| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: use copy-on-write RCU updates in ip6_mc_source()
pmc->sflist is read locklessly under rcu_read_lock() by
inet6_mc_check() during packet reception in the UDP and RAW
multicast receive paths.
ip6_mc_source() mutated psl->sl_addr and psl->sl_count in-place
when adding or removing a source filter. Additionally, when expanding
the filter buffer, newpsl was published via rcu_assign_pointer()
before writing the new source into the array.
Because 16-byte struct in6_addr writes are not atomic and array
shifting is not synchronized with RCU readers, concurrent readers in
inet6_mc_check() could read torn IPv6 addresses or observe
duplicated/missed source entries.
Fix this by switching ip6_mc_source() to copy-on-write RCU updates:
allocate and fully populate newpsl before publishing it via
rcu_assign_pointer(), and reclaim the old filter via kfree_rcu(),
matching ip6_mc_msfilter().
Also remove the now unused IP6_SFBLOCK macro. |
| The microcontroller lacks enabled debug lock bits, leaving the physical Single-Wire (SWS) debugging interface completely unrestricted. This allows an attacker with physical access to use a hardware programmer to dump the entire production firmware. |
| The firmware and flash memory store critical cryptographic secrets, such as global AES keys and network master keys, in unencrypted formats. Additionally, active session tokens (Store Pairing Tokens) are written to the flash in plaintext, exposing live network credentials. |
| The NFC authentication handshake relies on a fixed, static challenge instead of a unique, random value for every session. This allows an attacker to perform a "replay attack," successfully authenticating by simply sending the same pre-recorded response. |
| The device's command parser does not require asymmetric cryptographic signatures to validate incoming APDU packets. This enables an attacker to inject forged, unauthorized commands to manipulate device features and configurations once the initial handshake is bypassed. |
| PMail 2.9.1 through 2.9.8 contains a stored cross-site scripting vulnerability because the /attachments/{id}/{cid} endpoint returns email attachments verbatim with the sender-supplied Content-Type after cid: references are rewritten into attachment links. Unauthenticated SMTP senders can email a text/html attachment and a page-covering cid link, so a recipient who clicks the message runs script in their webmail session to change passwords, including the administrator's. |
| Mitigation bypass in the File Handling component. This vulnerability was fixed in Firefox 160, Firefox ESR 153.7, Thunderbird 160, and Thunderbird 153.7. |
| Same-origin policy bypass in the DOM: Core & HTML component. This vulnerability was fixed in Firefox 160, Firefox ESR 153.7, Thunderbird 160, and Thunderbird 153.7. |
| Mitigation bypass in the SVG component. This vulnerability was fixed in Firefox 160 and Thunderbird 160. |
| The TouchOffice API `clerkList` endpoint appears to return sensitive clerk authentication data, including clerk PINs and iButton serial numbers. If the endpoint is accessible to callers who do not require access to these values, the API exposes reusable authentication material beyond the minimum information necessary for clerk-list functionality. |
| The PocketTouch and TouchPoint POS `CHECKPAYMENT` workflow accepts a caller-supplied clerk number without adequately verifying that the requesting client is authorized to act as that clerk.
An attacker with access to the POS protocol may be able to specify another employee’s clerk identifier and submit payment-related requests under that identity. |
| ICRTouch Commander administrative login interface does not adequately restrict repeated authentication attempts. The interface also returns distinguishable responses for multiple authentication states, including different behavior when a `siteID` value is supplied. |
| The wallet top-up functionality in ICRTouch ByTable and TouchTakeaway does not adequately protect state-changing requests against CSRF. An attacker-controlled website can cause an authenticated customer’s browser to submit a wallet top-up request and add an attacker-selected charge to the customer’s active cart. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: fix RCU list diversion in ip6_mc_del1_src()
When removing a source filter whose count reaches zero, ip6_mc_del1_src()
unlinks psf from pmc->mca_sources. If the filter was previously active,
the code moved psf directly into pmc->mca_tomb by updating psf->sf_next.
Because pmc->mca_sources is traversed locklessly under RCU (e.g. by
ipv6_chk_mcast_addr()), mutating psf->sf_next before a grace period
elapses diverts concurrent readers to the tombstone list. Consequently,
readers miss remaining active sources in pmc->mca_sources and improperly
examine deleted tombstone entries.
