| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Fix the descriptor address in __kvm_at_swap_desc()
Using "(u64 __user *)hva + offset" to get the virtual addresses of S1/S2
descriptors looks really wrong, if offset is not zero. What we want to get
for swapping is hva + offset, not hva + offset*8. ;-)
Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Require sys_futex_requeue() to have identical flags
Nicholas reported that his LLM found it was possible to create a UaF
when sys_futex_requeue() is used with different flags. The initial
motivation for allowing different flags was the variable sized futex,
but since that hasn't been merged (yet), simply mandate the flags are
identical, as is the case for the old style sys_futex() requeue
operations. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: vub300: fix NULL-deref on disconnect
Make sure to deregister the controller before dropping the reference to
the driver data on disconnect to avoid NULL-pointer dereferences or
use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: vub300: fix use-after-free on disconnect
The vub300 driver maintains an explicit reference count for the
controller and its driver data and the last reference can in theory be
dropped after the driver has been unbound.
This specifically means that the controller allocation must not be
device managed as that can lead to use-after-free.
Note that the lifetime is currently also incorrectly tied the parent USB
device rather than interface, which can lead to memory leaks if the
driver is unbound without its device being physically disconnected (e.g.
on probe deferral).
Fix both issues by reverting to non-managed allocation of the controller. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Clear stale exiting pointer in futex_lock_pi() retry path
Fuzzying/stressing futexes triggered:
WARNING: kernel/futex/core.c:825 at wait_for_owner_exiting+0x7a/0x80, CPU#11: futex_lock_pi_s/524
When futex_lock_pi_atomic() sees the owner is exiting, it returns -EBUSY
and stores a refcounted task pointer in 'exiting'.
After wait_for_owner_exiting() consumes that reference, the local pointer
is never reset to nil. Upon a retry, if futex_lock_pi_atomic() returns a
different error, the bogus pointer is passed to wait_for_owner_exiting().
CPU0 CPU1 CPU2
futex_lock_pi(uaddr)
// acquires the PI futex
exit()
futex_cleanup_begin()
futex_state = EXITING;
futex_lock_pi(uaddr)
futex_lock_pi_atomic()
attach_to_pi_owner()
// observes EXITING
*exiting = owner; // takes ref
return -EBUSY
wait_for_owner_exiting(-EBUSY, owner)
put_task_struct(); // drops ref
// exiting still points to owner
goto retry;
futex_lock_pi_atomic()
lock_pi_update_atomic()
cmpxchg(uaddr)
*uaddr ^= WAITERS // whatever
// value changed
return -EAGAIN;
wait_for_owner_exiting(-EAGAIN, exiting) // stale
WARN_ON_ONCE(exiting)
Fix this by resetting upon retry, essentially aligning it with requeue_pi. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: scrub: unlock dquot before early return in quota scrub
xchk_quota_item can return early after calling xchk_fblock_process_error.
When that helper returns false, the function returned immediately without
dropping dq->q_qlock, which can leave the dquot lock held and risk lock
leaks or deadlocks in later quota operations.
Fix this by unlocking dq->q_qlock before the early return. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: move async event work off nvmet-wq
For target nvmet_ctrl_free() flushes ctrl->async_event_work.
If nvmet_ctrl_free() runs on nvmet-wq, the flush re-enters workqueue
completion for the same worker:-
A. Async event work queued on nvmet-wq (prior to disconnect):
nvmet_execute_async_event()
queue_work(nvmet_wq, &ctrl->async_event_work)
nvmet_add_async_event()
queue_work(nvmet_wq, &ctrl->async_event_work)
B. Full pre-work chain (RDMA CM path):
nvmet_rdma_cm_handler()
nvmet_rdma_queue_disconnect()
__nvmet_rdma_queue_disconnect()
queue_work(nvmet_wq, &queue->release_work)
process_one_work()
lock((wq_completion)nvmet-wq) <--------- 1st
nvmet_rdma_release_queue_work()
C. Recursive path (same worker):
nvmet_rdma_release_queue_work()
nvmet_rdma_free_queue()
nvmet_sq_destroy()
nvmet_ctrl_put()
nvmet_ctrl_free()
flush_work(&ctrl->async_event_work)
__flush_work()
touch_wq_lockdep_map()
lock((wq_completion)nvmet-wq) <--------- 2nd
Lockdep splat:
============================================
WARNING: possible recursive locking detected
6.19.0-rc3nvme+ #14 Tainted: G N
--------------------------------------------
kworker/u192:42/44933 is trying to acquire lock:
ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90
but task is already holding lock:
ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660
3 locks held by kworker/u192:42/44933:
#0: ffff888118a00948 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x53e/0x660
#1: ffffc9000e6cbe28 ((work_completion)(&queue->release_work)){+.+.}-{0:0}, at: process_one_work+0x1c5/0x660
#2: ffffffff82d4db60 (rcu_read_lock){....}-{1:3}, at: __flush_work+0x62/0x530
Workqueue: nvmet-wq nvmet_rdma_release_queue_work [nvmet_rdma]
Call Trace:
__flush_work+0x268/0x530
nvmet_ctrl_free+0x140/0x310 [nvmet]
nvmet_cq_put+0x74/0x90 [nvmet]
nvmet_rdma_free_queue+0x23/0xe0 [nvmet_rdma]
nvmet_rdma_release_queue_work+0x19/0x50 [nvmet_rdma]
process_one_work+0x206/0x660
worker_thread+0x184/0x320
kthread+0x10c/0x240
ret_from_fork+0x319/0x390
Move async event work to a dedicated nvmet-aen-wq to avoid reentrant
flush on nvmet-wq. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Make kvm_get_vcpu_by_cpuid() more robust
kvm_get_vcpu_by_cpuid() takes a cpuid parameter whose type is int, so
cpuid can be negative. Let kvm_get_vcpu_by_cpuid() return NULL for this
case so as to make it more robust.
