Search Results (18299 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2025-64517 1 Sudo-rs 1 Sudo-rs 2026-04-15 4.4 Medium
sudo-rs is a memory safe implementation of sudo and su written in Rust. With `Defaults targetpw` (or `Defaults rootpw`) enabled, the password of the target account (or root account) instead of the invoking user is used for authentication. sudo-rs starting in version 0.2.5 and prior to version 0.2.10 incorrectly recorded the invoking user’s UID instead of the authenticated-as user's UID in the authentication timestamp. Any later `sudo` invocation on the same terminal while the timestamp was still valid would use that timestamp, potentially bypassing new authentication even if the policy would have required it. A highly-privileged user (able to run commands as other users, or as root, through sudo) who knows one password of an account they are allowed to run commands as, would be able to run commands as any other account the policy permits them to run commands for, even if they don't know the password for those accounts. A common instance of this would be that a user can still use their own password to run commands as root (the default behaviour of `sudo`), effectively negating the intended behaviour of the `targetpw` or `rootpw` options. Version 0.2.10 contains a patch for the issue. Versions prior to 0.2.5 are not affected, since they do not offer `Defaults targetpw` or `Defaults rootpw`.
CVE-2025-14089 1 Himool 1 Erp 2026-04-15 6.3 Medium
A vulnerability was identified in Himool ERP up to 2.2. Affected by this issue is the function update_account of the file /api/admin/update_account/ of the component AdminActionViewSet. Such manipulation leads to improper authorization. The attack may be performed from remote. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.
CVE-2025-14088 1 Ketr 1 Jepaas 2026-04-15 6.3 Medium
A vulnerability was determined in ketr JEPaaS up to 7.2.8. Affected by this vulnerability is an unknown functionality of the file /je/load. This manipulation of the argument Authorization causes improper authorization. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized.
CVE-2025-5870 2026-04-15 7.3 High
A vulnerability has been found in TRENDnet TV-IP121W 1.1.1 Build 36 and classified as critical. Affected by this vulnerability is an unknown functionality of the file /admin/setup.cgi of the component Web Interface. The manipulation leads to improper authentication. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
CVE-2025-20341 1 Cisco 2 Catalyst Center, Digital Network Architecture Center 2026-04-15 8.8 High
A vulnerability in Cisco Catalyst Center Virtual Appliance could allow an authenticated, remote attacker to elevate privileges to Administrator on an affected system. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by submitting a crafted HTTP request to an affected system. A successful exploit could allow the attacker to perform unauthorized modifications to the system, including creating new user accounts or elevating their own privileges on an affected system. To exploit this vulnerability, the attacker must have valid credentials for a user account with at least the role of Observer.
CVE-2025-43712 1 Jhipster 1 Generator-jhipster 2026-04-15 2.9 Low
JHipster before v.8.9.0 allows privilege escalation via a modified authorities parameter. Upon registering in the JHipster portal and logging in as a standard user, the authorities parameter in the response from the api/account endpoint contains the value ROLE_USER. By manipulating the authorities parameter and changing its value to ROLE_ADMIN, the privilege is successfully escalated to an Admin level. This allowed the access to all admin-related functionalities in the application. NOTE: this is disputed by the Supplier because there is no privilege escalation in the context of the JHipster backend (the report only demonstrates that, after using JHipster to generate an application, one can make a non-functional admin screen visible in the front end of that application).
CVE-2024-46622 2026-04-15 9.8 Critical
An Escalation of Privilege security vulnerability was found in SecureAge Security Suite software 7.0.x before 7.0.38, 7.1.x before 7.1.11, 8.0.x before 8.0.18, and 8.1.x before 8.1.18 that allows arbitrary file creation, modification and deletion.
