| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: fix NOREF dst use in seg6 and rpl lwtunnels
seg6_input_core() and rpl_input() call ip6_route_input() which sets a
NOREF dst on the skb, then pass it to dst_cache_set_ip6() invoking
dst_hold() unconditionally.
On PREEMPT_RT, ksoftirqd is preemptible and a higher-priority task can
release the underlying pcpu_rt between the lookup and the caching
through a concurrent FIB lookup on a shared nexthop.
Simplified race sequence:
ksoftirqd/X higher-prio task (same CPU X)
----------- --------------------------------
seg6_input_core(,skb)/rpl_input(skb)
dst_cache_get()
-> miss
ip6_route_input(skb)
-> ip6_pol_route(,skb,flags)
[RT6_LOOKUP_F_DST_NOREF in flags]
-> FIB lookup resolves fib6_nh
[nhid=N route]
-> rt6_make_pcpu_route()
[creates pcpu_rt, refcount=1]
pcpu_rt->sernum = fib6_sernum
[fib6_sernum=W]
-> cmpxchg(fib6_nh.rt6i_pcpu,
NULL, pcpu_rt)
[slot was empty, store succeeds]
-> skb_dst_set_noref(skb, dst)
[dst is pcpu_rt, refcount still 1]
rt_genid_bump_ipv6()
-> bumps fib6_sernum
[fib6_sernum from W to Z]
ip6_route_output()
-> ip6_pol_route()
-> FIB lookup resolves fib6_nh
[nhid=N]
-> rt6_get_pcpu_route()
pcpu_rt->sernum != fib6_sernum
[W <> Z, stale]
-> prev = xchg(rt6i_pcpu, NULL)
-> dst_release(prev)
[prev is pcpu_rt,
refcount 1->0, dead]
dst = skb_dst(skb)
[dst is the dead pcpu_rt]
dst_cache_set_ip6(dst)
-> dst_hold() on dead dst
-> WARN / use-after-free
For the race to occur, ksoftirqd must be preemptible (PREEMPT_RT without
PREEMPT_RT_NEEDS_BH_LOCK) and a concurrent task must be able to release
the pcpu_rt. Shared nexthop objects provide such a path, as two routes
pointing to the same nhid share the same fib6_nh and its rt6i_pcpu
entry.
Fix seg6_input_core() and rpl_input() by calling skb_dst_force() after
ip6_route_input() to force the NOREF dst into a refcounted one before
caching.
The output path is not affected as ip6_route_output() already returns a
refcounted dst. |
| In the Linux kernel, the following vulnerability has been resolved:
net: caif: clear client service pointer on teardown
`caif_connect()` can tear down an existing client after remote shutdown by
calling `caif_disconnect_client()` followed by `caif_free_client()`.
`caif_free_client()` releases the service layer referenced by
`adap_layer->dn`, but leaves that pointer stale.
When the socket is later destroyed, `caif_sock_destructor()` calls
`caif_free_client()` again and dereferences the freed service pointer.
Clear the client/service links before releasing the service object so
repeated teardown becomes harmless. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: control: Validate buf_len before strnlen() in snd_ctl_elem_init_enum_names()
snd_ctl_elem_init_enum_names() advances pointer p through the names
buffer while decrementing buf_len. If buf_len reaches zero but items
remain, the next iteration calls strnlen(p, 0).
While strnlen(p, 0) returns 0 and would hit the existing name_len == 0
error path, CONFIG_FORTIFY_SOURCE's fortified strnlen() first checks
maxlen against __builtin_dynamic_object_size(). When Clang loses track
of p's object size inside the loop, this triggers a BRK exception panic
before the return value is examined.
Add a buf_len == 0 guard at the loop entry to prevent calling fortified
strnlen() on an exhausted buffer.
Found by kernel fuzz testing through Xiaomi Smartphone. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Inject #UD for INVLPGA if EFER.SVME=0
INVLPGA should cause a #UD when EFER.SVME is not set. Add a check to
properly inject #UD when EFER.SVME=0.
[sean: tag for stable@] |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: split transactions in dio completion to avoid credit exhaustion
During ocfs2 dio operations, JBD2 may report warnings via following
call trace:
ocfs2_dio_end_io_write
ocfs2_mark_extent_written
ocfs2_change_extent_flag
ocfs2_split_extent
ocfs2_try_to_merge_extent
ocfs2_extend_rotate_transaction
ocfs2_extend_trans
jbd2__journal_restart
start_this_handle
output: JBD2: kworker/6:2 wants too many credits credits:5450 rsv_credits:0 max:5449
To prevent exceeding the credits limit, modify ocfs2_dio_end_io_write() to
handle extents in a batch of transaction.
