| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Checkout Mestres do WP for WooCommerce plugin for WordPress is vulnerable to unauthorized modification of data that can lead to privilege escalation due to a missing capability check on the cwmpUpdateOptions() function in versions 8.6.5 to 8.7.5. This makes it possible for unauthenticated attackers to update arbitrary options on the WordPress site. This can be leveraged to update the default role for registration to administrator and enable user registration for attackers to gain administrative user access to a vulnerable site. |
| An Improper Access Control could allow a malicious actor authenticated in the API of certain UniFi Connect devices to enable Android Debug Bridge (ADB) and make unsupported changes to the system.
Affected Products:
UniFi Connect EV Station Pro (Version 1.5.18 and earlier)
UniFi Connect Display (Version 1.9.324 and earlier)
UniFi Connect Display Cast (Version 1.9.301 and earlier)
UniFi Connect Display Cast Pro (Version 1.0.78 and earlier)
UniFi Connect Display Cast Lite (Version 1.0.3 and earlier)
Mitigation:
Update UniFi Connect EV Station Pro to Version 1.5.27 or later
Update UniFi Connect Display to Version 1.13.6 or later
Update UniFi Connect Display Cast to Version 1.10.3 or later
Update UniFi Connect Display Cast Pro to Version 1.0.83 or later
Update UniFi Connect Display Cast Lite to Version 1.1.3 or later |
| A vulnerability, which was classified as critical, has been found in Aishida Call Center System up to 20250314. This issue affects some unknown processing of the file /doscall/weixin/open/amr2mp3. The manipulation of the argument File leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| kcp is a Kubernetes-like control plane for form-factors and use-cases beyond Kubernetes and container workloads. Prior to 0.26.3, the identified vulnerability allows creating or deleting an object via the APIExport VirtualWorkspace in any arbitrary target workspace for pre-existing resources. By design, this should only be allowed when the workspace owner decides to give access to an API provider by creating an APIBinding. With this vulnerability, it is possible for an attacker to create and delete objects even if none of these requirements are satisfied, i.e. even if there is no APIBinding in that workspace at all or the workspace owner has created an APIBinding, but rejected a permission claim. A fix for this issue has been identified and has been published with kcp 0.26.3 and 0.27.0. |
| In Deciso OPNsense before 25.7.4, when creating an "Interfaces: Devices: Point-to-Point" entry, the value of the parameter ptpid is not sanitized of HTML-related characters/strings. This value is directly displayed when visiting the page/interfaces_assign.php, which can result in stored cross-site scripting. The attacker must be authenticated with at-least "Interfaces: PPPs: Edit" permission. This vulnerability has been addressed by the vendor in the product release notes as "ui: legacy_html_escape_form_data() was not escaping keys only data elements." |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: fix received length check in big packets
Since commit 4959aebba8c0 ("virtio-net: use mtu size as buffer length
for big packets"), when guest gso is off, the allocated size for big
packets is not MAX_SKB_FRAGS * PAGE_SIZE anymore but depends on
negotiated MTU. The number of allocated frags for big packets is stored
in vi->big_packets_num_skbfrags.
Because the host announced buffer length can be malicious (e.g. the host
vhost_net driver's get_rx_bufs is modified to announce incorrect
length), we need a check in virtio_net receive path. Currently, the
check is not adapted to the new change which can lead to NULL page
pointer dereference in the below while loop when receiving length that
is larger than the allocated one.
This commit fixes the received length check corresponding to the new
change. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix OOB access in parse_adv_monitor_pattern()
In the parse_adv_monitor_pattern() function, the value of
the 'length' variable is currently limited to HCI_MAX_EXT_AD_LENGTH(251).
The size of the 'value' array in the mgmt_adv_pattern structure is 31.
If the value of 'pattern[i].length' is set in the user space
and exceeds 31, the 'patterns[i].value' array can be accessed
out of bound when copied.
Increasing the size of the 'value' array in
the 'mgmt_adv_pattern' structure will break the userspace.
