| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: fib: free fib_alias with kfree_rcu() on insert error path
fib_table_insert() publishes new_fa into the leaf's fa_list with
fib_insert_alias() before calling the fib entry notifiers. When a
notifier fails, the error path removes new_fa with fib_remove_alias()
(hlist_del_rcu) and frees it right away with kmem_cache_free().
fib_table_lookup() walks that list under rcu_read_lock() only, so a
concurrent lookup that already reached new_fa keeps reading it after the
free:
BUG: KASAN: slab-use-after-free in fib_table_lookup (net/ipv4/fib_trie.c:1601)
Read of size 1 at addr ffff88810676d4eb by task exploit/297
Call Trace:
fib_table_lookup (net/ipv4/fib_trie.c:1601)
ip_route_output_key_hash_rcu (net/ipv4/route.c:2814)
ip_route_output_key_hash (net/ipv4/route.c:2705)
__ip4_datagram_connect (net/ipv4/datagram.c:49)
udp_connect (net/ipv4/udp.c:2144)
__sys_connect (net/socket.c:2167)
__x64_sys_connect (net/socket.c:2173)
do_syscall_64
entry_SYSCALL_64_after_hwframe
which belongs to the cache ip_fib_alias of size 56
Triggering the error path needs CAP_NET_ADMIN and a registered fib
notifier that can reject a route; a netdevsim device whose IPv4 FIB
resource is exhausted is enough.
Free new_fa with alias_free_mem_rcu(), as fib_table_delete() already
does for a fib_alias removed from the trie. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: p54: validate RX frame length in p54_rx_eeprom_readback()
p54_rx_eeprom_readback() copies the requested EEPROM slice out of a
device-supplied readback frame without checking that the skb actually holds
that many bytes. Commit da1b9a55ff11 ("wifi: p54: prevent buffer-overflow in
p54_rx_eeprom_readback()") closed the destination overflow by copying a
fixed priv->eeprom_slice_size (and rejecting a mismatched advertised len),
but the source side is still unbounded: nothing verifies the frame is long
enough to supply that many bytes.
A malicious USB device can send a short frame whose advertised len matches
priv->eeprom_slice_size while the payload is truncated. The equality check
passes and memcpy() reads past the end of the skb, leaking adjacent heap:
BUG: KASAN: slab-out-of-bounds in p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507)
Read of size 1016 at addr ffff88800f077114 by task swapper/0/0
Call Trace:
<IRQ>
...
__asan_memcpy (mm/kasan/shadow.c:105)
p54_rx (drivers/net/wireless/intersil/p54/txrx.c:507)
p54u_rx_cb (drivers/net/wireless/intersil/p54/p54usb.c:163)
__usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657)
dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:2005)
...
</IRQ>
The buggy address belongs to the object at ffff88800f0770c0
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 84 bytes inside of
allocated 704-byte region [ffff88800f0770c0, ffff88800f077380)
Check that the slice fits in the skb before copying. |
| In the Linux kernel, the following vulnerability has been resolved:
mpls: fix NULL deref in mpls_valid_fib_dump_req() on CONFIG_INET=n
On CONFIG_INET=n builds, mpls_valid_fib_dump_req() walks the parsed
attribute table itself instead of calling ip_valid_fib_dump_req(). The
RTA_OIF arm passes tb[RTA_OIF] to nla_get_u32() without checking it is
present, so an RTM_GETROUTE dump for AF_MPLS with strict checking and no
RTA_OIF hits a NULL dereference.
RTM_GETROUTE is RTNL_KIND_GET, which rtnetlink_rcv_msg() permits without
CAP_NET_ADMIN, so an unprivileged user can trigger it.
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:mpls_valid_fib_dump_req (net/mpls/af_mpls.c:2189)
Call Trace:
mpls_dump_routes (net/mpls/af_mpls.c:2236)
netlink_dump (net/netlink/af_netlink.c:2331)
__netlink_dump_start (net/netlink/af_netlink.c:2446)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7033)
netlink_rcv_skb (net/netlink/af_netlink.c:2556)
netlink_unicast (net/netlink/af_netlink.c:1345)
netlink_sendmsg (net/netlink/af_netlink.c:1900)
__sock_sendmsg (net/socket.c:790)
____sys_sendmsg (net/socket.c:2684)
___sys_sendmsg (net/socket.c:2738)
__sys_sendmsg (net/socket.c:2770)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Skip unset attributes, as ip_valid_fib_dump_req() does. |
| In the Linux kernel, the following vulnerability has been resolved:
net: psample: fix info leak in PSAMPLE_ATTR_DATA
psample open codes nla_put() presumably to avoid wiping
the data with 0s just to override it with packet data.
