Export limit exceeded: 349269 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (349269 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-43374 | 1 Linux | 1 Linux Kernel | 2026-05-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: nexthop: fix percpu use-after-free in remove_nh_grp_entry When removing a nexthop from a group, remove_nh_grp_entry() publishes the new group via rcu_assign_pointer() then immediately frees the removed entry's percpu stats with free_percpu(). However, the synchronize_net() grace period in the caller remove_nexthop_from_groups() runs after the free. RCU readers that entered before the publish still see the old group and can dereference the freed stats via nh_grp_entry_stats_inc() -> get_cpu_ptr(nhge->stats), causing a use-after-free on percpu memory. Fix by deferring the free_percpu() until after synchronize_net() in the caller. Removed entries are chained via nh_list onto a local deferred free list. After the grace period completes and all RCU readers have finished, the percpu stats are safely freed. | ||||
| CVE-2026-43377 | 1 Linux | 1 Linux Kernel | 2026-05-09 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: Don't log keys in SMB3 signing and encryption key generation When KSMBD_DEBUG_AUTH logging is enabled, generate_smb3signingkey() and generate_smb3encryptionkey() log the session, signing, encryption, and decryption key bytes. Remove the logs to avoid exposing credentials. | ||||
| CVE-2026-43380 | 1 Linux | 1 Linux Kernel | 2026-05-09 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/q54sj108a2) fix stack overflow in debugfs read The q54sj108a2_debugfs_read function suffers from a stack buffer overflow due to incorrect arguments passed to bin2hex(). The function currently passes 'data' as the destination and 'data_char' as the source. Because bin2hex() converts each input byte into two hex characters, a 32-byte block read results in 64 bytes of output. Since 'data' is only 34 bytes (I2C_SMBUS_BLOCK_MAX + 2), this writes 30 bytes past the end of the buffer onto the stack. Additionally, the arguments were swapped: it was reading from the zero-initialized 'data_char' and writing to 'data', resulting in all-zero output regardless of the actual I2C read. Fix this by: 1. Expanding 'data_char' to 66 bytes to safely hold the hex output. 2. Correcting the bin2hex() argument order and using the actual read count. 3. Using a pointer to select the correct output buffer for the final simple_read_from_buffer call. | ||||
| CVE-2026-43381 | 1 Linux | 1 Linux Kernel | 2026-05-09 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nouveau/dpcd: return EBUSY for aux xfer if the device is asleep If we have runtime suspended, and userspace wants to use /dev/drm_dp_* then just tell it the device is busy instead of crashing in the GSP code. WARNING: CPU: 2 PID: 565741 at drivers/gpu/drm/nouveau/nvkm/subdev/gsp/rm/r535/rpc.c:164 r535_gsp_msgq_wait+0x9a/0xb0 [nouveau] CPU: 2 UID: 0 PID: 565741 Comm: fwupd Not tainted 6.18.10-200.fc43.x86_64 #1 PREEMPT(lazy) Hardware name: LENOVO 20QTS0PQ00/20QTS0PQ00, BIOS N2OET65W (1.52 ) 08/05/2024 RIP: 0010:r535_gsp_msgq_wait+0x9a/0xb0 [nouveau] This is a simple fix to get backported. We should probably engineer a proper power domain solution to wake up devices and keep them awake while fw updates are happening. | ||||
| CVE-2026-43382 | 1 Linux | 1 Linux Kernel | 2026-05-09 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: Avoid double-rtnl_lock ELP metric worker batadv_v_elp_get_throughput() might be called when the RTNL lock is already held. This could be problematic when the work queue item is cancelled via cancel_delayed_work_sync() in batadv_v_elp_iface_disable(). In this case, an rtnl_lock() would cause a deadlock. To avoid this, rtnl_trylock() was used in this function to skip the retrieval of the ethtool information in case the RTNL lock was already held. But for cfg80211 interfaces, batadv_get_real_netdev() was called - which also uses rtnl_lock(). The approach for __ethtool_get_link_ksettings() must also be used instead and the lockless version __batadv_get_real_netdev() has to be called. | ||||