This fix an out-of-bounds access to kvm_arch::phyid_map::phys_map[]. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix integer underflow in chain mode
The jumbo_frm() chain-mode implementation unconditionally computes
len = nopaged_len - bmax;
where nopaged_len = skb_headlen(skb) (linear bytes only) and bmax is
BUF_SIZE_8KiB or BUF_SIZE_2KiB. However, the caller stmmac_xmit()
decides to invoke jumbo_frm() based on skb->len (total length including
page fragments):
is_jumbo = stmmac_is_jumbo_frm(priv, skb->len, enh_desc);
When a packet has a small linear portion (nopaged_len <= bmax) but a
large total length due to page fragments (skb->len > bmax), the
subtraction wraps as an unsigned integer, producing a huge len value
(~0xFFFFxxxx). This causes the while (len != 0) loop to execute
hundreds of thousands of iterations, passing skb->data + bmax * i
pointers far beyond the skb buffer to dma_map_single(). On IOMMU-less
SoCs (the typical deployment for stmmac), this maps arbitrary kernel
memory to the DMA engine, constituting a kernel memory disclosure and
potential memory corruption from hardware.
Fix this by introducing a buf_len local variable clamped to
min(nopaged_len, bmax). Computing len = nopaged_len - buf_len is then
always safe: it is zero when the linear portion fits within a single
descriptor, causing the while (len != 0) loop to be skipped naturally,
and the fragment loop in stmmac_xmit() handles page fragments afterward. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Fix missing NULL checks for kstrdup()
1. Replace "of_find_node_by_path("/")" with "of_root" to avoid multiple
calls to "of_node_put()".
2. Fix a potential kernel oops during early boot when memory allocation
fails while parsing CPU model from device tree. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: filemap: fix nr_pages calculation overflow in filemap_map_pages()
When running stress-ng on my Arm64 machine with v7.0-rc3 kernel, I
encountered some very strange crash issues showing up as "Bad page state":
"
[ 734.496287] BUG: Bad page state in process stress-ng-env pfn:415735fb
[ 734.496427] page: refcount:0 mapcount:1 mapping:0000000000000000 index:0x4cf316 pfn:0x415735fb
[ 734.496434] flags: 0x57fffe000000800(owner_2|node=1|zone=2|lastcpupid=0x3ffff)
[ 734.496439] raw: 057fffe000000800 0000000000000000 dead000000000122 0000000000000000
[ 734.496440] raw: 00000000004cf316 0000000000000000 0000000000000000 0000000000000000
[ 734.496442] page dumped because: nonzero mapcount
"
After analyzing this page’s state, it is hard to understand why the
mapcount is not 0 while the refcount is 0, since this page is not where
the issue first occurred. By enabling the CONFIG_DEBUG_VM config, I can
reproduce the crash as well and captured the first warning where the issue
appears:
"
[ 734.469226] page: refcount:33 mapcount:0 mapping:00000000bef2d187 index:0x81a0 pfn:0x415735c0
[ 734.469304] head: order:5 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 734.469315] memcg:ffff000807a8ec00
[ 734.469320] aops:ext4_da_aops ino:100b6f dentry name(?):"stress-ng-mmaptorture-9397-0-2736200540"
[ 734.469335] flags: 0x57fffe400000069(locked|uptodate|lru|head|node=1|zone=2|lastcpupid=0x3ffff)
......
