| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/userfaultfd: write-lock the VMA before waking waiters when unregistering
userfaultfd_unregister() wakes pending missing faults before clearing the
VMA's userfaultfd registration. With per-VMA fault locking, holding
mmap_lock for write does not prevent another fault from queuing after
the wakeup but before userfaultfd_clear_vma() write-locks the VMA. That
waiter can then remain asleep indefinitely.
Call vma_start_write() before waking waiters. Existing fault handlers
queue themselves before dropping the VMA read lock, and new readers are
excluded until mmap_write_unlock(). |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: Validate the queue state under the queue lock in the address attribute
Reading the "address" sysfs attribute calls kernel_getsockname() on the
admin queue socket, which can race with the queue teardown during
connection error recovery: a reader can observe NVME_TCP_Q_LIVE set,
then block on the queue lock while nvme_tcp_free_queue() releases the
socket and clears queue->sock without holding the lock. Once the
reader acquires the lock it dereferences the NULL socket pointer.
Commit 76d54bf20cdc ("nvme-tcp: don't access released socket during
error recovery") had the queue liveness check inside the lock.
Commit 782373ba2766 ("nvme: tcp: avoid race between queue_lock lock
and destroy") moved it back out because the lock itself is destroyed
in nvme_tcp_free_queue(), so a reader arriving late trips
mutex_destroy().
Check the queue liveness inside the queue lock, and clear queue->sock
under the same lock. The teardown clears NVME_TCP_Q_LIVE under the
lock well before the socket is released, so a reader either sees the
bit cleared or a socket that cannot be released while it holds the
lock. To also close the lock lifetime race, the queue locks are now
owned by the controller: they are initialized with the queue array and
only destroyed when the controller is freed, which cannot happen while
a sysfs attribute read is still in progress. The queue count is
computed by the NVME_TCP_OPT_NR_QUEUES() macro from the original
connect options for both initialization and destruction, as reconnects
may shrink ctrl->queue_count. |
| A security vulnerability has been detected in XiangLi1999 Diffusion-LM up to 759889d58ef38e2eed41a8c34db8032e072826f4. This issue affects the function main of the file improved-diffusion/scripts/text_sample.py. Such manipulation of the argument out_dir leads to path traversal. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The project was informed of the problem early through an issue report but has not responded yet. |
| An use of hard-coded cryptographic key vulnerability has been reported to affect Hybrid Backup Sync. If exploited, the vulnerability could allow remote attackers to compromise the security of the system.
We have already fixed the vulnerability in the following version:
Hybrid Backup Sync 26.4.0.521 and later
Hybrid Backup Sync 26.4.1.563 and later |
| An use of hard-coded cryptographic key vulnerability has been reported to affect Hybrid Backup Sync. If exploited, the vulnerability could allow remote attackers to compromise the security of the system.
We have already fixed the vulnerability in the following version:
Hybrid Backup Sync 26.4.0.521 and later
Hybrid Backup Sync 26.4.1.563 and later |
| A weakness has been identified in XiangLi1999 Diffusion-LM up to 759889d58ef38e2eed41a8c34db8032e072826f4. This vulnerability affects the function os.system of the file improved-diffusion/scripts/infill.py. This manipulation of the argument notes causes os command injection. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided. The project was informed of the problem early through an issue report but has not responded yet. |
| Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in ninenines cowlib allows unauthenticated remote denial of service via memory exhaustion.
cow_spdy:inflate/2 in cowlib passes peer-supplied compressed bytes directly to zlib:inflate/2 with no output size bound. The SPDY header compression dictionary (?ZDICT) is public, and zlib compresses long runs of repeated bytes at roughly 1024:1, so a few kilobytes of SPDY frame payload can decompress to gigabytes on the BEAM heap, OOM-killing the node. A single unauthenticated SPDY frame is sufficient to trigger the condition. The parsers for syn_stream, syn_reply, and headers frame types are all affected via cow_spdy:parse_headers/2.