This open coding is missing clearing the pad, however,
each netlink attr is padded to 4B and data_len may
not be divisible by 4B. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bpa10x: avoid OOB read of revision string in bpa10x_setup()
bpa10x_setup() sends the vendor command 0xfc0e and passes the response
to bt_dev_info() and hci_set_fw_info() as a "%s" string starting at
skb->data + 1, without checking the length:
bt_dev_info(hdev, "%s", (char *)(skb->data + 1));
hci_set_fw_info(hdev, "%s", skb->data + 1);
A device that returns a one-byte response (status only) leaves
skb->data + 1 past the end of the data, and the %s walk reads adjacent
slab memory until it meets a NUL. The same happens when the payload is
not NUL-terminated within skb->len. The out-of-bounds bytes end up in
the kernel log and the firmware-info debugfs file.
Print the revision string with a bounded "%.*s" limited to skb->len - 1
instead. This keeps the string readable for well-behaved devices while
never reading past the received data, and does not fail setup, so a
device returning a short or unterminated response keeps working. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: asymmetric_keys - fix OOB read in pefile_digest_pe_contents
pefile_digest_pe_contents() computes the trailing-data hash length as
pelen - (hashed_bytes + certs_size). A crafted PE can make the addition
exceed pelen, causing the unsigned subtraction to underflow to ~4 GiB.
This is passed to crypto_shash_update() which reads out of bounds and
panics on unmapped vmalloc guard pages.
BUG: unable to handle page fault for address: ffffc900038d8000
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:sha256_blocks_generic (lib/crypto/sha256.c:152)
Call Trace:
<TASK>
__sha256_update (lib/crypto/sha256.c:208)
crypto_sha256_update (crypto/sha256.c:142)
verify_pefile_signature (crypto/asymmetric_keys/verify_pefile.c:436)
kexec_kernel_verify_pe_sig (kernel/kexec_file.c:151)
__do_sys_kexec_file_load (kernel/kexec_file.c:406)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
</TASK>
Kernel panic - not syncing: Fatal exception
Validate that the addition does not overflow and the result does not
exceed pelen before the subtraction. Return -ELIBBAD on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: ndisc: fix NULL deref in accept_untracked_na()
accept_untracked_na() re-fetches the inet6_dev with __in6_dev_get(dev)
and dereferences idev->cnf.accept_untracked_na without a NULL check,
even though its only caller ndisc_recv_na() already fetched and
NULL-checked idev for the same device.
Both reads of dev->ip6_ptr run in the same RCU read-side critical
section, but a concurrent addrconf_ifdown() can clear dev->ip6_ptr
between them: lowering the MTU below IPV6_MIN_MTU calls addrconf_ifdown()
without the synchronize_net() that orders the unregister path, so the
re-fetch returns NULL and oopses:
BUG: KASAN: null-ptr-deref in ndisc_recv_na (net/ipv6/ndisc.c:974)
Read of size 4 at addr 0000000000000364
Call Trace:
<IRQ>
ndisc_recv_na (net/ipv6/ndisc.c:974)
icmpv6_rcv (net/ipv6/icmp.c:1193)
ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:479)
ip6_input_finish (net/ipv6/ip6_input.c:534)
ip6_input (net/ipv6/ip6_input.c:545)
ip6_mc_input (net/ipv6/ip6_input.c:635)
ipv6_rcv (net/ipv6/ip6_input.c:351)
</IRQ>
It is reachable by an unprivileged user via a network namespace.
