| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: sparx5: Fix use after free inside sparx5_del_mact_entry
Based on the static analyzis of the code it looks like when an entry
from the MAC table was removed, the entry was still used after being
freed. More precise the vid of the mac_entry was used after calling
devm_kfree on the mac_entry.
The fix consists in first using the vid of the mac_entry to delete the
entry from the HW and after that to free it. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/debug_vm_pgtable: fix BUG_ON with pud advanced test
Architectures like powerpc add debug checks to ensure we find only devmap
PUD pte entries. These debug checks are only done with CONFIG_DEBUG_VM.
This patch marks the ptes used for PUD advanced test devmap pte entries so
that we don't hit on debug checks on architecture like ppc64 as below.
WARNING: CPU: 2 PID: 1 at arch/powerpc/mm/book3s64/radix_pgtable.c:1382 radix__pud_hugepage_update+0x38/0x138
....
NIP [c0000000000a7004] radix__pud_hugepage_update+0x38/0x138
LR [c0000000000a77a8] radix__pudp_huge_get_and_clear+0x28/0x60
Call Trace:
[c000000004a2f950] [c000000004a2f9a0] 0xc000000004a2f9a0 (unreliable)
[c000000004a2f980] [000d34c100000000] 0xd34c100000000
[c000000004a2f9a0] [c00000000206ba98] pud_advanced_tests+0x118/0x334
[c000000004a2fa40] [c00000000206db34] debug_vm_pgtable+0xcbc/0x1c48
[c000000004a2fc10] [c00000000000fd28] do_one_initcall+0x60/0x388
Also
kernel BUG at arch/powerpc/mm/book3s64/pgtable.c:202!
....
NIP [c000000000096510] pudp_huge_get_and_clear_full+0x98/0x174
LR [c00000000206bb34] pud_advanced_tests+0x1b4/0x334
Call Trace:
[c000000004a2f950] [000d34c100000000] 0xd34c100000000 (unreliable)
[c000000004a2f9a0] [c00000000206bb34] pud_advanced_tests+0x1b4/0x334
[c000000004a2fa40] [c00000000206db34] debug_vm_pgtable+0xcbc/0x1c48
[c000000004a2fc10] [c00000000000fd28] do_one_initcall+0x60/0x388 |
| In the Linux kernel, the following vulnerability has been resolved:
stmmac: Clear variable when destroying workqueue
Currently when suspending driver and stopping workqueue it is checked whether
workqueue is not NULL and if so, it is destroyed.
Function destroy_workqueue() does drain queue and does clear variable, but
it does not set workqueue variable to NULL. This can cause kernel/module
panic if code attempts to clear workqueue that was not initialized.
This scenario is possible when resuming suspended driver in stmmac_resume(),
because there is no handling for failed stmmac_hw_setup(),
which can fail and return if DMA engine has failed to initialize,
and workqueue is initialized after DMA engine.
Should DMA engine fail to initialize, resume will proceed normally,
but interface won't work and TX queue will eventually timeout,
causing 'Reset adapter' error.
This then does destroy workqueue during reset process.
And since workqueue is initialized after DMA engine and can be skipped,
it will cause kernel/module panic.
To secure against this possible crash, set workqueue variable to NULL when
destroying workqueue.
Log/backtrace from crash goes as follows:
[88.031977]------------[ cut here ]------------
[88.031985]NETDEV WATCHDOG: eth0 (sxgmac): transmit queue 1 timed out
[88.032017]WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:477 dev_watchdog+0x390/0x398
<Skipping backtrace for watchdog timeout>
[88.032251]---[ end trace e70de432e4d5c2c0 ]---
[88.032282]sxgmac 16d88000.ethernet eth0: Reset adapter.
