| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the Virtual Keyboard Video Monitor (vKVM) connection handling of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker with low privileges to conduct a stored cross-site scripting (XSS) attack against a user of the interface.
This vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected system. An attacker could exploit this vulnerability by injecting malicious code into a specific data field in the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker must have valid user credentials with privileges that allow for vKVM access on the affected device.
Note: The affected vKVM client is also included in Cisco UCS Manager. |
| A vulnerability in the DHCP client functionality of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, adjacent attacker to exhaust available memory.
This vulnerability is due to improper validation of incoming DHCP packets. An attacker could exploit this vulnerability by repeatedly sending crafted DHCPv4 packets to an affected device. A successful exploit could allow the attacker to exhaust available memory, which would affect availability of services and prevent new processes from starting, resulting in a Denial of Service (DoS) condition that would require a manual reboot.
Note: On Cisco Secure FTD Software, this vulnerability does not affect management interfaces. |
| A vulnerability in the CLI of Cisco Secure Firewall Management Center (FMC) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as root.
This vulnerability is due to improper input validation for specific CLI commands. An attacker could exploit this vulnerability by injecting operating system commands into a legitimate command. A successful exploit could allow the attacker to escape the restricted command prompt and execute arbitrary commands on the underlying operating system. To successfully exploit this vulnerability, an attacker would need valid Administrator credentials.
For more information about vulnerable scenarios, see the Details ["#details"] section of this advisory. |
| A vulnerability in Cisco Catalyst Center Virtual Appliance could allow an authenticated, remote attacker to elevate privileges to Administrator on an affected system.
This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by submitting a crafted HTTP request to an affected system. A successful exploit could allow the attacker to perform unauthorized modifications to the system, including creating new user accounts or elevating their own privileges on an affected system. To exploit this vulnerability, the attacker must have valid credentials for a user account with at least the role of Observer. |
| A vulnerability in the web-based management interface of Cisco Catalyst Center Virtual Appliance could allow an unauthenticated, remote attacker to redirect a user to a malicious web page.
This vulnerability is due to improper input validation of HTTP request parameters. An attacker could exploit this vulnerability by intercepting and modifying an HTTP request from a user. A successful exploit could allow the attacker to redirect the user to a malicious web page. |
| A vulnerability in Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system with root-level privileges. To exploit this vulnerability, the attacker must have valid administrative credentials.
This vulnerability is due to insufficient input validation of commands that are supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input for specific commands. A successful exploit could allow the attacker to execute commands on the underlying operating system as root. |
| A vulnerability in the web-based management interface of Cisco Small Business RV042 Dual WAN VPN Routers and Cisco Small Business RV042G Dual Gigabit WAN VPN Routers could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device.
The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of the affected software. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive browser-based information.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| A vulnerability in the meeting-join functionality of Cisco Webex Meetings could have allowed an unauthenticated, network-proximate attacker to complete a meeting-join process in place of an intended targeted user, provided the requisite conditions were satisfied. Cisco has addressed this vulnerability in the Cisco Webex Meetings service, and no customer action is needed.
This vulnerability existed due to client certificate validation issues. Prior to this vulnerability being addressed, an attacker could have exploited this vulnerability by monitoring local wireless or adjacent networks for client-join requests and attempting to interrupt and complete the meeting-join flow as another user who was currently joining a meeting. To successfully exploit the vulnerability, an attacker would need the capability to position themselves in a local wireless or adjacent network, to monitor and intercept the targeted network traffic flows, and to satisfy timing requirements in order to interrupt the meeting-join flow and exploit the vulnerability. A successful exploit could have allowed the attacker to join the meeting as another user. However, the Cisco Product Security Incident Response Team (PSIRT) is not aware of any malicious use of the vulnerability that is described in this advisory. |
| An issue was discovered in the ALFA Windows 10 driver 6.1316.1209 for AWUS036H. The Wi-Fi implementation does not verify the Message Integrity Check (authenticity) of fragmented TKIP frames. An adversary can abuse this to inject and possibly decrypt packets in WPA or WPA2 networks that support the TKIP data-confidentiality protocol. |
| An issue was discovered in the ALFA Windows 10 driver 6.1316.1209 for AWUS036H. The WEP, WPA, WPA2, and WPA3 implementations accept plaintext frames in a protected Wi-Fi network. An adversary can abuse this to inject arbitrary data frames independent of the network configuration. |
| An issue was discovered in the kernel in NetBSD 7.1. An Access Point (AP) forwards EAPOL frames to other clients even though the sender has not yet successfully authenticated to the AP. This might be abused in projected Wi-Fi networks to launch denial-of-service attacks against connected clients and makes it easier to exploit other vulnerabilities in connected clients. |
| The 802.11 standard that underpins Wi-Fi Protected Access (WPA, WPA2, and WPA3) and Wired Equivalent Privacy (WEP) doesn't require that the A-MSDU flag in the plaintext QoS header field is authenticated. Against devices that support receiving non-SSP A-MSDU frames (which is mandatory as part of 802.11n), an adversary can abuse this to inject arbitrary network packets. |
| A vulnerability in Cisco Nexus Dashboard and Cisco Nexus Dashboard Insights could allow an unauthenticated, remote attacker to conduct a server-side request forgery (SSRF) attack through an affected device.