CVE-2025-2114 2026-04-15 3.7 Low
A vulnerability, which was classified as problematic, has been found in Shenzhen Sixun Software Sixun Shanghui Group Business Management System 7. This issue affects some unknown processing of the file /WebPages/Adm/OperatorStop.asp of the component Reset Password Interface. The manipulation of the argument OperId leads to improper authorization. The attack may be initiated remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
CVE-2025-22146 1 Getsentry 1 Sentry 2026-04-15 9.1 Critical
Sentry is a developer-first error tracking and performance monitoring tool. A critical vulnerability was discovered in the SAML SSO implementation of Sentry. It was reported to us via our private bug bounty program. The vulnerability allows an attacker to take over any user account by using a malicious SAML Identity Provider and another organization on the same Sentry instance. The victim email address must be known in order to exploit this vulnerability. The Sentry SaaS fix was deployed on Jan 14, 2025. For self hosted users; if only a single organization is allowed `(SENTRY_SINGLE_ORGANIZATION = True)`, then no action is needed. Otherwise, users should upgrade to version 25.1.0 or higher. There are no known workarounds for this vulnerability.
CVE-2025-24895 2026-04-15 9.1 Critical
CIE.AspNetCore.Authentication is an AspNetCore Remote Authenticator for CIE 3.0. Authentication using Spid and CIE is based on the SAML2 standard which provides two entities: 1. Identity Provider (IDP): the system that authenticates users and provides identity information (SAML affirmation) to the Service Provider, in essence, is responsible for the management of the credentials and identity of users; 2. Service Provider (SP): the system that provides a service to the user and relies on the Identity Provider to authenticate the user, receives SAML assertions from the IdP to grant access to resources. The library cie-aspnetcore refers to the second entity, the SP, and implements the validation logic of SAML assertions within SAML responses. In affected versions there is no guarantee that the first signature refers to the root object, it follows that if an attacker injects an item signed as the first element, all other signatures will not be verified. The only requirement is to have an XML element legitimately signed by the IdP, a condition that is easily met using the IdP's public metadata. An attacker could create an arbitrary SAML response that would be accepted by SPs using vulnerable SDKs, allowing him to impersonate any Spid and/or CIE user. This issue has been addressed in version 2.1.0 and all users are advised to upgrade. There are no known workarounds for this vulnerability.
CVE-2024-55954 1 Openobserve 1 Openobserve 2026-04-15 8.7 High
OpenObserve is a cloud-native observability platform. A vulnerability in the user management endpoint `/api/{org_id}/users/{email_id}` allows an "Admin" role user to remove a "Root" user from the organization. This violates the intended privilege hierarchy, enabling a non-root user to remove the highest-privileged account. Due to insufficient role checks, the `remove_user_from_org` function does not prevent an "Admin" user from removing a "Root" user. As a result, an attacker with an "Admin" role can remove critical "Root" users, potentially gaining effective full control by eliminating the highest-privileged accounts. The `DELETE /api/{org_id}/users/{email_id}` endpoint is affected. This issue has been addressed in release version `0.14.1` and all users are advised to upgrade. There are no known workarounds for this vulnerability.
CVE-2025-24516 1 Intel 1 Cip Software 2026-04-15 4.5 Medium
Improper access control for some Intel(R) CIP software before version WIN_DCA_2.4.0.11001 within Ring 3: User Applications may allow an information disclosure. Unprivileged software adversary with a privileged user combined with a low complexity attack may enable data exposure. This result may potentially occur via adjacent access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (none) and availability (none) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts.
CVE-2024-51988 2026-04-15 6.5 Medium
RabbitMQ is a feature rich, multi-protocol messaging and streaming broker. In affected versions queue deletion via the HTTP API was not verifying the `configure` permission of the user. Users who had all of the following: 1. Valid credentials, 2. Some permissions for the target virtual host & 3. HTTP API access. could delete queues it had no (deletion) permissions for. This issue has been addressed in version 3.12.11 of the open source rabbitMQ release and in versions 1.5.2, 3.13.0, and 4.0.0 of the tanzu release. Users are advised to upgrade. Users unable to upgrade may disable management plugin and use, for example, Prometheus and Grafana for monitoring.