[88.036359]------------[ cut here ]------------
[88.036519]Call trace:
[88.036523] flush_workqueue+0x3e4/0x430
[88.036528] drain_workqueue+0xc4/0x160
[88.036533] destroy_workqueue+0x40/0x270
[88.036537] stmmac_fpe_stop_wq+0x4c/0x70
[88.036541] stmmac_release+0x278/0x280
[88.036546] __dev_close_many+0xcc/0x158
[88.036551] dev_close_many+0xbc/0x190
[88.036555] dev_close.part.0+0x70/0xc0
[88.036560] dev_close+0x24/0x30
[88.036564] stmmac_service_task+0x110/0x140
[88.036569] process_one_work+0x1d8/0x4a0
[88.036573] worker_thread+0x54/0x408
[88.036578] kthread+0x164/0x170
[88.036583] ret_from_fork+0x10/0x20
[88.036588]---[ end trace e70de432e4d5c2c1 ]---
[88.036597]Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 |
| In the Linux kernel, the following vulnerability has been resolved:
minix: Add required sanity checking to minix_check_superblock()
The fs/minix implementation of the minix filesystem does not currently
support any other value for s_log_zone_size than 0. This is also the
only value supported in util-linux; see mkfs.minix.c line 511. In
addition, this patch adds some sanity checking for the other minix
superblock fields, and moves the minix_blocks_needed() checks for the
zmap and imap also to minix_check_super_block().
This also closes a related syzbot bug report. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: fix data-race in ipv6_mc_down / mld_ifc_work
idev->mc_ifc_count can be written over without proper locking.
Originally found by syzbot [1], fix this issue by encapsulating calls
to mld_ifc_stop_work() (and mld_gq_stop_work() for good measure) with
mutex_lock() and mutex_unlock() accordingly as these functions
should only be called with mc_lock per their declarations.
[1]
BUG: KCSAN: data-race in ipv6_mc_down / mld_ifc_work
write to 0xffff88813a80c832 of 1 bytes by task 3771 on cpu 0:
mld_ifc_stop_work net/ipv6/mcast.c:1080 [inline]
ipv6_mc_down+0x10a/0x280 net/ipv6/mcast.c:2725
addrconf_ifdown+0xe32/0xf10 net/ipv6/addrconf.c:3949
addrconf_notify+0x310/0x980
notifier_call_chain kernel/notifier.c:93 [inline]
raw_notifier_call_chain+0x6b/0x1c0 kernel/notifier.c:461
__dev_notify_flags+0x205/0x3d0
dev_change_flags+0xab/0xd0 net/core/dev.c:8685
do_setlink+0x9f6/0x2430 net/core/rtnetlink.c:2916
rtnl_group_changelink net/core/rtnetlink.c:3458 [inline]
__rtnl_newlink net/core/rtnetlink.c:3717 [inline]
rtnl_newlink+0xbb3/0x1670 net/core/rtnetlink.c:3754
rtnetlink_rcv_msg+0x807/0x8c0 net/core/rtnetlink.c:6558
netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2545
rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6576
netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline]
netlink_unicast+0x589/0x650 net/netlink/af_netlink.c:1368
netlink_sendmsg+0x66e/0x770 net/netlink/af_netlink.c:1910
...
write to 0xffff88813a80c832 of 1 bytes by task 22 on cpu 1:
mld_ifc_work+0x54c/0x7b0 net/ipv6/mcast.c:2653
process_one_work kernel/workqueue.c:2627 [inline]
process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2700
worker_thread+0x525/0x730 kernel/workqueue.c:2781
... |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: validate num_ifs to prevent out-of-bounds write
The driver obtains sw_attr.num_ifs from firmware via dpsw_get_attributes()
but never validates it against DPSW_MAX_IF (64). This value controls
iteration in dpaa2_switch_fdb_get_flood_cfg(), which writes port indices
into the fixed-size cfg->if_id[DPSW_MAX_IF] array. When firmware reports
num_ifs >= 64, the loop can write past the array bounds.
Add a bound check for num_ifs in dpaa2_switch_init().
dpaa2_switch_fdb_get_flood_cfg() appends the control interface (port
num_ifs) after all matched ports. When num_ifs == DPSW_MAX_IF and all
ports match the flood filter, the loop fills all 64 slots and the control
interface write overflows by one entry.