This issue affects cowlib: from 0.1.0 before 2.16.1. |
| Allocation of Resources Without Limits or Throttling vulnerability in ninenines cowboy allows denial of service via unbounded buffer accumulation in multipart header parsing.
cowboy_req:read_part/3 in src/cowboy_req.erl accumulates incoming request bytes into a Buffer binary with no upper-bound check. When cow_multipart:parse_headers/2 returns more or {more, Buffer2}, the function reads up to Length bytes (default 64 KB) from the request body and recurses with the enlarged buffer. There is no equivalent of the byte_size(Acc) > Length guard present in the sibling function read_part_body/4. An unauthenticated attacker can send a multipart/form-data request whose body never yields a complete header section — for example, a body that never contains the advertised boundary delimiter, or one whose header lines never contain \r\n\r\n — and force the server process to accumulate memory linearly with the bytes the protocol layer is willing to deliver. A handful of concurrent such uploads is sufficient to exhaust BEAM memory.
The function has had two names. From 0.10.0 to 2.0.0-pre.3 it is cowboy_req:part/3, reached through cowboy_req:part/1 and cowboy_req:part/2. From 2.0.0-pre.4 it is cowboy_req:read_part/3, reached through cowboy_req:read_part/1 and cowboy_req:read_part/2. Both have the same buffer loop.
This issue affects cowboy: from 0.10.0 before 2.15.0. |
| In the Linux kernel, the following vulnerability has been resolved:
inet: reject unhashed sockets during established lookups
TCP established ehash lookups are lockless. The socket caches involved
use SLAB_TYPESAFE_BY_RCU, so memory can be reused before an RCU reader
that retained its old address has finished.
After a tuple match, __inet_lookup_established() and
__inet6_lookup_established() acquire a reference and repeat the tuple
check. They do not check whether the new object is hashed. If the
address is reused for a socket with the same tuple, the lookup can
acquire a reference to the new object and return it while its nulls node
is unhashed.
A PoC that drives reuse with a SYN cookie request socket reproduced the
crash. The new request socket is unhashed and has a NULL rsk_listener.
A lookup that had loaded the address of the old request socket acquired
the reference published by tcp_get_cookie_sock() and returned the new
object. tcp_v4_rcv() then read sk_state through the NULL listener.
The resulting crash was:
BUG: kernel NULL pointer dereference, address: 0000000000000012
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
...
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 4 UID: 0 PID: 0 Comm: swapper/4 Not tainted 7.3.0-00591-g0e135910deec #1 PREEMPT(lazy)
...
RIP: 0010:tcp_v4_rcv+0x44e/0x1280
...
R10: 0000000000000001 R11: 00000000024ca8c0 R12: 0000000000000000
...
CR2: 0000000000000012 CR3: 0000000103d50004 CR4: 0000000000770ef0
...
Call Trace:
<IRQ>
? raw_local_deliver+0xae/0x240
ip_protocol_deliver_rcu+0x2d/0x180
ip_local_deliver_finish+0x84/0x100
ip_sublist_rcv_finish+0x5f/0x70
ip_sublist_rcv+0x12a/0x1d0
ip_list_rcv+0xfd/0x130
__netif_receive_skb_list_core+0x223/0x250
netif_receive_skb_list_internal+0x1d2/0x2c0
? try_fill_recv+0x39/0x7b0
napi_complete_done+0x74/0x170
virtnet_poll+0x445/0x600
__napi_poll+0x27/0x1e0
net_rx_action+0x2fe/0x3b0
handle_softirqs+0xc2/0x2c0
__irq_exit_rcu+0x74/0xd0
common_interrupt+0x7f/0x90
</IRQ>
...
Kernel panic - not syncing: Fatal exception in interrupt
After taking a reference, check whether the nulls node is unhashed in
both IPv4 and IPv6 established lookups. If it is unhashed or the tuple
no longer matches, drop the reference and restart the lookup.
Lookups racing with the TIME_WAIT hashdance, or with a request being
replaced by its child, now restart and find the new socket instead of
returning the old one.
Request sockets that were never inserted into ehash can have a nonzero
refcount, and a stale lookup can hold a transient reference. Therefore,
when SYN cookie, Fast Open, and request migration paths fail after
setting a nonzero refcount, release the references held by those paths
with reqsk_put() instead of freeing the request directly. |
| Timezone cache use-after-free can lead to remote code execution.
In non-thread-safe builds, a diagnostic written to a file-based error_log during module startup, for example for an invalid date.timezone value or a session configuration warning, causes the timezone cache to be allocated in startup memory that is freed while a reference to it is kept. A diagnostic raised early in the first request of a worker, such as the max_input_vars warning, then accesses the freed cache. On such a deployment an unauthenticated remote attacker can crash PHP-FPM, Apache mod_php or CGI workers with a crafted request. Arbitrary code execution may be possible and has been demonstrated with known memory addresses.
