| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in Cisco Emergency Responder could allow an unauthenticated, remote attacker to log in to an affected device using the root account, which has default, static credentials that cannot be changed or deleted.
This vulnerability is due to the presence of static user credentials for the root account that are typically reserved for use during development. An attacker could exploit this vulnerability by using the account to log in to an affected system. A successful exploit could allow the attacker to log in to the affected system and execute arbitrary commands as the root user. |
| A vulnerability in the inter-device communication mechanisms between devices that are running Cisco Firepower Threat Defense (FTD) Software and devices that are running Cisco Firepower Management (FMC) Software could allow an authenticated, local attacker to execute arbitrary commands with root permissions on the underlying operating system of an affected device.
This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by accessing the expert mode of an affected device and submitting specific commands to a connected system. A successful exploit could allow the attacker to execute arbitrary code in the context of an FMC device if the attacker has administrative privileges on an associated FTD device. Alternatively, a successful exploit could allow the attacker to execute arbitrary code in the context of an FTD device if the attacker has administrative privileges on an associated FMC device. |
| A vulnerability in the web services interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute certain unauthorized configuration commands on a Firepower Threat Defense (FTD) device that is managed by the FMC Software. This vulnerability is due to insufficient authorization of configuration commands that are sent through the web service interface. An attacker could exploit this vulnerability by authenticating to the FMC web services interface and sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to execute certain configuration commands on the targeted FTD device. To successfully exploit this vulnerability, an attacker would need valid credentials on the FMC Software. |
| A vulnerability in the debug shell of Cisco Video Phone 8875 and Cisco Desk Phone 9800 Series could allow an authenticated, local attacker to access sensitive information on an affected device. To exploit this vulnerability, the attacker must have valid administrative credentials with SSH access on the affected device. SSH access is disabled by default.
This vulnerability is due to insufficient validation of user-supplied input by the debug shell of an affected device. An attacker could exploit this vulnerability by sending a crafted SSH client command to the CLI. A successful exploit could allow the attacker to access sensitive information on the underlying operating system. |
| A vulnerability in the web UI of Cisco Desk Phone 9800 Series, Cisco IP Phone 7800 and 8800 Series, and Cisco Video Phone 8875 running Cisco SIP Software could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device.
This vulnerability is due to a buffer overflow when an affected device processes HTTP packets. An attacker could exploit this vulnerability by sending crafted HTTP input to the device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
Note: To exploit this vulnerability, the phone must be registered to Cisco Unified Communications Manager and have Web Access enabled. Web Access is disabled by default. |
| A vulnerability in the web UI of Cisco Desk Phone 9800 Series, Cisco IP Phone 7800 and 8800 Series, and Cisco Video Phone 8875 running Cisco SIP Software could allow an unauthenticated, remote attacker to conduct XSS attacks against a user of the web UI.
This vulnerability exists because the web UI of an affected device does not sufficiently validate user-supplied input. An attacker could exploit this vulnerability by persuading a user to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information.
Note: To exploit this vulnerability, the phone must be registered to Cisco Unified Communications Manager and have Web Access enabled. Web Access is disabled by default. |
| Multiple vulnerabilities in the web-based management interface of Cisco ISE and Cisco ISE-PIC could allow an authenticated, remote attacker to conduct a reflected XSS attack against a user of the interface.
These vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface of an affected system. An attacker could exploit these vulnerabilities by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit these vulnerabilities, the attacker must have at least a low-privileged account on the affected device. |
| Multiple vulnerabilities in the web-based management interface of Cisco ISE and Cisco ISE-PIC could allow an authenticated, remote attacker to conduct a reflected XSS attack against a user of the interface.
These vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface of an affected system. An attacker could exploit these vulnerabilities by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit these vulnerabilities, the attacker must have at least a low-privileged account on the affected device. |
| A vulnerability in the web-based management interface of Cisco ISE could allow an authenticated, remote attacker to obtain sensitive information from an affected device.
This vulnerability exists because certain files lack proper data protection mechanisms. An attacker with read-only Administrator privileges could exploit this vulnerability by performing actions where the results should only be viewable to a high-privileged user. A successful exploit could allow the attacker to view passwords that are normally not visible to read-only administrators. |
| Multiple vulnerabilities in the web-based management interface of Cisco ISE and Cisco ISE-PIC could allow an authenticated, remote attacker to conduct a reflected XSS attack against a user of the interface.