This vulnerability is due to improper input validation for specific HTTP requests. An attacker could exploit this vulnerability by persuading an authenticated user of the device management interface to click a crafted link. A successful exploit could allow the attacker to send arbitrary network requests that are sourced from the affected device to an attacker-controlled server. The attacker could then execute arbitrary script code in the context of the affected interface or access sensitive browser-based information. |
| A vulnerability in the Metadata update feature of Cisco Nexus Dashboard Insights could allow an authenticated, remote attacker to write arbitrary files to an affected system.
This vulnerability is due to insufficient validation of the metadata update file. An attacker could exploit this vulnerability by crafting a metadata update file and manually uploading it to an affected device. A successful exploit could allow the attacker to write arbitrary files to the underlying operating system as the root user. To exploit this vulnerability, the attacker must have valid administrative credentials.
Note: Manual uploading of metadata files is typical for Air-Gap environments but not for Cisco Intersight Cloud connected devices. However, the manual upload option exists for both deployments. |
| A vulnerability in the configuration backup feature of Cisco Nexus Dashboard could allow an attacker who has the encryption password and access to Full or Config-only backup files to access sensitive information.
This vulnerability exists because authentication details are included in the encrypted backup files. An attacker with a valid backup file and encryption password from an affected device could decrypt the backup file. The attacker could then use the authentication details in the backup file to access internal-only APIs on the affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system as the root user. |
| A vulnerability in the change password functionality of Cisco Integrated Management Controller (IMC) could allow an unauthenticated, remote attacker to bypass authentication and gain access to the system as Admin.
This vulnerability is due to incorrect handling of password change requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to bypass authentication, alter the passwords of any user on the system, including an Admin user, and gain access to the system as that user. |
| A vulnerability in the web interface of Cisco Smart Software Manager On-Prem (SSM On-Prem) could allow an authenticated, remote attacker to elevate privileges on an affected system.
This vulnerability is due to the improper transmission of sensitive user information. An attacker could exploit this vulnerability by sending a crafted message to an affected Cisco SSM On-Prem host and retrieving session credentials from subsequent status messages. A successful exploit could allow the attacker to elevate privileges on the affected system from low to administrative.
To exploit this vulnerability, the attacker must have valid credentials for a user account with at least the role of System User.
Note: This vulnerability exposes information only about users who logged in to the Cisco SSM On-Prem host using the web interface and who are currently logged in. SSH sessions are not affected. |
| A vulnerability in Cisco Smart Software Manager On-Prem (SSM On-Prem) could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected SSM On-Prem host.
This vulnerability is due to the unintentional exposure of an internal service. An attacker could exploit this vulnerability by sending a crafted request to the API of the exposed service. A successful exploit could allow the attacker to execute commands on the underlying operating system with root-level privileges. |
| A vulnerability in the web-based management interface of Cisco Evolved Programmable Network Manager (EPNM) could allow an authenticated, remote attacker with low privileges to access sensitive information that they are not authorized to access.
This vulnerability is due to improper authorization checks on a REST API endpoint of an affected device. An attacker could exploit this vulnerability by querying the affected endpoint. A successful exploit could allow the attacker to view session information of active Cisco EPNM users, including users with administrative privileges, which could result in the affected device being compromised. |
| A vulnerability in the REST API and web UI of Cisco Nexus Dashboard Fabric Controller (NDFC) could allow an authenticated, low-privileged, remote attacker to perform a command injection attack against an affected device.
This vulnerability is due to improper user authorization and insufficient validation of command arguments. An attacker could exploit this vulnerability by submitting crafted commands to an affected REST API endpoint or through the web UI. A successful exploit could allow the attacker to execute arbitrary commands on the CLI of a Cisco NDFC-managed device with network-admin privileges.
Note: This vulnerability does not affect Cisco NDFC when it is configured for storage area network (SAN) controller deployment. |