This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13. |
| Use-after-free in magic method backtraces can lead to remote code execution.
When collecting the arguments of a method call handled by __call() or __callStatic() for a backtrace, PHP can read stale values that may refer to freed memory. If a fatal error such as exceeding memory_limit occurs while an application enters such a call, with fatal_error_backtraces enabled (the default) and zend.exception_ignore_args disabled, a remote attacker who controls enough request data to influence memory allocation may cause memory corruption, crash the PHP worker or, with knowledge of memory addresses, execute arbitrary code. php.ini-production enables zend.exception_ignore_args, which prevents this.
This issue affects PHP versions 8.5.* before 8.5.13. |
| PHP-FPM request smuggling through an unread HTTP request body.
PHP does not discard the unread part of an HTTP request body at request shutdown when the application has opened php://input without reading it to the end. When the front end reuses backend connections, which is not the default in nginx or Apache (for example nginx with fastcgi_keep_conn on, or Apache mod_proxy_fcgi with enablereuse=on), PHP-FPM can parse the leftover bytes as a new FastCGI request. An unauthenticated remote attacker can use a single crafted multipart/form-data request to forge a backend request with chosen parameters such as SCRIPT_FILENAME, REMOTE_ADDR and PHP_ADMIN_VALUE, which can lead to execution of attacker-controlled PHP code. With LSAPI, subsequent requests on the connection can be disrupted.
This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13. |
| Use-after-free via repopulation of last_fatal_error_backtrace global after shutdown.
A fatal error raised while modified INI settings are restored during request shutdown can repopulate the stored fatal error backtrace after the executor has been cleaned up. The request memory is then freed, and a diagnostic emitted before executor initialization in a later request handled by the same PHP-FPM or mod_php worker can access the stale backtrace. The shutdown error requires per-path configuration of max_memory_limit, or of zlib.output_compression together with output_handler (which .user.ini can also set). The early diagnostic requires Apache per-directory configuration or, for PHP-FPM, a PHP_VALUE or PHP_ADMIN_VALUE parameter sent by the front end. This can cause memory corruption and worker crashes, and may allow remote code execution.
This issue affects PHP versions 8.5.* before 8.5.13. |
| A maliciously crafted SBSAR file, when imported or loaded through the Substance in 3ds Max plugin in Autodesk 3ds Max, can trigger an Out-of-Bounds Write vulnerability. A malicious actor may leverage this vulnerability to cause an application crash, data corruption, or potentially execute arbitrary code in the context of the current process. |
| Partially overwritten session files can lead to remote code execution.
The files session save handler, which is the default, writes updated session data into the existing session file without first clearing it. If a write is interrupted, the file can contain the beginning of the new session followed by the end of the old one, and bytes of an ordinary string can later be unserialized as objects. An attacker who can influence the session data, for example through session upload progress, and interrupt a write at a suitable point may inject objects, which can lead to code execution when the application contains a suitable gadget chain. Session data can also be corrupted.
This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13. |
| VMware Tools for Windows contains a SAML token signature bypass vulnerability.
Affected versions: 13.x.x.x (fixed in 13.1.5.0); 12.3.x (fixed in 12.5.5). |
| SDDC Manager contains a local privilege-escalation vulnerability.
Affected versions: 9.1.x.x (fixed in 9.1.1.0200); 9.0.x.x (fixed in 9.0.2.0100); 5.x (fixed in 5.2.5). |
| SDDC Manager contains an authenticated command-injection vulnerability due to improper sanitization of user-supplied input.
Affected versions: 9.1.x.x (fixed in 9.1.1.0200); 9.0.x.x (fixed in 9.0.2.0100); 5.x (fixed in 5.2.5). |
| SDDC Manager contains an SQL-injection vulnerability due to improper sanitization of user-supplied input.
Affected versions: 9.1.x.x (fixed in 9.1.1.0200); 9.0.x.x (fixed in 9.0.2.0100); 5.x (fixed in 5.2.5). |
| VMware vCenter contains an authentication bypass vulnerability in the VMware Directory Service.
Affected versions: 9.1.x (fixed in 9.1.1.0200); 9.0.x (fixed in 9.0.2.0200); 8.0 (fixed in 8.0 U3m); 5.x (fixed in 5.2.5).
Telco Cloud Platform 3.0, 4.x, 5.0.x, 5.1.x, 5.2 and Telco Cloud Infrastructure 3.0 are also affected (see KB463116). |