Export limit exceeded: 360766 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (360766 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-43873 | 1 Johnsoncontrols | 6 Edge G2, Istar Edge G2, Istar Ultra and 3 more | 2026-04-15 | N/A |
| Successful exploitation of these vulnerabilities could allow an attacker to modify firmware and gain full access to the device. | ||||
| CVE-2025-14188 | 1 Ugreen | 1 Dh2100+ | 2026-04-15 | 7.2 High |
| A security vulnerability has been detected in UGREEN DH2100+ up to 5.3.0.251125. This impacts the function handler_file_backup_create of the file /v1/file/backup/create of the component nas_svr. The manipulation of the argument path leads to command injection. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. Upgrading the affected component is advised. | ||||
| CVE-2025-66005 | 1 Shadowblip | 1 Inputplumber | 2026-04-15 | N/A |
| Lack of authorization of the InputManager D-Bus interface in InputPlumber versions before v0.63.0 can lead to local Denial-of-Service, information leak or even privilege escalation in the context of the currently active user session. | ||||
| CVE-2025-34027 | 1 Versa | 1 Concerto | 2026-04-15 | N/A |
| The Versa Concerto SD-WAN orchestration platform is vulnerable to an authentication bypass in the Traefik reverse proxy configuration, allowing at attacker to access administrative endpoints. The Spack upload endpoint can be leveraged for a Time-of-Check to Time-of-Use (TOCTOU) write in combination with a race condition to achieve remote code execution via path loading manipulation, allowing an unauthenticated actor to achieve remote code execution (RCE).This issue is known to affect Concerto from 12.1.2 through 12.2.0. Additional versions may be vulnerable. | ||||
| CVE-2025-64983 | 1 Switchbot | 1 Smart Video Doorbell | 2026-04-15 | N/A |
| Smart Video Doorbell firmware versions prior to 2.01.078 contain an active debug code vulnerability that allows an attacker to connect via Telnet and gain access to the device. | ||||
| CVE-2025-30222 | 2026-04-15 | N/A | ||
| Shescape is a simple shell escape library for JavaScript. Versions 1.7.2 through 2.1.1 are vulnerable to potential environment variable exposure on Windows with CMD. This impact users of Shescape on Windows that explicitly configure `shell: 'cmd.exe'` or `shell: true` using any of `quote`/`quoteAll`/`escape`/`escapeAll`. An attacker may be able to get read-only access to environment variables. This bug has been patched in v2.1.2. For those who are already using v2 of Shescape, no further changes are required. Those who are are using v1 of Shescape should follow the migration guide to upgrade to v2. There is no plan to release a patch compatible with v1 of Shescape. As a workaround, users can remove all instances of `%` from user input before using Shescape. | ||||
| CVE-2025-40268 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: client: fix memory leak in smb3_fs_context_parse_param The user calls fsconfig twice, but when the program exits, free() only frees ctx->source for the second fsconfig, not the first. Regarding fc->source, there is no code in the fs context related to its memory reclamation. To fix this memory leak, release the source memory corresponding to ctx or fc before each parsing. syzbot reported: BUG: memory leak unreferenced object 0xffff888128afa360 (size 96): backtrace (crc 79c9c7ba): kstrdup+0x3c/0x80 mm/util.c:84 smb3_fs_context_parse_param+0x229b/0x36c0 fs/smb/client/fs_context.c:1444 BUG: memory leak unreferenced object 0xffff888112c7d900 (size 96): backtrace (crc 79c9c7ba): smb3_fs_context_fullpath+0x70/0x1b0 fs/smb/client/fs_context.c:629 smb3_fs_context_parse_param+0x2266/0x36c0 fs/smb/client/fs_context.c:1438 | ||||
| CVE-2025-40270 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm, swap: fix potential UAF issue for VMA readahead Since commit 78524b05f1a3 ("mm, swap: avoid redundant swap device pinning"), the common helper for allocating and preparing a folio in the swap cache layer no longer tries to get a swap device reference internally, because all callers of __read_swap_cache_async are already holding a swap entry reference. The repeated swap device pinning isn't needed on the same swap device. Caller of VMA readahead is also holding a reference to the target entry's swap device, but VMA readahead walks the page table, so it might encounter swap entries from other devices, and call __read_swap_cache_async on another device without holding a reference to it. So it is possible to cause a UAF when swapoff of device A raced with swapin on device B, and VMA readahead tries to read swap entries from device A. It's not easy to trigger, but in theory, it could cause real issues. Make VMA readahead try to get the device reference first if the swap device is a different one from the target entry. | ||||
