| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: esp: fix bad handling of pages from page_pool
When the skb is reorganized during esp_output (!esp->inline), the pages
coming from the original skb fragments are supposed to be released back
to the system through put_page. But if the skb fragment pages are
originating from a page_pool, calling put_page on them will trigger a
page_pool leak which will eventually result in a crash.
This leak can be easily observed when using CONFIG_DEBUG_VM and doing
ipsec + gre (non offloaded) forwarding:
BUG: Bad page state in process ksoftirqd/16 pfn:1451b6
page:00000000de2b8d32 refcount:0 mapcount:0 mapping:0000000000000000 index:0x1451b6000 pfn:0x1451b6
flags: 0x200000000000000(node=0|zone=2)
page_type: 0xffffffff()
raw: 0200000000000000 dead000000000040 ffff88810d23c000 0000000000000000
raw: 00000001451b6000 0000000000000001 00000000ffffffff 0000000000000000
page dumped because: page_pool leak
Modules linked in: ip_gre gre mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core overlay zram zsmalloc fuse [last unloaded: mlx5_core]
CPU: 16 PID: 96 Comm: ksoftirqd/16 Not tainted 6.8.0-rc4+ #22
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x36/0x50
bad_page+0x70/0xf0
free_unref_page_prepare+0x27a/0x460
free_unref_page+0x38/0x120
esp_ssg_unref.isra.0+0x15f/0x200
esp_output_tail+0x66d/0x780
esp_xmit+0x2c5/0x360
validate_xmit_xfrm+0x313/0x370
? validate_xmit_skb+0x1d/0x330
validate_xmit_skb_list+0x4c/0x70
sch_direct_xmit+0x23e/0x350
__dev_queue_xmit+0x337/0xba0
? nf_hook_slow+0x3f/0xd0
ip_finish_output2+0x25e/0x580
iptunnel_xmit+0x19b/0x240
ip_tunnel_xmit+0x5fb/0xb60
ipgre_xmit+0x14d/0x280 [ip_gre]
dev_hard_start_xmit+0xc3/0x1c0
__dev_queue_xmit+0x208/0xba0
? nf_hook_slow+0x3f/0xd0
ip_finish_output2+0x1ca/0x580
ip_sublist_rcv_finish+0x32/0x40
ip_sublist_rcv+0x1b2/0x1f0
? ip_rcv_finish_core.constprop.0+0x460/0x460
ip_list_rcv+0x103/0x130
__netif_receive_skb_list_core+0x181/0x1e0
netif_receive_skb_list_internal+0x1b3/0x2c0
napi_gro_receive+0xc8/0x200
gro_cell_poll+0x52/0x90
__napi_poll+0x25/0x1a0
net_rx_action+0x28e/0x300
__do_softirq+0xc3/0x276
? sort_range+0x20/0x20
run_ksoftirqd+0x1e/0x30
smpboot_thread_fn+0xa6/0x130
kthread+0xcd/0x100
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x31/0x50
? kthread_complete_and_exit+0x20/0x20
ret_from_fork_asm+0x11/0x20
</TASK>
The suggested fix is to introduce a new wrapper (skb_page_unref) that
covers page refcounting for page_pool pages as well. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix potencial out-of-bounds when buffer offset is invalid
I found potencial out-of-bounds when buffer offset fields of a few requests
is invalid. This patch set the minimum value of buffer offset field to
->Buffer offset to validate buffer length. |
| In the Linux kernel, the following vulnerability has been resolved:
wireguard: netlink: access device through ctx instead of peer
The previous commit fixed a bug that led to a NULL peer->device being
dereferenced. It's actually easier and faster performance-wise to
instead get the device from ctx->wg. This semantically makes more sense
too, since ctx->wg->peer_allowedips.seq is compared with
ctx->allowedips_seq, basing them both in ctx. This also acts as a
defence in depth provision against freed peers. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/vma: Fix UAF on destroy against retire race
Object debugging tools were sporadically reporting illegal attempts to
free a still active i915 VMA object when parking a GT believed to be idle.
[161.359441] ODEBUG: free active (active state 0) object: ffff88811643b958 object type: i915_active hint: __i915_vma_active+0x0/0x50 [i915]
[161.360082] WARNING: CPU: 5 PID: 276 at lib/debugobjects.c:514 debug_print_object+0x80/0xb0
...
