| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mcast: always update mdb_n_entries for vlan contexts
syzbot triggered a warning[1] about the number of mdb entries in a context.
It turned out that there are multiple ways to trigger that warning today
(some got added during the years), the root cause of the problem is that
the increase is done conditionally, and over the years these different
conditions increased so there were new ways to trigger the warning, that is
to do a decrease which wasn't paired with a previous increase.
For example one way to trigger it is with flush:
$ ip l add br0 up type bridge vlan_filtering 1 mcast_snooping 1
$ ip l add dumdum up master br0 type dummy
$ bridge mdb add dev br0 port dumdum grp 239.0.0.1 permanent vid 1
$ ip link set dev br0 down
$ ip link set dev br0 type bridge mcast_vlan_snooping 1
^^^^ this will enable snooping, but will not update mdb_n_entries
because in __br_multicast_enable_port_ctx() we check !netif_running
$ bridge mdb flush dev br0
^^^ this will trigger the warning because it will delete the pg which
we added above, which will try to decrease mdb_n_entries
Fix the problem by removing the conditional increase and always keep the
count up-to-date while the vlan exists. In order to do that we have to
first initialize it on port-vlan context creation, and then always increase
or decrease the value regardless of mcast options. To keep the current
behaviour we have to enforce the mdb limit only if the context is port's or
if the port-vlan's mcast snooping is enabled.
[1]
------------[ cut here ]------------
n == 0
WARNING: net/bridge/br_multicast.c:718 at br_multicast_port_ngroups_dec_one net/bridge/br_multicast.c:718 [inline], CPU#0: syz.4.4607/22043
WARNING: net/bridge/br_multicast.c:718 at br_multicast_port_ngroups_dec net/bridge/br_multicast.c:771 [inline], CPU#0: syz.4.4607/22043
WARNING: net/bridge/br_multicast.c:718 at br_multicast_del_pg+0x1bbe/0x1e20 net/bridge/br_multicast.c:825, CPU#0: syz.4.4607/22043
Modules linked in:
CPU: 0 UID: 0 PID: 22043 Comm: syz.4.4607 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/24/2026
RIP: 0010:br_multicast_port_ngroups_dec_one net/bridge/br_multicast.c:718 [inline]
RIP: 0010:br_multicast_port_ngroups_dec net/bridge/br_multicast.c:771 [inline]
RIP: 0010:br_multicast_del_pg+0x1bbe/0x1e20 net/bridge/br_multicast.c:825
Code: 41 5f 5d e9 04 7a 48 f7 e8 3f 73 5c f7 90 0f 0b 90 e9 cf fd ff ff e8 31 73 5c f7 90 0f 0b 90 e9 16 fd ff ff e8 23 73 5c f7 90 <0f> 0b 90 e9 60 fd ff ff e8 15 73 5c f7 eb 05 e8 0e 73 5c f7 48 8b
RSP: 0018:ffffc9000c207220 EFLAGS: 00010293
RAX: ffffffff8a68042d RBX: ffff88807c6f1800 RCX: ffff888066e90000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffff888066e90000 R09: 000000000000000c
R10: 000000000000000c R11: 0000000000000000 R12: ffff8880303ef800
R13: dffffc0000000000 R14: ffff888050eb11c4 R15: 1ffff1100a1d6238
FS: 00007fa45921b6c0(0000) GS:ffff8881256f5000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa4591f9ff8 CR3: 0000000081df2000 CR4: 00000000003526f0
Call Trace:
<TASK>
br_mdb_flush_pgs net/bridge/br_mdb.c:1525 [inline]
br_mdb_flush net/bridge/br_mdb.c:1544 [inline]
br_mdb_del_bulk+0x5e2/0xb20 net/bridge/br_mdb.c:1561
rtnl_mdb_del+0x48a/0x640 net/core/rtnetlink.c:-1
rtnetlink_rcv_msg+0x77e/0xbe0 net/core/rtnetlink.c:6967
netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0xa68/0xad0 net/socket.c:2592
___sys_sendmsg+0x2a5/0x360 net/socke
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Use kvfree instead of kfree in amdgpu_gmc_get_nps_memranges()
amdgpu_discovery_get_nps_info() internally allocates memory for ranges
using kvcalloc(), which may use vmalloc() for large allocation. Using
kfree() to release vmalloc memory will lead to a memory corruption.
