| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in grub2. When performing a symlink lookup from a reiserfs filesystem, grub's reiserfs fs module uses user-controlled parameters from the filesystem geometry to determine the internal buffer size, however, it improperly checks for integer overflows. A maliciouly crafted filesystem may lead some of those buffer size calculations to overflow, causing it to perform a grub_malloc() operation with a smaller size than expected. As a result, the grub_reiserfs_read_symlink() will call grub_reiserfs_read_real() with a overflown length parameter, leading to a heap based out-of-bounds write during data reading. This flaw may be leveraged to corrupt grub's internal critical data and can result in arbitrary code execution, by-passing secure boot protections. |
| A flaw was found in grub2. When performing a symlink lookup, the grub's UFS module checks the inode's data size to allocate the internal buffer to read the file content, however, it fails to check if the symlink data size has overflown. When this occurs, grub_malloc() may be called with a smaller value than needed. When further reading the data from the disk into the buffer, the grub_ufs_lookup_symlink() function will write past the end of the allocated size. An attack can leverage this by crafting a malicious filesystem, and as a result, it will corrupt data stored in the heap, allowing for arbitrary code execution used to by-pass secure boot mechanisms. |
| When reading data from a hfs filesystem, grub's hfs filesystem module uses user-controlled parameters from the filesystem metadata to calculate the internal buffers size, however it misses to properly check for integer overflows. A maliciouly crafted filesystem may lead some of those buffer size calculation to overflow, causing it to perform a grub_malloc() operation with a smaller size than expected. As a result the hfsplus_open_compressed_real() function will write past of the internal buffer length. This flaw may be leveraged to corrupt grub's internal critical data and may result in arbitrary code execution by-passing secure boot protections. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: pci: fix GAIT table indexing due to double-scaling pointer arithmetic
kvm_s390_pci_aif_enable(), kvm_s390_pci_aif_disable(), and
aen_host_forward() index the GAIT by manually multiplying the index
with sizeof(struct zpci_gaite).
Since aift->gait is already a struct zpci_gaite pointer, this
double-scales the offset, accessing element aisb*16 instead of aisb.
This causes out-of-bounds accesses when aisb >= 32 (with
ZPCI_NR_DEVICES=512)
Fix by removing the erroneous sizeof multiplication. |
| An out-of-bounds write flaw was found in X.Org and Xwayland. The function GetBarrierDevice() searches for the pointer device based on its device ID and returns the matching value, or supposedly NULL, if no match was found. However, the code will return the last element of the list if no matching device ID is found, which can lead to out-of-bounds memory access. |
| A heap overflow flaw was found in X.Org and Xwayland. The computation of the length in XkbSizeKeySyms() differs from what is written in XkbWriteKeySyms(), which may lead to a heap-based buffer overflow. |
| A buffer overflow flaw was found in X.Org and Xwayland. The code in XkbVModMaskText() allocates a fixed-sized buffer on the stack and copies the names of the virtual modifiers to that buffer. The code fails to check the bounds of the buffer and would copy the data regardless of the size. |
| A heap-based buffer overflow flaw was found in the rsync daemon. This issue is due to improper handling of attacker-controlled checksum lengths (s2length) in the code. When MAX_DIGEST_LEN exceeds the fixed SUM_LENGTH (16 bytes), an attacker can write out of bounds in the sum2 buffer. |
| A flaw was found in grub2. During the network boot process, when trying to search for the configuration file, grub copies data from a user controlled environment variable into an internal buffer using the grub_strcpy() function. During this step, it fails to consider the environment variable length when allocating the internal buffer, resulting in an out-of-bounds write. If correctly exploited, this issue may result in remote code execution through the same network segment grub is searching for the boot information, which can be used to by-pass secure boot protections. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix error cleanup in xe_exec_queue_create_ioctl()
Two error handling issues exist in xe_exec_queue_create_ioctl():
1. When xe_hw_engine_group_add_exec_queue() fails, the error path jumps
to put_exec_queue which skips xe_exec_queue_kill(). If the VM is in
preempt fence mode, xe_vm_add_compute_exec_queue() has already added
the queue to the VM's compute exec queue list. Skipping the kill
leaves the queue on that list, leading to a dangling pointer after
the queue is freed.
2. When xa_alloc() fails after xe_hw_engine_group_add_exec_queue() has
succeeded, the error path does not call
xe_hw_engine_group_del_exec_queue() to remove the queue from the hw
engine group list. The queue is then freed while still linked into
the hw engine group, causing a use-after-free.
Fix both by:
- Changing the xe_hw_engine_group_add_exec_queue() failure path to jump
to kill_exec_queue so that xe_exec_queue_kill() properly removes the
queue from the VM's compute list.
- Adding a del_hw_engine_group label before kill_exec_queue for the
xa_alloc() failure path, which removes the queue from the hw engine
group before proceeding with the rest of the cleanup.
(cherry picked from commit 37c831f401746a45d510b312b0ed7a77b1e06ec8) |
| In WC-Radio, there is a possible out of bounds write due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. |
| libde265 is an open source implementation of the h.265 video codec. Prior to version 1.0.20, a crafted H.265 bitstream can cause an out-of-bounds array write in `decoder_context::process_reference_picture_set()` (`libde265/decctx.cc:1376`). The root cause is a missing aggregate bound check on predicted short-term reference picture set entries. Individual list sizes are validated, but the combined count after predicted RPS construction can exceed the 16-entry `PocStFoll` array, writing at index 16. Version 1.0.20 patches the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
virt: sev-guest: Do not use host-controlled page order in cleanup path
When issuing an extended guest request (SVM_VMGEXIT_EXT_GUEST_REQUEST),
get_ext_report() allocates a buffer to retrieve a certificate blob from the
host, keeping track of its size in report_req->certs_len.