[161.360304] CPU: 5 PID: 276 Comm: kworker/5:2 Not tainted 6.5.0-rc1-CI_DRM_13375-g003f860e5577+ #1
[161.360314] Hardware name: Intel Corporation Rocket Lake Client Platform/RocketLake S UDIMM 6L RVP, BIOS RKLSFWI1.R00.3173.A03.2204210138 04/21/2022
[161.360322] Workqueue: i915-unordered __intel_wakeref_put_work [i915]
[161.360592] RIP: 0010:debug_print_object+0x80/0xb0
...
[161.361347] debug_object_free+0xeb/0x110
[161.361362] i915_active_fini+0x14/0x130 [i915]
[161.361866] release_references+0xfe/0x1f0 [i915]
[161.362543] i915_vma_parked+0x1db/0x380 [i915]
[161.363129] __gt_park+0x121/0x230 [i915]
[161.363515] ____intel_wakeref_put_last+0x1f/0x70 [i915]
That has been tracked down to be happening when another thread is
deactivating the VMA inside __active_retire() helper, after the VMA's
active counter has been already decremented to 0, but before deactivation
of the VMA's object is reported to the object debugging tool.
We could prevent from that race by serializing i915_active_fini() with
__active_retire() via ref->tree_lock, but that wouldn't stop the VMA from
being used, e.g. from __i915_vma_retire() called at the end of
__active_retire(), after that VMA has been already freed by a concurrent
i915_vma_destroy() on return from the i915_active_fini(). Then, we should
rather fix the issue at the VMA level, not in i915_active.
Since __i915_vma_parked() is called from __gt_park() on last put of the
GT's wakeref, the issue could be addressed by holding the GT wakeref long
enough for __active_retire() to complete before that wakeref is released
and the GT parked.
I believe the issue was introduced by commit d93939730347 ("drm/i915:
Remove the vma refcount") which moved a call to i915_active_fini() from
a dropped i915_vma_release(), called on last put of the removed VMA kref,
to i915_vma_parked() processing path called on last put of a GT wakeref.
However, its visibility to the object debugging tool was suppressed by a
bug in i915_active that was fixed two weeks later with commit e92eb246feb9
("drm/i915/active: Fix missing debug object activation").
A VMA associated with a request doesn't acquire a GT wakeref by itself.
Instead, it depends on a wakeref held directly by the request's active
intel_context for a GT associated with its VM, and indirectly on that
intel_context's engine wakeref if the engine belongs to the same GT as the
VMA's VM. Those wakerefs are released asynchronously to VMA deactivation.
Fix the issue by getting a wakeref for the VMA's GT when activating it,
and putting that wakeref only after the VMA is deactivated. However,
exclude global GTT from that processing path, otherwise the GPU never goes
idle. Since __i915_vma_retire() may be called from atomic contexts, use
async variant of wakeref put. Also, to avoid circular locking dependency,
take care of acquiring the wakeref before VM mutex when both are needed.
v7: Add inline comments with justifications for:
- using untracked variants of intel_gt_pm_get/put() (Nirmoy),
- using async variant of _put(),
- not getting the wakeref in case of a global GTT,
- always getting the first wakeref outside vm->mutex.
v6: Since __i915_vma_active/retire() callbacks are not serialized, storing
a wakeref tracking handle inside struct i915_vma is not safe, and
there is no other good place for that. Use untracked variants of
intel_gt_pm_get/put_async().
v5: Replace "tile" with "GT" across commit description (Rodrigo),
-
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate request buffer size in smb2_allocate_rsp_buf()
The response buffer should be allocated in smb2_allocate_rsp_buf
before validating request. But the fields in payload as well as smb2 header
is used in smb2_allocate_rsp_buf(). This patch add simple buffer size
validation to avoid potencial out-of-bounds in request buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix command flush on cable pull
System crash due to command failed to flush back to SCSI layer.
