| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw has been found in kylecui NetForensicMCP 2.1.0. Impacted is the function execAsync of the file index.js. Executing a manipulation of the argument interface/protocol can lead to command injection. The attack may be launched remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix mrec_lock ABBA deadlock in rename
ntfs_file_fsync(), ntfs_dir_fsync() and __ntfs_write_inode() lock an
inode's mrec_lock before taking the mrec_lock of its parent directory.
ntfs_rename() takes old_ni->mrec_lock and old_dir_ni->mrec_lock
before taking new_ni->mrec_lock for an existing target, or
new_dir_ni->mrec_lock for a cross-directory rename.
This can deadlock when ntfs_file_fsync() or __ntfs_write_inode() holds
the target inode, or when ntfs_dir_fsync() holds a child target
directory, while rename() holds the parent directory and waits for the
target.
Fix this by locking the existing target inode before taking any parent
directory mrec_lock. For cross-directory renames where the target parent
is a descendant of the source parent, lock the target parent before the
source parent so the directory order matches the child-to-parent order used
by ntfs_file_fsync(), ntfs_dir_fsync(), and __ntfs_write_inode(). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free of conn->preauth_info in concurrent SMB2 NEGOTIATE
conn->preauth_info is shared connection state (struct
preauth_integrity_info, kmalloc-96) that is allocated and freed by the
SMB2 NEGOTIATE handler and read by the response send path.
smb2_handle_negotiate() allocates conn->preauth_info, and on a
deassemble_neg_contexts() failure kfrees it and sets it to NULL. Both the
allocation and the free/NULL happen under ksmbd_conn_lock(conn) (the
connection srv_mutex), which is held across the whole handler body.
The response send path smb3_preauth_hash_rsp(), called from the send:
block of __handle_ksmbd_work(), reads conn->preauth_info and dereferences
conn->preauth_info->Preauth_HashValue (via
ksmbd_gen_preauth_integrity_hash()) without taking conn_lock. When a
client drives two SMB2 NEGOTIATE requests on the same connection, one
worker can free conn->preauth_info on the failing-negotiate path while a
concurrent send-path worker is reading it, producing a slab
use-after-free read (KASAN-confirmed).
The send-path read tested conn->preauth_info for NULL but raced with the
free that occurs between the NULL check and the dereference, so the NULL
guard alone does not close the window.
Serialize the NEGOTIATE-branch read in smb3_preauth_hash_rsp() under
ksmbd_conn_lock(conn) and re-check conn->preauth_info inside the lock.
Because the negotiate handler holds conn_lock across its kfree + NULL
assignment, a reader that also takes conn_lock either runs fully before
the allocation or fully after the NULL store, and can never observe the
freed-but-not-yet-NULLed pointer. ksmbd_gen_preauth_integrity_hash()
takes no locks itself (it only computes a SHA-512 over the buffer), so
no lock-ordering inversion is introduced, and conn_lock is a sleepable
mutex which is safe on this send path (it already performs network I/O). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Guard conntrack opts error writes
The conntrack lookup and allocation kfuncs take an opts pointer
together with an opts__sz argument. The verifier checks only the memory
range described by opts__sz, but the wrappers unconditionally write
opts->error whenever the internal lookup or allocation helper returns an
error.
For an invalid size smaller than the end of opts->error, that write can
land outside the verifier-checked range. Keep returning NULL for invalid
arguments, but only report the error through opts->error when the
supplied size includes the field.
This preserves error reporting for the supported 12-byte and 16-byte
layouts, and for other invalid sizes that still include opts->error. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: resize log->one_page_buf when adopting on-disk page size
log_replay() allocates log->one_page_buf using the page size that was
chosen from the host PAGE_SIZE:
log->one_page_buf = kmalloc(log->page_size, GFP_NOFS);
Later, when a restart area is found, the log page size recorded on disk
is adopted:
t32 = le32_to_cpu(log->rst_info.r_page->sys_page_size);
if (log->page_size != t32) {
log->l_size = log->orig_file_size;
log->page_size = norm_file_page(t32, &log->l_size,
t32 == DefaultLogPageSize);
}
If the on-disk page size is larger than the size used for the initial
allocation, log->page_size grows but one_page_buf is left at its
original, smaller size. A subsequent unaligned read_log_page() then
reads log->page_size bytes into the undersized scratch buffer:
page_buf = page_off ? log->one_page_buf : *buffer;
err = ntfs_read_run_nb_ra(ni->mi.sbi, &ni->file.run, page_vbo, page_buf,
log->page_size, NULL, &log->read_ahead);
overflowing the allocation. This is reachable when mounting a dirty
NTFS volume whose log was formatted with a page size larger than the
buffer initially allocated on the mounting host (for example a 64K-log
volume mounted on a host that allocated a 4K scratch buffer).