These vulnerabilities are due to insufficient validation of user-supplied input by the web-based management interface of an affected system. An attacker could exploit these vulnerabilities by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit these vulnerabilities, the attacker must have at least a low-privileged account on the affected device. |
| A vulnerability in the logging component of Cisco TelePresence Collaboration Endpoint (CE) and Cisco RoomOS Software could allow an authenticated, remote attacker to view sensitive information in clear text on an affected system. To exploit this vulnerability, the attacker must have valid administrative credentials.
This vulnerability exists because certain unencrypted credentials are stored when SIP media component logging is enabled. An attacker could exploit this vulnerability by accessing the audit logs on an affected system and obtaining credentials to which they may not normally have access. A successful exploit could allow the attacker to use those credentials to access confidential information, some of which may contain personally identifiable information (PII).
Note: To access the logs that are stored in the Webex Cloud or stored on the device itself, an attacker must have valid administrative credentials. |
| A vulnerability in the web-based management interface of Cisco Catalyst Center could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the interface of an affected device.
This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by persuading a user of the web-based management interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. |
| A vulnerability in the RADIUS setting Reject RADIUS requests from clients with repeated failures on Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to cause Cisco ISE to restart unexpectedly.
This vulnerability is due to a logic error when processing a RADIUS access request for a MAC address that is already a rejected endpoint. An attacker could exploit this vulnerability by sending a specific sequence of multiple crafted RADIUS access request messages to Cisco ISE. A successful exploit could allow the attacker to cause a denial of service (DoS) condition when Cisco ISE restarts. |
| A vulnerability in the web UI of Cisco Unified CCX could allow an authenticated, remote attacker to perform a directory traversal and access arbitrary resources.
This vulnerability is due to an insufficient input validation associated to specific UI features. An attacker could exploit this vulnerability by sending a crafted request to the web UI. A successful exploit could allow the attacker to gain read access to arbitrary files on the underlying operating system. To exploit this vulnerability, the attacker must have valid administrative credentials. |
| Layer 2 network filtering capabilities such as IPv6 RA guard or ARP inspection can be bypassed using combinations of VLAN 0 headers and LLC/SNAP headers. |
| IP-in-IP protocol specifies IP Encapsulation within IP standard (RFC 2003, STD 1) that decapsulate and route IP-in-IP traffic is vulnerable to spoofing, access-control bypass and other unexpected behavior due to the lack of validation to verify network packets before decapsulation and routing. |
| A vulnerability in the Object Linking and Embedding 2 (OLE2) decryption routine of ClamAV could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to an integer underflow in a bounds check that allows for a heap buffer overflow read. An attacker could exploit this vulnerability by submitting a crafted file containing OLE2 content to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to terminate the ClamAV scanning process, resulting in a DoS condition on the affected software.
For a description of this vulnerability, see the .
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| A vulnerability in the VLAN Trunking Protocol (VTP) subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to corrupt the internal VTP database on an affected device and cause a denial of service (DoS) condition. The vulnerability is due to a logic error in how the affected software handles a subset of VTP packets. An attacker could exploit this vulnerability by sending VTP packets in a sequence that triggers a timeout in the VTP message processing code of the affected software. A successful exploit could allow the attacker to impact the ability to create, modify, or delete VLANs and cause a DoS condition. There are workarounds that address this vulnerability. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS Software or Cisco IOS XE Software, are operating in VTP client mode or VTP server mode, and do not have a VTP domain name configured. The default configuration for Cisco devices that are running Cisco IOS Software or Cisco IOS XE Software and support VTP is to operate in VTP server mode with no domain name configured. |
| A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, remote attacker to execute arbitrary code with administrative privileges or cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a logic error that occurs during the validation of CAPWAP packets. An attacker could exploit this vulnerability by sending a crafted CAPWAP packet to an affected device. A successful exploit could allow the attacker to execute arbitrary code with administrative privileges or cause the affected device to crash and reload, resulting in a DoS condition. |
| A vulnerability in the Voice Telephony Service Provider (VTSP) service of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to bypass configured destination patterns and dial arbitrary numbers. This vulnerability is due to insufficient validation of dial strings at Foreign Exchange Office (FXO) interfaces. An attacker could exploit this vulnerability by sending a malformed dial string to an affected device via either the ISDN protocol or SIP. A successful exploit could allow the attacker to conduct toll fraud, resulting in unexpected financial impact to affected customers. |