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 27 PID: 793455 Comm: kworker/u130:6 Kdump: loaded Tainted: G OE --------- - - 4.18.0-372.9.1.el8.x86_64 #1
Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 09/03/2021
Workqueue: nvme-wq nvme_fc_connect_ctrl_work [nvme_fc]
RIP: 0010:__wake_up_common+0x4c/0x190
Code: 24 10 4d 85 c9 74 0a 41 f6 01 04 0f 85 9d 00 00 00 48 8b 43 08 48 83 c3 08 4c 8d 48 e8 49 8d 41 18 48 39 c3 0f 84 f0 00 00 00 <49> 8b 41 18 89 54 24 08 31 ed 4c 8d 70 e8 45 8b 29 41 f6 c5 04 75
RSP: 0018:ffff95f3e0cb7cd0 EFLAGS: 00010086
RAX: 0000000000000000 RBX: ffff8b08d3b26328 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffff8b08d3b26320
RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffffffffffe8
R10: 0000000000000000 R11: ffff95f3e0cb7a60 R12: ffff95f3e0cb7d20
R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff8b2fdf6c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000002f1e410002 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
__wake_up_common_lock+0x7c/0xc0
qla_nvme_ls_req+0x355/0x4c0 [qla2xxx]
qla2xxx [0000:12:00.1]-f084:3: qlt_free_session_done: se_sess 0000000000000000 / sess ffff8ae1407ca000 from port 21:32:00:02:ac:07:ee:b8 loop_id 0x02 s_id 01:02:00 logout 1 keep 0 els_logo 0
? __nvme_fc_send_ls_req+0x260/0x380 [nvme_fc]
qla2xxx [0000:12:00.1]-207d:3: FCPort 21:32:00:02:ac:07:ee:b8 state transitioned from ONLINE to LOST - portid=010200.
? nvme_fc_send_ls_req.constprop.42+0x1a/0x45 [nvme_fc]
qla2xxx [0000:12:00.1]-2109:3: qla2x00_schedule_rport_del 21320002ac07eeb8. rport ffff8ae598122000 roles 1
? nvme_fc_connect_ctrl_work.cold.63+0x1e3/0xa7d [nvme_fc]
qla2xxx [0000:12:00.1]-f084:3: qlt_free_session_done: se_sess 0000000000000000 / sess ffff8ae14801e000 from port 21:32:01:02:ad:f7:ee:b8 loop_id 0x04 s_id 01:02:01 logout 1 keep 0 els_logo 0
? __switch_to+0x10c/0x450
? process_one_work+0x1a7/0x360
qla2xxx [0000:12:00.1]-207d:3: FCPort 21:32:01:02:ad:f7:ee:b8 state transitioned from ONLINE to LOST - portid=010201.
? worker_thread+0x1ce/0x390
? create_worker+0x1a0/0x1a0
qla2xxx [0000:12:00.1]-2109:3: qla2x00_schedule_rport_del 21320102adf7eeb8. rport ffff8ae3b2312800 roles 70
? kthread+0x10a/0x120
qla2xxx [0000:12:00.1]-2112:3: qla_nvme_unregister_remote_port: unregister remoteport on ffff8ae14801e000 21320102adf7eeb8
? set_kthread_struct+0x40/0x40
qla2xxx [0000:12:00.1]-2110:3: remoteport_delete of ffff8ae14801e000 21320102adf7eeb8 completed.
? ret_from_fork+0x1f/0x40
qla2xxx [0000:12:00.1]-f086:3: qlt_free_session_done: waiting for sess ffff8ae14801e000 logout
The system was under memory stress where driver was not able to allocate an
SRB to carry out error recovery of cable pull. The failure to flush causes
upper layer to start modifying scsi_cmnd. When the system frees up some
memory, the subsequent cable pull trigger another command flush. At this
point the driver access a null pointer when attempting to DMA unmap the
SGL.
Add a check to make sure commands are flush back on session tear down to
prevent the null pointer access. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix double free of the ha->vp_map pointer
Coverity scan reported potential risk of double free of the pointer
ha->vp_map. ha->vp_map was freed in qla2x00_mem_alloc(), and again freed
in function qla2x00_mem_free(ha).
Assign NULL to vp_map and kfree take care of NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
binder: check offset alignment in binder_get_object()
Commit 6d98eb95b450 ("binder: avoid potential data leakage when copying
txn") introduced changes to how binder objects are copied. In doing so,
it unintentionally removed an offset alignment check done through calls
to binder_alloc_copy_from_buffer() -> check_buffer().