Fix this by allocating a new tombstone node for pmc->mca_tomb (as done
in sf_setstate()) and retiring the original psf via kfree_rcu(). |
| The order-tracking functionality in ICRTouch ByTable and TouchTakeaway does not adequately verify that a requester is authorized to access the specified order. An unauthenticated remote attacker can modify an order identifier to retrieve information associated with other customers’ orders. |
| ICRTouch PocketTouch version 1.700 build 2025.3726 contains a default socket password set to the literal value password. Where the default value remains unchanged and is accepted by a TouchPoint POS terminal, an attacker with network access to the terminal’s socket service may authenticate using publicly known credentials. |
| GPAC before 26.02.0 contains a type confusion vulnerability in ctxload_process() that passes non-object descriptors to ODS_SetupOD() without checking the descriptor tag. Attackers can supply a crafted XMT file with a URL-bearing descriptor that crashes MP4Box or other GPAC-based applications in gf_scene_ns_connect_object(), causing denial of service. |
| GPAC before 26.02.0 contains a NULL pointer dereference vulnerability in gf_dash_group_get_audio_channels() in src/media_tools/dash_client.c that allows attackers to crash applications via crafted DASH manifests. Attackers can supply an MPD whose AudioChannelConfiguration element omits schemeIdUri or value, crashing MP4Box or GPAC DASH clients and causing denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
igmp: convert struct ip_sf_list to RCU
Commit 23d2b94043ca ("igmp: Add ip_mc_list lock in ip_check_mc_rcu")
added spin_lock_bh(&im->lock) to ip_check_mc_rcu() to prevent a
use-after-free while iterating im->sources during concurrent deletions.
However, ip_check_mc_rcu() is called from RCU read-side critical
sections in packet receive and route lookup fast paths (e.g.
__mkroute_output(), ip_route_input_rcu(), and __udp4_lib_rcv()).
When igmpv3_send_cr() or igmpv3_send_report() holds &pmc->lock and
calls add_grec() -> igmpv3_newpack() -> ip_route_output_ports(),
an XFRM policy matching a multicast destination triggers
xfrm_tmpl_resolve_one() -> xfrm4_get_saddr() -> __mkroute_output() ->
ip_check_mc_rcu(). This attempts to acquire &im->lock while &pmc->lock
is already held on the same CPU, triggering a lockdep recursive locking
warning / deadlock.
Fix this by converting IPv4 struct ip_sf_list to RCU, mirroring the
IPv6 implementation in net/ipv6/mcast.c:
1. Add struct rcu_head to struct ip_sf_list and annotate sf_next,
sources, and tomb as __rcu pointers.
2. Use rcu_assign_pointer() and kfree_rcu() for list updates and
deletions.
3. Remove spin_lock_bh(&im->lock) from ip_check_mc_rcu() and traverse
im->sources locklessly with for_each_psf_rcu(), reading and writing
counter fields with READ_ONCE() and WRITE_ONCE().
Note: RCU conversion of /proc/net/mcfilter will be done in a
separate patch. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_u32: fix duplicate handle when node ID pool is exhausted
gen_new_kid() falls back to returning max (htid | 0xFFF) when both
idr_alloc_u32() ranges are full, instead of reporting an error.
u32_change() trusts that value and inserts a new knode with a handle
that is already live in the hash table, breaking handle uniqueness
within the table's node ID space.
The handle was never reserved in ht->handle_idr, so every later error
path that does idr_remove(&ht->handle_idr, handle) removes the
reservation of a different, live knode, which is then reused — one
failed add compounds into further duplicates.
The 4095 limit is per (table, bucket) — ht->handle_idr is per hash
table and the range is derived from htid (bucketid), so a table with
divisor 256 can legitimately hold 256*4095 knodes.
The sibling helper gen_new_htid() has the same silent in-band failure:
it returns 0 when the tp_c handle pool (1..0x7FF) is full, and
u32_init() publishes the root hash table with handle 0 without
checking. Two root tables with handle 0 alias in u32_lookup_ht(),
allowing cross-tcf_proto knode add/lookup/delete. Add the same
exhaustion check that the divisor path already has.
Return an error so u32_change() fails with ENOSPC/ENOMEM when the
node ID space is exhausted, and so u32_init() fails with -ENOMEM
when the hash table ID space is exhausted. The extack message
distinguishes pool exhaustion (-ENOSPC) from a transient allocation
failure (-ENOMEM).
Conditions to recreate the bug:
- CONFIG_NET_SCHED=y, CONFIG_CLS_U32=y (or =m with module loaded)
- Create a clsact qdisc on a device, then add 4095 u32 filters with
auto-generated handles to fill the node ID space for the root hash
table (single bucket). The 4096th auto-handle filter add triggers
the duplicate handle (fh 800::fff reused). Reachable at Level 2
(unshare -Urn, namespace-local CAP_NET_ADMIN).
- For gen_new_htid: create 2047 u32 proto entries on the same block
to fill the tp_c handle pool, then create one more. The root table
gets handle 0 and aliases with other handle-0 root tables. |