| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Traefik is an HTTP reverse proxy and load balancer. Prior to 3.6.21 and 3.7.5, there is a high severity vulnerability in Traefik's Kubernetes Gateway provider affecting the crossProviderNamespaces allowlist. For HTTPRoute rules that declare multiple (WRR) backendRefs, Traefik evaluates the allowlist against the target backendRef.namespace instead of the route's own namespace. As a result, an HTTPRoute created in a namespace that is not allow-listed can reference a cross-provider TraefikService such as api@internal, dashboard@internal or rest@internal by pointing backendRef.namespace at an allow-listed namespace covered by a Gateway API ReferenceGrant, exposing internal Traefik services on the data plane. Exploitation requires the ability to create an accepted HTTPRoute and a matching ReferenceGrant from an allow-listed namespace; it does not require any change to Traefik static configuration, RBAC, or the deployment itself. This vulnerability is fixed in 3.6.21 and 3.7.5. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Fix handling of XN[0] when !FEAT_XNX
XN has already been extracted from its bitfield position so using
FIELD_PREP() on the mask that clears XN[0] is completely broken, having
the effect of unconditionally granting execute permissions...
Fix the obvious mistake by manipulating the right bit. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: use correct flags for device private PMD entry
Commit 65edfda6f3f2 ("mm/rmap: extend rmap and migration support
device-private entries") updated set_pmd_migration_entry() to use
pmdp_huge_get_and_clear() in the softleaf case, but made no further
adjustments to the function itself.
Therefore this function continues to incorrectly use pmd_write(),
pmd_soft_dirty() and pmd_uffd_wp() to determine whether the installed
migration entry should be marked writable, softdirty or uffd-wp
respectively.
Whilst all are incorrect, the most problematic of these is pmd_write(), as
this can lead to corrupted rmap state.
On x86-64 _PAGE_SWP_SOFT_DIRTY is aliased to _PAGE_RW. So calling
pmd_write() on a softleaf will return the softdirty state encoded in the
entry, assuming CONFIG_MEM_SOFT_DIRTY was enabled.
This was observed when running the hmm.hmm_device_private.anon_write_child
selftest:
1. The test faults in a range then migrates it such that a device-private
THP range is established.
2. The parent then migrates it to a device-private writable PMD entry whose
folio is entirely AnonExclusive with entire_mapcount=1, softdirty set
(accidentally correct write state).
3. The parent forks and the PMD entries are set to device-private read only
entries, entire_mapcount=2, softdirty still set.
4. [BUG] The child writes to the range then migrates to RAM - intending to
install non-writable migration entries - but replacing parent and child
PMD mappings with WRITABLE entries due to misinterpreting the softdirty
bit.
5. In remove_migration_pmd(), if !softleaf_is_migration_read(entry) we
set the RMAP_EXCLUSIVE flag when calling folio_add_anon_rmap_pmd() for
both parent and child, which are therefore AnonExclusive.
6. [SPLAT] Child sets migrated folio entire_mapcount=1, parent sets
entire_mapcount=2 and we end up with an AnonExclusive folio with
entire_mapcount=2! Assert fires in __folio_add_anon_rmap():
VM_WARN_ON_FOLIO(folio_test_large(folio) &&
folio_entire_mapcount(folio) > 1 &&
PageAnonExclusive(cur_page), folio)
This patch fixes the issue by correctly referencing the softleaf entry
fields for writable, softdirty and uffd-wp in set_pmd_migration_entry().
It also only updates A/D flags if the entry is present as these are
otherwise not meaningful for a softleaf entry.
This patch also flips the if (!present) { ... } else { ... } logic in
set_pmd_migration_entry() so it is easier to understand, and adds some
comments to make things clearer.
I was able to bisect this to commit 775465fd26a3 ("lib/test_hmm: add zone
device private THP test infrastructure") which first exposes this bug as
it was the commit that permitted test_hmm to generate the test.
