| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was determined in BillaBear up to 2025.01.03. Affected by this issue is the function processInstall of the file src/BillaBear/Controller/InstallController.php of the component Installation Handler. This manipulation causes missing authentication. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| The GiveWP WordPress plugin before 4.19.0.1 does not restrict the currency of a donation to the one the site or form accepts, while comparing its amount limits as bare numbers, allowing unauthenticated users to make donations below a form's configured minimum or fixed amount. |
| Apache Traffic Server's experimental tsmemcache plugin allows unauthenticated network read, write, and deletion of the shared proxy cache.
This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0.
Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue. |
| Apache Traffic Server's experimental magick plugin lets an unauthenticated client control ImageMagick convert arguments in its default (unsigned) configuration.
This issue affects Apache Traffic Server: from 8.0.1 through 8.1.11, from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0.
Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue. |
| Apache Traffic Server forwarded a malformed 302 response that should have been rejected as a parse error, because the Transfer-Encoding: chunked carve-out bypassed the rejection path. A response that two peers can read differently is then stored and served, allowing cache poisoning and response-framing desync.
This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0.
Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue. |
| A vulnerability was identified in rathena FluxCP up to 98cd4b8fd83228c11b36fb3d097b8e0f7c105a8d. This issue affects the function verifyiprange of the file lib/Flux/PaymentNotifyRequest.php of the component PayPal IPN Handler. The manipulation of the argument X-Real-IP leads to origin validation error. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw was found in BusyBox dpkg. The write_status_file() function does not reset a field cursor between package stanzas. When two packages are removed in a single invocation and the first stanza is larger than the second, the second package stanza can be dropped from the status file, causing limited data corruption. |
| A vulnerability has been found in Edimax BR-6208AC 1.32. This vulnerability affects unknown code of the component Virtual Server Page. The manipulation leads to cross site scripting. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in Oray Pugongying X5 Pro 7.6.1. Affected by this issue is the function plugin_init of the file /tmp/upload_files of the component PPPoE WAN Setting Handler. Such manipulation of the argument pppd_options leads to unrestricted upload. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| SOEM version 2.0.0 and earlier contains multiple vulnerabilities in frame processing where a malicious device can cause the master to read data outside allocated buffers. The software uses length and offset values from device messages without validating them against buffer sizes. This can cause the master to access invalid memory locations, potentially disclosing sensitive information or causing crashes. |
| SOEM version 2.0.0 and earlier contains a vulnerability in multi-segment data transfers where a malicious device can overflow memory buffers. The software checks the total size only once at the beginning, but doesn't track the cumulative size as multiple segments arrive. An attacker can declare a small initial size to pass validation, then send additional segments that exceed the allocated buffer. This allows the attacker to write controlled data beyond buffer boundaries, potentially enabling code execution. |
| Incorrect Privilege Assignment vulnerability in Kodezen LLC aBlocks ablocks allows Privilege Escalation.This issue affects aBlocks: from n/a before 2.9.1. |
| A security vulnerability has been detected in Oray Pugongying X5 Pro 7.6.1. This impacts an unknown function of the component Dnsmasq. The manipulation of the argument rent_time leads to crlf injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Remove sink usage from DPMS
[Why]
stream->sink is optional and can be null, so should always be checked
before dereference. Additionally, most of its usage in DPMS sequences
is for stream->sink->link, which can be replaced with stream->link,
as the two should always be the same.
[How]
* Replace stream->sink->link in DPMS on/off
* Add assert to USB4 BW allocation where sink is required
* Avoid inconsistencies in resource access, e.g. don't repeat
stream->link after it was already saved to a local variable
* Pull out effective VPG calculation to helper getter
* Formatting fixes |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: check link is beaconing for color change
When trying to do a color change, validate that the link is
beaconing first, to avoid calling the driver with an invalid
link. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: oss: Reject reads that cannot fit the next event
snd_seq_oss_read() checks whether the next queued OSS sequencer event
fits in the remaining userspace buffer before removing it from the read
queue.
The check is inverted. It currently stops when the event is smaller than
the remaining buffer, so a normal 4-byte event is not copied for an
8-byte read buffer. Conversely, an 8-byte event can be copied for a
smaller read count.
Break only when the remaining userspace buffer is smaller than the next
event, and report -EINVAL if no complete event has been copied. This
prevents an undersized read from looking like end-of-file while leaving
the event queued for a later read with a large enough buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: fix the error path in dpaa2_switch_rx()
In case of an error in dpaa2_switch_rx(), the dpaa2_switch_free_fd()
function is called in order to free the FD. This is incorrect since the
dpaa2_switch_free_fd() is intended to be used on Tx frame descriptors,
meaning that it expects in the software annotation area of the FD data
to find a valid skb pointer on which to call dev_kfree_skb().
Fix this by extracting the dma_unmap_page() from
dpaa2_switch_build_linear_skb() directly into the dpaa2_switch_rx()
function. This allows us to directly use free_pages() in case of an
error before an SKB was created and kfree_skb() afterwards. |
| In the Linux kernel, the following vulnerability has been resolved:
net: lan966x: restore RX state on reload failure
lan966x_fdma_reload() backs up rx->page_pool and rx->fdma before
reallocating the RX resources for the new MTU. If the allocation fails,
the restore path puts these fields back before restarting RX.
However, the reload path also updates rx->page_order and rx->max_mtu
before calling lan966x_fdma_rx_alloc(). These fields are not restored on
failure, so RX can be restarted with the old pages, old FDMA state and
old page pool, but with the page geometry from the failed new MTU.
This can make the XDP path advertise a frame size derived from the new
page_order while the actual RX pages still come from the old allocation.
For example, after a failed reload to a jumbo MTU, xdp_init_buff() may be
called with a frame size larger than the restored RX pages.
lan966x_fdma_rx_alloc_page_pool() also registers the newly allocated page
pool with each port's XDP RXQ before fdma_alloc_coherent() is called. If
fdma_alloc_coherent() fails, the new page pool is destroyed, but the
rollback path does not restore the per-port XDP RXQ mem model
registration either.
Save and restore rx->page_order and rx->max_mtu, and restore the old page
pool registration for each port's XDP RXQ before RX is started again.
This keeps the restored RX state consistent after a failed reload. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: imx: Use devm_pm_runtime_enable()
sashiko complained about early usage of the device while probe isn't
completed. This can be mitigated by delaying the pm_runtime_enable()
into the removal path instead doing it early. This ensures that in an
error case the device is removed (and imx_mu_shutdown()) before
pm_runtime_disable() so we don't have to do this manually.
For the order to work, lets move devm_mbox_controller_register() until
after the pm-runtime part. So the reverse order will be mbox-controller
removal followed by disabling pm runtime.
Use devm_pm_runtime_enable(), remove manual pm_runtime_disable()
invocations and move the pm_runtime handling in probe before
devm_mbox_controller_register(). |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5: let stripe batch bm_seq comparison wrap-safe
Once the 32-bit seq wraps, a newer bm_seq can look smaller
than old, so .. covert to wrap-safe calculate way. |