The check uses >= because num_ifs == DPSW_MAX_IF is also functionally
broken.
build_if_id_bitmap() silently drops any ID >= 64:
if (id[i] < DPSW_MAX_IF)
bmap[id[i] / 64] |= ... |
| In the Linux kernel, the following vulnerability has been resolved:
net: do not pass flow_id to set_rps_cpu()
Blamed commit made the assumption that the RPS table for each receive
queue would have the same size, and that it would not change.
Compute flow_id in set_rps_cpu(), do not assume we can use the value
computed by get_rps_cpu(). Otherwise we risk out-of-bound access
and/or crashes. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: ring-buffer: Fix to check event length before using
Check the event length before adding it for accessing next index in
rb_read_data_buffer(). Since this function is used for validating
possibly broken ring buffers, the length of the event could be broken.
In that case, the new event (e + len) can point a wrong address.
To avoid invalid memory access at boot, check whether the length of
each event is in the possible range before using it. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Fix pci_slot_trylock() error handling
Commit a4e772898f8b ("PCI: Add missing bridge lock to pci_bus_lock()")
delegates the bridge device's pci_dev_trylock() to pci_bus_trylock() in
pci_slot_trylock(), but it forgets to remove the corresponding
pci_dev_unlock() when pci_bus_trylock() fails.
Before a4e772898f8b, the code did:
if (!pci_dev_trylock(dev)) /* <- lock bridge device */
goto unlock;
if (dev->subordinate) {
if (!pci_bus_trylock(dev->subordinate)) {
pci_dev_unlock(dev); /* <- unlock bridge device */
goto unlock;
}
}
After a4e772898f8b the bridge-device lock is no longer taken, but the
pci_dev_unlock(dev) on the failure path was left in place, leading to the
bug.
This yields one of two errors:
1. A warning that the lock is being unlocked when no one holds it.
2. An incorrect unlock of a lock that belongs to another thread.
Fix it by removing the now-redundant pci_dev_unlock(dev) on the failure
path.
[Same patch later posted by Keith at
https://patch.msgid.link/20260116184150.3013258-1-kbusch@meta.com] |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Make cpumask_of_node() robust against NUMA_NO_NODE
The arch definition of cpumask_of_node() cannot handle NUMA_NO_NODE -
which is a valid index - so add a check for this. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: pci: validate sequence number of TX release report
Hardware rarely reports abnormal sequence number in TX release report,
which will access out-of-bounds of wd_ring->pages array, causing NULL
pointer dereference.
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 1085 Comm: irq/129-rtw89_p Tainted: G S U
6.1.145-17510-g2f3369c91536 #1 (HASH:69e8 1)
Call Trace:
<IRQ>
rtw89_pci_release_tx+0x18f/0x300 [rtw89_pci (HASH:4c83 2)]
rtw89_pci_napi_poll+0xc2/0x190 [rtw89_pci (HASH:4c83 2)]
net_rx_action+0xfc/0x460 net/core/dev.c:6578 net/core/dev.c:6645 net/core/dev.c:6759
handle_softirqs+0xbe/0x290 kernel/softirq.c:601
? rtw89_pci_interrupt_threadfn+0xc5/0x350 [rtw89_pci (HASH:4c83 2)]
__local_bh_enable_ip+0xeb/0x120 kernel/softirq.c:499 kernel/softirq.c:423
</IRQ>
<TASK>
rtw89_pci_interrupt_threadfn+0xf8/0x350 [rtw89_pci (HASH:4c83 2)]
? irq_thread+0xa7/0x340 kernel/irq/manage.c:0
irq_thread+0x177/0x340 kernel/irq/manage.c:1205 kernel/irq/manage.c:1314
? thaw_kernel_threads+0xb0/0xb0 kernel/irq/manage.c:1202
? irq_forced_thread_fn+0x80/0x80 kernel/irq/manage.c:1220
kthread+0xea/0x110 kernel/kthread.c:376
? synchronize_irq+0x1a0/0x1a0 kernel/irq/manage.c:1287
? kthread_associate_blkcg+0x80/0x80 kernel/kthread.c:331
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>
To prevent crash, validate rpp_info.seq before using. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: cls_u32: Undo tcf_bind_filter if u32_replace_hw_knode
When u32_replace_hw_knode fails, we need to undo the tcf_bind_filter
operation done at u32_set_parms. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Fix NULL dereference in ni_write_inode
Syzbot reports a NULL dereference in ni_write_inode.
