| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: pnv_php: Fix surprise plug detection and recovery
The existing PowerNV hotplug code did not handle surprise plug events
correctly, leading to a complete failure of the hotplug system after device
removal and a required reboot to detect new devices.
This comes down to two issues:
1) When a device is surprise removed, often the bridge upstream
port will cause a PE freeze on the PHB. If this freeze is not
cleared, the MSI interrupts from the bridge hotplug notification
logic will not be received by the kernel, stalling all plug events
on all slots associated with the PE.
2) When a device is removed from a slot, regardless of surprise or
programmatic removal, the associated PHB/PE ls left frozen.
If this freeze is not cleared via a fundamental reset, skiboot
is unable to clear the freeze and cannot retrain / rescan the
slot. This also requires a reboot to clear the freeze and redetect
the device in the slot.
Issue the appropriate unfreeze and rescan commands on hotplug events,
and don't oops on hotplug if pci_bus_to_OF_node() returns NULL.
[bhelgaas: tidy comments] |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: pnv_php: Clean up allocated IRQs on unplug
When the root of a nested PCIe bridge configuration is unplugged, the
pnv_php driver leaked the allocated IRQ resources for the child bridges'
hotplug event notifications, resulting in a panic.
Fix this by walking all child buses and deallocating all its IRQ resources
before calling pci_hp_remove_devices().
Also modify the lifetime of the workqueue at struct pnv_php_slot::wq so
that it is only destroyed in pnv_php_free_slot(), instead of
pnv_php_disable_irq(). This is required since pnv_php_disable_irq() will
now be called by workers triggered by hot unplug interrupts, so the
workqueue needs to stay allocated.
The abridged kernel panic that occurs without this patch is as follows:
WARNING: CPU: 0 PID: 687 at kernel/irq/msi.c:292 msi_device_data_release+0x6c/0x9c
CPU: 0 UID: 0 PID: 687 Comm: bash Not tainted 6.14.0-rc5+ #2
Call Trace:
msi_device_data_release+0x34/0x9c (unreliable)
release_nodes+0x64/0x13c
devres_release_all+0xc0/0x140
device_del+0x2d4/0x46c
pci_destroy_dev+0x5c/0x194
pci_hp_remove_devices+0x90/0x128
pci_hp_remove_devices+0x44/0x128
pnv_php_disable_slot+0x54/0xd4
power_write_file+0xf8/0x18c
pci_slot_attr_store+0x40/0x5c
sysfs_kf_write+0x64/0x78
kernfs_fop_write_iter+0x1b0/0x290
vfs_write+0x3bc/0x50c
ksys_write+0x84/0x140
system_call_exception+0x124/0x230
system_call_vectored_common+0x15c/0x2ec
[bhelgaas: tidy comments] |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: imxfb: Check fb_add_videomode to prevent null-ptr-deref
fb_add_videomode() can fail with -ENOMEM when its internal kmalloc() cannot
allocate a struct fb_modelist. If that happens, the modelist stays empty but
the driver continues to register. Add a check for its return value to prevent
poteintial null-ptr-deref, which is similar to the commit 17186f1f90d3 ("fbdev:
Fix do_register_framebuffer to prevent null-ptr-deref in fb_videomode_to_var"). |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: cpcap-charger: Fix null check for power_supply_get_by_name
In the cpcap_usb_detect() function, the power_supply_get_by_name()
function may return `NULL` instead of an error pointer.
To prevent potential null pointer dereferences, Added a null check. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: davinci: Add NULL check in davinci_lpsc_clk_register()
devm_kasprintf() returns NULL when memory allocation fails. Currently,
davinci_lpsc_clk_register() does not check for this case, which results
in a NULL pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue and ensuring
no resources are left allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: interface: fix use-after-free after changing collect_md xfrm interface
collect_md property on xfrm interfaces can only be set on device creation,
thus xfrmi_changelink() should fail when called on such interfaces.
The check to enforce this was done only in the case where the xi was
returned from xfrmi_locate() which doesn't look for the collect_md
interface, and thus the validation was never reached.
Calling changelink would thus errornously place the special interface xi
in the xfrmi_net->xfrmi hash, but since it also exists in the
xfrmi_net->collect_md_xfrmi pointer it would lead to a double free when
the net namespace was taken down [1].
Change the check to use the xi from netdev_priv which is available earlier
in the function to prevent changes in xfrm collect_md interfaces.
[1] resulting oops:
[ 8.516540] kernel BUG at net/core/dev.c:12029!