However, the host may return SNP_GUEST_VMM_ERR_INVALID_LEN, indicating
an invalid buffer size, as well as the expected length of such buffer.
get_ext_report() subsequently updates report_req->certs_len with the
host-controlled value, and cleans up the buffer by computing a page order
from such value. This is incorrect, as the host-provided length may not
match the page order of the original allocation, potentially resulting
in corruption in the page allocator.
Fix this by using alloc_pages_exact() instead, and reusing @npages to
compute the size passed to free_pages_exact(). For consistency, also
use @npages to compute the size when allocating the pages, even though
this last change has no functional effect. |
| Acrobat Reader versions 2020.009.20074, 2020.001.30002, 2017.011.30171, 2015.006.30523 and earlier are affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| dhcpcd through 10.3.2, fixed in commit 2f00c7b, contains a one-byte stack out-of-bounds write vulnerability in dhcp6_makemessage() in src/dhcp6.c that allows unauthenticated same-link attackers to write beyond a fixed local buffer by serializing an oversized RFC6603 OPTION_PD_EXCLUDE option body. Attackers can send a crafted DHCPv6 ADVERTISE message containing an IA_PD IAPREFIX /0 with a valid OPTION_PD_EXCLUDE using an exclude prefix length of /121 through /128 to trigger the out-of-bounds write and potentially corrupt adjacent stack memory. |
| dhcpcd through 10.3.2, fixed in commit 2f00c7b, contains a one-byte stack out-of-bounds write vulnerability in dhcp6_makemessage() in src/dhcp6.c that allows unauthenticated same-link attackers to write beyond a fixed local buffer by serializing an oversized RFC6603 OPTION_PD_EXCLUDE option body. Attackers can send a crafted DHCPv6 ADVERTISE message containing an IA_PD IAPREFIX /0 with a valid OPTION_PD_EXCLUDE using an exclude prefix length of /121 through /128 to trigger the out-of-bounds write and potentially corrupt adjacent stack memory. |
| A flaw was found in libsolv. This heap buffer overflow occurs during the decompression of attacker-controlled compressed data within `.solv` files due to insufficient input validation. An attacker can provide a specially crafted `.solv` file, which, when processed by a vulnerable application, can lead to out-of-bounds memory access. This could result in information disclosure, alteration of program execution, or a denial of service. |
| stable-diffusion.cpp is a pure C/C++ library for running diffusion model (Stable Diffusion, Flux, Wan, Qwen Image, Z-Image, and more) inference. Versions prior to master-584-0a7ae07 are vulnerable to heap buffer overflow in SHORT_BINUNICODE parsing for PyTorch checkpoint files. The pickle .ckpt parser in src/model.cpp contained a heap buffer overflow vulnerability in the SHORT_BINUNICODE opcode handler. The issue was caused by sign confusion on the opcode length field. A crafted .ckpt file could trigger memcpy with a very large length derived from a negative signed value, causing immediate heap corruption. Any application using affected stable-diffusion.cpp releases to load untrusted .ckpt model files could be vulnerable. A malicious checkpoint file could cause heap corruption through memcpy with an attacker-controlled length. This may lead to process crash and could potentially be leveraged for code execution depending on heap layout. The attack requires the victim or application to load a .ckpt file from an untrusted source, such as a downloaded model from a model sharing site. The issue has been resolved in version master-584-0a7ae07. If developers are unable to immediately update their applications they can work around this issue by not loading .ckpt checkpoint files from untrusted sources, and referring to trusted model sources and safer formats such as .safetensors where possible. |
| stable-diffusion.cpp is a pure C/C++ library for running diffusion model (Stable Diffusion, Flux, Wan, Qwen Image, Z-Image, and more) inference. In versions prior to master-584-0a7ae07, the pickle .ckpt parser in src/model.cpp contained a heap buffer overflow vulnerability in the GLOBAL opcode handler. The issue was caused by missing validation when searching for newline-delimited fields. A crafted .ckpt file without the expected newline could cause the parser to use -1 as a copy length, resulting in immediate heap corruption. The attack requires the victim or application to load a .ckpt file from an untrusted source, such as a downloaded model from a model sharing site. The issue has been resolved in version master-584-0a7ae07. If developers are unable to immediately update their applications they can work around this issue by following these instructions: do not load .ckpt checkpoint files from untrusted sources, and prefer trusted model sources and safer formats such as .safetensors where possible. |
| stable-diffusion.cpp is a pure C/C++ library for running diffusion model (Stable Diffusion, Flux, Wan, Qwen Image, Z-Image, and more) inference. In versions prior to master-584-0a7ae07, the pickle .ckpt parser in src/model.cpp contained a heap buffer overflow vulnerability in the BINUNICODE opcode handler. The issue was caused by sign confusion on the opcode length field. A crafted .ckpt file could trigger memcpy with a very large length derived from a negative signed value, causing immediate heap corruption.
The issue has been resolved in version master-584-0a7ae07. If developers are unable to immediately update their applications they can work around this issue by only loading .ckpt checkpoint files from trusted sources and preferring trusted model sources and safer formats such as .safetensors where possible. |
