| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Innoshop through 0.4.1, an authenticated attacker could exploit the File Manager functions in the admin panel to achieve code execution on the server, by uploading a crafted file and then renaming it to have a .php extension by using the Rename Function. This bypasses the initial check that uploaded files are image files. The application relies on frontend checks to restrict the administrator from changing the extension of uploaded files to .php. This restriction is easily bypassed with any proxy tool (e.g., BurpSuite). Once the attacker renames the file, and gives it the .php extension, a GET request can be used to trigger the execution of code on the server. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: sc16is7xx: setup GPIO controller later in probe
The GPIO controller component of the sc16is7xx driver is setup too
early, which can result in a race condition where another device tries
to utilise the GPIO lines before the sc16is7xx device has finished
initialising.
This issue manifests itself as an Oops when the GPIO lines are configured:
Unable to handle kernel read from unreadable memory at virtual address
...
pc : sc16is7xx_gpio_direction_output+0x68/0x108 [sc16is7xx]
lr : sc16is7xx_gpio_direction_output+0x4c/0x108 [sc16is7xx]
...
Call trace:
sc16is7xx_gpio_direction_output+0x68/0x108 [sc16is7xx]
gpiod_direction_output_raw_commit+0x64/0x318
gpiod_direction_output+0xb0/0x170
create_gpio_led+0xec/0x198
gpio_led_probe+0x16c/0x4f0
platform_drv_probe+0x5c/0xb0
really_probe+0xe8/0x448
driver_probe_device+0xe8/0x138
__device_attach_driver+0x94/0x118
bus_for_each_drv+0x8c/0xe0
__device_attach+0x100/0x1b8
device_initial_probe+0x28/0x38
bus_probe_device+0xa4/0xb0
deferred_probe_work_func+0x90/0xe0
process_one_work+0x1c4/0x480
worker_thread+0x54/0x430
kthread+0x138/0x150
ret_from_fork+0x10/0x1c
This patch moves the setup of the GPIO controller functions to later in the
probe function, ensuring the sc16is7xx device has already finished
initialising by the time other devices try to make use of the GPIO lines.
The error handling has also been reordered to reflect the new
initialisation order. |
| WonderCMS 4.3.2 contains a cross-site scripting vulnerability that allows attackers to inject malicious JavaScript through the module installation endpoint. Attackers can craft a specially designed XSS payload to install a reverse shell module and execute remote commands by tricking an authenticated administrator into accessing a malicious link. |
| In the Linux kernel, the following vulnerability has been resolved:
inotify: Avoid reporting event with invalid wd
When inotify_freeing_mark() races with inotify_handle_inode_event() it
can happen that inotify_handle_inode_event() sees that i_mark->wd got
already reset to -1 and reports this value to userspace which can
confuse the inotify listener. Avoid the problem by validating that wd is
sensible (and pretend the mark got removed before the event got
generated otherwise). |
| Improper processing of some parameters of installed_emanual_list.html leads to a path traversal vulnerability. As for the details of affected product names, model numbers, and versions, refer to the information provided by the respective vendors listed under [References]. |
| APC Network Management Card 4 contains a path traversal vulnerability that allows unauthenticated attackers to access sensitive system files by manipulating URL parameters. Attackers can exploit directory traversal techniques to read critical system files like /etc/passwd by using encoded path traversal characters in HTTP requests. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Fix race condition in hidp_session_thread
There is a potential race condition in hidp_session_thread that may
lead to use-after-free. For instance, the timer is active while
hidp_del_timer is called in hidp_session_thread(). After hidp_session_put,
then 'session' will be freed, causing kernel panic when hidp_idle_timeout
is running.
The solution is to use del_timer_sync instead of del_timer.