[ 734.469364] page dumped because: VM_WARN_ON_FOLIO((_Generic((page + nr_pages - 1),
const struct page *: (const struct folio *)_compound_head(page + nr_pages - 1), struct page *:
(struct folio *)_compound_head(page + nr_pages - 1))) != folio)
[ 734.469390] ------------[ cut here ]------------
[ 734.469393] WARNING: ./include/linux/rmap.h:351 at folio_add_file_rmap_ptes+0x3b8/0x468,
CPU#90: stress-ng-mlock/9430
[ 734.469551] folio_add_file_rmap_ptes+0x3b8/0x468 (P)
[ 734.469555] set_pte_range+0xd8/0x2f8
[ 734.469566] filemap_map_folio_range+0x190/0x400
[ 734.469579] filemap_map_pages+0x348/0x638
[ 734.469583] do_fault_around+0x140/0x198
......
[ 734.469640] el0t_64_sync+0x184/0x188
"
The code that triggers the warning is: "VM_WARN_ON_FOLIO(page_folio(page +
nr_pages - 1) != folio, folio)", which indicates that set_pte_range()
tried to map beyond the large folio’s size.
By adding more debug information, I found that 'nr_pages' had overflowed
in filemap_map_pages(), causing set_pte_range() to establish mappings for
a range exceeding the folio size, potentially corrupting fields of pages
that do not belong to this folio (e.g., page->_mapcount).
After above analysis, I think the possible race is as follows:
CPU 0 CPU 1
filemap_map_pages() ext4_setattr()
//get and lock folio with old inode->i_size
next_uptodate_folio()
.......
//shrink the inode->i_size
i_size_write(inode, attr->ia_size);
//calculate the end_pgoff with the new inode->i_size
file_end = DIV_ROUND_UP(i_size_read(mapping->host), PAGE_SIZE) - 1;
end_pgoff = min(end_pgoff, file_end);
......
//nr_pages can be overflowed, cause xas.xa_index > end_pgoff
end = folio_next_index(folio) - 1;
nr_pages = min(end, end_pgoff) - xas.xa_index + 1;
......
//map large folio
filemap_map_folio_range()
......
//truncate folios
truncate_pagecache(inode, inode->i_size);
To fix this issue, move the 'end_pgoff' calculation before
next_uptodate_folio(), so the retrieved folio stays consistent with the
file end to avoid
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rt2x00usb: fix devres lifetime
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the USB anchor lifetime so that it is released on driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm_user: fix info leak in build_report()
struct xfrm_user_report is a __u8 proto field followed by a struct
xfrm_selector which means there is three "empty" bytes of padding, but
the padding is never zeroed before copying to userspace. Fix that up by
zeroing the structure before setting individual member variables. |
| In the Linux kernel, the following vulnerability has been resolved:
net: rfkill: prevent unlimited numbers of rfkill events from being created
Userspace can create an unlimited number of rfkill events if the system
is so configured, while not consuming them from the rfkill file
descriptor, causing a potential out of memory situation. Prevent this
from bounding the number of pending rfkill events at a "large" number
(i.e. 1000) to prevent abuses like this. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix slab-use-after-free in __inet_lookup_established
The ehash table lookups are lockless and rely on
SLAB_TYPESAFE_BY_RCU to guarantee socket memory stability
during RCU read-side critical sections. Both tcp_prot and
tcpv6_prot have their slab caches created with this flag
via proto_register().
However, MPTCP's mptcp_subflow_init() copies tcpv6_prot into
tcpv6_prot_override during inet_init() (fs_initcall, level 5),
before inet6_init() (module_init/device_initcall, level 6) has
called proto_register(&tcpv6_prot). At that point,
tcpv6_prot.slab is still NULL, so tcpv6_prot_override.slab
remains NULL permanently.
This causes MPTCP v6 subflow child sockets to be allocated via
kmalloc (falling into kmalloc-4k) instead of the TCPv6 slab
cache. The kmalloc-4k cache lacks SLAB_TYPESAFE_BY_RCU, so
when these sockets are freed without SOCK_RCU_FREE (which is
cleared for child sockets by design), the memory can be
immediately reused. Concurrent ehash lookups under
rcu_read_lock can then access freed memory, triggering a
slab-use-after-free in __inet_lookup_established.
Fix this by splitting the IPv6-specific initialization out of
mptcp_subflow_init() into a new mptcp_subflow_v6_init(), called
from mptcp_proto_v6_init() before protocol registration. This
ensures tcpv6_prot_override.slab correctly inherits the
SLAB_TYPESAFE_BY_RCU slab cache. |
| In the Linux kernel, the following vulnerability has been resolved:
seg6: separate dst_cache for input and output paths in seg6 lwtunnel
The seg6 lwtunnel uses a single dst_cache per encap route, shared
between seg6_input_core() and seg6_output_core(). These two paths
can perform the post-encap SID lookup in different routing contexts
(e.g., ip rules matching on the ingress interface, or VRF table
separation). Whichever path runs first populates the cache, and the
other reuses it blindly, bypassing its own lookup.
