| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Deserialization of Untrusted Data vulnerability in crossi72 Phoenix Media Rename phoenix-media-rename allows Object Injection.This issue affects Phoenix Media Rename: from n/a through 3.13.5. |
| Deserialization of Untrusted Data vulnerability in weDevs Dokan dokan-lite allows Object Injection.This issue affects Dokan: from n/a through 5.3.1. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: bsg: Pass reply_len to bsg_setup_queue() to fit UFS ARPMB replies
bsg-lib allocates a 96-byte (SCSI_SENSE_BUFFERSIZE) reply buffer per
job, but struct ufs_rpmb_reply is 104 bytes: a 40-byte struct
ufs_bsg_reply followed by a 64-byte EHS. When an Advanced RPMB command
returns an EHS, ufshcd_advanced_rpmb_req_handler() copies it right after
the 40-byte header and writes 8 bytes past the end of the buffer.
Let each BSG transport pass its reply buffer size to bsg_setup_queue()
and have ufs_bsg request sizeof(struct ufs_rpmb_reply), so the full
reply reaches user space. Other transports keep SCSI_SENSE_BUFFERSIZE. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix the sub-buffer array base in rb_meta_subbuf_idx()
On a persistent ring buffer, rb_meta_subbuf_idx() can return an index one
sub-buffer too high. rb_setup_ids_meta_page() then fills subbuf_ids[]
shifted by one and leaves subbuf_ids[0] NULL, which __rb_map_vma()
dereferences when userspace maps trace_pipe_raw. rb_update_meta_reader()
writes two such indices into meta->buffers[], which rb_cpu_meta_valid()
would reject on the next boot, discarding the previous boot's trace.
A CPU's sub-buffer array starts after its meta header and the nr_subbufs
integers that follow, aligned up to a sub-buffer. rb_meta_subbuf_idx()
inverts that calculation but skips only the integers, not the header, so
its base is one sub-buffer low whenever the omitted header size crosses
the alignment boundary.
Invert the calculation with rb_subbufs_from_meta() rather than repeating
it. rb_range_buffer() maps an index back to an address through the same
helper, so the two directions can no longer disagree. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Do not show buffer_meta for CPUs without a buffer
The per_cpu/cpuN/buffer_meta files are created for every possible CPU,
but buffer->buffers[cpu] is only allocated once that CPU comes online.
Reading the file of a CPU that never came online dereferences a NULL
cpu_buffer in rbm_start().
Fail the open with -ENODEV when the CPU has no buffer, as the other
per CPU ring buffer interfaces do. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/histograms: Reject non-stacktrace fields for synthetic stacktrace fields
In check_synth_field(), when a synthetic event field is a stacktrace
(field->is_stack) and the histogram field is not a "long[" stacktrace
array, validation falls through to the generic size and signedness
comparison.
Because parse_synth_field() sets a stacktrace field's type to
"__data_loc unsigned long[]", its size is sizeof(u64) and
synth_field_signed() marks it as signed. Consequently, any 8-byte
signed scalar histogram field passes the fallback check, and its scalar
value is subsequently dereferenced as a kernel stacktrace pointer in
get_field_size() and trace_stack().
Furthermore, checking strstr(hist_field->type, "long[") is insufficient
because tracepoint fields defined with __bitmask() or __rel_bitmask()
also have type "__data_loc unsigned long[]" or "__rel_loc unsigned
long[]", whilst create_hist_field() treats them as 4-byte scalar values
without HIST_FIELD_FL_STACKTRACE.
Propagate HIST_FIELD_FL_STACKTRACE to variable references and field
variables (whilst excluding variable aliases from per-element
stacktrace capture), and reject any mismatch between
HIST_FIELD_FL_STACKTRACE and field->is_stack in check_synth_field(). |
| In the Linux kernel, the following vulnerability has been resolved:
spi: imx: fix slab corruption from undersized DMA bounce buffers
Since commit faa8e404ad8e ("spi: imx: support dynamic burst length for
ECSPI DMA mode"), the driver allocates its private DMA TX/RX buffers
with kzalloc(dma_len), where dma_len is only rounded up to 4 bytes, but
maps, syncs and unmaps them with DMA_CACHE_ALIGNED_LEN(dma_len), i.e.
rounded up to the cache line size. As a result, the DMA API operates on
memory beyond the end of the allocation.