When creating a new inode, if allocation fails in mi_init function
(called in mi_format_new function), mi->mrec is set to NULL.
In the error path of this inode creation, mi->mrec is later
dereferenced in ni_write_inode.
Add a NULL check to prevent NULL dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
netlink: fix potential deadlock in netlink_set_err()
syzbot reported a possible deadlock in netlink_set_err() [1]
A similar issue was fixed in commit 1d482e666b8e ("netlink: disable IRQs
for netlink_lock_table()") in netlink_lock_table()
This patch adds IRQ safety to netlink_set_err() and __netlink_diag_dump()
which were not covered by cited commit.
[1]
WARNING: possible irq lock inversion dependency detected
6.4.0-rc6-syzkaller-00240-g4e9f0ec38852 #0 Not tainted
syz-executor.2/23011 just changed the state of lock:
ffffffff8e1a7a58 (nl_table_lock){.+.?}-{2:2}, at: netlink_set_err+0x2e/0x3a0 net/netlink/af_netlink.c:1612
but this lock was taken by another, SOFTIRQ-safe lock in the past:
(&local->queue_stop_reason_lock){..-.}-{2:2}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(nl_table_lock);
local_irq_disable();
lock(&local->queue_stop_reason_lock);
lock(nl_table_lock);
<Interrupt>
lock(&local->queue_stop_reason_lock);
*** DEADLOCK *** |
| In the Linux kernel, the following vulnerability has been resolved:
blk-iocost: use spin_lock_irqsave in adjust_inuse_and_calc_cost
adjust_inuse_and_calc_cost() use spin_lock_irq() and IRQ will be enabled
when unlock. DEADLOCK might happen if we have held other locks and disabled
IRQ before invoking it.
Fix it by using spin_lock_irqsave() instead, which can keep IRQ state
consistent with before when unlock.
================================
WARNING: inconsistent lock state
5.10.0-02758-g8e5f91fd772f #26 Not tainted
--------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
kworker/2:3/388 [HC0[0]:SC0[0]:HE0:SE1] takes:
ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: spin_lock_irq
ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: bfq_bio_merge+0x141/0x390
{IN-HARDIRQ-W} state was registered at:
__lock_acquire+0x3d7/0x1070
lock_acquire+0x197/0x4a0
__raw_spin_lock_irqsave
_raw_spin_lock_irqsave+0x3b/0x60
bfq_idle_slice_timer_body
bfq_idle_slice_timer+0x53/0x1d0
__run_hrtimer+0x477/0xa70
__hrtimer_run_queues+0x1c6/0x2d0
hrtimer_interrupt+0x302/0x9e0
local_apic_timer_interrupt
__sysvec_apic_timer_interrupt+0xfd/0x420
run_sysvec_on_irqstack_cond
sysvec_apic_timer_interrupt+0x46/0xa0
asm_sysvec_apic_timer_interrupt+0x12/0x20
irq event stamp: 837522
hardirqs last enabled at (837521): [<ffffffff84b9419d>] __raw_spin_unlock_irqrestore
hardirqs last enabled at (837521): [<ffffffff84b9419d>] _raw_spin_unlock_irqrestore+0x3d/0x40
hardirqs last disabled at (837522): [<ffffffff84b93fa3>] __raw_spin_lock_irq
hardirqs last disabled at (837522): [<ffffffff84b93fa3>] _raw_spin_lock_irq+0x43/0x50
softirqs last enabled at (835852): [<ffffffff84e00558>] __do_softirq+0x558/0x8ec
softirqs last disabled at (835845): [<ffffffff84c010ff>] asm_call_irq_on_stack+0xf/0x20
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&bfqd->lock);
<Interrupt>
lock(&bfqd->lock);
*** DEADLOCK ***
3 locks held by kworker/2:3/388:
#0: ffff888107af0f38 ((wq_completion)kthrotld){+.+.}-{0:0}, at: process_one_work+0x742/0x13f0
