| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: Fix initial port reference race
For RFCOMM_RELEASE_ONHUP devices, rfcomm_tty_install() and
__rfcomm_release_dev() both use RFCOMM_TTY_OWNED to decide who drops the
initial tty_port reference. The release path tests the bit separately
from the install path setting it, so both can drop that reference.
The synchronous hangup does not prevent this race: port->tty is not
assigned until tty_port_open(), after installation. The following
interleaving is possible:
1. Install and release each obtain a reference with rfcomm_dev_get().
2. Release observes RFCOMM_TTY_OWNED clear.
3. Install sets RFCOMM_TTY_OWNED and drops the initial reference.
4. Release drops the same initial reference again.
5. TTY cleanup drops its reference and frees the device.
6. Release performs its final tty_port_put() on the freed port.
KASAN reported:
BUG: KASAN: slab-use-after-free in tty_port_put+0x22/0x190
Write of size 4 at addr ffff8881001d3d5c by task poc/92
Call Trace:
tty_port_put+0x22/0x190
rfcomm_dev_ioctl+0x1d4/0x1930
sock_do_ioctl+0x110/0x260
sock_ioctl+0x380/0x590
__x64_sys_ioctl+0x134/0x1c0
Allocated by task 88:
rfcomm_dev_ioctl+0x8f6/0x1930
sock_do_ioctl+0x110/0x260
sock_ioctl+0x380/0x590
__x64_sys_ioctl+0x134/0x1c0
Freed by task 65:
kfree+0x131/0x3c0
rfcomm_dev_destruct+0x23b/0x2f0
release_one_tty+0xc1/0x370
process_one_work+0x661/0x1090
Use test_and_set_bit() in both paths so that only the caller that changes
RFCOMM_TTY_OWNED from clear to set drops the initial reference. Each path
keeps its own lookup reference until release or TTY cleanup, preserving
the existing callback ordering and error handling. |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/altera: Drop __init from ECC setup paths for re-probe safety
Sashiko reports:
"Does suppressing sysfs unbinding fully prevent the execution of freed __init
memory? If altr_sysmgr_regmap_lookup_by_phandle() returns -EPROBE_DEFER, the
probe is deferred until after __init memory is freed."
The a10 EDAC .setup callbacks (sdmmc, ethernet, nand, dma, usb, qspi) and
their helpers (altr_init_a10_ecc_device_type, altr_init_a10_ecc_block) were
marked __init. These run from the probe path, which may execute after init
memory is freed -- e.g. a probe deferred via -EPROBE_DEFER that only succeeds
once a late/module dependency appears, or a manual unbind/rebind. Calling
__init code then dereferences freed memory. Remove __init so these functions
remain valid at runtime. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: abort break signalling on hangup
The break ioctls can race with hangup and end up calling into a tty
driver for a device that is already gone or powered down.
Drivers must handle this race, but TCSBRK and TCSBRKP should still be
aborted to avoid calling back into the driver after a user-controlled
timeout (possibly even after the tty has been reopened).
Note that drivers should disable any break state on shutdown so just
return on hangup (calling break_ctl() again is racy and will most likely
fail for drivers handling the race). |
| In the Linux kernel, the following vulnerability has been resolved:
tty: port: fix tty_port_tty_vhangup() race
Drivers rely on tty_port_tty_vhangup() to synchronously hang up their
ports before tearing down resources as part of deregistration (e.g. on
physical disconnect).
If tty_port_tty_vhangup() races with another hangup it may however
return before the port has been shut down. This is in turn can lead to
use-after-free and NULL-pointer dereferences in racing ioctls (including
a synchronous hangup) and in processing of racing asynchronous hangups
(carrier loss).
Add the missing serialisation to tty_port_tty_vhangup() and
tty_port_hangup() so that the former does not return until the port has
been shut down also when there is a racing hangup.