| CVE-2026-43385 | 1 Linux | 1 Linux Kernel | 2026-05-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: Fix rcu_tasks stall in threaded busypoll I was debugging a NIC driver when I noticed that when I enable threaded busypoll, bpftrace hangs when starting up. dmesg showed: rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 10658 jiffies old. rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 40793 jiffies old. rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 131273 jiffies old. rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 402058 jiffies old. INFO: rcu_tasks detected stalls on tasks: 00000000769f52cd: .N nvcsw: 2/2 holdout: 1 idle_cpu: -1/64 task:napi/eth2-8265 state:R running task stack:0 pid:48300 tgid:48300 ppid:2 task_flags:0x208040 flags:0x00004000 Call Trace: <TASK> ? napi_threaded_poll_loop+0x27c/0x2c0 ? __pfx_napi_threaded_poll+0x10/0x10 ? napi_threaded_poll+0x26/0x80 ? kthread+0xfa/0x240 ? __pfx_kthread+0x10/0x10 ? ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ? ret_from_fork_asm+0x1a/0x30 </TASK> The cause is that in threaded busypoll, the main loop is in napi_threaded_poll rather than napi_threaded_poll_loop, where the latter rarely iterates more than once within its loop. For rcu_softirq_qs_periodic inside napi_threaded_poll_loop to report its qs state, the last_qs must be 100ms behind, and this can't happen because napi_threaded_poll_loop rarely iterates in threaded busypoll, and each time napi_threaded_poll_loop is called last_qs is reset to latest jiffies. This patch changes so that in threaded busypoll, last_qs is saved in the outer napi_threaded_poll, and whether busy_poll_last_qs is NULL indicates whether napi_threaded_poll_loop is called for busypoll. This way last_qs would not reset to latest jiffies on each invocation of napi_threaded_poll_loop. | ||||
| CVE-2026-43393 | 1 Linux | 1 Linux Kernel | 2026-05-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix chunk map leak in btrfs_map_block() after btrfs_chunk_map_num_copies() Fix a chunk map leak in btrfs_map_block(): if we return early with -EINVAL, we're not freeing the chunk map that we've just looked up. | ||||
| CVE-2026-43399 | 1 Linux | 1 Linux Kernel | 2026-05-09 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/userq: Fix reference leak in amdgpu_userq_wait_ioctl Drop reference to syncobj and timeline fence when aborting the ioctl due output array being too small. (cherry picked from commit 68951e9c3e6bb22396bc42ef2359751c8315dd27) | ||||
| CVE-2026-43400 | 1 Linux | 1 Linux Kernel | 2026-05-09 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: add upper bound check on user inputs in signal ioctl Huge input values in amdgpu_userq_signal_ioctl can lead to a OOM and could be exploited. So check these input value against AMDGPU_USERQ_MAX_HANDLES which is big enough value for genuine use cases and could potentially avoid OOM. (cherry picked from commit be267e15f99bc97cbe202cd556717797cdcf79a5) | ||||
| CVE-2026-43402 | 1 Linux | 1 Linux Kernel | 2026-05-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: kthread: consolidate kthread exit paths to prevent use-after-free Guillaume reported crashes via corrupted RCU callback function pointers during KUnit testing. The crash was traced back to the pidfs rhashtable conversion which replaced the 24-byte rb_node with an 8-byte rhash_head in struct pid, shrinking it from 160 to 144 bytes. struct kthread (without CONFIG_BLK_CGROUP) is also 144 bytes. With CONFIG_SLAB_MERGE_DEFAULT and SLAB_HWCACHE_ALIGN both round up to 192 bytes and share the same slab cache. struct pid.rcu.func and struct kthread.affinity_node both sit at offset 0x78. When a kthread exits via make_task_dead() it bypasses kthread_exit() and misses the affinity_node cleanup. free_kthread_struct() frees the memory while the node is still linked into the global kthread_affinity_list. A subsequent list_del() by another kthread writes through dangling list pointers into the freed and reused memory, corrupting the pid's rcu.func pointer. Instead of patching free_kthread_struct() to handle the missed cleanup, consolidate all kthread exit paths. Turn kthread_exit() into a macro that calls do_exit() and add kthread_do_exit() which is called from do_exit() for any task with PF_KTHREAD set. This guarantees that kthread-specific cleanup always happens regardless of the exit path - make_task_dead(), direct do_exit(), or kthread_exit(). Replace __to_kthread() with a new tsk_is_kthread() accessor in the public header. Export do_exit() since module code using the kthread_exit() macro now needs it directly. | ||||
