| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| SkyStream EMR5000 1.16 through 1.18 does not drop packets or disable the Ethernet interface when the buffers are full, which allows remote attackers to cause a denial of service (null pointer exception and kernel panic) via a large number of packets. |
| ftutil.c in Freetype before 2.2 allows remote attackers to cause a denial of service (crash) via a crafted font file that triggers a null dereference. |
| mah-jong before 1.6.2 allows remote attackers to cause a denial of service (server crash) via a missing argument, which triggers a null pointer dereference. |
| The Negotiate Security Software Provider (SSP) interface in Windows 2000, Windows XP, and Windows Server 2003, allows remote attackers to cause a denial of service (crash from null dereference) or execute arbitrary code via a crafted SPNEGO NegTokenInit request during authentication protocol selection. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: detach and close netdevs while handling a reset
Protect the reset path from callbacks by setting the netdevs to detached
state and close any netdevs in UP state until the reset handling has
completed. During a reset, the driver will de-allocate resources for the
vport, and there is no guarantee that those will recover, which is why the
existing vport_ctrl_lock does not provide sufficient protection.
idpf_detach_and_close() is called right before reset handling. If the
reset handling succeeds, the netdevs state is recovered via call to
idpf_attach_and_open(). If the reset handling fails the netdevs remain
down. The detach/down calls are protected with RTNL lock to avoid racing
with callbacks. On the recovery side the attach can be done without
holding the RTNL lock as there are no callbacks expected at that point,
due to detach/close always being done first in that flow.
The previous logic restoring the netdevs state based on the
IDPF_VPORT_UP_REQUESTED flag in the init task is not needed anymore, hence
the removal of idpf_set_vport_state(). The IDPF_VPORT_UP_REQUESTED is
still being used to restore the state of the netdevs following the reset,
but has no use outside of the reset handling flow.
idpf_init_hard_reset() is converted to void, since it was used as such and
there is no error handling being done based on its return value.
Before this change, invoking hard and soft resets simultaneously will
cause the driver to lose the vport state:
ip -br a
<inf> UP
echo 1 > /sys/class/net/ens801f0/device/reset& \
ethtool -L ens801f0 combined 8
ip -br a
<inf> DOWN
ip link set <inf> up
ip -br a
<inf> DOWN
Also in case of a failure in the reset path, the netdev is left
exposed to external callbacks, while vport resources are not
initialized, leading to a crash on subsequent ifup/down:
[408471.398966] idpf 0000:83:00.0: HW reset detected
[408471.411744] idpf 0000:83:00.0: Device HW Reset initiated
[408472.277901] idpf 0000:83:00.0: The driver was unable to contact the device's firmware. Check that the FW is running. Driver state= 0x2
[408508.125551] BUG: kernel NULL pointer dereference, address: 0000000000000078
[408508.126112] #PF: supervisor read access in kernel mode
[408508.126687] #PF: error_code(0x0000) - not-present page
[408508.127256] PGD 2aae2f067 P4D 0
[408508.127824] Oops: Oops: 0000 [#1] SMP NOPTI
...
[408508.130871] RIP: 0010:idpf_stop+0x39/0x70 [idpf]
...
[408508.139193] Call Trace:
[408508.139637] <TASK>
[408508.140077] __dev_close_many+0xbb/0x260
[408508.140533] __dev_change_flags+0x1cf/0x280
[408508.140987] netif_change_flags+0x26/0x70
[408508.141434] dev_change_flags+0x3d/0xb0
[408508.141878] devinet_ioctl+0x460/0x890
[408508.142321] inet_ioctl+0x18e/0x1d0
[408508.142762] ? _copy_to_user+0x22/0x70
[408508.143207] sock_do_ioctl+0x3d/0xe0
[408508.143652] sock_ioctl+0x10e/0x330
[408508.144091] ? find_held_lock+0x2b/0x80
[408508.144537] __x64_sys_ioctl+0x96/0xe0
[408508.144979] do_syscall_64+0x79/0x3d0
[408508.145415] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[408508.145860] RIP: 0033:0x7f3e0bb4caff |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: Fix RSS LUT NULL ptr issue after soft reset
During soft reset, the RSS LUT is freed and not restored unless the
interface is up. If an ethtool command that accesses the rss lut is
attempted immediately after reset, it will result in NULL ptr
dereference. Also, there is no need to reset the rss lut if the soft reset
does not involve queue count change.
After soft reset, set the RSS LUT to default values based on the updated
queue count only if the reset was a result of a queue count change and
the LUT was not configured by the user. In all other cases, don't touch
the LUT.