However commit 65edfda6f3f2 ("mm/rmap: extend rmap and migration support
device-private entries") is the commit that actually enabled this
behaviour. |
| FOSSBilling is a free, open-source billing and client management system. In versions 0.7.2 and prior, the Servicecustom Client API's __call method accepts an order_id parameter and fetches the associated order without verifying the authenticated client owns it, potentially exposing cross-client data through IDOR. An authenticated client can access any other client's custom service by guessing sequential order IDs. This can lead to a confidentiality breach — attackers can read client PII (name, email, phone, address, company details, VAT number) and service configuration data belonging to other clients. This issue has been fixed in version 0.8.0. |
| motionEye (mEye) is an online interface for motion software, which is a video surveillance program with motion detection. Versions prior to 0.44.0 are vulnerable to path traversal in the picture and movie API endpoints, suhc as /picture/{id}/preview/{filename}. Neither the API handlers, nor the mediafiles.py functions such as get_media_preview() check for .. sequences in the filename parameter, except for get_media_content(). This allows an authenticated user with normal (non-admin) privileges to read arbitrary files from the filesystem as the motionEye process user, such as: /etc/passwd, /etc/shadow, motionEye config files containing password hashes and plaintext passwords, SSH keys, and other cameras' surveillance footage. This issue has been fixed in version 0.44.0. |
| Gogs is an open source self-hosted Git service. Prior to 0.14.3, Git smart HTTP authorizes POST …/git-receive-pack using the client-supplied service query string (so ?service=git-upload-pack is evaluated as read access) while routing still runs git receive-pack, allowing push where only read should be allowed. This vulnerability is fixed in 0.14.3. |
| A flaw was found in the Lightspeed history service. Insufficient access controls allow a local, unprivileged user to access and manipulate the chat history of another user on the same system. By abusing inter-process communication calls to the history service, an attacker can view, delete, or inject arbitrary history entries, including misleading or malicious commands. This can be used to deceive another user into executing harmful actions, posing a risk of privilege misuse or unauthorized command execution through social engineering. |
| The MagicForm WordPress plugin through 0.1.3 does not properly validate the type of files uploaded through an unauthenticated AJAX action when a form's per-field extension allowlist is left empty, allowing unauthenticated attackers to upload PHP files and execute arbitrary code on the server. |
| The Snowflake datasource allows for GET/PUT commands, which can allow any user with access to run queries against the data source to read/write files between the local grafana server and the connected Snowflake host. |
| A missing permission check in Jenkins Contrast Continuous Application Security Plugin 3.11 and earlier allows attackers with Overall/Read permission to connect to an attacker-specified URL using an attacker-specified username, API key, and service key. |
| A flaw in Node.js Permission Model enforcement allows Bypass via `process.report.writeReport()` Path Misvalidation. This can lead to confidentiality impact or bypass of the intended security boundary under affected configurations. This vulnerability affects all supported release lines: **Node.js 22**, **Node.js 24**, and **Node.js 26**. |
| Capgo (Cap-go/capgo) before 12.128.2 contains an improper access control vulnerability in the SECURITY DEFINER PostgREST RPC function public.record_build_time, which is granted to the anon role and callable with only the public Supabase publishable (sb_publishable_*) anon key. An unauthenticated attacker can insert rows into public.build_logs for arbitrary organizations and, because the function uses ON CONFLICT (build_id, org_id) DO UPDATE, can overwrite existing usage/billing records by reusing the same build_id for a target org. This enables cross-tenant tampering of billing build logs and financial-impact denial of service by inflating billable build time. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: fix MSG_ZEROCOPY pinned-pages accounting
virtio_transport_init_zcopy_skb() uses iter->count as the size argument
for msg_zerocopy_realloc(), which in turn passes it to
mm_account_pinned_pages() for RLIMIT_MEMLOCK accounting. However, this
function is called after virtio_transport_fill_skb() has already consumed
the iterator via __zerocopy_sg_from_iter(), so on the last skb, iter->count
will be 0, skipping the RLIMIT_MEMLOCK enforcement.
Pass pkt_len (the total bytes being sent) as an explicit parameter to
virtio_transport_init_zcopy_skb() instead of reading the already-consumed
iter->count.
This matches TCP and UDP, which both call msg_zerocopy_realloc() with
the original message size. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/riscv: Add IOTINVAL after updating DDT/PDT entries
Add riscv_iommu_iodir_iotinval() to perform required TLB and context cache
invalidations after updating DDT or PDT entries, as mandated by the RISC-V
IOMMU specification (Section 6.3.1 and 6.3.2). |
| In the Linux kernel, the following vulnerability has been resolved:
net: psp: require admin permission for dev-set and key-rotate
The dev-set and key-rotate netlink operations modify shared device
state (PSP version configuration and cryptographic key material,
respectively) but do not require CAP_NET_ADMIN. The only access
control is psp_dev_check_access() which merely verifies netns
membership. |
| The Site Kit by Google WordPress plugin before 1.176.0 does not properly restrict a REST API write endpoint to administrators, allowing lower-privileged users who have been granted dashboard sharing access (such as Editors) to modify a site-wide Site Kit by Google WordPress plugin before 1.176.0 setting that should only be modifiable by administrators. |
| The Cornerstone WordPress plugin before 7.8.8 does not enforce capability checks on one of its CSS-preview request handlers, and exposes the nonce needed to call it to every logged-in user on any wp-admin page, allowing any authenticated user to evaluate dynamic content tokens against arbitrary users and disclose their sensitive metadata including raw password hashes. This affects the premium co Cornerstone page builder distributed bundled with the X , not the unrelated free `cornerstone` Cornerstone WordPress plugin before 7.8.8 (v0.8.x) on the .org repository. |
| The Cornerstone WordPress plugin before 7.8.9 does not enforce capability checks on one of its REST API routes, allowing any authenticated user to disclose the metadata of any other user, including roles, session token previews and stored billing/shipping fields. This affects the premium co Cornerstone page builder distributed bundled with the X , not the unrelated free `cornerstone` Cornerstone WordPress plugin before 7.8.9 (v0.8.x) on the .org repository. |
| Capgo before 12.128.2 contains an improper access control vulnerability in the public.get_org_members RPC function that allows unauthenticated attackers to enumerate organization members. Attackers can invoke the endpoint using only the public sb_publishable_* key and an organization UUID to retrieve sensitive member information including email addresses, user IDs, roles, and pending invitations. |
| HCL Connections contains a broken access control vulnerability that may allow an unauthorized user to view data in a single specific scenario. |
