| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In JetBrains TeamCity before 2026.2.1 stored XSS in recipe export errors was possible |
| In JetBrains TeamCity before 2026.2.1, 2026.1.5 stored XSS on the thread dump page was possible |
| In JetBrains TeamCity before 2026.2.1 improper authorization allowed using AWS connections of other projects in cloud profiles |
| In JetBrains TeamCity before 2026.2.1 stored XSS in the Pull Requests health report for VCS roots was possible |
| In JetBrains TeamCity before 2026.2.1, 2026.1.5 stored and reflected XSS in Space project connection dialogs was possible |
| In JetBrains TeamCity before 2026.2.1, 2026.1.5 stored XSS in the JaCoCo coverage settings was possible |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: TDX: Enable Bus Lock VM exit
Enable Bus Lock VM exit functionality for TDX guests.
Bus Lock VM exit is an existing feature supported by KVM. Userspace can
enable Bus Lock VM exit through KVM_BUS_LOCK_DETECTION_EXIT when it's
reported as supported. However, KVM reports the support of this CAP
just based on the hardware capability but doesn't differentiate between
VMX and TDX. This leads to the issue that userspace can enable this cap
for TDX guests without getting an error, but the feature is not actually
enabled because KVM doesn't call the TDX module API to program the
relevant TD VMCS fields.
Enable Bus Lock VM exit for TDX guests by programming the
BUS_LOCK_DETECTION control in the TD VMCS and by adding the exit handler.
Note, there is no enumeration bit for this feature by TDX module because
all TDX modules support it and allow to set the TD VMCS as long as the
hardware supports the feature. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Take SRCU in kvm_zap_gfn_range()
kvm_zap_gfn_range() walks memslots and rmaps and may drop mmu_lock to
reschedule. Callers that do not already hold kvm->srcu (or slots_lock)
can race with memslot deletion: synchronize_srcu_expedited() does not
wait, kvm_free_memslot() frees the old slot and its rmap, and the zap
resumes on freed memory.
The VFIO noncoherent-DMA path hits this by zapping the entire GPA
space without SRCU. KASAN reported:
BUG: KASAN: vmalloc-out-of-bounds in slot_rmap_walk_next+0x82/0x1c0
Read of size 8 at addr ffffc900005c1008
Call Trace:
slot_rmap_walk_next+0x82/0x1c0
__kvm_rmap_zap_gfn_range+0x17a/0x280
kvm_zap_gfn_range+0x2a6/0x6a0
kvm_vfio_set_attr+0x576/0x770
kvm_device_ioctl+0x1ff/0x3b0
Take SRCU inside kvm_zap_gfn_range() so every caller is covered.
Nesting with an existing kvm->srcu critical section is fine; the
helper uses a local index. Drop the now-redundant SRCU pair from
__kvm_set_or_clear_apicv_inhibit(). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/xen: Enforce 4-byte alignment of vcpu_info registration
Xen's map_guest_area() enforces that vcpu_info is aligned to
sizeof(xen_ulong_t). KVM has no such check, allowing a guest to
register vcpu_info at an arbitrary byte alignment.
Enforce unconditional 4-byte alignment regardless of the current
shinfo mode. This is sufficient because subsequent commits ensure
that all locked atomic operations on vcpu_info fields use at most
32-bit accesses. Return -ENXIO on failure, matching Xen's
map_guest_area() behaviour for unaligned requests.
Originally observed in review of an unrelated patch:
https://lore.kernel.org/all/20260604193554.1BA311F00893@smtp.kernel.org/ |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Ignore EFER.LMA if EFER.LME=0 when preparing L2 state
Force EFER.LMA=0 if EFER.LME=0 when preparing L2 state for VMRUN, i.e.
mimic real hardware's behavior of ignoring EFER.LMA if EFER.LME=0. VMRUN
unfortunately allows the nonsensical combination, i.e. doesn't fail, but
KVM itself has an invariant EFER.LMA can be set et if and only if EFER.LME
is set. Breaking that invariant can lead to a variety of issue,
particularly in MMU code that keys off EFER.LMA when determining whether to
emulate/virtualization 4/5-level paging versus PAE paging. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Trigger new ASID allocation in both VMCBs on pCPU switch
When the pCPU where the VMCB was most recently used is switched, reset
the ASID generation in both VMCBs, triggering new ASID allocation for
the immediate VMRUN as well as the next VMRUN on the other VMCB.
The ASID is shared between vmcb01 and vmcb02, and gets flushed on every
nested transition. However, since pCPU tracking is done per VMCB, it is
possible for one VMCB to allocate a new ASID when migrated to a new
pCPU, and then the other VMCB reuses that ASID on the old pCPU. This can
result in the same ASID being used by multiple vCPUs on the old pCPU.
Example scenario:
- vCPU runs on pCPU A, vmcb01 is active, asid=1.
- vCPU migrates to pCPU B, vmcb01 pCPU changes, new asid=2.
- Another vCPU runs on pCPU A and allocates asid=2 as well.
- vCPU migrates back to pCPU A, and then switches to vmcb02 before it
runs again with vmcb01.
