| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Custom Field Template plugin for WordPress is vulnerable to generic SQL Injection via the 'post_ID' parameter in all versions up to, and including, 2.7.8 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with contributor-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. The capability check via current_user_can('edit_post', $id) is bypassable because WordPress internally casts $id to an integer for the permission evaluation while the full unsanitized string is preserved and passed to the SQL sink, and a valid nonce — which is also required — can be legitimately obtained by any Contributor-level user from the post edit screen. |
| The Redux Framework plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the spinner field in versions up to, and including, 4.5.13 This is due to insufficient input sanitization and output escaping. In the user_meta_save() function scalar values bypass the sanitization logic that only processes arrays, allowing the spinner field value to be stored in user meta without proper sanitization. Later, at line 56 of class-redux-spinner.php in the render() function, this value is rendered in an unquoted HTML attribute without escaping via '$data_string .= ' data-val=' . $this->value;'. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx6: Use PFP on the compute queues too
On GFX6, the compute rings use the same CP path as
the graphics ring. The only difference is that they
don't support draw commands. (As opposed to GFX7 and
newer which have a separate command parser that is
called MEC for compute queues.)
This means that we have to take into consideration
that the PFP also exists on compute queues on GFX6:
Use PFP for register writes on both graphics and
compute queues.
In the pipeline sync, use the PFP to wait for the
previous fence (and not the ME) to prevent the PFP
from starting to execute the next submission while
the ME is still in the previous submission.
After a VM flush, emit PFP_SYNC_ME on compute
queues as well. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: hibernate: Restore DAIF state on error
Sashiko AI has reported that if swsusp_mte_save_tags() for some reason
fails we return from swsusp_arch_suspend() with DAIF being masked -
that is not what we'd expect. Restore the saved DAIF state before
returning from the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
module/dups: Fix use-after-free in kmod_dup_req lifetime handling
The kmod dups code uses RCU to ensure that a kmod_dup_req instance is freed
only after it is no longer referenced. When releasing an instance, the
kmod_dup_request_delete() function removes the kmod_dup_req from the
dup_kmod_reqs list, waits via synchronize_rcu() and finally frees it.
However, this doesn't work correctly because parallel users referencing the
instance in kmod_dup_request_exists_wait() don't enter an RCU read-side
critical section. This can result in a use-after-free.
The kmod_dup_request_exists_wait() function may need to hold a valid
reference to a kmod_dup_req instance across a blocking wait until the
corresponding modprobe command completes. This makes it unsuitable for RCU.
Fix the issue by changing the lifecycle management of kmod_dup_req to use
reference counting. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Fix use-after-free in siw_accept()
siw_accept() looks up the QP supplied by userspace. If that QP is
already in RTS, the function jumps to error cleanup before associating
the incoming CEP with it.
The cleanup tests whether qp->cep is non-NULL and assumes the current
call installed the association. However, qp->cep can point to the CEP
of an existing connection. The cleanup then drops a reference from the
incoming cep, not qp->cep. Once the incoming endpoint loses its
remaining references, this can free it before the subsequent cep->qp
store, causing a use-after-free. It also clears the existing QP
association.
Only release the association reference when qp->cep is the incoming
CEP. This preserves an existing association and avoids accessing the
freed endpoint. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/isert: post the full-feature receive buffers after session registration
isert_put_login_tx() posts the full-feature receive buffers before
__transport_register_session() runs, so an initiator that does not wait
for the final Login Response can still have a SCSI command executed
against an se_session whose se_tpg is NULL - the same oops as the
previous patch, at target_submit+0xbe.
Post them from isert_get_rx_pdu(), which the previous patch already uses
to send that response, and post them before that send: the receive queue
is filled at the moment the initiator is told it may use it. Allocating
there keeps the existing property that a memory allocation failure cannot
happen once the final Login Response is on the wire.
The receive queue is already empty between the final Login Request and
isert_post_recvm(); this moves the second point later, from a median of
92 us to 172 us over 1200 logins. Only an initiator that sends before it
has been told to can reach that window, and on IB and RoCE its send is
retried there until the buffers appear - isert_rdma_accept() asks for
rnr_retry_count = 7. iWARP has no RNR flow control, so there the same
send terminates the connection instead.
Measured over rxe, 400 login cycles per run, with an initiator that does
not wait: an instrumented build counted no entries to isert_recv_done()
before the buffers are posted in 10 runs, where that initiator oopsed
8 of 10 unpatched runs and 5 of 10 with only the previous patch.
Not tested: iWARP, discovery sessions over iSER, and real HCAs. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sun4i: crtc: Propagate layer initialization error
sun4i_crtc_init() returns plain NULL when layer initialization fails,
while all its other error paths return an error pointer. The only
caller, sun4i_tcon_bind(), checks the result with IS_ERR() and happily
continues with tcon->crtc set to NULL. sun4i_rgb_init() and
sun4i_lvds_init() then dereference it in drm_crtc_mask(), which
oopses.
Return the error pointer instead. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sun4i: tcon: Drop TCON TOP device reference
of_find_device_by_node() takes a device reference. Drop it after mux
configuration succeeds. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/erdma: Hold QP references for AE and CM processing
AE QP fatal events and iWARP CM paths load QPs from dev->qp_xa
and then use or reference them outside the xarray lock.
erdma_destroy_qp() can drop the destroy-path reference and free QP
resources while such a lookup is in flight.