These calls were replaced in binder_get_object() with copy_from_user(),
so now an explicit offset alignment check is needed here. This avoids
later complications when unwinding the objects gets harder.
It is worth noting this check existed prior to commit 7a67a39320df
("binder: add function to copy binder object from buffer"), likely
removed due to redundancy at the time. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: release mutex after nft_gc_seq_end from abort path
The commit mutex should not be released during the critical section
between nft_gc_seq_begin() and nft_gc_seq_end(), otherwise, async GC
worker could collect expired objects and get the released commit lock
within the same GC sequence.
nf_tables_module_autoload() temporarily releases the mutex to load
module dependencies, then it goes back to replay the transaction again.
Move it at the end of the abort phase after nft_gc_seq_end() is called. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_pipapo: do not free live element
Pablo reports a crash with large batches of elements with a
back-to-back add/remove pattern. Quoting Pablo:
add_elem("00000000") timeout 100 ms
...
add_elem("0000000X") timeout 100 ms
del_elem("0000000X") <---------------- delete one that was just added
...
add_elem("00005000") timeout 100 ms
1) nft_pipapo_remove() removes element 0000000X
Then, KASAN shows a splat.
Looking at the remove function there is a chance that we will drop a
rule that maps to a non-deactivated element.
Removal happens in two steps, first we do a lookup for key k and return the
to-be-removed element and mark it as inactive in the next generation.
Then, in a second step, the element gets removed from the set/map.
The _remove function does not work correctly if we have more than one
element that share the same key.
This can happen if we insert an element into a set when the set already
holds an element with same key, but the element mapping to the existing
key has timed out or is not active in the next generation.
In such case its possible that removal will unmap the wrong element.
If this happens, we will leak the non-deactivated element, it becomes
unreachable.
The element that got deactivated (and will be freed later) will
remain reachable in the set data structure, this can result in
a crash when such an element is retrieved during lookup (stale
pointer).
Add a check that the fully matching key does in fact map to the element
that we have marked as inactive in the deactivation step.
If not, we need to continue searching.
Add a bug/warn trap at the end of the function as well, the remove
function must not ever be called with an invisible/unreachable/non-existent
element.
v2: avoid uneeded temporary variable (Stefano) |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Fix garbage collector racing against connect()
Garbage collector does not take into account the risk of embryo getting
enqueued during the garbage collection. If such embryo has a peer that
carries SCM_RIGHTS, two consecutive passes of scan_children() may see a
different set of children. Leading to an incorrectly elevated inflight
count, and then a dangling pointer within the gc_inflight_list.
sockets are AF_UNIX/SOCK_STREAM
S is an unconnected socket
L is a listening in-flight socket bound to addr, not in fdtable
V's fd will be passed via sendmsg(), gets inflight count bumped
connect(S, addr) sendmsg(S, [V]); close(V) __unix_gc()
---------------- ------------------------- -----------
NS = unix_create1()
skb1 = sock_wmalloc(NS)
L = unix_find_other(addr)
unix_state_lock(L)
unix_peer(S) = NS
// V count=1 inflight=0
NS = unix_peer(S)
skb2 = sock_alloc()
skb_queue_tail(NS, skb2[V])
// V became in-flight
// V count=2 inflight=1
close(V)
// V count=1 inflight=1
// GC candidate condition met
for u in gc_inflight_list:
if (total_refs == inflight_refs)
add u to gc_candidates
// gc_candidates={L, V}
for u in gc_candidates:
scan_children(u, dec_inflight)
// embryo (skb1) was not
// reachable from L yet, so V's
// inflight remains unchanged
__skb_queue_tail(L, skb1)
unix_state_unlock(L)
for u in gc_candidates:
if (u.inflight)
scan_children(u, inc_inflight_move_tail)
// V count=1 inflight=2 (!)