Fix this by splitting the cache into cache_input and cache_output,
so each path maintains its own cached dst independently. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: uinput - fix circular locking dependency with ff-core
A lockdep circular locking dependency warning can be triggered
reproducibly when using a force-feedback gamepad with uinput (for
example, playing ELDEN RING under Wine with a Flydigi Vader 5
controller):
ff->mutex -> udev->mutex -> input_mutex -> dev->mutex -> ff->mutex
The cycle is caused by four lock acquisition paths:
1. ff upload: input_ff_upload() holds ff->mutex and calls
uinput_dev_upload_effect() -> uinput_request_submit() ->
uinput_request_send(), which acquires udev->mutex.
2. device create: uinput_ioctl_handler() holds udev->mutex and calls
uinput_create_device() -> input_register_device(), which acquires
input_mutex.
3. device register: input_register_device() holds input_mutex and
calls kbd_connect() -> input_register_handle(), which acquires
dev->mutex.
4. evdev release: evdev_release() calls input_flush_device() under
dev->mutex, which calls input_ff_flush() acquiring ff->mutex.
Fix this by introducing a new state_lock spinlock to protect
udev->state and udev->dev access in uinput_request_send() instead of
acquiring udev->mutex. The function only needs to atomically check
device state and queue an input event into the ring buffer via
uinput_dev_event() -- both operations are safe under a spinlock
(ktime_get_ts64() and wake_up_interruptible() do not sleep). This
breaks the ff->mutex -> udev->mutex link since a spinlock is a leaf in
the lock ordering and cannot form cycles with mutexes.
To keep state transitions visible to uinput_request_send(), protect
writes to udev->state in uinput_create_device() and
uinput_destroy_device() with the same state_lock spinlock.
Additionally, move init_completion(&request->done) from
uinput_request_send() to uinput_request_submit() before
uinput_request_reserve_slot(). Once the slot is allocated,
uinput_flush_requests() may call complete() on it at any time from
the destroy path, so the completion must be initialised before the
request becomes visible.
Lock ordering after the fix:
ff->mutex -> state_lock (spinlock, leaf)
udev->mutex -> state_lock (spinlock, leaf)
udev->mutex -> input_mutex -> dev->mutex -> ff->mutex (no back-edge) |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix incorrect return value after changing leaf in lookup_extent_data_ref()
After commit 1618aa3c2e01 ("btrfs: simplify return variables in
lookup_extent_data_ref()"), the err and ret variables were merged into
a single ret variable. However, when btrfs_next_leaf() returns 0
(success), ret is overwritten from -ENOENT to 0. If the first key in
the next leaf does not match (different objectid or type), the function
returns 0 instead of -ENOENT, making the caller believe the lookup
succeeded when it did not. This can lead to operations on the wrong
extent tree item, potentially causing extent tree corruption.
Fix this by returning -ENOENT directly when the key does not match,
instead of relying on the ret variable. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: fix use-after-free in timeout object destroy
nft_ct_timeout_obj_destroy() frees the timeout object with kfree()
immediately after nf_ct_untimeout(), without waiting for an RCU grace
period. Concurrent packet processing on other CPUs may still hold
RCU-protected references to the timeout object obtained via
rcu_dereference() in nf_ct_timeout_data().
Add an rcu_head to struct nf_ct_timeout and use kfree_rcu() to defer
freeing until after an RCU grace period, matching the approach already
used in nfnetlink_cttimeout.c.
KASAN report:
BUG: KASAN: slab-use-after-free in nf_conntrack_tcp_packet+0x1381/0x29d0
Read of size 4 at addr ffff8881035fe19c by task exploit/80
Call Trace:
nf_conntrack_tcp_packet+0x1381/0x29d0
nf_conntrack_in+0x612/0x8b0
nf_hook_slow+0x70/0x100
__ip_local_out+0x1b2/0x210
tcp_sendmsg_locked+0x722/0x1580
__sys_sendto+0x2d8/0x320
Allocated by task 75:
nft_ct_timeout_obj_init+0xf6/0x290
nft_obj_init+0x107/0x1b0
nf_tables_newobj+0x680/0x9c0
nfnetlink_rcv_batch+0xc29/0xe00
Freed by task 26:
nft_obj_destroy+0x3f/0xa0
nf_tables_trans_destroy_work+0x51c/0x5c0
process_one_work+0x2c4/0x5a0 |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: clear trailing padding in build_polexpire()
build_expire() clears the trailing padding bytes of struct
xfrm_user_expire after setting the hard field via memset_after(),
but the analogous function build_polexpire() does not do this for
struct xfrm_user_polexpire.
The padding bytes after the __u8 hard field are left
uninitialized from the heap allocation, and are then sent to
userspace via netlink multicast to XFRMNLGRP_EXPIRE listeners,
leaking kernel heap memory contents.
Add the missing memset_after() call, matching build_expire(). |
