| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in gnutls. This vulnerability occurs because permitted name constraints were incorrectly ignored when previous Certificate Authorities (CAs) only had excluded name constraints. A remote attacker could exploit this to bypass critical name constraint checks during certificate validation. This bypass could lead to the acceptance of invalid certificates, potentially enabling spoofing or man-in-the-middle attacks against affected systems. |
| A flaw was found in gnutls. This vulnerability occurs because gnutls performs case-sensitive comparisons of `nameConstraints` labels, specifically for `dNSName` (DNS) or `rfc822Name` (email) constraints within `excludedSubtrees` or `permittedSubtrees`. A remote attacker can exploit this by crafting a leaf certificate with casing differences in the Subject Alternative Name (SAN), leading to a policy bypass where a certificate that should be rejected is instead accepted. This could result in unauthorized access or information disclosure. |
| A flaw was found in gnutls. Servers configured with RSA-PSK (Rivest–Shamir–Adleman – Pre-Shared Key) wrongfully matched usernames containing a NUL character with truncated usernames. A remote attacker could exploit this by sending a specially crafted username, leading to an authentication bypass. This vulnerability allows an attacker to gain unauthorized access by circumventing the authentication process. |
| A flaw was found in gnutls. A remote attacker could exploit an issue in the Datagram Transport Layer Security (DTLS) packet reordering logic. The comparator function, responsible for ordering DTLS packets by sequence numbers, did not correctly handle packets with duplicate sequence numbers. This could lead to unstable packet ordering or undefined behavior, resulting in a denial of service. |
| A heap buffer overflow vulnerability exists in the DTLS handshake fragment reassembly logic of GnuTLS. The issue arises in merge_handshake_packet() where incoming handshake fragments are matched and merged based solely on handshake type, without validating that the message_length field remains consistent across all fragments of the same logical message. An attacker can exploit this by sending crafted DTLS fragments with conflicting message_length values, causing the implementation to allocate a buffer based on a smaller initial fragment and subsequently write beyond its bounds using larger, inconsistent fragments. Because the merge operation does not enforce proper bounds checking against the allocated buffer size, this results in an out-of-bounds write on the heap. The vulnerability is remotely exploitable without authentication via the DTLS handshake path and can lead to application crashes or potential memory corruption. |
| A flaw in GnuTLS DTLS handshake parsing allows malformed fragments with zero length and non-zero offset, leading to an integer underflow during reassembly and resulting in an out-of-bounds read. This issue is remotely exploitable and may cause information disclosure or denial of service. |
| A race condition was addressed with additional validation. This issue is fixed in macOS Sequoia 15.7, macOS Tahoe 26. An app may be able to gain root privileges. |
| A server-side request forgery (SSRF) vulnerability was identified in GitHub Enterprise Server that allowed an unauthenticated attacker to send crafted requests to internal services by exploiting insufficient input validation in an upload endpoint. By injecting path traversal content into request parameters, an attacker could bypass the intended request flow and redirect internal API calls, potentially accessing internal services and exposing sensitive credentials. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.22 and was fixed in versions 3.16.20, 3.17.17, 3.18.11, 3.19.8, 3.20.4, and 3.21.1. This vulnerability was reported via the GitHub Bug Bounty program. |
| In OpenStack Swift before 2.36.2 and 2.37.2, s3api middleware enters an infinite loop when processing a truncated aws-chunked PUT request body. The StreamingInput class repeatedly appends an empty buffer and re-reads, causing the proxy-server worker handling the request to become permanently unresponsive with increasing CPU and memory consumption. An authenticated attacker can systematically exhaust all proxy-server workers, resulting in denial of service. The defect was introduced in Swift 2.36.0. |
| A Server-Side Request Forgery (SSRF) vulnerability was identified in GitHub Enterprise Server that allowed an attacker to cause the server to issue HTTP requests to internal services via the security advisories package lookup feature. By directing requests to an internal management service and measuring response timing, an attacker could infer the values of sensitive environment variables, including signing secrets and private keys. Exploitation required GitHub Packages to be enabled; on instances not running in private mode the vulnerability was exploitable without authentication, otherwise any authenticated user could exploit it. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.21.1 and was fixed in versions 3.20.3, 3.19.7, 3.18.10, 3.17.16, and 3.16.19. This vulnerability was reported via the GitHub Bug Bounty program. |
| A flaw has been found in UTT HiPER 1250GW up to 3.2.7-210907-180535. Affected by this issue is the function strcpy of the file /goform/formGroupConfig of the component Web Management Interface. Executing a manipulation of the argument Profile can lead to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been published and may be used. |
| A weakness has been identified in UTT HiPER 1200GW up to 2.5.3-170306. Affected is an unknown function of the file /goform/formPptpClientConfig of the component Web Management Interface. This manipulation of the argument PPTP server address/username/password/tunnel name causes stack-based buffer overflow. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. |