Add erdma_qp_get_by_qpn() to acquire a kref under the xarray
lock with kref_get_unless_zero(). Remove the QP from the xarray
before dropping the destroy-path reference so no new lookup can acquire
it while destruction waits for existing users. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: steam: Reject short reads
Steam Controller FEATURE reports encode the size of the message in the
message itself. Previously we were trusting that the size reported matched
the size we actually read, leading to a potential issue with short reads.
Instead, we should actually verify the length of the read. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix WARNING in bpf_tracing_link_release
The trampoline could be corrupted by the blindly
'tr->flags = BPF_TRAMP_F_TAIL_CALL_CTX' in verifier.
1. A fexit attached to a tail_call_reachable prog. 'tr->flags' became
'BPF_TRAMP_F_CALL_ORIG | BPF_TRAMP_F_TAIL_CALL_CTX'. And, the
trampoline would poke the target prog's nop insn using jmp insn instead
of call insn.
2. Another fexit loaded with the same tail_call_reachable prog target.
'tr->flags' became 'BPF_TRAMP_F_TAIL_CALL_CTX'.
3. Close the first fexit link. Due to no BPF_TRAMP_F_CALL_ORIG in
'tr->flags', the trampoline will fail to restore the prog's nop insn
using call insn.
[ 3.410719] WARNING: kernel/bpf/syscall.c:3551 at bpf_tracing_link_release+0x53/0x60, CPU#1: test_progs/98
...
[ 3.428793] bpf_link_free+0x58/0x130
[ 3.429293] bpf_link_release+0x23/0x30
Fix the warning by updating 'tr->flags' with '|=' and lock. |
| The Botiga Pro WordPress plugin before 1.6.5 does not perform any authorisation checks on one of its REST routes, allowing unauthenticated users to update arbitrary WordPress options with arbitrary values, which could lead to privilege escalation and a full site takeover.
The same route also allows unauthenticated users to store arbitrary web scripts which are then executed on every page of the site's front end, as well as to move arbitrary posts to the trash. |
| The Secure Custom Fields WordPress plugin before 6.9.4 does not properly verify that a front-end form submission corresponds to the form that was rendered to the visitor, allowing unauthenticated users to submit against a different registered form and modify the title and content of the post that form is bound to. |
| The Rede Itaú for WooCommerce — Payment PIX, Credit Card and Debit WordPress plugin before 5.4.7 does not verify the authenticity of its PIX payment webhook before updating an order's status, allowing unauthenticated attackers to mark a pending order as paid without paying. |
| The LiteSpeed Cache plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'esi' parameter in all versions up to, and including, 7.9 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. Exploitation requires that the attacker supply a validly signed 'esi' value in the GET query string while submitting a separate attacker-controlled 'esi' payload as a POST body field, relying on PHP's default $_REQUEST merge order to have the POST value take precedence at the point of execution. |
| A vulnerability has been found in olivier-ls PHP-FTS up to 1.1.3. This affects the function SearchEngine::matchesSingleFilter of the file src/SearchEngine.php of the component Filter Matching. The manipulation leads to incorrect comparison. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. Upgrading to version 1.1.4 is able to mitigate this issue. The identifier of the patch is 0b2fae333d6b022da7ed4c43e2d41aa03f91dff3. It is suggested to upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| In the Linux kernel, the following vulnerability has been resolved:
md: remove REQ_NOWAIT support from raid1/10/456
REQ_NOWAIT support in md personalities that can block internally is
fundamentally incomplete. While reads can avoid some blocking paths,
write requests can still encounter cases where one mirror succeeds while
another returns -EAGAIN. At that point md cannot distinguish queue
pressure from a real device failure, so it can neither record a bad
block nor safely retry the write without REQ_NOWAIT, leaving mirrors
with divergent data.
Rather than continue advertising REQ_NOWAIT support for personalities
that cannot implement it correctly, remove it from raid1, raid10 and
raid456. Keep REQ_NOWAIT for linear and raid0, which only remap bios to
their underlying devices; stacked limits will still clear the feature if
any component device lacks REQ_NOWAIT support. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix overreads in ath11k_wmi_process_csa_switch_count_event()
There is no policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT, so
the parse infrastructure does not enforce a minimum length for the event
struct. Additionally, the num_vdevs field is taken directly from firmware
and used as a loop bound over the vdev_ids array without checking that it
fits within the TLV payload. Either condition can cause an out-of-bounds
read.
Add a TLV policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT so
the parse infrastructure enforces a minimum length for the fixed-size event
struct. Add a helper ath11k_wmi_tlv_data_len() to recover the payload
length of a parsed TLV from the header preceding its data pointer. Use it
in ath11k_wmi_process_csa_switch_count_event() to bound num_vdevs before
the loop.
Compile tested only. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix UAF in ODP init error-handling path
rxe_odp_mr_init_user() stores &umem_odp->umem in mr->umem before
calling rxe_odp_init_pages(). If rxe_odp_init_pages() fails,
rxe_odp_mr_init_user() releases umem_odp and returns an error.
rxe_reg_user_mr() then unwinds the error through rxe_cleanup(),
rxe_mr_cleanup(), ib_umem_release(mr->umem). There is an
IS_ERR_OR_NULL(umem) check at the start of ib_umem_release().
But since mr->umem is NOT reset to NULL in the error handling
path of rxe_odp_mr_init_user(), the check passes and it reads
already-freed fields like umem->is_dmabuf, causing UAF.
Fix the UAF by clearing mr->umem after releasing the failed
ODP umem so the MR cleanup path does not release it again. |