Note that serial core does not use tty_port_hangup(), but it already
holds the port mutex when clearing port->tty and shutting down the port
in uart_hangup(). |
| In the Linux kernel, the following vulnerability has been resolved:
tty: vcc: hold port lock when clearing tty pointer in vcc_cleanup
vcc_cleanup() sets port->tty to NULL without holding port->lock, racing
with vcc_event() LDC callbacks that read port->tty under port->lock and
then use tty->port. This can cause a use-after-free when the callback
dereferences tty->port after cleanup has already destroyed and freed it. |
| Vulnerability in Oracle Essbase (component: Security). The supported version that is affected is 21.8.3.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Essbase. While the vulnerability is in Oracle Essbase, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Essbase accessible data. CVSS 3.1 Base Score 7.7 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:N/A:N). |
| Use after free in Windows Win32 Kernel Subsystem allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows USB Print Driver allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Update allows an authorized attacker to elevate privileges locally. |
| Out-of-bounds read in Remote Desktop Display Driver allows an authorized attacker to disclose information locally. |
| Use after free in Windows TCP/IP allows an authorized attacker to elevate privileges locally. |
| Time-of-check time-of-use (toctou) race condition in Windows Win32 Kernel Subsystem allows an authorized attacker to disclose information locally. |
| Improper link resolution before file access ('link following') in Microsoft Windows Search Component allows an authorized attacker to elevate privileges locally. |
| Out-of-bounds read in Windows NTFS allows an authorized attacker to disclose information locally. |
| Missing Authorization vulnerability in Arraytics WP Event Solution wp-event-solution allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects WP Event Solution: from n/a through 4.1.26. |
| Missing Authorization vulnerability in Liquid Web / StellarWP BookIt bookit allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects BookIt: from n/a through 2.6.0.5. |
| In the Linux kernel, the following vulnerability has been resolved:
cxgb4/ch_ktls: disable softirqs around tid_list erases
chcr_ktls_cpl_act_open_rpl() inserts into tid_list from the receive path
using xa_insert_bh(). The array is shared by the adapter's connections
and initialized with XA_FLAGS_LOCK_BH. However, chcr_ktls_dev_del() and
the chcr_ktls_dev_add() error path use xa_erase(), which takes the XArray
lock without disabling softirqs.
When cleanup runs with softirqs enabled, a receive softirq for another
connection on the same CPU can interrupt the erase and spin on the lock
held by the interrupted task. Use xa_erase_bh() at both sites to match
the insertion path. |
| XDG Desktop Portal is a desktop integration portal. Prior to version 1.22.1, malicious sandboxed applications can use the FileTransfer.RetrieveFiles method to redirect drag-and-drop and copy-paste data targeted at other applications to itself. Some portals generate tokens which provide access to resources. The sharing of the token transfers access to the resource and is supposed to happen out of band. The tokens were generated with g_random_int or g_uuid_string_random, both of which use GLib's GRand based on the Mersenne Twister PRNG which created a stream of reproducible random numbers. By generating enough tokens, the state of the GRand can be recover and with it, the next tokens can be predictedinsufin. This issue has been patched in version 1.22.1. |
| LiteLLM is a proxy server (AI Gateway) to call LLM APIs in OpenAI (or native) format. From 1.87.0 until 1.100.4, 1.101.3, 1.102.2, 1.103.1, and 1.104.0-rc.2, the proxy reuses one cryptographic context for at-rest secrets and session tokens, allowing an authenticated internal user to have crafted metadata containing a forged administrator credential encrypted and returned by the API-key flow. Replaying that ciphertext as a bearer token causes the proxy to trust the forged proxy administrator identity, permitting administrative access and arbitrary commands through the MCP stdio endpoint. Versions 1.87.0 through 1.90.x require EXPERIMENTAL_UI_LOGIN to be enabled, while versions after 1.91.0 are exploitable in the default configuration. This issue was fixed in LiteLLM 1.100.4, 1.101.3, 1.102.2, 1.103.1, and 1.104.0-rc.2. |
| Avahi is a system which facilitates service discovery on a local network via the mDNS/DNS-SD protocol suite. In versions up to and including 0.9-rc5, the simple protocol server ignores the documented client limit and accepts unlimited connections, allowing for easy local DoS. Although `CLIENTS_MAX` is defined, `server_work()` unconditionally `accept()`s and `client_new()` always appends the new client and increments `n_clients`. There is no check against the limit. When client cannot be accepted as a result of maximal socket number of avahi-daemon, it logs unconditionally error per each connection. Unprivileged local users can exhaust daemon memory and file descriptors, causing a denial of service system-wide for mDNS/DNS-SD. Exhausting local file descriptors causes increased system load caused by logging errors of each of request. Overloading prevents glibc calls using nss-mdns plugins to resolve `*.local.` names and link-local addresses. As of time of publication, no known patched versions are available, but a candidate fix is available in pull request 808, and some workarounds are available. Simple clients are offered for nss-mdns package functionality. It is not possible to disable the unix socket `/run/avahi-daemon/socket`, but resolution requests received via DBus are not affected directly. Tools avahi-resolve, avahi-resolve-address and avahi-resolve-host-name are not affected, they use DBus interface. It is possible to change permissions of unix socket after avahi-daemon is started. But avahi-daemon does not provide any configuration for it. Additional access restrictions like SELinux can also prevent unwanted tools to access the socket and keep resolution working for trusted users. |