| FastNetMon Community Edition through 1.2.9 exposes a gRPC API server on port 50052 with no authentication mechanism. The server is initialized with grpc::InsecureServerCredentials() (src/fastnetmon.cpp line 477) and a source code comment explicitly acknowledges 'Listen on the given address without any authentication mechanism.' None of the RPC methods in src/api.cpp (ExecuteBan, ExecuteUnBan, GetBanlist, GetTotalTrafficCounters, etc.) perform any credential verification. The ExecuteBan and ExecuteUnBan methods trigger security-critical actions: BGP route announcements that can blackhole network traffic, and execution of external notification scripts via popen(). An attacker with local network access can ban arbitrary IP addresses (causing denial of service to legitimate traffic), unban active attacks (disabling DDoS mitigation), and trigger script execution. There is also no role-based access control separating read-only monitoring from destructive administrative operations. |
| FastNetMon Community Edition through 1.2.9 contains an integer overflow vulnerability in the packet capture buffer allocation. In src/packet_storage.hpp, the allocate_buffer() function computes memory_size_in_bytes as 'buffer_size_in_packets * (max_captured_packet_size + sizeof(fastnetmon_pcap_pkthdr_t)) + sizeof(fastnetmon_pcap_file_header_t)' using unsigned int (32-bit) arithmetic. With max_captured_packet_size=1500 and sizeof(fastnetmon_pcap_pkthdr_t)=16, each packet requires approximately 1516 bytes. If buffer_size_in_packets exceeds approximately 2,832,542, the multiplication overflows, resulting in a much smaller allocation than expected. Subsequent write_packet() calls then write past the allocated buffer, causing heap corruption. The buffer_size_in_packets value is derived from the ban_details_records_count configuration parameter, which is parsed using atoi() with no overflow checking. |
| FastNetMon Community Edition through 1.2.9 contains multiple out-of-bounds reads in the BGP MP_REACH_NLRI IPv6 attribute decoder. The function decode_mp_reach_ipv6() in src/bgp_protocol.cpp contains a TODO comment at line 156 explicitly acknowledging 'we should add sanity checks to avoid reads after attribute memory block.' The function casts raw pointers to structure types without verifying sufficient data exists (line 158), uses the attacker-controlled length_of_next_hop field to determine memcpy size (line 181), and computes prefix_length by dereferencing a pointer calculated from multiple attacker-controlled offsets without bounds validation (line 189). The prefix_length is then used to calculate number_of_bytes_required_for_prefix which becomes a memcpy length (line 202) with no check against remaining buffer size. |
| FastNetMon Community Edition through 1.2.9 is vulnerable to a local symlink attack via predictable file paths in /tmp. The statistics file path defaults to '/tmp/fastnetmon.dat' (src/fastnetmon.cpp line 159). The print_screen_contents_into_file() function (src/fastnetmon_logic.cpp line 2186) opens this path with std::ios::trunc without checking for symlinks or using O_NOFOLLOW. Additionally, the chmod() call on line 2190 always operates on cli_stats_file_path regardless of which file_path parameter was passed (a bug that applies wrong permissions), and the umask is set to 0 during daemonization (src/fastnetmon.cpp line 1821), making all created files world-writable. A local attacker can exploit this to overwrite arbitrary files as the FastNetMon process user (typically root). |
| The Drag and Drop Multiple File Upload for Contact Form 7 plugin for WordPress is vulnerable to arbitrary file upload in versions up to, and including, 1.3.9.7. This is due to insufficient file type validation that occurs when custom blacklist types are configured, which replaces the default dangerous extension denylist instead of merging with it, and the wpcf7_antiscript_file_name() sanitization function being bypassed for filenames containing non-ASCII characters. This makes it possible for unauthenticated attackers to upload arbitrary files, such as PHP files, to the server, which can be leveraged to achieve remote code execution. The vulnerability was originally reported by Leonid Semenenko (lsemenenko) and partially patched in version 1.3.9.7. A bypass for the patch was separately discovered and reported by Nguyen Hung (Mitchell). |
| A vulnerability was found in itsourcecode Courier Management System 1.0. The affected element is an unknown function of the file /parcel_list.php. Performing a manipulation of the argument s results in sql injection. It is possible to initiate the attack remotely. The exploit has been made public and could be used. |
| FastNetMon Community Edition through 1.2.9 contains a stack-based buffer overflow in the BGP NLRI (Network Layer Reachability Information) decoder. The function decode_bgp_subnet_encoding_ipv4_raw() in src/bgp_protocol.cpp reads prefix_bit_length directly from the BGP packet (line 99) without validating it is <= 32 for IPv4 prefixes. This value is passed to how_much_bytes_we_need_for_storing_certain_subnet_mask() which computes ceil(prefix_bit_length / 8), returning up to 32 bytes for a prefix_bit_length of 255. The result is used as the length argument to memcpy() (line 106), which copies into a 4-byte uint32_t stack variable (prefix_ipv4). This causes a stack buffer overflow of up to 28 bytes, which can be exploited for arbitrary code execution. Additionally, the unvalidated prefix_bit_length is passed to convert_cidr_to_binary_netmask_local_function_copy() (line 111), where a shift of (32 - cidr) with cidr > 32 causes undefined behavior. |
| Dozzle is a realtime log viewer for docker containers. Prior to 10.5.2, he WebSocket upgrader for the /exec and /attach endpoints uses CheckOrigin: func(r *http.Request) bool { return true }, accepting upgrade requests from any origin. Combined with the JWT cookie using SameSite: Lax, this enables Cross-Site WebSocket Hijacking (CSWSH). An attacker hosting a page on a same-site origin (e.g., a sibling subdomain, or another service on localhost) can initiate a WebSocket connection to the exec endpoint that carries the victim's valid JWT cookie, gaining interactive shell access in any container the victim is authorized to access. This vulnerability is fixed in 10.5.2. |