Use kvfree() to safely handle both kmalloc and vmalloc allocations.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 12.7 before 18.10.7, 18.11 before 18.11.4, and 19.0 before 19.0.1 that under certain conditions could have allowed an authenticated user to access CI data from a different ref type than intended. |
| GitBucket 4.23.1 contains an unauthenticated remote code execution vulnerability that allows attackers to execute arbitrary commands by exploiting weak secret token generation and insecure file upload functionality. Attackers can brute-force the Blowfish encryption key, upload a malicious JAR plugin via the git-lfs endpoint, and execute system commands through an exposed exploit endpoint. |
| Home Assistant Community Store (HACS) prior to 1.10.0 contains a path traversal vulnerability that allows unauthenticated attackers to read sensitive files by traversing directories via the /hacsfiles/ endpoint. Attackers can retrieve the .storage/auth file containing user credentials and refresh tokens, then craft valid JWT tokens to gain administrative access to Home Assistant instances. |
| Nx Console is the user interface for Nx & Lerna. On 19 May 2026, a malicious version of Nx Console, 18.95.0, was published at 12:30 PM UTC and removed soon after at 12:48 PM UTC, leaving it available for ~18 minutes in Visual Studio Marketplace. For OpenVSX, the problem was detected later, and the compromised version was available from 12:33 UTC to 13:09 UTC (~36 minutes). Version 18.100.0 of Nx Console is not compromised and users may remediate by upgrading to that version. |
| Hedera Guardian through 3.5.1 contains an authentication bypass vulnerability in the GET /api/v1/demo/registered-users endpoint that allows unauthenticated attackers to retrieve sensitive user information. Attackers can access the endpoint without providing authentication credentials to obtain usernames, Hedera DIDs, parent registry DIDs, system roles, and policy role assignments for all registered users in the system. |
| CWE-312: Cleartext Storage of Sensitive Information vulnerability exists that could cause the disclosure of a sensitive information which could result in revealing protected source code and loss of confidentiality, When an authorized attacker accesses the source code for editing or compiling it. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: goldfish: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-llbitmap: raise barrier before state machine transition
Move the barrier raise operation before calling llbitmap_state_machine()
in both llbitmap_start_write() and llbitmap_start_discard(). This
ensures the barrier is in place before any state transitions occur,
preventing potential race conditions where the state machine could
complete before the barrier is properly raised. |
| Hatchet is a platform for orchestrating background tasks, AI agents, and durable workflows at scale. Prior to 0.83.39, a missing authorization directive on the GET /api/v1/stable/dags/tasks endpoint caused Hatchet's tenant-membership check to be skipped for this route. A user authenticated to any tenant on the same Hatchet instance could query the endpoint with another tenant's UUID and a DAG UUID belonging to that tenant, and receive task metadata for that DAG. This vulnerability is fixed in 0.83.39. |
| A logic issue was addressed with improved checks. This issue is fixed in macOS Sequoia 15.7, macOS Sonoma 14.8, macOS Tahoe 26. A malicious app may be able to gain root privileges. |
| A permissions issue was addressed by removing the vulnerable code. This issue is fixed in macOS Tahoe 26. An app may be able to access sensitive user data. |
| A vulnerability was detected in Totolink CA750-PoE 6.2c.510. The impacted element is the function recvUpgradeNewFw of the file /cgi-bin/cstecgi.cgi of the component Setting Handler. Performing a manipulation of the argument fwUrl/magicid results in os command injection. It is possible to initiate the attack remotely. The exploit is now public and may be used. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in macOS Tahoe 26. An app may be able to cause unexpected system termination. |
| A race condition was addressed with additional validation. This issue is fixed in macOS Sequoia 15.7, macOS Tahoe 26. An app may be able to gain root privileges. |
| A vulnerability was determined in itsourcecode Electronic Judging System 1.0. This issue affects some unknown processing of the file /admin/judges.php. This manipulation of the argument fname causes cross site scripting. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. |
| A weakness has been identified in blitz-js blitz up to 3.0.2 on GitHub. This impacts an unknown function of the file packages/generator/templates/app/src/app/auth/components/LoginForm.tsx of the component Sign-in. This manipulation of the argument Next causes cross site scripting. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A logic issue was addressed with improved restrictions. This issue is fixed in macOS Tahoe 26. An app may be able to access sensitive user data. |
| A vulnerability was found in Edimax EW-7438RPn up to 1.31. Affected by this vulnerability is an unknown functionality of the file /goform/mp of the component webs. The manipulation of the argument webs results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