Grow one_page_buf when the adopted on-disk page size exceeds the size
used for the initial allocation. On krealloc() failure the original
buffer is left intact and freed by the existing error path. |
| In JetBrains YouTrack before 2026.1.13901,
2026.2.17950 doS attack was possible via crafted type parameters |
| In JetBrains IntelliJ IDEA before 2026.2.1 sSRF was possible via the DevKit debug listener endpoint |
| In JetBrains IntelliJ IDEA before 2026.1.5 git credentials were written in plaintext to the IDE log |
| TIER IV Nebula through 1.2.0 contains an out-of-bounds read vulnerability in the Vlp32Decoder::unpack() function that allows unauthenticated remote attackers to cause the decoder to read past the end of a received UDP buffer into adjacent heap memory by sending a short UDP datagram. Attackers can send a malformed datagram to the Velodyne UDP sensor port, which lacks sender-address restrictions present in other drivers, causing fabricated points derived from heap memory contents to be silently published into downstream PointCloud2 messages consumed by Autoware nodes. |
| IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.8 IBM WebSphere Application Server Liberty is vulnerable to an authentication bypass when the rtcomm-1.0 or rtcommGateway-1.0 feature is enabled. |
| A race condition in the Apache Kafka Java producer client’s buffer pool management can cause messages to be silently delivered to incorrect topics.
When a produce batch expires due to delivery.timeout.ms while a network request containing that batch is still in flight, the batch’s ByteBuffer is prematurely deallocated and returned to the buffer pool. If a subsequent producer batch—potentially destined for a different topic—reuses this freed buffer before the original network request completes, the buffer contents may become corrupted. This can result in messages being delivered to unintended topics without any error being reported to the producer.
Data Confidentiality:
Messages intended for one topic may be delivered to a different topic, potentially exposing sensitive data to consumers who have access to the destination topic but not the intended source topic.
Data Integrity:
Consumers on the receiving topic may encounter unexpected or incompatible messages, leading to deserialization failures, processing errors, and corrupted downstream data.
This issue affects Apache Kafka versions ≤ 3.9.1, ≤ 4.0.1, and ≤ 4.1.1.
Kafka users are advised to upgrade to 3.9.2, 4.0.2, 4.1.2, 4.2.0, or later to address this vulnerability. |
| Remote Code Execution via Arbitrary Class Instantiation in plugin-schema-registry component in Apache Ranger <= 2.8.0.
Users are recommended to upgrade to version 2.9.0, which fixes this issue. |
| cryptodev-linux version 1.14 and prior contain a page reference handling flaw in the get_userbuf function of the /dev/crypto device driver that allows local users to trigger use-after-free conditions. Attackers with access to the /dev/crypto interface can repeatedly decrement reference counts of controlled pages to achieve local privilege escalation. |
| In JetBrains YouTrack before 2025.3.156085,
2026.1.13914,
2026.2.18095 missing authorisation allowed an authenticated user to delete arbitrary entities via the mailbox endpoint |
| In JetBrains YouTrack before 2026.2.18177 doS attack was possible via a decompression bomb in the import endpoint |
| In JetBrains YouTrack before 2026.2.18068 stored XSS via the fenced code-block language label was possible |
| In JetBrains YouTrack before 2026.1.13903,
2026.2.17950 an authenticated user could read restricted articles from other projects via the draft creation endpoint |
| In JetBrains IntelliJ IDEA before 2026.2.1 hadoop ResourceManager could read local files via XXE |
| In JetBrains IntelliJ IDEA before 2026.2.1 rCE via Markdown export tool was possible |
| In JetBrains PyCharm before 2026.2.1 code execution via Quick Documentation was possible |