This was observed on a custom i.MX8MP platform with an mcp251xfd CAN
controller under heavy RPMSG load, as a series of refcount_t warnings
triggered from rpmsg_recv_done() in virtio_rpmsg_bus:
refcount_t: addition on 0; use-after-free.
refcount_t: underflow; use-after-free.
refcount_t: saturated; leaking memory.
Leading finally to an "Unable to handle kernel paging request" oops.
Reproducing this problem took between 30 minutes and roughly 30 hours
under the same workload.
Hardware watchpoints on the refcount of a struct rpmsg_endpoint showed
it was overwritten from 2 to 1 by __pi_memcpy_generic() in the
irq/155-spi2.0 thread. Additionally it was found that a "normal"
rpmsg_recv_done() took 11µs +/-2µs from its kref_get to kref_put. In
the error case the same sequence took about 215µs +/-10µs. Based on
this, an LLM was used to identify the size mismatch fixed here.
Allocate the buffers with DMA_CACHE_ALIGNED_LEN(dma_len) so they cover
the full mapped length, and use the same length for
dma_sync_single_for_cpu() to stay consistent with map and unmap.
With this patch applied, the same workload ran for more than 200 hours
without the problem reproducing. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: revalidate output stream after association connect wait
When message interleaving is enabled, the first send waits for association
establishment before building its data chunks. The wait drops the socket
lock, and handshake processing can reduce the output stream count to the
peer-advertised inbound stream count. sctp_stream_init() then frees the
extension of every removed stream.
The sender resumes with the stream that it checked before the wait. If the
peer removed that stream, sctp_outq_tail() later dereferences its NULL
extension. Fatal-oops policies then panic the host.
KASAN: null-ptr-deref in range [0x38-0x3f]
RIP: sctp_outq_tail+0x49e/0xaa0
Call Trace:
sctp_primitive_SEND
sctp_sendmsg_to_asoc
sctp_sendmsg
A range check alone is insufficient. Stream reconfiguration can grow the
output count again while the lock is released without recreating extensions
freed by the earlier shrink. The stream can then be in range while its
extension remains NULL. The send-buffer wait has the same issue.
Factor the range and extension checks into a helper and repeat both after
each send-path wait that drops the socket lock. Once the lock is
reacquired, the validation remains stable through data creation and
queueing.
If validation fails after the connect wait, the auto-created association is
already established. Return ESRCH so the existing caller path keeps it
under state-machine ownership instead of freeing it directly, which would
leave protocol, counter and socket state inconsistent. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: fix use-after-free in __tcf_action_put()
__tcf_action_put() decrements the reference count before decrementing the
binding count. Another thread can free the action between these operations,
causing the binding-count update to access freed memory. KASAN reports it
as:
BUG: KASAN: slab-use-after-free in __tcf_action_put+0x327/0x340
Write of size 4 at addr ff11000000d46420 by task tc-put-pause/64
Hold the action IDR mutex across both counter updates and IDR removal,
keeping cleanup outside the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
mshv_vtl: Check per-CPU register page before mmap
Register-page setup is optional for each CPU. If allocation or
registration fails, mshv_vtl_configure_reg_page() warns and leaves that
CPU's reg_page NULL, but initial context setup continues successfully.
Meanwhile, successful setup on another CPU sets the global
mshv_has_reg_page flag.
mshv_vtl_fault() checks this global flag before selecting the requested
CPU's register page. With mixed setup results across online CPUs, the
check passes even for a CPU with no register page, reaching
get_page(NULL) when userspace faults in that mapping.
Check the selected per-CPU register page before taking its reference and
return VM_FAULT_SIGBUS if it is absent. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: a mount that copy_tree() leaves out can't take over a lock
Since commit c62a4766937e ("move_mount: transfer MNT_LOCKED") a mount
can be moved beneath a locked mount. The lock moves from the old cover
to the new mount which takes over the job of hiding what's under it and
the old cover can be unmounted. That works as long as the new mount
stays. But the caller picks the new mount and copy_tree() leaves a
mount of a mount namespace file out of every copy made without
CL_COPY_MNT_NS_FILE, together with everything mounted on it, and never
looks at MNT_LOCKED. unshare(CLONE_NEWNS) and mount propagation make
such copies.
