| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The WPMU DEV Dashboard plugin for WordPress is vulnerable to Authentication Bypass in all versions up to, and including, 5.0.1. This is due to inconsistent and ambiguous HMAC message construction between the unauthenticated `wdpsso_step1` and `wdpsso_step2` AJAX actions, where step 1 signs and discloses an unseparated concatenation of the token, state, redirect, and domain values, while step 2 verifies an unseparated concatenation that omits the domain field. This makes it possible for unauthenticated attackers, on sites connected to WPMU DEV with Hub SSO enabled and mapped to an administrator, to obtain a valid HMAC from step 1 and replay it to step 2 by moving the domain value into the redirect field, resulting in an authenticated administrator session. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: bnxt: avoid deadlock when canceling IRQ affinity notifier
Unregistering IRQ affinity notifiers waits for the callback synchronously.
bnxt takes the netdev instance lock in the notifier (to restart the queue)
and cancels the work under the same lock. This may obviously deadlock.
Move the restart to the async service task. The queue restart isn't
super time sensitive. Store the new TPH tag, schedule the task.
Safely canceling the service task is already ironed out.
In bnxt_request_irq() the order of registering notifier, affinity and
initial TPH programming has to be inverted. I think it was racy
previously since user may trigger an update as soon as notifier
is installed.
There's a small known gap - if pcie_tph_get_cpu_st() fails at init
and the target tag is 0 we may miss programming the entry.
This does not seem worth fixing, the code has skip-on-failure
all over the place, anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: defer key slot crypto freeing to workqueue
Key slots are released through a kref and the existing release path
frees the AEAD transforms from an RCU callback. That is not safe for all
crypto implementations: crypto_free_aead can sleep, for example when an
async or hardware implementation has teardown work to complete.
Use queue_rcu_work for key-slot release. This keeps the RCU grace period
needed by lockless key-slot readers, but runs the actual crypto teardown
from workqueue context where sleeping is allowed. Once the rcu_work
callback runs, pre-existing RCU readers are gone, and the final kref put
already proves that no transform user remains, so the worker can release
the AEAD transforms and free the slot directly.
The previous patch drains ovpn_wq during module exit, so queued key-slot
teardown work cannot outlive module text. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Reject exited events as group leaders
perf_event_remove_on_exec() sets remove-on-exec events to the EXIT state
and detaches their group relationships. The event's file descriptor can
remain open, however, and perf_event_open() currently accepts that event
as a group leader because its early validation rejects only REVOKED and
DEAD events.
A new sibling can consequently be linked to the detached leader. When
the leader is closed, perf_group_detach() observes that its
PERF_ATTACH_GROUP bit is already clear and skips the new sibling. The
sibling then retains a group_leader pointer to the freed event.
Reject group leaders in the EXIT state. Perform the check while holding
the shared context mutex so that an exec in the target task cannot detach
the leader between validation and group attachment.
[peterz: make the earlier test fully consistent] |
| go-wind-cms (GoWind) before 1.0.0 has a missing authorization vulnerability. The NewAuthorizer() function in app/admin/service/internal/data/data.go and app/app/service/internal/data/data.go returns a no-op authorization engine (noop.State{}), so the authz middleware always allows requests. Any authenticated user (regardless of role or tenant) can invoke administrative APIs such as deleting users, resetting passwords, and creating tenants. |
| A vulnerability in pentestgpt/core/langfuse.py in PentestGPT 1.0.0 allows remote attackers to disclose sensitive user telemetry data via hardcoded API credentials. |
| Stomper 5e2741e is vulnerable to Use-After-Free. When a client sends multiple CONNECT frames on the same TCP connection, and subsequently another client (or a later connection) sends SEND frames to a destination previously subscribed on that connection, the broker may dereference a pointer to a StompStreamSocket object that has already been freed. This results in a heap use-after-free and process crash. Because the protocol does not authenticate or restrict such sequences by default. |
| In Stomper 5e2741e when a client sends a SEND frame missing the destination header field, the server triggers a null pointer dereference (or access to invalid memory) while processing the frame, causing the process to crash. |
| Cross Site Scripting vulnerability in Cockpit CMS v.2.13.5 and before allows a remote attacker to execute arbitrary code via the item.php, field-select.js and tags.js components. |
| tamguo 1.5.3 is vulnerable to Unrestricted File Upload Leading to Stored XSS. The /uploadFile and /imgUpload endpoints in FileUploadController.java and UEditorController.java have no file type validation. Attackers can upload arbitrary HTML/JavaScript files to the server. |
| Dolibarr 9.0.0 through 23.0.4 saves inbound email attachments under the name supplied in the message's MIME headers without reducing it to a safe basename. The global saveAttachment() in htdocs/emailcollector/lib/emailcollector.lib.php builds $filepath = $path . $filename . '.' . $ext and hands it to file_put_contents(), and the private saveAttachment() in htdocs/emailcollector/class/emailcollector.class.php writes to $destdir.'/'.$filename; the name reaches both from the attachment's own getName() or getFilename() value by way of the record-join, create-ticket and create-project operations. A traversal sequence in the filename therefore survives intact, so any sender who can email a mailbox that an EmailCollector monitors, which is the module's ordinary use for a support or ticket inbox, can place attacker-controlled content outside the per-object attachment directory without holding a Dolibarr account. Under the hardened layout Dolibarr's SECURITY.md requires, with htdocs read-only, the write is confined to the documents tree and corrupts or forges other objects' documents; where htdocs is writable the same primitive reaches a web-executable path. Version 24.0.0 applies dol_sanitizePathName() and dol_sanitizeFileName() before the write. |
| A flaw has been found in RooCodeInc Roo-Code up to 3.51.1. This issue affects the function path.resolve of the file src/core/tools/ApplyPatchTool.ts of the component ApplyPatchTool. This manipulation causes path traversal. It is possible to initiate the attack remotely. The exploit has been published and may be used. Multiple isses were reported to the vendor beforehand. They explain, that "they all apply to Roo Code, a project we no longer support - the repository was archived a while ago, and we don't encourage anyone to use it." This vulnerability only affects products that are no longer supported by the maintainer. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: publish GC-visible tuple last
nf_flow_table_iterate() only treats original-direction tuple nodes as
owning entries. Publishing the original node first lets GC observe and
free a flow while flow_offload_add() is still inserting the reply node.