Considering this, and to avoid OOB access revert the limits for 'offset'
and 'length' back to the value of HCI_MAX_AD_LENGTH.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: fix use-after-free due to MST port state bypass
syzbot reported[1] a use-after-free when deleting an expired fdb. It is
due to a race condition between learning still happening and a port being
deleted, after all its fdbs have been flushed. The port's state has been
toggled to disabled so no learning should happen at that time, but if we
have MST enabled, it will bypass the port's state, that together with VLAN
filtering disabled can lead to fdb learning at a time when it shouldn't
happen while the port is being deleted. VLAN filtering must be disabled
because we flush the port VLANs when it's being deleted which will stop
learning. This fix adds a check for the port's vlan group which is
initialized to NULL when the port is getting deleted, that avoids the port
state bypass. When MST is enabled there would be a minimal new overhead
in the fast-path because the port's vlan group pointer is cache-hot.
[1] https://syzkaller.appspot.com/bug?extid=dd280197f0f7ab3917be |
| In the Linux kernel, the following vulnerability has been resolved:
accel/habanalabs: support mapping cb with vmalloc-backed coherent memory
When IOMMU is enabled, dma_alloc_coherent() with GFP_USER may return
addresses from the vmalloc range. If such an address is mapped without
VM_MIXEDMAP, vm_insert_page() will trigger a BUG_ON due to the
VM_PFNMAP restriction.
Fix this by checking for vmalloc addresses and setting VM_MIXEDMAP
in the VMA before mapping. This ensures safe mapping and avoids kernel
crashes. The memory is still driver-allocated and cannot be accessed
directly by userspace. |
| A vulnerability has been identified in COMOS V10.6 (All versions < V10.6.1), COMOS V10.6 (All versions < V10.6.1), JT Bi-Directional Translator for STEP (All versions), NX V2412 (All versions < V2412.8900 with Cloud Entitlement (bundled as NX X)), NX V2506 (All versions < V2506.6000 with Cloud Entitlement (bundled as NX X)), Simcenter 3D (All versions < V2506.6000 with Cloud Entitlement (bundled as Simcenter X Mechanical)), Simcenter Femap (All versions < V2506.0002 with Cloud Entitlement (bundled as Simcenter X Mechanical)), Simcenter Studio (All versions < V2506.0001), Simcenter System Architect (All versions < V2506.0001), Tecnomatix Plant Simulation (All versions < V2504.0007). The SALT SDK is missing server certificate validation while establishing TLS connections to the authorization server. This could allow an attacker to perform a man-in-the-middle attack. |
| Missing Authorization vulnerability in CridioStudio ListingPro listingpro allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects ListingPro: from n/a through <= 2.9.9. |
| SAPUI5 (and OpenUI5) packages use outdated 3rd party libraries with known security vulnerabilities. When markdown-it encounters special malformed input, it fails to terminate properly, resulting in an infinite loop. This Denial of Service via infinite loop causes high CPU usage and system unresponsiveness due to a blocked processing thread. This vulnerability has no impact on confidentiality or integrity but has a high impact on system availability. |
| In affected versions, vulnerability-lookup did not track or limit failed
One-Time Password (OTP) attempts during Two-Factor Authentication (2FA)
verification. An attacker who already knew or guessed a valid username
and password could submit an arbitrary number of OTP codes without
causing the account to be locked or generating any specific alert for
administrators.
This lack of rate-limiting and lockout on OTP failures significantly
lowers the cost of online brute-force attacks against 2FA codes and
increases the risk of successful account takeover, especially if OTP
entropy is reduced (e.g. short numeric codes, user reuse, or predictable
tokens). Additionally, administrators had no direct visibility into
accounts experiencing repeated 2FA failures, making targeted attacks
harder to detect and investigate.