Pass the caller's already validated idev instead of re-fetching it; the
idev stays alive for the whole RCU critical section, so it is safe even
after dev->ip6_ptr has been cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix null-ptr-deref in fib6_nh_mtu_change().
fib6_nh_mtu_change() re-fetches idev via __in6_dev_get(arg->dev) and
dereferences idev->cnf.mtu6 without a NULL check. addrconf_ifdown()
clears dev->ip6_ptr with RCU_INIT_POINTER() after rt6_disable_ip() has
released tb6_lock, so the RA-driven MTU walk can observe a NULL idev and
oops. The caller rt6_mtu_change_route() guards its own __in6_dev_get(),
but this re-fetch is unguarded; nexthop-backed routes survive
addrconf_ifdown()'s flush, so the walk still reaches it after ip6_ptr is
nulled.
Return 0 when idev is NULL, matching rt6_mtu_change_route() and the
fib6_mtu() fix in commit 5ad509c1fdad ("ipv6: Fix null-ptr-deref in
fib6_mtu().").
Oops: general protection fault, ... KASAN: null-ptr-deref in range
[0x00000000000002a8-0x00000000000002af]
RIP: 0010:fib6_nh_mtu_change+0x203/0x990
rt6_mtu_change_route+0x141/0x1d0
__fib6_clean_all+0xd0/0x160
rt6_mtu_change+0xb4/0x100
ndisc_router_discovery+0x24b5/0x2cb0
icmpv6_rcv+0x12e9/0x1710
ipv6_rcv+0x39b/0x410 |
| In the Linux kernel, the following vulnerability has been resolved:
userfaultfd: gate must_wait writability check on pte_present()
userfaultfd_must_wait() and userfaultfd_huge_must_wait() read the PTE
without taking the page table lock and then apply pte_write() /
huge_pte_write() to it. Those accessors decode bits from the present
encoding only; on a swap or migration entry they read the offset bits that
happen to share the same position and return an undefined result.
The intent of the check is "is this fault still WP-blocked?". A
non-marker swap entry means the page is in transit -- the userfault
context the original fault delivered against is no longer the same, and
the swap-in or migration completion path will re-deliver a fresh fault if
userspace still needs to handle it. Worst case under the current code the
garbage write bit says "wait", and the thread stays asleep until a
UFFDIO_WAKE that may never arrive.
Gate the writability check on pte_present() so the lockless re-check only
inspects present-PTE bits when the entry is actually present. The
non-present, non-marker case returns "don't wait" and lets the fault path
retry. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: CPPC: Suppress UBSAN warning caused by field misuse
The definition of reg->access_width changes depending on the
reg->space_id type. Type ACPI_ADR_SPACE_PLATFORM_COMM uses
access_width to indicate the PCC region, which can result in a UBSAN
if the value is greater than 4.
For example:
UBSAN: shift-out-of-bounds in drivers/acpi/cppc_acpi.c:1090:9
shift exponent 32 is too large for 32-bit type 'int'
CPU: 61 UID: 0 PID: 1220 Comm: (udev-worker) Not tainted 7.0.10-201.fc44.aarch64 #1 PREEMPT(lazy)
Hardware name: To be filled by O.E.M.
Call trace:
...(trimming)
ubsan_epilogue+0x10/0x48
__ubsan_handle_shift_out_of_bounds+0xdc/0x1e0
cpc_write+0x4d0/0x670
cppc_set_perf+0x18c/0x490
cppc_cpufreq_cpu_init+0x1c8/0x380 [cppc_cpufreq]
... (trimming)
Lets fix this by validating the region type, as well as whether
access_width has a value. Then since we are returning bit_width
directly for ACPI_ADR_SPACE_PLATFORM_COMM, drop the code correcting
the size. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Support for hardening against JIT spraying
The BPF JIT allocator packs many small programs into larger executable
allocations and reuses space within those allocations as programs are
loaded and freed. When fresh code is written into space that a previous
program occupied, an indirect jump into the new program can reuse a branch
prediction left behind by the old one.
Flush the indirect branch predictors before reusing JIT memory so that
indirect jumps into a newly written program don't reuse predictions from an
old program that occupied the same space.
Introduce bpf_arch_pred_flush_enabled static key and bpf_arch_pred_flush
static call for flushing the branch predictors on JIT memory reuse.
Architectures that need a flush, can update it to a predictor flush
function. By default, its a NOP and does not emit any CALL.