Additionally, relocate ocfs2_del_inode_from_orphan(). The orphan inode
should only be removed from the orphan list after the extent tree update
is complete. This ensures that if a crash occurs in the middle of extent
tree updates, we won't leave stale blocks beyond EOF.
This patch also changes the logic for updating the inode size and removing
orphan, making it similar to ext4_dio_write_end_io(). Both operations are
performed only when everything looks good.
Finally, thanks to Jans and Joseph for providing the bug fix prototype and
suggestions. |
| In the Linux kernel, the following vulnerability has been resolved:
rbd: fix null-ptr-deref when device_add_disk() fails
do_rbd_add() publishes the device with device_add() before calling
device_add_disk(). If device_add_disk() fails after device_add()
succeeds, the error path calls rbd_free_disk() directly and then later
falls through to rbd_dev_device_release(), which calls rbd_free_disk()
again. This double teardown can leave blk-mq cleanup operating on
invalid state and trigger a null-ptr-deref in
__blk_mq_free_map_and_rqs(), reached from blk_mq_free_tag_set().
Fix this by following the normal remove ordering: call device_del()
before rbd_dev_device_release() when device_add_disk() fails after
device_add(). That keeps the teardown sequence consistent and avoids
re-entering disk cleanup through the wrong path.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available.
We reproduced the bug on v7.0 with a real Ceph backend and a QEMU x86_64
guest booted with KASAN and CONFIG_FAILSLAB enabled. The reproducer
confines failslab injections to the __add_disk() range and injects
fail-nth while mapping an RBD image through
/sys/bus/rbd/add_single_major.
On the unpatched kernel, fail-nth=4 reliably triggered the fault:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 UID: 0 PID: 273 Comm: bash Not tainted 7.0.0-01247-gd60bc1401583 #6 PREEMPT(lazy)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:__blk_mq_free_map_and_rqs+0x8c/0x240
Code: 00 00 48 8b 6b 60 41 89 f4 49 c1 e4 03 4c 01 e5 45 85 ed 0f 85 0a 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 e9 48 c1 e9 03 <80> 3c 01 00 0f 85 31 01 00 00 4c 8b 6d 00 4d 85 ed 0f 84 e2 00 00
RSP: 0018:ff1100000ab0fac8 EFLAGS: 00000246
RAX: dffffc0000000000 RBX: ff1100000c4806a0 RCX: 0000000000000000
RDX: 0000000000000002 RSI: 0000000000000000 RDI: ff1100000c4806f4
RBP: 0000000000000000 R08: 0000000000000001 R09: ffe21c000189001b
R10: ff1100000c4800df R11: ff1100006cf37be0 R12: 0000000000000000
R13: 0000000000000000 R14: ff1100000c480700 R15: ff1100000c480004
FS: 00007f0fbe8fe740(0000) GS:ff110000e5851000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe53473b2e0 CR3: 0000000012eef000 CR4: 00000000007516f0
PKRU: 55555554
Call Trace:
<TASK>
blk_mq_free_tag_set+0x77/0x460
do_rbd_add+0x1446/0x2b80
? __pfx_do_rbd_add+0x10/0x10
? lock_acquire+0x18c/0x300
? find_held_lock+0x2b/0x80
? sysfs_file_kobj+0xb6/0x1b0
? __pfx_sysfs_kf_write+0x10/0x10
kernfs_fop_write_iter+0x2f4/0x4a0
vfs_write+0x98e/0x1000
? expand_files+0x51f/0x850
? __pfx_vfs_write+0x10/0x10
ksys_write+0xf2/0x1d0
? __pfx_ksys_write+0x10/0x10
do_syscall_64+0x115/0x690
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f0fbea15907
Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
RSP: 002b:00007ffe22346ea8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000058 RCX: 00007f0fbea15907
RDX: 0000000000000058 RSI: 0000563ace6c0ef0 RDI: 0000000000000001
RBP: 0000563ace6c0ef0 R08: 0000563ace6c0ef0 R09: 6b6435726d694141
R10: 5250337279762f78 R11: 0000000000000246 R12: 0000000000000058
R13: 00007f0fbeb1c780 R14: ff1100000c480700 R15: ff1100000c480004
</TASK>
With this fix applied, rerunning the reproducer over fail-nth=1..256
yields no KASAN reports.