| CVE-2025-66020 | 1 Open-circle | 1 Valibot | 2026-04-15 | 7.5 High |
| Valibot helps validate data using a schema. In versions from 0.31.0 to 1.1.0, the EMOJI_REGEX used in the emoji action is vulnerable to a Regular Expression Denial of Service (ReDoS) attack. A short, maliciously crafted string (e.g., <100 characters) can cause the regex engine to consume excessive CPU time (minutes), leading to a Denial of Service (DoS) for the application. This issue has been patched in version 1.2.0. | ||||
| CVE-2025-40287 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: exfat: fix improper check of dentry.stream.valid_size We found an infinite loop bug in the exFAT file system that can lead to a Denial-of-Service (DoS) condition. When a dentry in an exFAT filesystem is malformed, the following system calls — SYS_openat, SYS_ftruncate, and SYS_pwrite64 — can cause the kernel to hang. Root cause analysis shows that the size validation code in exfat_find() does not check whether dentry.stream.valid_size is negative. As a result, the system calls mentioned above can succeed and eventually trigger the DoS issue. This patch adds a check for negative dentry.stream.valid_size to prevent this vulnerability. | ||||
| CVE-2025-40272 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/secretmem: fix use-after-free race in fault handler When a page fault occurs in a secret memory file created with `memfd_secret(2)`, the kernel will allocate a new folio for it, mark the underlying page as not-present in the direct map, and add it to the file mapping. If two tasks cause a fault in the same page concurrently, both could end up allocating a folio and removing the page from the direct map, but only one would succeed in adding the folio to the file mapping. The task that failed undoes the effects of its attempt by (a) freeing the folio again and (b) putting the page back into the direct map. However, by doing these two operations in this order, the page becomes available to the allocator again before it is placed back in the direct mapping. If another task attempts to allocate the page between (a) and (b), and the kernel tries to access it via the direct map, it would result in a supervisor not-present page fault. Fix the ordering to restore the direct map before the folio is freed. | ||||
| CVE-2025-40284 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: cancel mesh send timer when hdev removed mesh_send_done timer is not canceled when hdev is removed, which causes crash if the timer triggers after hdev is gone. Cancel the timer when MGMT removes the hdev, like other MGMT timers. Should fix the BUG: sporadically seen by BlueZ test bot (in "Mesh - Send cancel - 1" test). Log: ------ BUG: KASAN: slab-use-after-free in run_timer_softirq+0x76b/0x7d0 ... Freed by task 36: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_save_free_info+0x3a/0x60 __kasan_slab_free+0x43/0x70 kfree+0x103/0x500 device_release+0x9a/0x210 kobject_put+0x100/0x1e0 vhci_release+0x18b/0x240 ------ | ||||
| CVE-2025-41252 | 1 Vmware | 3 Cloud Foundation, Nsx, Nsx-t | 2026-04-15 | 7.5 High |
| Description: VMware NSX contains a username enumeration vulnerability. An unauthenticated malicious actor may exploit this to enumerate valid usernames, potentially leading to unauthorized access attempts. Impact: Username enumeration → facilitates unauthorized access. Attack Vector: Remote, unauthenticated. Severity: Important. CVSSv3: 7.5 (High). Acknowledgments: Reported by the National Security Agency. Affected Products: * VMware NSX 9.x.x.x, 4.2.x, 4.1.x, 4.0.x * NSX-T 3.x * VMware Cloud Foundation (with NSX) 5.x, 4.5.x Fixed Versions: * NSX 9.0.1.0; 4.2.2.2/4.2.3.1 http://4.2.2.2/4.2.3.1 ; 4.1.2.7; NSX-T 3.2.4.3; CCF async patch (KB88287). Workarounds: None. | ||||
| CVE-2024-54152 | 1 Peerigon | 1 Angular-expressions | 2026-04-15 | N/A |
| Angular Expressions provides expressions for the Angular.JS web framework as a standalone module. Prior to version 1.4.3, an attacker can write a malicious expression that escapes the sandbox to execute arbitrary code on the system. With a more complex (undisclosed) payload, one can get full access to Arbitrary code execution on the system. The problem has been patched in version 1.4.3 of Angular Expressions. Two possible workarounds are available. One may either disable access to `__proto__` globally or make sure that one uses the function with just one argument. | ||||