If there is a GC-candidate listening socket, lock/unlock its state. This
makes GC wait until the end of any ongoing connect() to that socket. After
flipping the lock, a possibly SCM-laden embryo is already enqueued. And if
there is another embryo coming, it can not possibly carry SCM_RIGHTS. At
this point, unix_inflight() can not happen because unix_gc_lock is already
taken. Inflight graph remains unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: validate the parameters of bo mapping operations more clearly
Verify the parameters of
amdgpu_vm_bo_(map/replace_map/clearing_mappings) in one common place. |
| In the Linux kernel, the following vulnerability has been resolved:
inet: inet_defrag: prevent sk release while still in use
ip_local_out() and other functions can pass skb->sk as function argument.
If the skb is a fragment and reassembly happens before such function call
returns, the sk must not be released.
This affects skb fragments reassembled via netfilter or similar
modules, e.g. openvswitch or ct_act.c, when run as part of tx pipeline.
Eric Dumazet made an initial analysis of this bug. Quoting Eric:
Calling ip_defrag() in output path is also implying skb_orphan(),
which is buggy because output path relies on sk not disappearing.
A relevant old patch about the issue was :
8282f27449bf ("inet: frag: Always orphan skbs inside ip_defrag()")
[..]
net/ipv4/ip_output.c depends on skb->sk being set, and probably to an
inet socket, not an arbitrary one.
If we orphan the packet in ipvlan, then downstream things like FQ
packet scheduler will not work properly.
We need to change ip_defrag() to only use skb_orphan() when really
needed, ie whenever frag_list is going to be used.
Eric suggested to stash sk in fragment queue and made an initial patch.
However there is a problem with this:
If skb is refragmented again right after, ip_do_fragment() will copy
head->sk to the new fragments, and sets up destructor to sock_wfree.
IOW, we have no choice but to fix up sk_wmem accouting to reflect the
fully reassembled skb, else wmem will underflow.
This change moves the orphan down into the core, to last possible moment.
As ip_defrag_offset is aliased with sk_buff->sk member, we must move the
offset into the FRAG_CB, else skb->sk gets clobbered.
This allows to delay the orphaning long enough to learn if the skb has
to be queued or if the skb is completing the reasm queue.
In the former case, things work as before, skb is orphaned. This is
safe because skb gets queued/stolen and won't continue past reasm engine.
In the latter case, we will steal the skb->sk reference, reattach it to
the head skb, and fix up wmem accouting when inet_frag inflates truesize. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: ulpi: Fix debugfs directory leak
The ULPI per-device debugfs root is named after the ulpi device's
parent, but ulpi_unregister_interface tries to remove a debugfs
directory named after the ulpi device itself. This results in the
directory sticking around and preventing subsequent (deferred) probes
from succeeding. Change the directory name to match the ulpi device. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/buddy: Fix alloc_range() error handling code
Few users have observed display corruption when they boot
the machine to KDE Plasma or playing games. We have root
caused the problem that whenever alloc_range() couldn't
find the required memory blocks the function was returning
SUCCESS in some of the corner cases.
The right approach would be if the total allocated size
is less than the required size, the function should
return -ENOSPC. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: pmic_glink_altmode: fix drm bridge use-after-free
A recent DRM series purporting to simplify support for "transparent
bridges" and handling of probe deferrals ironically exposed a
use-after-free issue on pmic_glink_altmode probe deferral.
This has manifested itself as the display subsystem occasionally failing
to initialise and NULL-pointer dereferences during boot of machines like
the Lenovo ThinkPad X13s.
Specifically, the dp-hpd bridge is currently registered before all
resources have been acquired which means that it can also be
deregistered on probe deferrals.
In the meantime there is a race window where the new aux bridge driver
(or PHY driver previously) may have looked up the dp-hpd bridge and
stored a (non-reference-counted) pointer to the bridge which is about to
be deallocated.
When the display controller is later initialised, this triggers a
use-after-free when attaching the bridges:
dp -> aux -> dp-hpd (freed)
which may, for example, result in the freed bridge failing to attach:
[drm:drm_bridge_attach [drm]] *ERROR* failed to attach bridge /soc@0/phy@88eb000 to encoder TMDS-31: -16
or a NULL-pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
...
Call trace:
drm_bridge_attach+0x70/0x1a8 [drm]
drm_aux_bridge_attach+0x24/0x38 [aux_bridge]
drm_bridge_attach+0x80/0x1a8 [drm]
dp_bridge_init+0xa8/0x15c [msm]
msm_dp_modeset_init+0x28/0xc4 [msm]
The DRM bridge implementation is clearly fragile and implicitly built on
the assumption that bridges may never go away. In this case, the fix is
to move the bridge registration in the pmic_glink_altmode driver to
after all resources have been looked up.