[ idryomov: rename err_out_device_del -> err_out_device ] |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: atmel-tdes - fix DMA sync direction
Before DMA output is consumed by the CPU, ->dma_addr_out must be synced
with dma_sync_single_for_cpu() instead of dma_sync_single_for_device().
Using the wrong direction can return stale cache data on non-coherent
platforms. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: atmel-sha204a - Fix potential UAF and memory leak in remove path
Unregister the hwrng to prevent new ->read() calls and flush the Atmel
I2C workqueue before teardown to prevent a potential UAF if a queued
callback runs while the device is being removed.
Drop the early return to ensure sysfs entries are removed and
->hwrng.priv is freed, preventing a memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: add buffer boundary checks to run_unpack()
run_unpack() checks `run_buf < run_last` at the top of the while loop
but then reads size_size and offset_size bytes via run_unpack_s64()
without verifying they fit within the remaining buffer. A crafted NTFS
image with truncated run data in an MFT attribute triggers an OOB heap
read of up to 15 bytes when the filesystem is mounted.
Add boundary checks before each run_unpack_s64() call to ensure the
declared field size does not exceed the remaining buffer.
Found by fuzzing with a source-patched harness (LibAFL + QEMU). |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5: validate payload size before accessing journal metadata
r5c_recovery_analyze_meta_block() and
r5l_recovery_verify_data_checksum_for_mb() iterate over payloads in a
journal metadata block using on-disk payload size fields without
validating them against the remaining space in the metadata block.
A corrupted journal contains payload sizes extending beyond the PAGE_SIZE
boundary can cause out-of-bounds reads when accessing payload fields or
computing offsets.
Add bounds validation for each payload type to ensure the full payload
fits within meta_size before processing. |
| In the Linux kernel, the following vulnerability has been resolved:
ibmasm: fix heap over-read in ibmasm_send_i2o_message()
The ibmasm_send_i2o_message() function uses get_dot_command_size() to
compute the byte count for memcpy_toio(), but this value is derived from
user-controlled fields in the dot_command_header (command_size: u8,
data_size: u16) and is never validated against the actual allocation size.
A root user can write a small buffer with inflated header fields, causing
memcpy_toio() to read up to ~65 KB past the end of the allocation into
adjacent kernel heap, which is then forwarded to the service processor
over MMIO.
Silently clamping the copy size is not sufficient: if the header fields
claim a larger size than the buffer, the SP receives a dot command whose
own header is inconsistent with the I2O message length, which can cause
the SP to desynchronize. Reject such commands outright by returning
failure.
Validate command_size before calling get_mfa_inbound() to avoid leaking
an I2O message frame: reading INBOUND_QUEUE_PORT dequeues a hardware
frame from the controller's free pool, and returning without a
corresponding set_mfa_inbound() call would permanently exhaust it.
Additionally, clamp command_size to I2O_COMMAND_SIZE before the
memcpy_toio() so the MMIO write stays within the I2O message frame,
consistent with the clamping already performed by outgoing_message_size()
for the header field. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: fix integer overflow in run_unpack() volume boundary check
The volume boundary check `lcn + len > sbi->used.bitmap.nbits` uses raw
addition which can wrap around for large lcn and len values, bypassing
the validation. Use check_add_overflow() as is already done for the
adjacent prev_lcn + dlcn and vcn64 + len checks added by commit
3ac37e100385 ("ntfs3: Fix integer overflow in run_unpack()").
Found by fuzzing with a source-patched harness (LibAFL + QEMU). |
| In the Linux kernel, the following vulnerability has been resolved:
net: rds: fix MR cleanup on copy error
__rds_rdma_map() hands sg/pages ownership to the transport after
get_mr() succeeds. If copying the generated cookie back to user space
fails after that point, the error path must not free those resources
again before dropping the MR reference.
Remove the duplicate unpin/free from the put_user() failure branch so
that MR teardown is handled only through the existing final cleanup
path. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Validate pad and ICRC before payload_size() in rxe_rcv
rxe_rcv() currently checks only that the incoming packet is at least
header_size(pkt) bytes long before payload_size() is used.