So a task that is root in its own user namespace gets rid of a locked
cover on a file without a race and without touching the filesystem
below it. It makes a child with a mount namespace of its own, binds the
child's /proc/<pid>/ns/mnt beneath the cover with MOVE_MOUNT_BENEATH,
which hands the lock to that bind, and calls unshare(CLONE_NEWNS). The
new mount namespace has nothing on the file. That's the usual way to
mask a single file, a bind of /dev/null or of an empty file. With a
bind of an ordinary file the file stays covered.
copy_tree() already refuses to leave out a locked unbindable mount with
-EPERM since commit df7342b24018 ("mount: Don't allow copying
MNT_UNBINDABLE|MNT_LOCKED mounts"). Do the same for a locked mount of a
mount namespace file. That also covers a tree copied with
CL_COPY_MNT_NS_FILE and attached into a mount namespace of another user
namespace where lock_mnt_tree() locks it. Note that unshare(CLONE_NEWNS)
and clone(CLONE_NEWNS) fail with EPERM from such a mount namespace from
then on. The mount can't be left out and it can't be unmounted.
And refuse to move a mount of a mount namespace file beneath a locked
mount in the first place. Otherwise the task ends up with a mount it
can't unmount and an unshare() that fails for good.
Chris also found a second mount that goes away by itself, a clone of an
automounted mount that shrink_submounts() took along with its parent.
Commit f78ddcc87224 ("namespace: never expire a locked mount") took
care of that one.
Chris's reproducer is appended. Mode nsfile reads SECRET after the
unshare() on 7.3-rc7, with this patch the move_mount() fails with
EINVAL and the file stays covered. nsfile-control uses an ordinary file
and reads MASK both ways.
// SPDX-License-Identifier: GPL-2.0
/*
* Get rid of a locked cover with MOVE_MOUNT_BENEATH.
*
* The "admin" (root) makes a tmpfs W:
* W/D file, holds SECRET, covered by a bind of a file with MASK
* W/Dd/inner file, holds SECRET, Dd is covered by a bind of a directory
* whose "inner" holds MASK
* W/own directory of uid 1000 with the file "mine" and the
* directory "minedir", whose "inner" holds MINE
* W/dbg debugfs, mode 755. dbg/tracing is an automount point
* The "attacker" is uid 1000. It enters a new user namespace with a new mount
* namespace, so W and both covers are locked there.
*
* usage: prog MODE
* plain put a bind of own/mine beneath the cover of D, unmount the cover
* nsfile put a bind of the mount namespace file of a child beneath the
* cover of D, then unshare(CLONE_NEWNS)
* nsfile-control the same with a bind of own/mine
* shrink put a bind of the automounted tracefs beneath the cover of Dd,
* unmount the cover, put a tmpfs beneath W, call umount(W), which fails
* shrink-control the same with a bind of own/minedir
* The environment variable AUTOMOUNT_DIR names another automount point for "shrink".
*/
#define _GNU_SOURCE
#include <errno.h>
#include <fcntl.h>
#include <grp.h>
#include <sched.h>
#include <signal.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: free the sbi after a grace period
If the "nocase" mount option ntfs3 uses custom hash and dentry compare
functions. Both access ntfs3 superblock private information in rcu
pathwalk. ntfs_put_super() and ntfs3_kill_sb() drop the info without any
rcu delay. A lookup that's still inside the filesystem when the last
reference to the mount is dropped causes a UAF. With a pathwalk held up
in ntfs_d_hash() while the last reference to the mount goes away:
BUG: KASAN: slab-use-after-free in ntfs_nls_to_utf16+0x752/0x940
Read of size 8 at addr ff1100010453c850 by task walker/99
Call Trace:
<TASK>
ntfs_nls_to_utf16+0x752/0x940
ntfs_d_hash+0x22b/0x500
link_path_walk+0x11ad/0x1d30
path_lookupat+0x63/0xb00
filename_lookup+0x1f1/0x5b0
vfs_statx+0xd7/0x3b0
[...]
Allocated by task 95:
__kmalloc_cache_noprof+0x249/0x560
ntfs_init_fs_context+0x2db/0x5a0
alloc_fs_context+0x52e/0xc70
[...]