#1: ffff8881176bfdd8 ((work_completion)(&td->dispatch_work)){+.+.}-{0:0}, at: process_one_work+0x777/0x13f0
#2: ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: spin_lock_irq
#2: ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: bfq_bio_merge+0x141/0x390
stack backtrace:
CPU: 2 PID: 388 Comm: kworker/2:3 Not tainted 5.10.0-02758-g8e5f91fd772f #26
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
Workqueue: kthrotld blk_throtl_dispatch_work_fn
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x107/0x167
print_usage_bug
valid_state
mark_lock_irq.cold+0x32/0x3a
mark_lock+0x693/0xbc0
mark_held_locks+0x9e/0xe0
__trace_hardirqs_on_caller
lockdep_hardirqs_on_prepare.part.0+0x151/0x360
trace_hardirqs_on+0x5b/0x180
__raw_spin_unlock_irq
_raw_spin_unlock_irq+0x24/0x40
spin_unlock_irq
adjust_inuse_and_calc_cost+0x4fb/0x970
ioc_rqos_merge+0x277/0x740
__rq_qos_merge+0x62/0xb0
rq_qos_merge
bio_attempt_back_merge+0x12c/0x4a0
blk_mq_sched_try_merge+0x1b6/0x4d0
bfq_bio_merge+0x24a/0x390
__blk_mq_sched_bio_merge+0xa6/0x460
blk_mq_sched_bio_merge
blk_mq_submit_bio+0x2e7/0x1ee0
__submit_bio_noacct_mq+0x175/0x3b0
submit_bio_noacct+0x1fb/0x270
blk_throtl_dispatch_work_fn+0x1ef/0x2b0
process_one_work+0x83e/0x13f0
process_scheduled_works
worker_thread+0x7e3/0xd80
kthread+0x353/0x470
ret_from_fork+0x1f/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: qmi_encdec: Restrict string length in decode
The QMI TLV value for strings in a lot of qmi element info structures
account for null terminated strings with MAX_LEN + 1. If a string is
actually MAX_LEN + 1 length, this will cause an out of bounds access
when the NULL character is appended in decoding. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: fq_pie: avoid stalls in fq_pie_timer()
When setting a high number of flows (limit being 65536),
fq_pie_timer() is currently using too much time as syzbot reported.
Add logic to yield the cpu every 2048 flows (less than 150 usec
on debug kernels).
It should also help by not blocking qdisc fast paths for too long.
Worst case (65536 flows) would need 31 jiffies for a complete scan.
Relevant extract from syzbot report:
rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 0-.... } 2663 jiffies s: 873 root: 0x1/.
rcu: blocking rcu_node structures (internal RCU debug):
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
CPU: 0 PID: 5177 Comm: syz-executor273 Not tainted 6.5.0-syzkaller-00453-g727dbda16b83 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
RIP: 0010:check_kcov_mode kernel/kcov.c:173 [inline]
RIP: 0010:write_comp_data+0x21/0x90 kernel/kcov.c:236
Code: 2e 0f 1f 84 00 00 00 00 00 65 8b 05 01 b2 7d 7e 49 89 f1 89 c6 49 89 d2 81 e6 00 01 00 00 49 89 f8 65 48 8b 14 25 80 b9 03 00 <a9> 00 01 ff 00 74 0e 85 f6 74 59 8b 82 04 16 00 00 85 c0 74 4f 8b
RSP: 0018:ffffc90000007bb8 EFLAGS: 00000206
RAX: 0000000000000101 RBX: ffffc9000dc0d140 RCX: ffffffff885893b0
RDX: ffff88807c075940 RSI: 0000000000000100 RDI: 0000000000000001
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffc9000dc0d178
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 0000555555d54380(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6b442f6130 CR3: 000000006fe1c000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<NMI>
</NMI>
<IRQ>
pie_calculate_probability+0x480/0x850 net/sched/sch_pie.c:415