However, payload_size() subtracts both the attacker-controlled BTH pad
field and RXE_ICRC_SIZE from pkt->paylen:
payload_size = pkt->paylen - offset[RXE_PAYLOAD] - bth_pad(pkt)
- RXE_ICRC_SIZE
This means a short packet can still make payload_size() underflow even
if it includes enough bytes for the fixed headers. Simply requiring
header_size(pkt) + RXE_ICRC_SIZE is not sufficient either, because a
packet with a forged non-zero BTH pad can still leave payload_size()
negative and pass an underflowed value to later receive-path users.
Fix this by validating pkt->paylen against the full minimum length
required by payload_size(): header_size(pkt) + bth_pad(pkt) +
RXE_ICRC_SIZE. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: icmp: validate reply type before using icmp_pointers
Extended echo replies use ICMP_EXT_ECHOREPLY as the outbound reply type.
That value is outside the range covered by icmp_pointers[], which only
describes the traditional ICMP types up to NR_ICMP_TYPES.
Avoid consulting icmp_pointers[] for reply types outside that range, and
use array_index_nospec() for the remaining in-range lookup. Normal ICMP
replies keep their existing behavior unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: call sk_data_ready() after listener migration
When inet_csk_listen_stop() migrates an established child socket from
a closing listener to another socket in the same SO_REUSEPORT group,
the target listener gets a new accept-queue entry via
inet_csk_reqsk_queue_add(), but that path never notifies the target
listener's waiters. A nonblocking accept() still works because it
checks the queue directly, but poll()/epoll_wait() waiters and
blocking accept() callers can also remain asleep indefinitely.
Call READ_ONCE(nsk->sk_data_ready)(nsk) after a successful migration
in inet_csk_listen_stop().
However, after inet_csk_reqsk_queue_add() succeeds, the ref acquired
in reuseport_migrate_sock() is effectively transferred to
nreq->rsk_listener. Another CPU can then dequeue nreq via accept()
or listener shutdown, hit reqsk_put(), and drop that listener ref.
Since listeners are SOCK_RCU_FREE, wrap the post-queue_add()
dereferences of nsk in rcu_read_lock()/rcu_read_unlock(), which also
covers the existing sock_net(nsk) access in that path.
The reqsk_timer_handler() path does not need the same changes for two
reasons: half-open requests become readable only after the final ACK,
where tcp_child_process() already wakes the listener; and once nreq is
visible via inet_ehash_insert(), the success path no longer touches
nsk directly. |
| In the Linux kernel, the following vulnerability has been resolved:
bareudp: fix NULL pointer dereference in bareudp_fill_metadata_dst()
bareudp_fill_metadata_dst() passes bareudp->sock to
udp_tunnel6_dst_lookup() in the IPv6 path without a NULL check.
The socket is only created in bareudp_open() and NULLed in
bareudp_stop(), so calling this function while the device is down
triggers a NULL dereference via sock->sk.
BUG: kernel NULL pointer dereference, address: 0000000000000018
RIP: 0010:udp_tunnel6_dst_lookup (net/ipv6/ip6_udp_tunnel.c:160)
Call Trace:
<TASK>
bareudp_fill_metadata_dst (drivers/net/bareudp.c:532)
do_execute_actions (net/openvswitch/actions.c:901)
ovs_execute_actions (net/openvswitch/actions.c:1589)
ovs_packet_cmd_execute (net/openvswitch/datapath.c:700)
genl_family_rcv_msg_doit (net/netlink/genetlink.c:1114)
genl_rcv_msg (net/netlink/genetlink.c:1209)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
</TASK>
Add a NULL check returning -ESHUTDOWN, consistent with the xmit paths
in the same driver. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: arp_tables: fix IEEE1394 ARP payload parsing
Weiming Shi says:
"arp_packet_match() unconditionally parses the ARP payload assuming two
hardware addresses are present (source and target). However,
IPv4-over-IEEE1394 ARP (RFC 2734) omits the target hardware address
field, and arp_hdr_len() already accounts for this by returning a
shorter length for ARPHRD_IEEE1394 devices.
As a result, on IEEE1394 interfaces arp_packet_match() advances past a
nonexistent target hardware address and reads the wrong bytes for both
the target device address comparison and the target IP address. This
causes arptables rules to match against garbage data, leading to
incorrect filtering decisions: packets that should be accepted may be
dropped and vice versa.
The ARP stack in net/ipv4/arp.c (arp_create and arp_process) already
handles this correctly by skipping the target hardware address for
ARPHRD_IEEE1394. Apply the same pattern to arp_packet_match()."