[ 8.516552] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[ 8.516559] CPU: 0 UID: 0 PID: 12 Comm: kworker/u80:0 Not tainted 6.15.0-virtme #5 PREEMPT(voluntary)
[ 8.516565] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 8.516569] Workqueue: netns cleanup_net
[ 8.516579] RIP: 0010:unregister_netdevice_many_notify+0x101/0xab0
[ 8.516590] Code: 90 0f 0b 90 48 8b b0 78 01 00 00 48 8b 90 80 01 00 00 48 89 56 08 48 89 32 4c 89 80 78 01 00 00 48 89 b8 80 01 00 00 eb ac 90 <0f> 0b 48 8b 45 00 4c 8d a0 88 fe ff ff 48 39 c5 74 5c 41 80 bc 24
[ 8.516593] RSP: 0018:ffffa93b8006bd30 EFLAGS: 00010206
[ 8.516598] RAX: ffff98fe4226e000 RBX: ffffa93b8006bd58 RCX: ffffa93b8006bc60
[ 8.516601] RDX: 0000000000000004 RSI: 0000000000000000 RDI: dead000000000122
[ 8.516603] RBP: ffffa93b8006bdd8 R08: dead000000000100 R09: ffff98fe4133c100
[ 8.516605] R10: 0000000000000000 R11: 00000000000003d2 R12: ffffa93b8006be00
[ 8.516608] R13: ffffffff96c1a510 R14: ffffffff96c1a510 R15: ffffa93b8006be00
[ 8.516615] FS: 0000000000000000(0000) GS:ffff98fee73b7000(0000) knlGS:0000000000000000
[ 8.516619] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8.516622] CR2: 00007fcd2abd0700 CR3: 000000003aa40000 CR4: 0000000000752ef0
[ 8.516625] PKRU: 55555554
[ 8.516627] Call Trace:
[ 8.516632] <TASK>
[ 8.516635] ? rtnl_is_locked+0x15/0x20
[ 8.516641] ? unregister_netdevice_queue+0x29/0xf0
[ 8.516650] ops_undo_list+0x1f2/0x220
[ 8.516659] cleanup_net+0x1ad/0x2e0
[ 8.516664] process_one_work+0x160/0x380
[ 8.516673] worker_thread+0x2aa/0x3c0
[ 8.516679] ? __pfx_worker_thread+0x10/0x10
[ 8.516686] kthread+0xfb/0x200
[ 8.516690] ? __pfx_kthread+0x10/0x10
[ 8.516693] ? __pfx_kthread+0x10/0x10
[ 8.516697] ret_from_fork+0x82/0xf0
[ 8.516705] ? __pfx_kthread+0x10/0x10
[ 8.516709] ret_from_fork_asm+0x1a/0x30
[ 8.516718] </TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: configfs: Fix OOB read on empty string write
When writing an empty string to either 'qw_sign' or 'landingPage'
sysfs attributes, the store functions attempt to access page[l - 1]
before validating that the length 'l' is greater than zero.
This patch fixes the vulnerability by adding a check at the beginning
of os_desc_qw_sign_store() and webusb_landingPage_store() to handle
the zero-length input case gracefully by returning immediately. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: aspeed: lpc-snoop: Don't disable channels that aren't enabled
Mitigate e.g. the following:
# echo 1e789080.lpc-snoop > /sys/bus/platform/drivers/aspeed-lpc-snoop/unbind
...
[ 120.363594] Unable to handle kernel NULL pointer dereference at virtual address 00000004 when write
[ 120.373866] [00000004] *pgd=00000000
[ 120.377910] Internal error: Oops: 805 [#1] SMP ARM
[ 120.383306] CPU: 1 UID: 0 PID: 315 Comm: sh Not tainted 6.15.0-rc1-00009-g926217bc7d7d-dirty #20 NONE
...
[ 120.679543] Call trace:
[ 120.679559] misc_deregister from aspeed_lpc_snoop_remove+0x84/0xac
[ 120.692462] aspeed_lpc_snoop_remove from platform_remove+0x28/0x38
[ 120.700996] platform_remove from device_release_driver_internal+0x188/0x200
... |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: fxls8962af: Fix use after free in fxls8962af_fifo_flush
fxls8962af_fifo_flush() uses indio_dev->active_scan_mask (with
iio_for_each_active_channel()) without making sure the indio_dev
stays in buffer mode.
There is a race if indio_dev exits buffer mode in the middle of the
interrupt that flushes the fifo. Fix this by calling
synchronize_irq() to ensure that no interrupt is currently running when
disabling buffer mode.
Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read
[...]