Freed by task 98:
kfree+0x1db/0x5b0
deactivate_locked_super+0x9c/0xf0
cleanup_mnt+0x9f/0x130
task_work_run+0x131/0x250
The bug is currently masked by the grace period in namespace_unlock()
for umount(2). Keep the necessary information until the filesystem
private info is freed and free it with an rcu delay.
ntfs3_free_sbi() now runs from an rcu callback and drops the upcase
table via ntfs_put_shared(). So switch s_shared_lock over to
spin_lock_bh(). Otherwise the callback can deadlock against a task
holding the lock on the same cpu. |
| Heap-based buffer overflow in Windows Virtualization-Based Security (VBS) Enclave allows an authorized attacker to elevate privileges locally. |
| Release of invalid pointer or reference in Windows Modern Device Management (MDM) allows an authorized attacker to elevate privileges locally. |
| Dell PowerProtect Data Domain, Feature Release versions 7.7.1.0 through 8.8, LTS2024 release versions 7.13.1.0 through 7.13.1.80, LTS2025 release versions 8.3.1.0 through 8.3.1.40, LTS2026 release versions 8.6.1.0 through 8.6.1.20, contain a Stack-based Buffer Overflow vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to command execution. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: free the sbi after a grace period
ext4_get_link() follows a symlink that keeps its target in a data block
in rcu pathwalk mode with ext4_getblk(EXT4_GET_BLOCKS_CACHED_NOWAIT).
That reads s_mount_state in the ASSERT() of ext4_getblk() and again in
ext4_es_lookup_extent(), and the lookup bumps the extent status hit or
miss counter, all through sb->s_fs_info.
ext4_put_super() destroys those counters, clears sb->s_fs_info and frees
the sbi without waiting for a grace period. A pathwalk that is still in
ext4_get_link() when the last reference to the mount goes away then
dereferences a NULL s_fs_info, the freed sbi or the destroyed percpu
counters.
With a pathwalk held up in ext4_get_link() while the last reference
goes away:
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
RIP: 0010:ext4_getblk+0xf0/0x640
Call Trace:
<TASK>
ext4_get_link+0x26c/0x410
pick_link+0xf96/0x1780
step_into_slowpath+0x9b8/0x1250
path_lookupat+0x484/0xb00
filename_lookup+0x1f1/0x5b0
vfs_statx+0xd7/0x3b0
vfs_fstatat+0x4d/0x90
__do_sys_newfstatat+0xa0/0x100
do_syscall_64+0x10e/0x5e0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
So far that has been hard to hit. umount(2) waits for a grace period in
namespace_unlock() before it drops the mount, so only a mount whose last
reference goes away elsewhere, like the close of a file or a chdir out of
a lazily unmounted directory, can race a walker.
Keep sb->s_fs_info and free the sbi together with the extent status
counters after a grace period. Split the counters out of
ext4_es_unregister_shrinker() for that. The shrinker still gets wasted
in ext4_put_super(), the counters go with the sbi. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Reset MMU back to the root MMU if loading L2 state fails for !VM-Entry
Reset the vCPU's MMU pointer back to the root MMU if loading L2 state fails
in the "not from VM-Entry" case, i.e. when emulating RSM or handling
KVM_SET_NESTED_STATE. Failure to unwind the MMU pointer results in KVM
trying to run L1 with a nested MMU, and is especially problematic if the
vCPU manages to free its nested state before the VM crashes. Constructing
the root for a nested EPT MMU goes through vmcs12, which is dynamically
allocated/freed when nVMX is enabled/disabled. And so if the nested state
is freed with the MMU still pointing at the nested MMU, KVM will hit a NULL
pointer deref when attempting to get L1=>L2 EPTP.
BUG: kernel NULL pointer dereference, address: 0000000000000078
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 114a2d067 P4D 111743067 PUD 11141f067 PMD 0
Oops: Oops: 0000 [#1] SMP
CPU: 20 UID: 1000 PID: 1272 Comm: nested_tdp_faul Not tainted 7.3.0-rc4-8c89f11d1a99b-sink-vm #1914 PREEMPTLAZY
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:nested_ept_get_eptp+0xb/0x10 [kvm_intel]
Call Trace:
<TASK>
kvm_mmu_load+0xcd/0x870 [kvm]
kvm_arch_vcpu_ioctl_run+0x18f5/0x1f80 [kvm]
kvm_vcpu_ioctl+0x2c7/0x970 [kvm]
__x64_sys_ioctl+0x90/0xd0
do_syscall_64+0x9c/0x4d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x47491b
</TASK>
Modules linked in: kvm_intel kvm irqbypass
CR2: 0000000000000078
---[ end trace 0000000000000000 ]---
RIP: 0010:nested_ept_get_eptp+0xb/0x10 [kvm_intel]
[sean: write changelog] |
| Use after free in Windows Autopilot allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in Windows Hyper-V allows an authorized attacker to elevate privileges locally. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in WP Grids EasyTest – Simplify A/B Testing convertpro allows DOM-Based XSS.This issue affects EasyTest – Simplify A/B Testing: from n/a through 1.0.1. |