| CVE-2025-66040 | 1 Spotipy Project | 1 Spotipy | 2026-04-15 | 3.6 Low |
| Spotipy is a Python library for the Spotify Web API. Prior to version 2.25.2, there is a cross-site scripting (XSS) vulnerability in the OAuth callback server that allows for JavaScript injection through the unsanitized error parameter. Attackers can execute arbitrary JavaScript in the user's browser during OAuth authentication. This issue has been patched in version 2.25.2. | ||||
| CVE-2025-55013 | 1 Assemblyline Project | 1 Assemblyline | 2026-04-15 | 4.2 Medium |
| The Assemblyline 4 Service Client interfaces with the API to fetch tasks and publish the result for a service in Assemblyline 4. In versions below 4.6.1.dev138, the Assemblyline 4 Service Client (task_handler.py) accepts a SHA-256 value returned by the service server and uses it directly as a local file name.A malicious or compromised server (or any MITM that can speak to client) can return a path-traversal payload such as `../../../etc/cron.d/evil` and force the client to write the downloaded bytes to an arbitrary location on disk. This is fixed in version 4.6.1.dev138. | ||||
| CVE-2025-59146 | 1 Quantumnous | 1 New-api | 2026-04-15 | 8.5 High |
| New API is a large language mode (LLM) gateway and artificial intelligence (AI) asset management system. An authenticated Server-Side Request Forgery (SSRF) vulnerability exists in versions prior to 0.9.0.5. A feature within the application allows authenticated users to submit a URL for the server to process its content. The application fails to properly validate this user-supplied URL before making a server-side request. This vulnerability is not limited to image URLs and can be triggered with any link provided to the vulnerable endpoint. Since user registration is often enabled by default, any registered user can exploit this. By crafting a malicious URL, an attacker can coerce the server to send requests to arbitrary internal or external services. The vulnerability has been patched in version 0.9.0.5. The patch introduces a comprehensive, user-configurable SSRF protection module, which is enabled by default to protect server security. This new feature provides administrators with granular control over outbound requests made by the server. For users who cannot upgrade immediately, some temporary mitigation options are available. Enable new-api image processing worker (new-api-worker) and/or configure egress firewall rules. | ||||
| CVE-2025-61779 | 1 Confidential-containers | 1 Trustee | 2026-04-15 | 8.6 High |
| Confidential Containers's Trustee project contains tools and components for attesting confidential guests and providing secrets to them. In versions prior to 0.15.0, the attestation-policy endpoint didn't check if the kbs-client submitting the request was actually authenticated (had the right key). This allowed any kbs-client to actually change the attestation policy. Version 0.15.0 fixes the issue. | ||||
| CVE-2025-61783 | 1 Python-social-auth | 1 Social-app-django | 2026-04-15 | 4.8 Medium |
| Python Social Auth is a social authentication/registration mechanism. In versions prior to 5.6.0, upon authentication, the user could be associated by e-mail even if the `associate_by_email` pipeline was not included. This could lead to account compromise when a third-party authentication service does not validate provided e-mail addresses or doesn't require unique e-mail addresses. Version 5.6.0 contains a patch. As a workaround, review the authentication service policy on e-mail addresses; many will not allow exploiting this vulnerability. | ||||
| CVE-2025-65965 | 1 Anchore | 1 Grype | 2026-04-15 | N/A |
| Grype is a vulnerability scanner for container images and filesystems. A credential disclosure vulnerability was found in Grype, affecting versions 0.68.0 through 0.104.0. If registry credentials are defined and the output of grype is written using the --file or --output json=<file> option, the registry credentials will be included unsanitized in the output file. This issue has been patched in version 0.104.1. Users running affected versions of grype can work around this vulnerability by redirecting stdout to a file instead of using the --file or --output options. | ||||