Incidentally, with the new dp-hpd bridge implementation, which registers
child devices, this is also a requirement due to a long-standing issue
in driver core that can otherwise lead to a probe deferral loop (see
commit fbc35b45f9f6 ("Add documentation on meaning of -EPROBE_DEFER")).
[DB: slightly fixed commit message by adding the word 'commit'] |
| In the Linux kernel, the following vulnerability has been resolved:
aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts
This patch is against CVE-2023-6270. The description of cve is:
A flaw was found in the ATA over Ethernet (AoE) driver in the Linux
kernel. The aoecmd_cfg_pkts() function improperly updates the refcnt on
`struct net_device`, and a use-after-free can be triggered by racing
between the free on the struct and the access through the `skbtxq`
global queue. This could lead to a denial of service condition or
potential code execution.
In aoecmd_cfg_pkts(), it always calls dev_put(ifp) when skb initial
code is finished. But the net_device ifp will still be used in
later tx()->dev_queue_xmit() in kthread. Which means that the
dev_put(ifp) should NOT be called in the success path of skb
initial code in aoecmd_cfg_pkts(). Otherwise tx() may run into
use-after-free because the net_device is freed.
This patch removed the dev_put(ifp) in the success path in
aoecmd_cfg_pkts(), and added dev_put() after skb xmit in tx(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btrtl: fix out of bounds memory access
The problem is detected by KASAN.
btrtl driver uses private hci data to store 'struct btrealtek_data'.
If btrtl driver is used with btusb, then memory for private hci data
is allocated in btusb. But no private data is allocated after hci_dev,
when btrtl is used with hci_h5.
This commit adds memory allocation for hci_h5 case.
==================================================================
BUG: KASAN: slab-out-of-bounds in btrtl_initialize+0x6cc/0x958 [btrtl]
Write of size 8 at addr ffff00000f5a5748 by task kworker/u9:0/76
Hardware name: Pine64 PinePhone (1.2) (DT)
Workqueue: hci0 hci_power_on [bluetooth]
Call trace:
dump_backtrace+0x9c/0x128
show_stack+0x20/0x38
dump_stack_lvl+0x48/0x60
print_report+0xf8/0x5d8
kasan_report+0x90/0xd0
__asan_store8+0x9c/0xc0
[btrtl]
h5_btrtl_setup+0xd0/0x2f8 [hci_uart]
h5_setup+0x50/0x80 [hci_uart]
hci_uart_setup+0xd4/0x260 [hci_uart]
hci_dev_open_sync+0x1cc/0xf68 [bluetooth]
hci_dev_do_open+0x34/0x90 [bluetooth]
hci_power_on+0xc4/0x3c8 [bluetooth]
process_one_work+0x328/0x6f0
worker_thread+0x410/0x778
kthread+0x168/0x178
ret_from_fork+0x10/0x20
Allocated by task 53:
kasan_save_stack+0x3c/0x68
kasan_save_track+0x20/0x40
kasan_save_alloc_info+0x68/0x78
__kasan_kmalloc+0xd4/0xd8
__kmalloc+0x1b4/0x3b0
hci_alloc_dev_priv+0x28/0xa58 [bluetooth]
hci_uart_register_device+0x118/0x4f8 [hci_uart]
h5_serdev_probe+0xf4/0x178 [hci_uart]
serdev_drv_probe+0x54/0xa0
really_probe+0x254/0x588
__driver_probe_device+0xc4/0x210
driver_probe_device+0x64/0x160
__driver_attach_async_helper+0x88/0x158
async_run_entry_fn+0xd0/0x388
process_one_work+0x328/0x6f0
worker_thread+0x410/0x778
kthread+0x168/0x178
ret_from_fork+0x10/0x20
Last potentially related work creation:
kasan_save_stack+0x3c/0x68
__kasan_record_aux_stack+0xb0/0x150
kasan_record_aux_stack_noalloc+0x14/0x20
__queue_work+0x33c/0x960
queue_work_on+0x98/0xc0
hci_recv_frame+0xc8/0x1e8 [bluetooth]
h5_complete_rx_pkt+0x2c8/0x800 [hci_uart]
h5_rx_payload+0x98/0xb8 [hci_uart]
h5_recv+0x158/0x3d8 [hci_uart]
hci_uart_receive_buf+0xa0/0xe8 [hci_uart]
ttyport_receive_buf+0xac/0x178
flush_to_ldisc+0x130/0x2c8
process_one_work+0x328/0x6f0
worker_thread+0x410/0x778
kthread+0x168/0x178
ret_from_fork+0x10/0x20
Second to last potentially related work creation:
kasan_save_stack+0x3c/0x68
__kasan_record_aux_stack+0xb0/0x150
kasan_record_aux_stack_noalloc+0x14/0x20
__queue_work+0x788/0x960
queue_work_on+0x98/0xc0