- No pCPU switch is detected for vmcb02, so VMRUN is done with asid=2.
- Two vCPUs end up using asid=2 on the same pCPU.
Keep the VMCB dirtying to the active VMCB only. Clean bits are tracked
by a pCPU for each VMCB, so do not unnecessarily dirty a VMCB if its
pCPU does not change.
Additionally, initialize the tracked pCPU for vmcb02 to -1 on nested
enablement as hardening, so that a new ASID allocation is always
triggered when nested is disabled and re-enabled.
No performance regression was noticed when overcommitting L1 vCPUs in L0
(to force rescheduling), pinning L1 <-> L2 vCPUs, and running CPUID in a
tight loop bouncing between 2 vCPUs in L2.
An alternative (and perhaps more proper) fix would be tracking the ASID
per-VMCB instead (e.g. [1]). However, that's a more involved change, and
it would result in having different ASIDs for L1 and L2 without actually
properly maintaining them. It would probably work because all TLB
flushes target the current VMCB, and the other VMCB is always flushed on
nested transitions, but the code ends up in an arguably more fragile
state. Punt a proper clean fix to an incoming (and overdue) overhaul of
SVM's ASID usage [2].
[1] https://lore.kernel.org/lkml/20250205182402.2147495-2-yosry.ahmed@linux.dev
[2] https://lore.kernel.org/kvm/20260728003557.1136583-1-yosry@kernel.org |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: x86: hdmi: fix chmap array missing terminator entry
had_build_channel_allocation_map() allocates a single struct
snd_pcm_chmap_elem via kzalloc() and stores it as
intelhaddata->chmap->chmap. struct snd_pcm_chmap.chmap is expected to
be a zero-terminated array (see snd_pcm_std_chmaps[]), but
had_register_chmap_ctls() never overrides the TLV callback installed
by snd_pcm_add_chmap_ctls(), so the generic pcm_chmap_ctl_tlv() from
ALSA core is left in place.
pcm_chmap_ctl_tlv() is reachable by any local user via
SNDRV_CTL_IOCTL_TLV_READ on the "Playback Channel Map" control and
walks the array with "for (map = info->chmap; map->channels; map++)".
Since the driver's single element is never terminated, this walks
past the allocation. The same pointer is also freed on hot-unplug and
rebuilt on hot-plug under intelhaddata->mutex, while the TLV callback
runs under card->controls_rwsem without that mutex, so the walk can
also race a concurrent free of the array.
Fix this by allocating a second, zeroed element so the array is
properly terminated, and by dropping the inherited TLV callback
entirely at registration time, since the driver never implements one
of its own. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix lack of short-send handling in rxrpc_kernel_send_data()
Fix rxrpc_kernel_send_data() to loop around if it detects a short send.
David Laight suggested doing it here rather than wrapping all the calls in
loops. Further, remove the len argument and use the iterator count instead
and return 0 on success, not the amount copied.
Note this is also a prerequisite for changing the way rxrpc_send_data()
works to return a short send rather than an error if some data was
buffered. |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: treat empty auth.unix.gid replies as negative entries
When rpc.mountd cannot resolve a uid (getpwuid() or getgrouplist()
failure, e.g. while winbind or sssd is briefly unreachable), it
answers the auth.unix.gid upcall with zero groups. unix_gid_parse()
installs that as a valid positive entry, and svcauth_unix_set_client()
then replaces the credential's group list with the empty one on
every request, RPCSEC_GSS included via svcauth_gss_set_client().
One failed lookup strips that uid of all supplementary groups on
every export for up to mountd's configured TTL (30 minutes by
default), long after the NSS backend has recovered.
mountd cannot send an empty list for a successful lookup, since
getgrouplist(3) always includes at least the user's primary group,
so a zero-group reply can only mean the lookup failed. Record it as
a negative entry: unix_gid_find() then returns -ENOENT and
svcauth_unix_set_client() keeps the groups the RPC credential
already carries. This is the fallback that
commit 3fc605a2aa38 ("[PATCH] knfsd: allow the server to provide a
gid list when using AUTH_UNIX authentication") promised when no
answer is available, and the same state try_to_negate_entry()
already creates when no listener holds the channel open. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: Reject a socket that already has an svc_sock attached
Writing the same socket descriptor to /proc/fs/nfsd/portlist twice
attaches a second svc_sock to one socket. svc_setup_socket() saves
the socket's callbacks before installing its own, so the second
attach records svc_write_space() as the old write_space callback.
svc_udp_init() invokes that callback by way of svc_sock_setbufsize(),
and svc_write_space() then calls itself until the kernel stack is
exhausted:
BUG: TASK stack guard page was hit at ffffc900037d7ff8
svc_write_space+0x90/0x2b0 net/sunrpc/svcsock.c:429
svc_write_space+0xe6/0x2b0 net/sunrpc/svcsock.c:430
... 700 more ...
svc_sock_setbufsize+0x18d/0x220 net/sunrpc/svcsock.c:386
svc_udp_init net/sunrpc/svcsock.c:854 [inline]
svc_setup_socket+0xb2f/0x1090 net/sunrpc/svcsock.c:1498
svc_addsock+0x2fd/0x760 net/sunrpc/svcsock.c:1547
__write_ports_addfd fs/nfsd/nfsctl.c:742 [inline]
write_ports+0xa5b/0xcc0 fs/nfsd/nfsctl.c:861
nfsctl_transaction_write+0x106/0x1a0 fs/nfsd/nfsctl.c:112
svc_data_ready() and svc_tcp_state_change() chain through their saved
callbacks the same way, so a TCP descriptor added twice recurses on
the next incoming segment instead. Reaching any of this takes a
writer on portlist, and the nfsd filesystem sets no FS_USERNS_MOUNT,
so the reproducer needs CAP_SYS_ADMIN in the initial user namespace.