Publish the reply node first and the original node last so GC never
sees a partially installed flow.
KASAN can trigger slab-use-after-free read and write reports in the
flowtable/rhashtable path (rht_deferred_worker, jhash, flow_offload_del,
flow_offload_lookup, etc.). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: fix refcount race between list:set GC and swap
__ip_set_put_byindex() resolved the index to a set pointer under RCU,
then took ip_set_ref_lock in __ip_set_put() to decrement set->ref.
ip_set_swap() holds that same lock while swapping both the ip_set_list
slots and the two sets' ref counters, so it can interleave between the
dereference and the lock acquisition, leaving the caller to decrement a
set whose reference already moved to the other index and hit
BUG_ON(set->ref == 0). list_set_gc() reaches this from timer softirq,
which the nfnl mutex does not serialize against swap: an expiring
list:set member calls list_set_del() -> ip_set_put_byindex() while
IPSET_CMD_SWAP runs on the referenced sets.
Resolve the index and decrement under ip_set_ref_lock, as ip_set_swap()
already does, keeping the refcount tied to the index rather than to a
stale set pointer.
kernel BUG at net/netfilter/ipset/ip_set_core.c:685!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:ip_set_put_byindex (net/netfilter/ipset/ip_set_core.c:870)
Call Trace:
<IRQ>
list_set_del (net/netfilter/ipset/ip_set_list_set.c:159)
set_cleanup_entries (net/netfilter/ipset/ip_set_list_set.c:181)
list_set_gc (net/netfilter/ipset/ip_set_list_set.c:578)
call_timer_fn (kernel/time/timer.c:1748)
__run_timers (kernel/time/timer.c:1799 kernel/time/timer.c:2374)
run_timer_softirq (kernel/time/timer.c:2405)
</IRQ>
Kernel panic - not syncing: Fatal exception in interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: lib: Fix ZBB strnlen reading past count boundary
The ZBB-optimized strnlen loop loads one word ahead before checking the
aligned boundary:
REG_L t1, SZREG(t0) // load next word
addi t0, t0, SZREG // advance
orc.b t1, t1
bgeu t0, t4, 4f // boundary check AFTER load
where t4 = (s + count) & -SZREG. When s is aligned and count is a
multiple of SZREG, t4 equals s + count and the loop loads a full word
starting at exactly s + count. If s + count falls on a page boundary
with the next page unmapped, this faults.
Fix by computing the aligned boundary from the last valid byte
(s + count - 1) instead of s + count. This makes the loop stop at the
word containing the last valid byte rather than potentially loading the
word after it. The count == 0 case is already handled by the beqz
early exit.
Also add a pre-loop guard (bgeu t0, t4) for the case where all valid
bytes fit within the first word. With the adjusted boundary, t4 can
equal t0, and entering the loop with stale register state from the
first-word processing would produce incorrect results.
The final minu clamp ensures the result is still correct when the last
loaded word extends past s + count - 1 within the same aligned word. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: pair EH runtime PM get and put
shost->eh_noresume is currently consulted twice in one error handling
iteration: once before scsi_autopm_get_host() and once again before
scsi_autopm_put_host().
That is racy when a PM-triggered error path flips shost->eh_noresume
while the SCSI EH thread is still running.
The problem flow looks like this:
PM path
ufshcd_set_dev_pwr_mode()
shost->eh_noresume = 1
ufshcd_execute_start_stop <-- trigger EH
...
shost->eh_noresume = 0
EH path
scsi_error_handler()
if (!shost->eh_noresume)
scsi_autopm_get_host() <-- skipped
...
if (!shost->eh_noresume)
scsi_autopm_put_host() <-- executed later
In that case one EH iteration can skip autoresume on entry and still
drop a runtime PM reference on exit. That leaves an unmatched runtime PM
put and can trigger a runtime PM usage count underflow.
Fix this by making eh_noresume a regular bool so it can be accessed with
READ_ONCE() and WRITE_ONCE(). Snapshot it once per EH iteration and use
that snapshot for both runtime PM get and put decisions. |
| An issue in the CreateUEContext handler component of free5gc v4.1.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted request. |
| A Division-by-Zero vulnerability in the ff_sws_init_single_context function (/libswscale/utils.c) of FFmpeg N-122528-gdd2976b9e1 allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| A path traversal vulnerability exists in the built-in preview/development web server of Lektor <3.3.14 on Windows. An attacker with network access to the server can send a crafted HTTP request containing path traversal sequences to read arbitrary files accessible to the process, disclosing sensitive information such as system files and deployment configuration files containing credentials. |
| Any application shipping logs to RabbitMQ over TLS via the Log4j2 appender, relying on the documented default, is exposed to man-in-the-middle interception of every log event.
Spring AMQP 4.1.0
Spring AMQP 4.0.0 - 4.0.4
Spring AMQP 3.2.0 - 3.2.12
Spring AMQP 2.4.18 and earlier |
