| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| RARLAB WinRAR Recovery Volume Improper Validation of Array Index Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of RARLAB WinRAR. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the processing of recovery volumes. The issue results from the lack of proper validation of user-supplied data, which can result in a memory access past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-21233. |
| There is a type confusion vulnerability relating to X.400 address processing
inside an X.509 GeneralName. X.400 addresses were parsed as an ASN1_STRING but
the public structure definition for GENERAL_NAME incorrectly specified the type
of the x400Address field as ASN1_TYPE. This field is subsequently interpreted by
the OpenSSL function GENERAL_NAME_cmp as an ASN1_TYPE rather than an
ASN1_STRING.
When CRL checking is enabled (i.e. the application sets the
X509_V_FLAG_CRL_CHECK flag), this vulnerability may allow an attacker to pass
arbitrary pointers to a memcmp call, enabling them to read memory contents or
enact a denial of service. In most cases, the attack requires the attacker to
provide both the certificate chain and CRL, neither of which need to have a
valid signature. If the attacker only controls one of these inputs, the other
input must already contain an X.400 address as a CRL distribution point, which
is uncommon. As such, this vulnerability is most likely to only affect
applications which have implemented their own functionality for retrieving CRLs
over a network. |
| Envoy is a cloud-native, open source edge and service proxy. The HTTP/2 protocol stack in Envoy versions prior to 1.29.3, 1.28.2, 1.27.4, and 1.26.8 are vulnerable to CPU exhaustion due to flood of CONTINUATION frames. Envoy's HTTP/2 codec allows the client to send an unlimited number of CONTINUATION frames even after exceeding Envoy's header map limits. This allows an attacker to send a sequence of CONTINUATION frames without the END_HEADERS bit set causing CPU utilization, consuming approximately 1 core per 300Mbit/s of traffic and culminating in denial of service through CPU exhaustion. Users should upgrade to version 1.29.3, 1.28.2, 1.27.4, or 1.26.8 to mitigate the effects of the CONTINUATION flood. As a workaround, disable HTTP/2 protocol for downstream connections. |
| An issue was discovered on WyreStorm Apollo VX20 devices before 1.3.58. Remote attackers can discover cleartext passwords via a SoftAP /device/config GET request. |
| Improper neutralization of special elements results in a SQL Injection vulnerability in Riello Netman 204. It is only limited to the SQLite database of measurement data.This issue affects Netman 204: through 4.05. |
| Git is a revision control system. Prior to versions 2.45.1, 2.44.1, 2.43.4, 2.42.2, 2.41.1, 2.40.2, and 2.39.4, repositories with submodules can be crafted in a way that exploits a bug in Git whereby it can be fooled into writing files not into the submodule's worktree but into a `.git/` directory. This allows writing a hook that will be executed while the clone operation is still running, giving the user no opportunity to inspect the code that is being executed. The problem has been patched in versions 2.45.1, 2.44.1, 2.43.4, 2.42.2, 2.41.1, 2.40.2, and 2.39.4. If symbolic link support is disabled in Git (e.g. via `git config --global core.symlinks false`), the described attack won't work. As always, it is best to avoid cloning repositories from untrusted sources. |
| Cacti provides an operational monitoring and fault management framework. Prior to version 1.2.27, an arbitrary file write vulnerability, exploitable through the "Package Import" feature, allows authenticated users having the "Import Templates" permission to execute arbitrary PHP code on the web server. The vulnerability is located within the `import_package()` function defined into the `/lib/import.php` script. The function blindly trusts the filename and file content provided within the XML data, and writes such files into the Cacti base path (or even outside, since path traversal sequences are not filtered). This can be exploited to write or overwrite arbitrary files on the web server, leading to execution of arbitrary PHP code or other security impacts. Version 1.2.27 contains a patch for this issue. |
| Remote Code Execution in PAN-OS 7.1.18 and earlier, PAN-OS 8.0.11-h1 and earlier, and PAN-OS 8.1.2 and earlier with GlobalProtect Portal or GlobalProtect Gateway Interface enabled may allow an unauthenticated remote attacker to execute arbitrary code. |
| An authentication bypass in Palo Alto Networks PAN-OS software enables an unauthenticated attacker with network access to the management web interface to gain PAN-OS administrator privileges to perform administrative actions, tamper with the configuration, or exploit other authenticated privilege escalation vulnerabilities like CVE-2024-9474 https://security.paloaltonetworks.com/CVE-2024-9474 .