_find_first_bit_le from fxls8962af_fifo_flush+0x17c/0x290
fxls8962af_fifo_flush from fxls8962af_interrupt+0x80/0x178
fxls8962af_interrupt from irq_thread_fn+0x1c/0x7c
irq_thread_fn from irq_thread+0x110/0x1f4
irq_thread from kthread+0xe0/0xfc
kthread from ret_from_fork+0x14/0x2c |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: das16m1: Fix bit shift out of bounds
When checking for a supported IRQ number, the following test is used:
/* only irqs 2, 3, 4, 5, 6, 7, 10, 11, 12, 14, and 15 are valid */
if ((1 << it->options[1]) & 0xdcfc) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: das6402: Fix bit shift out of bounds
When checking for a supported IRQ number, the following test is used:
/* IRQs 2,3,5,6,7, 10,11,15 are valid for "enhanced" mode */
if ((1 << it->options[1]) & 0x8cec) {
However, `it->options[i]` is an unchecked `int` value from userspace, so
the shift amount could be negative or out of bounds. Fix the test by
requiring `it->options[1]` to be within bounds before proceeding with
the original test. Valid `it->options[1]` values that select the IRQ
will be in the range [1,15]. The value 0 explicitly disables the use of
interrupts. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: Fail COMEDI_INSNLIST ioctl if n_insns is too large
The handling of the `COMEDI_INSNLIST` ioctl allocates a kernel buffer to
hold the array of `struct comedi_insn`, getting the length from the
`n_insns` member of the `struct comedi_insnlist` supplied by the user.
The allocation will fail with a WARNING and a stack dump if it is too
large.
Avoid that by failing with an `-EINVAL` error if the supplied `n_insns`
value is unreasonable.
Define the limit on the `n_insns` value in the `MAX_INSNS` macro. Set
this to the same value as `MAX_SAMPLES` (65536), which is the maximum
allowed sum of the values of the member `n` in the array of `struct
comedi_insn`, and sensible comedi instructions will have an `n` of at
least 1. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: Fix use of uninitialized data in insn_rw_emulate_bits()
For Comedi `INSN_READ` and `INSN_WRITE` instructions on "digital"
subdevices (subdevice types `COMEDI_SUBD_DI`, `COMEDI_SUBD_DO`, and
`COMEDI_SUBD_DIO`), it is common for the subdevice driver not to have
`insn_read` and `insn_write` handler functions, but to have an
`insn_bits` handler function for handling Comedi `INSN_BITS`
instructions. In that case, the subdevice's `insn_read` and/or
`insn_write` function handler pointers are set to point to the
`insn_rw_emulate_bits()` function by `__comedi_device_postconfig()`.
For `INSN_WRITE`, `insn_rw_emulate_bits()` currently assumes that the
supplied `data[0]` value is a valid copy from user memory. It will at
least exist because `do_insnlist_ioctl()` and `do_insn_ioctl()` in
"comedi_fops.c" ensure at lease `MIN_SAMPLES` (16) elements are
allocated. However, if `insn->n` is 0 (which is allowable for
`INSN_READ` and `INSN_WRITE` instructions, then `data[0]` may contain
uninitialized data, and certainly contains invalid data, possibly from a
different instruction in the array of instructions handled by
`do_insnlist_ioctl()`. This will result in an incorrect value being
written to the digital output channel (or to the digital input/output
channel if configured as an output), and may be reflected in the
internal saved state of the channel.
Fix it by returning 0 early if `insn->n` is 0, before reaching the code
that accesses `data[0]`. Previously, the function always returned 1 on
success, but it is supposed to be the number of data samples actually
read or written up to `insn->n`, which is 0 in this case. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: reject TDLS operations when station is not associated
syzbot triggered a WARN in ieee80211_tdls_oper() by sending
NL80211_TDLS_ENABLE_LINK immediately after NL80211_CMD_CONNECT,
before association completed and without prior TDLS setup.
This left internal state like sdata->u.mgd.tdls_peer uninitialized,
leading to a WARN_ON() in code paths that assumed it was valid.
Reject the operation early if not in station mode or not associated. |
| There is a stored cross site scripting issue in Esri ArcGIS Server 11.4 and earlier on Windows and Linux that in some configurations allows a remote unauthenticated attacker to store files that contain malicious code that may execute in the context of a victim’s browser. |
| There is a stored cross site scripting issue in Esri ArcGIS Server 11.4 and earlier on Windows and Linux that in some configurations allows a remote unauthenticated attacker to store files that contain malicious code that may execute in the context of a victim’s browser. |
| There is a stored cross site scripting issue in Esri ArcGIS Server 11.4 and earlier on Windows and Linux that in some configurations allows a remote unauthenticated attacker to store files that contain malicious code that may execute in the context of a victim’s browser. |
| There is a stored cross site scripting issue in Esri ArcGIS Server 11.4 and earlier on Windows and Linux that in some configurations allows a remote unauthenticated attacker to store files that contain malicious code that may execute in the context of a victim’s browser. |
| There is a stored cross site scripting issue in Esri ArcGIS Server 11.4 and earlier on Windows and Linux that in some configurations allows a remote unauthenticated attacker to store files that contain malicious code that may execute in the context of a victim’s browser. |
| There is a stored cross site scripting issue in Esri ArcGIS Server 11.4 and earlier on Windows and Linux that in some configurations allows a remote unauthenticated attacker to store files that contain malicious code that may execute in the context of a victim’s browser. |