Allocations larger than a pack are not covered by this flush. That is safe
because cBPF programs (the unprivileged attack surface) are bounded well
below a pack size. Issue a warning if this assumption is ever violated
while the flush is active. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/bugs: Enable IBPB flush on BPF JIT allocation
Enable hardening against JIT spraying when Spectre-v2 mitigations are in
use. Specifically, issue an IBPB flush on BPF JIT memory reuse. Skip
enabling the IBPB flush if the BPF dispatcher is already using a retpoline
sequence.
This hardening applies only when BPF-JIT is in use. Guard the enabling
under CONFIG_BPF_JIT so that bugs.c still builds with CONFIG_BPF_JIT=n. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: bmc150: clamp the device-reported FIFO frame count
__bmc150_accel_fifo_flush() copies the number of samples the device
reports in its hardware FIFO into an on-stack buffer
u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3];
which is sized for at most BMC150_ACCEL_FIFO_LENGTH (32) samples. The
frame count is read from the FIFO_STATUS register and only masked to its
7 valid bits:
count = val & 0x7F;
so it can be 0..127. The only other limit applied to it is the optional
caller-supplied sample budget:
if (samples && count > samples)
count = samples;
which does not constrain count on the flush-all path (samples == 0), and
leaves it well above 32 whenever samples is larger. count samples are
then transferred into buffer[]:
bmc150_accel_fifo_transfer(data, (u8 *)buffer, count);
bmc150_accel_fifo_transfer() reads count * 6 bytes through regmap, so a
malfunctioning, malicious or counterfeit accelerometer (or an attacker
tampering with the I2C/SPI bus) that reports up to 127 frames writes up
to 762 bytes into the 192-byte buffer: a stack out-of-bounds write of up
to 570 bytes that clobbers the stack canary, saved registers and the
return address.
Clamp count to BMC150_ACCEL_FIFO_LENGTH, the number of samples buffer[]
is sized for, before the transfer, mirroring the watermark clamp already
done in bmc150_accel_set_watermark(). A well-formed flush reports at most
BMC150_ACCEL_FIFO_LENGTH frames, so legitimate devices are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: kxsd9: fix runtime PM imbalance on write_raw() error
kxsd9_write_raw() takes a runtime PM reference with pm_runtime_get_sync()
but returns -EINVAL directly when a scale with a non-zero integer part is
requested, skipping the matching pm_runtime_put_autosuspend(). This leaks
a runtime PM usage-counter reference on every such write, after which the
device can no longer autosuspend.
Set the error code and fall through to the existing put instead of
returning early. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: es1938: check snd_ctl_new1() return value
snd_ctl_new1() can return NULL when memory allocation fails.
snd_es1938_mixer() does not check the return value before dereferencing
the pointer, which can lead to a NULL pointer dereference.
Add a NULL check after snd_ctl_new1() and return -ENOMEM if it fails. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: firewire: isight: bound the sample count to the packet payload
isight_packet() takes the frame count from the device iso packet and
checks it only against the device claimed iso length.
count = be32_to_cpu(payload->sample_count);
if (likely(count <= (length - 16) / 4))
isight_samples(isight, payload->samples, count);
length is the iso header data_length. It can be up to 0xffff. So the
gate allows a count up to about 16379. isight_samples() then copies
count frames out of payload->samples into the PCM DMA buffer.
payload->samples holds only 2 * MAX_FRAMES_PER_PACKET values. The
device multiplexes two samples per frame. A count past
MAX_FRAMES_PER_PACKET reads past the payload. A count past the buffer
size writes past runtime->dma_area. The smallest PCM buffer is larger
than MAX_FRAMES_PER_PACKET. Bounding the count to MAX_FRAMES_PER_PACKET
keeps both the read and the write in range.
A malicious or faulty Apple iSight on the FireWire bus reaches this
during a normal capture.