The risk of this issue is greatly reduced if you secure access to the management web interface by restricting access to only trusted internal IP addresses according to our recommended best practice deployment guidelines https://live.paloaltonetworks.com/t5/community-blogs/tips-amp-tricks-how-to-secure-the-management-access-of-your-palo/ba-p/464431 .
This issue is applicable only to PAN-OS 10.2, PAN-OS 11.0, PAN-OS 11.1, and PAN-OS 11.2 software.
Cloud NGFW and Prisma Access are not impacted by this vulnerability. |
| A command injection as a result of arbitrary file creation vulnerability in the GlobalProtect feature of Palo Alto Networks PAN-OS software for specific PAN-OS versions and distinct feature configurations may enable an unauthenticated attacker to execute arbitrary code with root privileges on the firewall.
Cloud NGFW, Panorama appliances, and Prisma Access are not impacted by this vulnerability. |
| A privilege escalation vulnerability in Palo Alto Networks PAN-OS software allows a PAN-OS administrator with access to the management web interface to perform actions on the firewall with root privileges.
Cloud NGFW and Prisma Access are not impacted by this vulnerability. |
| An SQL injection vulnerability in Palo Alto Networks Expedition allows an unauthenticated attacker to reveal Expedition database contents, such as password hashes, usernames, device configurations, and device API keys. With this, attackers can also create and read arbitrary files on the Expedition system. |
| An OS command injection vulnerability in Palo Alto Networks Expedition allows an unauthenticated attacker to run arbitrary OS commands as root in Expedition, resulting in disclosure of usernames, cleartext passwords, device configurations, and device API keys of PAN-OS firewalls. |
| Missing authentication for a critical function in Palo Alto Networks Expedition can lead to an Expedition admin account takeover for attackers with network access to Expedition.
Note: Expedition is a tool aiding in configuration migration, tuning, and enrichment. Configuration secrets, credentials, and other data imported into Expedition is at risk due to this issue. |
| Zimbra Collaboration Suite (ZCS) 8.8.15 and 9.0 has mboximport functionality that receives a ZIP archive and extracts files from it. By bypassing authentication (i.e., not having an authtoken), an attacker can upload arbitrary files to the system, leading to directory traversal and remote code execution. NOTE: this issue exists because of an incomplete fix for CVE-2022-27925. |
| An issue was discovered in the Calendar feature in Zimbra Collaboration Suite 8.8.x before 8.8.15 patch 30 (update 1), as exploited in the wild starting in December 2021. An attacker could place HTML containing executable JavaScript inside element attributes. This markup becomes unescaped, causing arbitrary markup to be injected into the document. |
| mailboxd component in Synacor Zimbra Collaboration Suite 8.7.x before 8.7.11p10 has an XML External Entity injection (XXE) vulnerability, as demonstrated by Autodiscover/Autodiscover.xml. |
| Zimbra Collaboration Suite before 8.6 patch 13, 8.7.x before 8.7.11 patch 10, and 8.8.x before 8.8.10 patch 7 or 8.8.x before 8.8.11 patch 3 allows SSRF via the ProxyServlet component. |
| IBM Data Risk Manager 2.0.1, 2.0.2, 2.0.3, and 2.0.4 could allow a remote authenticated attacker to execute arbitrary commands on the system. IBM X-Force ID: 180533. |
| IBM Data Risk Manager 2.0.1, 2.0.2, 2.0.3, 2.0.4, 2.0.5, and 2.0.6 could allow a remote attacker to bypass security restrictions when configured with SAML authentication. By sending a specially crafted HTTP request, an attacker could exploit this vulnerability to bypass the authentication process and gain full administrative access to the system. IBM X-Force ID: 180532. |