__hci_cmd_sync_sk+0x23c/0x7a0 [bluetooth]
__hci_cmd_sync+0x24/0x38 [bluetooth]
btrtl_initialize+0x760/0x958 [btrtl]
h5_btrtl_setup+0xd0/0x2f8 [hci_uart]
h5_setup+0x50/0x80 [hci_uart]
hci_uart_setup+0xd4/0x260 [hci_uart]
hci_dev_open_sync+0x1cc/0xf68 [bluetooth]
hci_dev_do_open+0x34/0x90 [bluetooth]
hci_power_on+0xc4/0x3c8 [bluetooth]
process_one_work+0x328/0x6f0
worker_thread+0x410/0x778
kthread+0x168/0x178
ret_from_fork+0x10/0x20
================================================================== |
| In the Linux kernel, the following vulnerability has been resolved:
net: ip_tunnel: make sure to pull inner header in ip_tunnel_rcv()
Apply the same fix than ones found in :
8d975c15c0cd ("ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()")
1ca1ba465e55 ("geneve: make sure to pull inner header in geneve_rx()")
We have to save skb->network_header in a temporary variable
in order to be able to recompute the network_header pointer
after a pskb_inet_may_pull() call.
pskb_inet_may_pull() makes sure the needed headers are in skb->head.
syzbot reported:
BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline]
BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline]
BUG: KMSAN: uninit-value in IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline]
BUG: KMSAN: uninit-value in ip_tunnel_rcv+0xed9/0x2ed0 net/ipv4/ip_tunnel.c:409
__INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline]
INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline]
IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline]
ip_tunnel_rcv+0xed9/0x2ed0 net/ipv4/ip_tunnel.c:409
__ipgre_rcv+0x9bc/0xbc0 net/ipv4/ip_gre.c:389
ipgre_rcv net/ipv4/ip_gre.c:411 [inline]
gre_rcv+0x423/0x19f0 net/ipv4/ip_gre.c:447
gre_rcv+0x2a4/0x390 net/ipv4/gre_demux.c:163
ip_protocol_deliver_rcu+0x264/0x1300 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x2b8/0x440 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:461 [inline]
ip_rcv_finish net/ipv4/ip_input.c:449 [inline]
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_rcv+0x46f/0x760 net/ipv4/ip_input.c:569
__netif_receive_skb_one_core net/core/dev.c:5534 [inline]
__netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5648
netif_receive_skb_internal net/core/dev.c:5734 [inline]
netif_receive_skb+0x58/0x660 net/core/dev.c:5793
tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1556
tun_get_user+0x53b9/0x66e0 drivers/net/tun.c:2009
tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2055
call_write_iter include/linux/fs.h:2087 [inline]
new_sync_write fs/read_write.c:497 [inline]
vfs_write+0xb6b/0x1520 fs/read_write.c:590
ksys_write+0x20f/0x4c0 fs/read_write.c:643
__do_sys_write fs/read_write.c:655 [inline]
__se_sys_write fs/read_write.c:652 [inline]
__x64_sys_write+0x93/0xd0 fs/read_write.c:652
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Uninit was created at:
__alloc_pages+0x9a6/0xe00 mm/page_alloc.c:4590
alloc_pages_mpol+0x62b/0x9d0 mm/mempolicy.c:2133
alloc_pages+0x1be/0x1e0 mm/mempolicy.c:2204
skb_page_frag_refill+0x2bf/0x7c0 net/core/sock.c:2909
tun_build_skb drivers/net/tun.c:1686 [inline]
tun_get_user+0xe0a/0x66e0 drivers/net/tun.c:1826
tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2055
call_write_iter include/linux/fs.h:2087 [inline]
new_sync_write fs/read_write.c:497 [inline]
vfs_write+0xb6b/0x1520 fs/read_write.c:590
ksys_write+0x20f/0x4c0 fs/read_write.c:643
__do_sys_write fs/read_write.c:655 [inline]
__se_sys_write fs/read_write.c:652 [inline]
__x64_sys_write+0x93/0xd0 fs/read_write.c:652
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: fix kernel crash when 1588 is received on HIP08 devices
The HIP08 devices does not register the ptp devices, so the
hdev->ptp is NULL, but the hardware can receive 1588 messages,
and set the HNS3_RXD_TS_VLD_B bit, so, if match this case, the
access of hdev->ptp->flags will cause a kernel crash:
[ 5888.946472] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
[ 5888.946475] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
...