CVE-2025-40761 1 Siemens 11 Ruggedcom Rox Mx5000, Ruggedcom Rox Mx5000re, Ruggedcom Rox Rx1400 and 8 more 2026-04-15 7.6 High
A vulnerability has been identified in RUGGEDCOM ROX MX5000 (All versions), RUGGEDCOM ROX MX5000RE (All versions), RUGGEDCOM ROX RX1400 (All versions), RUGGEDCOM ROX RX1500 (All versions), RUGGEDCOM ROX RX1501 (All versions), RUGGEDCOM ROX RX1510 (All versions), RUGGEDCOM ROX RX1511 (All versions), RUGGEDCOM ROX RX1512 (All versions), RUGGEDCOM ROX RX1524 (All versions), RUGGEDCOM ROX RX1536 (All versions), RUGGEDCOM ROX RX5000 (All versions). Affected devices do not properly limit access through its Built-In-Self-Test (BIST) mode. This could allow an attacker with physical access to the serial interface to bypass authentication and get access to a root shell on the device.
CVE-2025-28233 2026-04-15 9.1 Critical
Incorrect access control in BW Broadcast TX600 (14980), TX300 (32990) (31448), TX150, TX1000, TX30, and TX50 Hardware Version: 2, Software Version: 1.6.0, Control Version: 1.0, AIO Firmware Version: 1.7 allows attackers to access log files and extract session identifiers to execute a session hijacking attack.
CVE-2025-20099 1 Intel 1 Rapid Storage Technology 2026-04-15 6.7 Medium
Improper access control for some Intel(R) Rapid Storage Technology installation software may allow an authenticated user to potentially enable escalation of privilege via local access.
CVE-2025-7742 2026-04-15 N/A
An authentication vulnerability exists in the LG Innotek camera model LNV5110R firmware that allows a malicious actor to upload an HTTP POST request to the devices non-volatile storage. This action may result in remote code execution that allows an attacker to run arbitrary commands on the target device at the administrator privilege level.
CVE-2024-46941 2026-04-15 N/A
SystemUI has an incorrect component protection setting, which allows access to specific information.
CVE-2025-27403 2026-04-15 N/A
Ratify is a verification engine as a binary executable and on Kubernetes which enables verification of artifact security metadata and admits for deployment only those that comply with policies the user creates. In a Kubernetes environment, Ratify can be configured to authenticate to a private Azure Container Registry (ACR). The Azure workload identity and Azure managed identity authentication providers are configured in this setup. Users that configure a private ACR to be used with the Azure authentication providers may be impacted by a vulnerability that exists in versions prior to 1.2.3 and 1.3.2. Both Azure authentication providers attempt to exchange an Entra ID (EID) token for an ACR refresh token. However, Ratify’s Azure authentication providers did not verify that the target registry is an ACR. This could have led to the EID token being presented to a non-ACR registry during token exchange. EID tokens with ACR access can potentially be extracted and abused if a user workload contains an image reference to a malicious registry. As of versions 1.2.3 and 1.3.2, the Azure workload identity and Azure managed identity authentication providers are updated to add new validation prior to EID token exchange. Validation relies upon registry domain validation against a pre-configured list of well-known ACR endpoints. EID token exchange will be executed only if at least one of the configured well-known domain suffixes (wildcard support included) matches the registry domain of the image reference.
CVE-2025-3169 2026-04-15 5 Medium
A vulnerability was found in Projeqtor up to 12.0.2. It has been rated as critical. Affected by this issue is some unknown functionality of the file /tool/saveAttachment.php. The manipulation of the argument attachmentFiles leads to unrestricted upload. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. Upgrading to version 12.0.3 is able to address this issue. It is recommended to upgrade the affected component. The vendor explains, that "this vulnerability can be exploited only on not securely installed instances, as it is adviced during product install: attachment directory should be out of web reach, so that even if executable file can be uploaded, it cannot be executed through the web."