Mangle the original patch to always return 0 (no match) in case user
matches on the target hardware address which is never present in
IEEE1394.
Note that this returns 0 (no match) for either normal and inverse match
because matching in the target hardware address in ARPHRD_IEEE1394 has
never been supported by arptables. This is intentional, matching on the
target hardware address should never evaluate true for ARPHRD_IEEE1394.
Moreover, adjust arpt_mangle to drop the packet too as AI suggests:
In arpt_mangle, the logic assumes a standard ARP layout. Because
IEEE1394 (FireWire) omits the target hardware address, the linear
pointer arithmetic miscalculates the offset for the target IP address.
This causes mangling operations to write to the wrong location, leading
to packet corruption. To ensure safety, this patch drops packets
(NF_DROP) when mangling is requested for these fields on IEEE1394
devices, as the current implementation cannot correctly map the FireWire
ARP payload.
This omits both mangling target hardware and IP address. Even if IP
address mangling should be possible in IEEE1394, this would require
to adjust arpt_mangle offset calculation, which has never been
supported.
Based on patch from Weiming Shi <bestswngs@gmail.com>. |
| In the Linux kernel, the following vulnerability has been resolved:
slip: bound decode() reads against the compressed packet length
slhc_uncompress() parses a VJ-compressed TCP header by advancing a
pointer through the packet via decode() and pull16(). Neither helper
bounds-checks against isize, and decode() masks its return with
& 0xffff so it can never return the -1 that callers test for -- those
error paths are dead code.
A short compressed frame whose change byte requests optional fields
lets decode() read past the end of the packet. The over-read bytes
are folded into the cached cstate and reflected into subsequent
reconstructed packets.
Make decode() and pull16() take the packet end pointer and return -1
when exhausted. Add a bounds check before the TCP-checksum read.
The existing == -1 tests now do what they were always meant to. |
| In the Linux kernel, the following vulnerability has been resolved:
slip: reject VJ receive packets on instances with no rstate array
slhc_init() accepts rslots == 0 as a valid configuration, with the
documented meaning of 'no receive compression'. In that case the
allocation loop in slhc_init() is skipped, so comp->rstate stays
NULL and comp->rslot_limit stays 0 (from the kzalloc of struct
slcompress).
The receive helpers do not defend against that configuration.
slhc_uncompress() dereferences comp->rstate[x] when the VJ header
carries an explicit connection ID, and slhc_remember() later assigns
cs = &comp->rstate[...] after only comparing the packet's slot number
to comp->rslot_limit. Because rslot_limit is 0, slot 0 passes the
range check, and the code dereferences a NULL rstate.
The configuration is reachable in-tree through PPP. PPPIOCSMAXCID
stores its argument in a signed int, and (val >> 16) uses arithmetic
shift. Passing 0xffff0000 therefore sign-extends to -1, so val2 + 1
is 0 and ppp_generic.c ends up calling slhc_init(0, 1). Because
/dev/ppp open is gated by ns_capable(CAP_NET_ADMIN), the whole path
is reachable from an unprivileged user namespace. Once the malformed
VJ state is installed, any inbound VJ-compressed or VJ-uncompressed
frame that selects slot 0 crashes the kernel in softirq context:
Oops: general protection fault, probably for non-canonical
address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:slhc_uncompress (drivers/net/slip/slhc.c:519)
Call Trace:
<TASK>
ppp_receive_nonmp_frame (drivers/net/ppp/ppp_generic.c:2466)
ppp_input (drivers/net/ppp/ppp_generic.c:2359)
ppp_async_process (drivers/net/ppp/ppp_async.c:492)
tasklet_action_common (kernel/softirq.c:926)
handle_softirqs (kernel/softirq.c:623)
run_ksoftirqd (kernel/softirq.c:1055)
smpboot_thread_fn (kernel/smpboot.c:160)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:164)
</TASK>
Reject the receive side on such instances instead of touching rstate.
slhc_uncompress() falls through to its existing 'bad' label, which
bumps sls_i_error and enters the toss state. slhc_remember() mirrors
that with an explicit sls_i_error increment followed by slhc_toss();
the sls_i_runt counter is not used here because a missing rstate is
an internal configuration state, not a runt packet.
The transmit path is unaffected: the only in-tree caller that picks
rslots from userspace (ppp_generic.c) still supplies tslots >= 1, and
slip.c always calls slhc_init(16, 16), so comp->tstate remains valid
and slhc_compress() continues to work. |