The patch introduces a persistent failed_otp_attempts counter on user
accounts, locks the user after 5 invalid OTP submissions, resets the
counter on successful verification, and surfaces failed 2FA attempts in
the admin user list. This enforces an account lockout policy for OTP
brute-force attempts and improves monitoring capabilities for suspicious
2FA activity.This issue affects Vulnerability-Lookup: before 2.18.0. |
| immich is a high performance self-hosted photo and video management solution. Prior to 1.132.0, immich is vulnerable to account hijacking through oauth2, because the state parameter is not being checked. The oauth2 state parameter is similar to a csrf token, so when the user starts the login flow this unpredictable token is generated and somehow saved in the browser session and passed to the identity provider, which will return the state parameter when redirecting the user back to immich. Before the user is logged in that parameter needs to be verified to make sure the login was actively initiated by the user in this browser session. On it's own, this wouldn't be too bad, but when immich uses the /user-settings page as a redirect_uri, it will automatically link the accounts if the user was already logged in. This means that if someone has an immich instance with a public oauth provider (like google), an attacker can - for example - embed a hidden iframe in a webpage or even just send the victim a forged oauth login url with a code that logs the victim into the attackers oauth account and redirects back to immich and links the accounts. After this, the attacker can log into the victims account using their own oauth credentials. This vulnerability is fixed in 1.132.0. |
| Micro Registration Utility (µURU) is a telephone self registration utility based on asterisk. In versions up to and including commit 88db9a953f38a3026bcd6816d51c7f3b93c55893, an attacker can crafts a special federation name and characters treated special by asterisk can be injected into the `Dial( )` application due to improper input validation. This allows an attacker to redirect calls on both of the federating instances. If the attack succeeds, the impact is very high. However, the requires that an admin accept the federation requests. As of time of publication, a known patched version of µURU is not available. |
| Starlette is a lightweight ASGI (Asynchronous Server Gateway Interface) framework/toolkit, designed for building async web services in Python. In versions 0.47.1 and below, when parsing a multi-part form with large files (greater than the default max spool size) starlette will block the main thread to roll the file over to disk. This blocks the event thread which means the application can't accept new connections. The UploadFile code has a minor bug where instead of just checking for self._in_memory, the logic should also check if the additional bytes will cause a rollover. The vulnerability is fixed in version 0.47.2. |
| Phproject is a high performance full-featured project management system. From 1.8.0 to before 1.8.3, a Stored Cross-Site Scripting (XSS) vulnerability exists in the Planned Hours field when creating a new project. When sending a POST request to /issues/new/, the value provided in the Planned Hours field is included in the server response without any HTML encoding or sanitization. Because of this, an attacker can craft a malicious payload such as <script>alert(1)</script> and include it in the planned_hours parameter. The server reflects the input directly in the HTML of the project creation page, causing the browser to interpret and execute it. This vulnerability is fixed in 1.8.3. |
| StreamVault is a multi-platform video parsing and downloading tool. Prior to version 250822, after logging into the StreamVault-system, an attacker can modify certain system parameters, construct malicious commands, execute command injection attacks against the system, and ultimately gain server privileges. Users of all versions of the StreamVault system to date who have not modified their background passwords or use weak passwords are at risk of having their systems taken over via remote command execution. This issue has been patched in version 250822. |
| A vulnerability in the Software SMI handler (SwSmiInputValue 0xB2) allows a local attacker to control both the read and write addresses used by the CommandRcx1 function. The write target is derived from an unvalidated UEFI NVRAM variable (SetupXtuBufferAddress), while the write content is read from an attacker-controlled pointer based on the RBX register. This dual-pointer dereference enables arbitrary memory writes within System Management RAM (SMRAM), leading to potential SMM privilege escalation and firmware compromise. |
| A vulnerability was found in LiveHelperChat lhc-php-resque Extension up to ee1270b35625f552425e32a6a3061cd54b5085c4. It has been classified as problematic. This affects an unknown part of the file /site_admin/lhcphpresque/list/ of the component List Handler. The manipulation of the argument queue name leads to cross site scripting. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. The identifier of the patch is 542aa8449b5aa889b3a54f419e794afe19f56d5d/0ce7b4f1193c0ed6c6e31a960fafededf979eef2. It is recommended to apply a patch to fix this issue. |
