating an anonymous huge
page to device memory exercises:
dmirror_fops_release()
-> dmirror_device_evict_chunk()
-> migrate_device_range() |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-fc: fix double free of fabrics options when nvme_add_ctrl() fails
nvmf_create_ctrl() owns the fabrics options and frees them whenever
->create_ctrl() returns an error, so a transport must not free them on
its own error paths. nvme-fc tracks this by testing ctrl->ctrl.opts in
nvme_fc_ctrl_free(), which requires nvme_fc_init_ctrl() to clear that
pointer on every error exit.
The coupling is implicit, and commit 1a9e218195a5 ("nvme: split device
add from initialization") broke it by adding a second error exit. When
nvme_add_ctrl() fails, nvme_fc_init_ctrl() jumps to out_put_ctrl:, past
the "ctrl->ctrl.opts = NULL" that only sits on the fail_ctrl: path, so
nvme_fc_ctrl_free() frees the options and nvmf_create_ctrl() frees them
a second time:
BUG: KASAN: slab-use-after-free in nvmf_free_options+0x30/0x190
nvmf_free_options+0x30/0x190 drivers/nvme/host/fabrics.c:1284
nvmf_create_ctrl drivers/nvme/host/fabrics.c:1374 [inline]
Freed by task 5534:
nvme_fc_ctrl_free drivers/nvme/host/fc.c:2374 [inline]
nvme_fc_init_ctrl+0xe17/0x1450 drivers/nvme/host/fc.c:3605
nvme_add_ctrl() fails when dev_set_name() cannot allocate, so this is
reachable under memory pressure or fault injection. Without KASAN the
options are freed twice.
Rather than clear the pointer on the second exit as well, derive
ownership the way nvme-tcp, nvme-rdma and nvme-loop do, from list
membership: their free_ctrl leaves the options alone unless the
controller made it onto the transport list.
The list cannot simply be populated on the success path as it is there.
nvme-fc runs the initial connect synchronously via flush_delayed_work(),
and the controller has to be reachable on rport->ctrl_list for the whole
of it: nvme_fc_unregister_remoteport() needs to find it to signal
connectivity loss, nvme_fc_match_disconn_ls() matches an incoming
Disconnect Association LS against ctrl->association_id, which is only
assigned during that window, nvme_fc_resume_controller() needs it on
remoteport re-registration, and nvme_fc_existing_controller() uses it to
reject a duplicate connect racing the one in flight.
Keep the insertion where it is and add a fail_unlist: label, falling
into fail_ctrl:, for the error paths that run after it. The earlier
error paths never reach the insertion and keep using fail_ctrl:
directly, so the list is only touched where the controller is actually
on it.
nvme_fc_ctrl_free() cannot use the plain "goto free_ctrl" the other
transports use, because it still has to put_device(), release the rport
reference and free the ida entry for resources taken before the
insertion. Sample list_empty() under rport->lock instead.
ctrl->ctrl.opts also stays valid for the whole teardown now. That is
not the bug being fixed, but it removes some fragility around the old
idiom: nvme_free_ctrl() calls nvme_auth_free() before ->free_ctrl(), and
ctrl_max_dhchaps() dereferences ctrl->opts without a NULL check when
ctrl->dhchap_ctxs is set, which nvme-fc permits since NVMF_ALLOWED_OPTS
allows the dhchap options. The nvme sysfs attributes that dereference
ctrl->opts, such as hostnqn and address, evaluate their is_visible()
test once at device_add() time and stay readable until
cdev_device_del(). |
| In the Linux kernel, the following vulnerability has been resolved:
dm: fix race when loading and unloading a table
If the userspace calls two concurrent table load ioctls and one of them
succeeds and the other fails, there is a race condition because
dm_setup_md_queue walks &md->table_devices without any lock. If the walk
races with dm_table_destroy -> free_devices -> dm_put_table_device, there
is access to invalid memory.
Fix this race by extending the lock over the list walk. |