Add the MAX_FRAMES_PER_PACKET bound to the gate. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix heap buffer overflow in rtw_cfg80211_set_wpa_ie()
supplicant_ie is a 256-byte array in struct security_priv. The WPA and
WPA2 IE copy paths use:
memcpy(padapter->securitypriv.supplicant_ie, &pwpa[0], wpa_ielen + 2);
where wpa_ielen is the raw IE length field (u8, 0-255). When a local user
supplies a connect request via nl80211 with a crafted WPA IE of length 255,
wpa_ielen + 2 equals 257, overflowing the 256-byte buffer by one byte into
the adjacent last_mic_err_time field.
rtw_parse_wpa_ie() does not prevent this: its length consistency check
compares *(wpa_ie+1) against (u8)(wpa_ie_len-2), which is (u8)(255) == 255
when wpa_ie_len = 257, so the check passes silently.
Add explicit bounds checks for both the WPA and WPA2 paths before the
memcpy, rejecting any IE whose total size (wpa_ielen + 2) exceeds the
supplicant_ie buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix UAF of hci_conn_params in add_device_complete
add_device_complete() runs from the hci_cmd_sync_work kworker, which
holds only hci_req_sync_lock and *not* hci_dev_lock. It calls
hci_conn_params_lookup() and then dereferences the returned object
(params->flags) without taking hci_dev_lock:
params = hci_conn_params_lookup(hdev, &cp->addr.bdaddr,
le_addr_type(cp->addr.type));
...
device_flags_changed(NULL, hdev, &cp->addr.bdaddr,
cp->addr.type, hdev->conn_flags,
params ? params->flags : 0);
hci_conn_params_lookup() walks hdev->le_conn_params and is documented to
require hdev->lock. A concurrent MGMT_OP_REMOVE_DEVICE
(remove_device()), which does run under hci_dev_lock, can call
hci_conn_params_free() to list_del() and kfree() the very object the
lookup returned, so the subsequent params->flags read touches freed
memory [0].
Hold hci_dev_lock() across the hci_conn_params_lookup() and the read of
params->flags (and the matching event emission) so the lookup result
cannot be freed by a concurrent remove_device() before it is used,
honouring the locking contract of hci_conn_params_lookup().
[0]: (trailing page/memory-state dump trimmed)
BUG: KASAN: slab-use-after-free in add_device_complete+0x358/0x3d8 net/bluetooth/mgmt.c:7671
Read of size 1 at addr ffff000017ab26c1 by task kworker/u9:8/388
CPU: 1 UID: 0 PID: 388 Comm: kworker/u9:8 Not tainted 7.0.11 #20 PREEMPT
Hardware name: linux,dummy-virt (DT)
Workqueue: hci0 hci_cmd_sync_work
Call trace:
show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:499 (C)
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xb4/0xd4 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0x118/0x5d8 mm/kasan/report.c:482
kasan_report+0xb0/0xf4 mm/kasan/report.c:595
__asan_report_load1_noabort+0x20/0x2c mm/kasan/report_generic.c:378
add_device_complete+0x358/0x3d8 net/bluetooth/mgmt.c:7671
hci_cmd_sync_work+0x14c/0x240 net/bluetooth/hci_sync.c:334
process_one_work+0x628/0xd38 kernel/workqueue.c:3289
process_scheduled_works kernel/workqueue.c:3372 [inline]
worker_thread+0x7a8/0xac0 kernel/workqueue.c:3453
kthread+0x39c/0x444 kernel/kthread.c:436
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860
Allocated by task 3401:
kasan_save_stack+0x3c/0x64 mm/kasan/common.c:57
kasan_save_track+0x20/0x3c mm/kasan/common.c:78
kasan_save_alloc_info+0x40/0x54 mm/kasan/generic.c:570
poison_kmalloc_redzone mm/kasan/common.c:398 [inline]
__kasan_kmalloc+0xd4/0xd8 mm/kasan/common.c:415
kasan_kmalloc include/linux/kasan.h:263 [inline]
__kmalloc_cache_noprof+0x1b0/0x458 mm/slub.c:5385
kmalloc_noprof include/linux/slab.h:950 [inline]
kzalloc_noprof include/linux/slab.h:1188 [inline]
hci_conn_params_add+0x10c/0x4b0 net/bluetooth/hci_core.c:2279