Reject a socket that already carries sk_user_data. svc_setup_socket()
overwrites that field unconditionally, so a socket some other
consumer has claimed is one NFSD would corrupt whether or not the
callbacks recurse. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: fix oversized GSS proxy token copy
gss_read_proxy_verf() allocates one page per token chunk, but it copies the
entire linear head of an RPC request into in_token->pages[0]. A UDP datagram
can leave more than PAGE_SIZE bytes in the linear head, so a large
RPCSEC_GSS INIT token overwrites following pages.
Copy the linear head in page-sized chunks before switching to the request
page array. The linear head itself can span multiple pages. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: Do not credit control-record octets to the RPC stream
svc_tcp_sock_recv_cmsg() receives up to two octets into a local
buffer, and returns that count for any record type other than
TLS_RECORD_TYPE_ALERT. Nothing reached the caller's buffer, but
svc_tcp_read_marker() adds the count to sk_tcplen and
svc_tcp_read_msg()'s caller adds it to sk_datalen. The RPC stream
advances over octets it never received. The fragment marker is
assembled from stale sk_marker octets. The message body comes from
pages nothing wrote.
A conforming client reaches this. RFC 8446 Section 4.6.3 lets either
peer send KeyUpdate once it has sent its Finished, and svcsock has no
rekey path. kTLS leaves the partially consumed record on ctx->rx_list,
so the body drains two octets per svc_tcp_recvfrom() call. Each pair
is credited the same way.
Return -EAGAIN for a record that is not an alert. That is what
svc_tcp_sock_process_cmsg()'s default arm returned before the receive
moved into a local buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: validate transport name in listener_set before serv creation
nfsd_nl_listener_set_doit() holds nfsd_mutex for the whole listener
teardown and rebuild. The code checks NFSD_A_SOCK_TRANSPORT_NAME for
presence only, and not for content. An arbitrary name therefore reaches
svc_xprt_create_from_sa(). There, a name that matches no registered class
calls request_module("svc%s", name). That call is a TASK_KILLABLE usermode
helper upcall, and it runs under nfsd_mutex.
Check the name against the classes that NFSD can create: tcp, udp and
rdma. The check goes in nfsd_nl_validate_listeners(), which runs before
the code takes nfsd_mutex. The rejection names the offending attribute
through extack, since -EPROTONOSUPPORT on its own does not say which
entry carried the bad name.
This narrows the upcall. It does not remove it. NFSD accepts "rdma"
without a condition, so on a kernel that does not build svcrdma the name
still reaches request_module("svcrdma") under nfsd_mutex. That is
necessary for the modular case, where the autoload is legitimate. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Set nn->cld_net before registering the cld pipe
rpc_mkpipe_dentry() instantiates the pipe's dentry before it returns,
so the cld pipe can be opened as soon as nfsd4_cld_register_net() has
run. __nfsd4_init_cld_pipe() does not store the new cld_net in
nn->cld_net until after that call. cld_pipe_downcall() reaches the
cld_net only through that pointer and takes cn_lock without checking
it, so a write() that lands in the window oopses.
Store nn->cld_net once @cn is fully initialized and before the pipe is
registered, and clear it again when registration fails. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Map flex file layout IDs through the request's user namespace
nfsd4_ff_proc_layoutget() and nfsd4_ff_encode_layoutget() translate
the file's owner and group with init_user_ns, but every other identity
nfsd places on the wire goes through nfsd_user_namespace(). When the
transport carries a credential from a non-initial user namespace, the
flex file layout reports host-global IDs. The client copies those IDs
into the AUTH_SYS credential it presents to the data server, and
svcauth_unix_accept() resolves that credential in the transport's
namespace, so data server I/O runs under an identity unrelated to the
file's owner.
Switching to the request's namespace introduces a second hazard.
from_kuid() returns (uid_t)-1 when the target namespace has no
mapping for the owner, and the IOMODE_READ arm adds one to that
result to derive an identity for which the data server denies
writes. The addition would wrap to zero, handing the client uid 0
instead of an identity distinct from the owner.
Translate both IDs in nfsd4_ff_proc_layoutget(), which has the
svc_rqst, and carry the wire values in struct pnfs_ff_layout.
from_kuid_munged() substitutes overflowuid for an unmapped owner and
thus never returns (uid_t)-1, so the increment cannot wrap to zero. |