| CVE-2026-43403 | 1 Linux | 1 Linux Kernel | 2026-05-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: nsfs: tighten permission checks for ns iteration ioctls Even privileged services should not necessarily be able to see other privileged service's namespaces so they can't leak information to each other. Use may_see_all_namespaces() helper that centralizes this policy until the nstree adapts. | ||||
| CVE-2026-43405 | 1 Linux | 1 Linux Kernel | 2026-05-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: Use u32 for non-negative values in ceph_monmap_decode() This patch fixes unnecessary implicit conversions that change signedness of blob_len and num_mon in ceph_monmap_decode(). Currently blob_len and num_mon are (signed) int variables. They are used to hold values that are always non-negative and get assigned in ceph_decode_32_safe(), which is meant to assign u32 values. Both variables are subsequently used as unsigned values, and the value of num_mon is further assigned to monmap->num_mon, which is of type u32. Therefore, both variables should be of type u32. This is especially relevant for num_mon. If the value read from the incoming message is very large, it is interpreted as a negative value, and the check for num_mon > CEPH_MAX_MON does not catch it. This leads to the attempt to allocate a very large chunk of memory for monmap, which will most likely fail. In this case, an unnecessary attempt to allocate memory is performed, and -ENOMEM is returned instead of -EINVAL. | ||||
| CVE-2026-43406 | 1 Linux | 1 Linux Kernel | 2026-05-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: prevent potential out-of-bounds reads in process_message_header() If the message frame is (maliciously) corrupted in a way that the length of the control segment ends up being less than the size of the message header or a different frame is made to look like a message frame, out-of-bounds reads may ensue in process_message_header(). Perform an explicit bounds check before decoding the message header. | ||||
| CVE-2026-43407 | 1 Linux | 1 Linux Kernel | 2026-05-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential out-of-bounds access in ceph_handle_auth_reply() This patch fixes an out-of-bounds access in ceph_handle_auth_reply() that can be triggered by a message of type CEPH_MSG_AUTH_REPLY. In ceph_handle_auth_reply(), the value of the payload_len field of such a message is stored in a variable of type int. A value greater than INT_MAX leads to an integer overflow and is interpreted as a negative value. This leads to decrementing the pointer address by this value and subsequently accessing it because ceph_decode_need() only checks that the memory access does not exceed the end address of the allocation. This patch fixes the issue by changing the data type of payload_len to u32. Additionally, the data type of result_msg_len is changed to u32, as it is also a variable holding a non-negative length. Also, an additional layer of sanity checks is introduced, ensuring that directly after reading it from the message, payload_len and result_msg_len are not greater than the overall segment length. BUG: KASAN: slab-out-of-bounds in ceph_handle_auth_reply+0x642/0x7a0 [libceph] Read of size 4 at addr ffff88811404df14 by task kworker/20:1/262 CPU: 20 UID: 0 PID: 262 Comm: kworker/20:1 Not tainted 6.19.2 #5 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: ceph-msgr ceph_con_workfn [libceph] Call Trace: <TASK> dump_stack_lvl+0x76/0xa0 print_report+0xd1/0x620 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? kasan_complete_mode_report_info+0x72/0x210 kasan_report+0xe7/0x130 ? ceph_handle_auth_reply+0x642/0x7a0 [libceph] ? ceph_handle_auth_reply+0x642/0x7a0 [libceph] __asan_report_load_n_noabort+0xf/0x20 ceph_handle_auth_reply+0x642/0x7a0 [libceph] mon_dispatch+0x973/0x23d0 [libceph] ? apparmor_socket_recvmsg+0x6b/0xa0 ? __pfx_mon_dispatch+0x10/0x10 [libceph] ? __kasan_check_write+0x14/0x30i ? mutex_unlock+0x7f/0xd0 ? __pfx_mutex_unlock+0x10/0x10 ? __pfx_do_recvmsg+0x10/0x10 [libceph] ceph_con_process_message+0x1f1/0x650 [libceph] process_message+0x1e/0x450 [libceph] ceph_con_v2_try_read+0x2e48/0x6c80 [libceph] ? __pfx_ceph_con_v2_try_read+0x10/0x10 [libceph] ? save_fpregs_to_fpstate+0xb0/0x230 ? raw_spin_rq_unlock+0x17/0xa0 ? finish_task_switch.isra.0+0x13b/0x760 ? __switch_to+0x385/0xda0 ? __kasan_check_write+0x14/0x30 ? mutex_lock+0x8d/0xe0 ? __pfx_mutex_lock+0x10/0x10 ceph_con_workfn+0x248/0x10c0 [libceph] process_one_work+0x629/0xf80 ? __kasan_check_write+0x14/0x30 worker_thread+0x87f/0x1570 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? __pfx_try_to_wake_up+0x10/0x10 ? kasan_print_address_stack_frame+0x1f7/0x280 ? __pfx_worker_thread+0x10/0x10 kthread+0x396/0x830 ? __pfx__raw_spin_lock_irq+0x10/0x10 ? __pfx_kthread+0x10/0x10 ? __kasan_check_write+0x14/0x30 ? recalc_sigpending+0x180/0x210 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3f7/0x610 ? __pfx_ret_from_fork+0x10/0x10 ? __switch_to+0x385/0xda0 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> [ idryomov: replace if statements with ceph_decode_need() for payload_len and result_msg_len ] | ||||
| CVE-2026-43408 | 1 Linux | 1 Linux Kernel | 2026-05-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ceph: add a bunch of missing ceph_path_info initializers ceph_mdsc_build_path() must be called with a zero-initialized ceph_path_info parameter, or else the following ceph_mdsc_free_path_info() may crash. Example crash (on Linux 6.18.12): virt_to_cache: Object is not a Slab page! WARNING: CPU: 184 PID: 2871736 at mm/slub.c:6732 kmem_cache_free+0x316/0x400 [...] Call Trace: [...] ceph_open+0x13d/0x3e0 do_dentry_open+0x134/0x480 vfs_open+0x2a/0xe0 path_openat+0x9a3/0x1160 [...] cache_from_obj: Wrong slab cache. names_cache but object is from ceph_inode_info WARNING: CPU: 184 PID: 2871736 at mm/slub.c:6746 kmem_cache_free+0x2dd/0x400 [...] kernel BUG at mm/slub.c:634! Oops: invalid opcode: 0000 [#1] SMP NOPTI RIP: 0010:__slab_free+0x1a4/0x350 Some of the ceph_mdsc_build_path() callers had initializers, but others had not, even though they were all added by commit 15f519e9f883 ("ceph: fix race condition validating r_parent before applying state"). The ones without initializer are suspectible to random crashes. (I can imagine it could even be possible to exploit this bug to elevate privileges.) Unfortunately, these Ceph functions are undocumented and its semantics can only be derived from the code. I see that ceph_mdsc_build_path() initializes the structure only on success, but not on error. Calling ceph_mdsc_free_path_info() after a failed ceph_mdsc_build_path() call does not even make sense, but that's what all callers do, and for it to be safe, the structure must be zero-initialized. The least intrusive approach to fix this is therefore to add initializers everywhere. | ||||
| CVE-2026-43409 | 1 Linux | 1 Linux Kernel | 2026-05-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: kprobes: avoid crash when rmmod/insmod after ftrace killed After we hit ftrace is killed by some errors, the kernel crash if we remove modules in which kprobe probes. BUG: unable to handle page fault for address: fffffbfff805000d PGD 817fcc067 P4D 817fcc067 PUD 817fc8067 PMD 101555067 PTE 0 Oops: Oops: 0000 [#1] SMP KASAN PTI CPU: 4 UID: 0 PID: 2012 Comm: rmmod Tainted: G W OE Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE RIP: 0010:kprobes_module_callback+0x89/0x790 RSP: 0018:ffff88812e157d30 EFLAGS: 00010a02 RAX: 1ffffffff805000d RBX: dffffc0000000000 RCX: ffffffff86a8de90 RDX: ffffed1025c2af9b RSI: 0000000000000008 RDI: ffffffffc0280068 RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed1025c2af9a R10: ffff88812e157cd7 R11: 205d323130325420 R12: 0000000000000002 R13: ffffffffc0290488 R14: 0000000000000002 R15: ffffffffc0280040 FS: 00007fbc450dd740(0000) GS:ffff888420331000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff805000d CR3: 000000010f624000 CR4: 00000000000006f0 Call Trace: <TASK> notifier_call_chain+0xc6/0x280 blocking_notifier_call_chain+0x60/0x90 __do_sys_delete_module.constprop.0+0x32a/0x4e0 do_syscall_64+0x5d/0xfa0 entry_SYSCALL_64_after_hwframe+0x76/0x7e This is because the kprobe on ftrace does not correctly handles the kprobe_ftrace_disabled flag set by ftrace_kill(). To prevent this error, check kprobe_ftrace_disabled in __disarm_kprobe_ftrace() and skip all ftrace related operations. | ||||