[ 5889.266118] pc : hclge_ptp_get_rx_hwts+0x40/0x170 [hclge]
[ 5889.272612] lr : hclge_ptp_get_rx_hwts+0x34/0x170 [hclge]
[ 5889.279101] sp : ffff800012c3bc50
[ 5889.283516] x29: ffff800012c3bc50 x28: ffff2040002be040
[ 5889.289927] x27: ffff800009116484 x26: 0000000080007500
[ 5889.296333] x25: 0000000000000000 x24: ffff204001c6f000
[ 5889.302738] x23: ffff204144f53c00 x22: 0000000000000000
[ 5889.309134] x21: 0000000000000000 x20: ffff204004220080
[ 5889.315520] x19: ffff204144f53c00 x18: 0000000000000000
[ 5889.321897] x17: 0000000000000000 x16: 0000000000000000
[ 5889.328263] x15: 0000004000140ec8 x14: 0000000000000000
[ 5889.334617] x13: 0000000000000000 x12: 00000000010011df
[ 5889.340965] x11: bbfeff4d22000000 x10: 0000000000000000
[ 5889.347303] x9 : ffff800009402124 x8 : 0200f78811dfbb4d
[ 5889.353637] x7 : 2200000000191b01 x6 : ffff208002a7d480
[ 5889.359959] x5 : 0000000000000000 x4 : 0000000000000000
[ 5889.366271] x3 : 0000000000000000 x2 : 0000000000000000
[ 5889.372567] x1 : 0000000000000000 x0 : ffff20400095c080
[ 5889.378857] Call trace:
[ 5889.382285] hclge_ptp_get_rx_hwts+0x40/0x170 [hclge]
[ 5889.388304] hns3_handle_bdinfo+0x324/0x410 [hns3]
[ 5889.394055] hns3_handle_rx_bd+0x60/0x150 [hns3]
[ 5889.399624] hns3_clean_rx_ring+0x84/0x170 [hns3]
[ 5889.405270] hns3_nic_common_poll+0xa8/0x220 [hns3]
[ 5889.411084] napi_poll+0xcc/0x264
[ 5889.415329] net_rx_action+0xd4/0x21c
[ 5889.419911] __do_softirq+0x130/0x358
[ 5889.424484] irq_exit+0x134/0x154
[ 5889.428700] __handle_domain_irq+0x88/0xf0
[ 5889.433684] gic_handle_irq+0x78/0x2c0
[ 5889.438319] el1_irq+0xb8/0x140
[ 5889.442354] arch_cpu_idle+0x18/0x40
[ 5889.446816] default_idle_call+0x5c/0x1c0
[ 5889.451714] cpuidle_idle_call+0x174/0x1b0
[ 5889.456692] do_idle+0xc8/0x160
[ 5889.460717] cpu_startup_entry+0x30/0xfc
[ 5889.465523] secondary_start_kernel+0x158/0x1ec
[ 5889.470936] Code: 97ffab78 f9411c14 91408294 f9457284 (f9400c80)
[ 5889.477950] SMP: stopping secondary CPUs
[ 5890.514626] SMP: failed to stop secondary CPUs 0-69,71-95
[ 5890.522951] Starting crashdump kernel... |