Steps to reproduce:
** Bring the interface down (if up)
ifconfig eth1 down
** update the queue count (eg., 27->20)
ethtool -L eth1 combined 20
** display the RSS LUT
ethtool -x eth1
[82375.558338] BUG: kernel NULL pointer dereference, address: 0000000000000000
[82375.558373] #PF: supervisor read access in kernel mode
[82375.558391] #PF: error_code(0x0000) - not-present page
[82375.558408] PGD 0 P4D 0
[82375.558421] Oops: Oops: 0000 [#1] SMP NOPTI
<snip>
[82375.558516] RIP: 0010:idpf_get_rxfh+0x108/0x150 [idpf]
[82375.558786] Call Trace:
[82375.558793] <TASK>
[82375.558804] rss_prepare.isra.0+0x187/0x2a0
[82375.558827] rss_prepare_data+0x3a/0x50
[82375.558845] ethnl_default_doit+0x13d/0x3e0
[82375.558863] genl_family_rcv_msg_doit+0x11f/0x180
[82375.558886] genl_rcv_msg+0x1ad/0x2b0
[82375.558902] ? __pfx_ethnl_default_doit+0x10/0x10
[82375.558920] ? __pfx_genl_rcv_msg+0x10/0x10
[82375.558937] netlink_rcv_skb+0x58/0x100
[82375.558957] genl_rcv+0x2c/0x50
[82375.558971] netlink_unicast+0x289/0x3e0
[82375.558988] netlink_sendmsg+0x215/0x440
[82375.559005] __sys_sendto+0x234/0x240
[82375.559555] __x64_sys_sendto+0x28/0x30
[82375.560068] x64_sys_call+0x1909/0x1da0
[82375.560576] do_syscall_64+0x7a/0xfa0
[82375.561076] ? clear_bhb_loop+0x60/0xb0
[82375.561567] entry_SYSCALL_64_after_hwframe+0x76/0x7e
<snip> |
| Null pointer dereference in Windows LDAP - Lightweight Directory Access Protocol allows an unauthorized attacker to deny service over a network. |
| The application does not validate the presence of required appearance (AP) data before accessing stamp annotation resources. When a PDF contains a stamp annotation missing its AP entry, the code continues to dereference the associated object without a prior null or validity check, which allows a crafted document to trigger a null pointer dereference and crash the application, resulting in denial of service. |
| In systemd 260 before 261, a local unprivileged user can trigger an assert via an IPC API call with an array or map that has a null element. |
| A null pointer dereference in Palo Alto Networks PAN-OS software on PA-800 Series, PA-3200 Series, PA-5200 Series, and PA-7000 Series hardware platforms when Decryption policy is enabled allows an unauthenticated attacker to crash PAN-OS by sending specific traffic through the data plane, resulting in a denial of service (DoS) condition. Repeated attempts to trigger this condition will result in PAN-OS entering maintenance mode.
Palo Alto Networks VM-Series, Cloud NGFW, and Prisma Access are not affected.
This issue only affects PA-800 Series, PA-3200 Series, PA-5200 Series, and PA-7000 Series running these specific versions of PAN-OS:
* 10.2.7-h12
* 10.2.8-h10
* 10.2.9-h9
* 10.2.9-h11
* 10.2.10-h2
* 10.2.10-h3
* 10.2.11
* 10.2.11-h1
* 10.2.11-h2
* 10.2.11-h3
* 11.1.2-h9
* 11.1.2-h12
* 11.1.3-h2
* 11.1.3-h4
* 11.1.3-h6
* 11.2.2
* 11.2.2-h1 |
| GNU Midnight Commander 4.8.29-146-g299d9a2fb was discovered to contain a NULL pointer dereference via the function x_error_handler() at tty/x11conn.c. NOTE: this is disputed because it should be categorized as a usability problem (an X operation silently fails). |
| Cairo through 1.18.4, as used in Poppler through 25.08.0, has an "unscaled->face == NULL" assertion failure for _cairo_ft_unscaled_font_fini in cairo-ft-font.c. |
| SAP NetWeaver Application Server for ABAP and ABAP Platform allows an unauthenticated attacker to send a maliciously crafted http request which could cause a null pointer dereference in the kernel. This dereference will result in the system crashing and rebooting, causing the system to be temporarily unavailable. There is no impact on Confidentiality or Integrity. |
| An issue in MiniZinc before 2.8.0 allows a NULL pointer dereference via ti_expr in a crafted .mzn file. NOTE: this is disputed because there is no common libminizinc use case in which an unattended process is supposed to run forever to process a series of atttacker-controlled .mzn files. |
| simple-dhcp-server through ec976d2 allows remote attackers to cause a denial of service (daemon crash) by sending a DHCP packet without any option fields, which causes free_packet in dhcp_packet.c to dereference a NULL pointer. |
| If a DHCPv4 client sends a request with some specific options, and Kea fails to find an appropriate subnet for the client, the `kea-dhcp4` process will abort with an assertion failure. This happens only if the client request is unicast directly to Kea; broadcast messages do not cause the problem.
This issue affects Kea versions 2.7.1 through 2.7.9, 3.0.0, and 3.1.0. |
| A null pointer dereference vulnerability exists in the IOMap64.sys driver of ASUS AI Suite 3. The vulnerability can be triggered by a specially crafted input, which may lead to a system crash (BSOD). Refer to the '
Security Update for for AI Suite 3
' section on the ASUS Security Advisory for more information. |
| A vulnerability was found in RefindPlusRepo RefindPlus 0.14.2.AB and classified as problematic. Affected by this issue is the function GetDebugLogFile of the file Library/MemLogLib/BootLog.c. The manipulation leads to null pointer dereference. Attacking locally is a requirement. The patch is identified as d2143a1e2deefddd9b105fb7160763c4f8d47ea2. It is recommended to apply a patch to fix this issue. |
| A vulnerability was found in Artifex GhostPDL up to 3989415a5b8e99b9d1b87cc9902bde9b7cdea145. It has been classified as problematic. This affects the function pdf_ferror of the file devices/vector/gdevpdf.c of the component New Output File Open Error Handler. The manipulation leads to null pointer dereference. It is possible to initiate the attack remotely. The identifier of the patch is 619a106ba4c4abed95110f84d5efcd7aee38c7cb. It is recommended to apply a patch to fix this issue. |
| robdns commit d76d2e6 was discovered to contain a NULL pointer dereference via the item->tokens component at /src/conf-parse.c. |