| CVE-2026-43411 | 1 Linux | 1 Linux Kernel | 2026-05-09 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix divide-by-zero in tipc_sk_filter_connect() A user can set conn_timeout to any value via setsockopt(TIPC_CONN_TIMEOUT), including values less than 4. When a SYN is rejected with TIPC_ERR_OVERLOAD and the retry path in tipc_sk_filter_connect() executes: delay %= (tsk->conn_timeout / 4); If conn_timeout is in the range [0, 3], the integer division yields 0, and the modulo operation triggers a divide-by-zero exception, causing a kernel oops/panic. Fix this by clamping conn_timeout to a minimum of 4 at the point of use in tipc_sk_filter_connect(). Oops: divide error: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 119 Comm: poc-F144 Not tainted 7.0.0-rc2+ RIP: 0010:tipc_sk_filter_rcv (net/tipc/socket.c:2236 net/tipc/socket.c:2362) Call Trace: tipc_sk_backlog_rcv (include/linux/instrumented.h:82 include/linux/atomic/atomic-instrumented.h:32 include/net/sock.h:2357 net/tipc/socket.c:2406) __release_sock (include/net/sock.h:1185 net/core/sock.c:3213) release_sock (net/core/sock.c:3797) tipc_connect (net/tipc/socket.c:2570) __sys_connect (include/linux/file.h:62 include/linux/file.h:83 net/socket.c:2098) | ||||
| CVE-2026-6666 | 1 Pgbouncer | 1 Pgbouncer | 2026-05-09 | 5.9 Medium |
| A possible null pointer reference in PgBouncer before 1.25.2 could lead to a crash, if a server sends an error response without SQLSTATE field. | ||||
| CVE-2026-43288 | 1 Linux | 1 Linux Kernel | 2026-05-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: move ext4_percpu_param_init() before ext4_mb_init() When running `kvm-xfstests -c ext4/1k -C 1 generic/383` with the `DOUBLE_CHECK` macro defined, the following panic is triggered: ================================================================== EXT4-fs error (device vdc): ext4_validate_block_bitmap:423: comm mount: bg 0: bad block bitmap checksum BUG: unable to handle page fault for address: ff110000fa2cc000 PGD 3e01067 P4D 3e02067 PUD 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 2386 Comm: mount Tainted: G W 6.18.0-gba65a4e7120a-dirty #1152 PREEMPT(none) RIP: 0010:percpu_counter_add_batch+0x13/0xa0 Call Trace: <TASK> ext4_mark_group_bitmap_corrupted+0xcb/0xe0 ext4_validate_block_bitmap+0x2a1/0x2f0 ext4_read_block_bitmap+0x33/0x50 mb_group_bb_bitmap_alloc+0x33/0x80 ext4_mb_add_groupinfo+0x190/0x250 ext4_mb_init_backend+0x87/0x290 ext4_mb_init+0x456/0x640 __ext4_fill_super+0x1072/0x1680 ext4_fill_super+0xd3/0x280 get_tree_bdev_flags+0x132/0x1d0 vfs_get_tree+0x29/0xd0 vfs_cmd_create+0x59/0xe0 __do_sys_fsconfig+0x4f6/0x6b0 do_syscall_64+0x50/0x1f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ================================================================== This issue can be reproduced using the following commands: mkfs.ext4 -F -q -b 1024 /dev/sda 5G tune2fs -O quota,project /dev/sda mount /dev/sda /tmp/test With DOUBLE_CHECK defined, mb_group_bb_bitmap_alloc() reads and validates the block bitmap. When the validation fails, ext4_mark_group_bitmap_corrupted() attempts to update sbi->s_freeclusters_counter. However, this percpu_counter has not been initialized yet at this point, which leads to the panic described above. Fix this by moving the execution of ext4_percpu_param_init() to occur before ext4_mb_init(), ensuring the per-CPU counters are initialized before they are used. | ||||
| CVE-2026-43291 | 1 Linux | 1 Linux Kernel | 2026-05-09 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: nfc: nci: Fix parameter validation for packet data Since commit 9c328f54741b ("net: nfc: nci: Add parameter validation for packet data") communication with nci nfc chips is not working any more. The mentioned commit tries to fix access of uninitialized data, but failed to understand that in some cases the data packet is of variable length and can therefore not be compared to the maximum packet length given by the sizeof(struct). | ||||