hci_conn_params_set net/bluetooth/mgmt.c:5162 [inline]
add_device+0x5b4/0xa54 net/bluetooth/mgmt.c:7755
hci_mgmt_cmd net/bluetooth/hci_sock.c:1721 [inline]
hci_sock_sendmsg+0x10b4/0x1dd0 net/bluetooth/hci_sock.c:1841
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg+0xe0/0x128 net/socket.c:742
sock_write_iter+0x250/0x390 net/socket.c:1195
new_sync_write fs/read_write.c:595 [inline]
vfs_write+0x66c/0xab0 fs/read_write.c:688
ksys_write+0x1fc/0x24c fs/read_write.c:740
__do_sys_write fs/read_write.c:751 [inline]
__se_sys_write fs/read_write.c:748 [inline]
__arm64_sys_write+0x70/0xa4 fs/read_write.c:748
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x84/0x2a8 arch/arm64/kernel/syscall.c:49
el0_svc_common.constprop.0+0xe4/0x294 arch/arm64/kernel/syscall.c:132
do_el0_svc+0x44/0x5c arch/arm64/kernel/syscall.c:151
el0_svc+0x38/0xac arch/arm64/kernel/entry-common.c:724
el0t_64_sync_handler+0xa0/0xe4 arch/arm64/kernel/entry-common.c:743
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:596
Freed by task 3740:
kasan_save_stack+0x3c/0x64
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
HID: logitech-dj: Fix maxfield check in DJ short report validation
Commit b6a57912854e ("HID: logitech-dj: Prevent REPORT_ID_DJ_SHORT
related user initiated OOB write") added validation for the DJ short
output report, but the error path dereferences rep->field[0] even when
rep->maxfield is zero.
Commit 8b9a097eb2fc ("HID: logitech-dj: fix wrong detection of bad
DJ_SHORT output report") made the check conditional on rep being present,
but a crafted descriptor can still create report ID 0x20 with only padding
output items. hid-core registers the report, ignores the padding field,
and leaves rep->maxfield as zero.
In that case the validation enters the rep->maxfield < 1 branch and then
dereferences rep->field[0]->report_count while printing the error message,
causing a NULL pointer dereference during probe. This is reproducible with
uhid by emulating a Logitech receiver with a padding-only DJ short output
report:
BUG: KASAN: null-ptr-deref in logi_dj_probe+0xb1/0x754 [hid_logitech_dj]
Read of size 4 at addr 0000000000000028 by task kworker/4:1/129
...
Call Trace:
logi_dj_probe+0xb1/0x754 [hid_logitech_dj]
hid_device_probe+0x329/0x3f0 [hid]
really_probe+0x162/0x570
__device_attach+0x137/0x2c0
bus_probe_device+0x38/0xc0
device_add+0xa56/0xce0
hid_add_device+0x19c/0x280 [hid]
uhid_device_add_worker+0x2c/0xb0 [uhid]
Reject the zero-field report before printing the field report_count. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/nop: fix file reference leak with IOSQE_FIXED_FILE
NOP file-acquisition support choses between a fixed (registered) file and
a normal fget()'d file based on its own IORING_NOP_FIXED_FILE flag in
sqe->nop_flags. However, a request's REQ_F_FIXED_FILE is set
independently from the generic IOSQE_FIXED_FILE sqe flag during request
init, before the issue handler runs.
If a NOP is submitted with IOSQE_FIXED_FILE set (so REQ_F_FIXED_FILE is
set) but without IORING_NOP_FIXED_FILE, io_nop() takes the normal path
and grabs a real reference via io_file_get_normal(). On completion,
io_put_file() only drops the reference when REQ_F_FIXED_FILE is clear,
so the fget()'d file is never released and leaks:
BUG: memory leak
unreferenced object 0xffff88800f42c240 (size 176):
kmem_cache_alloc_noprof+0x358/0x440
alloc_empty_file+0x57/0x180
path_openat+0x44/0x1e50
do_file_open+0x121/0x200
do_sys_openat2+0xa7/0x150
__x64_sys_openat+0x82/0xf0
Decide between fixed and normal file acquisition from REQ_F_FIXED_FILE,
the same way io_assign_file() does for every other opcode, and fold
IORING_NOP_FIXED_FILE into REQ_F_FIXED_FILE at prep time. |