fq_pie_timer+0x1da/0x4f0 net/sched/sch_fq_pie.c:387
call_timer_fn+0x1a0/0x580 kernel/time/timer.c:1700 |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: csum: Fix OoB access in IP checksum code for negative lengths
Although commit c2c24edb1d9c ("arm64: csum: Fix pathological zero-length
calls") added an early return for zero-length input, syzkaller has
popped up with an example of a _negative_ length which causes an
undefined shift and an out-of-bounds read:
| BUG: KASAN: slab-out-of-bounds in do_csum+0x44/0x254 arch/arm64/lib/csum.c:39
| Read of size 4294966928 at addr ffff0000d7ac0170 by task syz-executor412/5975
|
| CPU: 0 PID: 5975 Comm: syz-executor412 Not tainted 6.4.0-rc4-syzkaller-g908f31f2a05b #0
| Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023
| Call trace:
| dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:233
| show_stack+0x2c/0x44 arch/arm64/kernel/stacktrace.c:240
| __dump_stack lib/dump_stack.c:88 [inline]
| dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106
| print_address_description mm/kasan/report.c:351 [inline]
| print_report+0x174/0x514 mm/kasan/report.c:462
| kasan_report+0xd4/0x130 mm/kasan/report.c:572
| kasan_check_range+0x264/0x2a4 mm/kasan/generic.c:187
| __kasan_check_read+0x20/0x30 mm/kasan/shadow.c:31
| do_csum+0x44/0x254 arch/arm64/lib/csum.c:39
| csum_partial+0x30/0x58 lib/checksum.c:128
| gso_make_checksum include/linux/skbuff.h:4928 [inline]
| __udp_gso_segment+0xaf4/0x1bc4 net/ipv4/udp_offload.c:332
| udp6_ufo_fragment+0x540/0xca0 net/ipv6/udp_offload.c:47
| ipv6_gso_segment+0x5cc/0x1760 net/ipv6/ip6_offload.c:119
| skb_mac_gso_segment+0x2b4/0x5b0 net/core/gro.c:141
| __skb_gso_segment+0x250/0x3d0 net/core/dev.c:3401
| skb_gso_segment include/linux/netdevice.h:4859 [inline]
| validate_xmit_skb+0x364/0xdbc net/core/dev.c:3659
| validate_xmit_skb_list+0x94/0x130 net/core/dev.c:3709
| sch_direct_xmit+0xe8/0x548 net/sched/sch_generic.c:327
| __dev_xmit_skb net/core/dev.c:3805 [inline]
| __dev_queue_xmit+0x147c/0x3318 net/core/dev.c:4210
| dev_queue_xmit include/linux/netdevice.h:3085 [inline]
| packet_xmit+0x6c/0x318 net/packet/af_packet.c:276
| packet_snd net/packet/af_packet.c:3081 [inline]
| packet_sendmsg+0x376c/0x4c98 net/packet/af_packet.c:3113
| sock_sendmsg_nosec net/socket.c:724 [inline]
| sock_sendmsg net/socket.c:747 [inline]
| __sys_sendto+0x3b4/0x538 net/socket.c:2144
Extend the early return to reject negative lengths as well, aligning our
implementation with the generic code in lib/checksum.c |
| In the Linux kernel, the following vulnerability has been resolved:
clocksource/drivers/cadence-ttc: Fix memory leak in ttc_timer_probe
Smatch reports:
drivers/clocksource/timer-cadence-ttc.c:529 ttc_timer_probe()
warn: 'timer_baseaddr' from of_iomap() not released on lines: 498,508,516.
timer_baseaddr may have the problem of not being released after use,
I replaced it with the devm_of_iomap() function and added the clk_put()
function to cleanup the "clk_ce" and "clk_cs". |
| In the Linux kernel, the following vulnerability has been resolved:
mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read()
`req` is allocated in pcf50633_adc_async_read(), but
adc_enqueue_request() could fail to insert the `req` into queue.
We need to check the return value and free it in the case of failure. |