Here is the call trace:
? hidp_session_probe+0x780/0x780
call_timer_fn+0x2d/0x1e0
__run_timers.part.0+0x569/0x940
hidp_session_probe+0x780/0x780
call_timer_fn+0x1e0/0x1e0
ktime_get+0x5c/0xf0
lapic_next_deadline+0x2c/0x40
clockevents_program_event+0x205/0x320
run_timer_softirq+0xa9/0x1b0
__do_softirq+0x1b9/0x641
__irq_exit_rcu+0xdc/0x190
irq_exit_rcu+0xe/0x20
sysvec_apic_timer_interrupt+0xa1/0xc0 |
| Improper input validation for some Intel(R) PROSet/Wireless WiFi software for Windows before version 23.60 may allow a privileged user to potentially enable denial of service via local access. |
| Admin authentication can be bypassed with some specific invalid credentials, which allows logging in with an administrative privilege. Sharp Corporation states the telnet feature is implemented on older models only, and is planning to provide the firmware update to remove the feature. As for the details of affected product names, model numbers, and versions, refer to the information provided by the respective vendors listed under [References]. |
| Missing authentication for critical function vulnerability exists in ID Link Manager and FUJITSU Software TIME CREATOR. If this vulnerability is exploited, sensitive information may be obtained and/or the information stored in the database may be altered by a remote authenticated attacker. |
| An flaw was found in the OpenStack Platform (RHOSP) director, a toolset for installing and managing a complete RHOSP environment. Plaintext passwords may be stored in log files, which can expose sensitive information to anyone with access to the logs. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in XforWooCommerce allows PHP Local File Inclusion.This issue affects XforWooCommerce: from n/a through 2.0.2. |
| A vulnerability was found in Satellite. When running a remote execution job on a host, the host's SSH key is not being checked. When the key changes, the Satellite still connects it because it uses "-o StrictHostKeyChecking=no". This flaw can lead to a man-in-the-middle attack (MITM), denial of service, leaking of secrets the remote execution job contains, or other issues that may arise from the attacker's ability to forge an SSH key. This issue does not directly allow unauthorized remote execution on the Satellite, although it can leak secrets that may lead to it. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix memleak for 'conf->bio_split'
In the error path of raid10_run(), 'conf' need be freed, however,
'conf->bio_split' is missed and memory will be leaked.
Since there are 3 places to free 'conf', factor out a helper to fix the
problem. |
| Pixmeo OsiriX MD is vulnerable to a local use after free scenario, which could allow an attacker to locally import a crafted DICOM file and cause memory corruption or a system crash. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to drop all dirty pages during umount() if cp_error is set
xfstest generic/361 reports a bug as below:
f2fs_bug_on(sbi, sbi->fsync_node_num);
kernel BUG at fs/f2fs/super.c:1627!
RIP: 0010:f2fs_put_super+0x3a8/0x3b0
Call Trace:
generic_shutdown_super+0x8c/0x1b0
kill_block_super+0x2b/0x60
kill_f2fs_super+0x87/0x110
deactivate_locked_super+0x39/0x80
deactivate_super+0x46/0x50
cleanup_mnt+0x109/0x170
__cleanup_mnt+0x16/0x20
task_work_run+0x65/0xa0
exit_to_user_mode_prepare+0x175/0x190
syscall_exit_to_user_mode+0x25/0x50
do_syscall_64+0x4c/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
During umount(), if cp_error is set, f2fs_wait_on_all_pages() should
not stop waiting all F2FS_WB_CP_DATA pages to be writebacked, otherwise,
fsync_node_num can be non-zero after f2fs_wait_on_all_pages() causing
this bug.
In this case, to avoid deadloop in f2fs_wait_on_all_pages(), it needs
to drop all dirty pages rather than redirtying them. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Return error for inconsistent extended attributes
ntfs_read_ea is called when we want to read extended attributes. There
are some sanity checks for the validity of the EAs. However, it fails to
return a proper error code for the inconsistent attributes, which might
lead to unpredicted memory accesses after return.
[ 138.916927] BUG: KASAN: use-after-free in ntfs_set_ea+0x453/0xbf0
[ 138.923876] Write of size 4 at addr ffff88800205cfac by task poc/199
[ 138.931132]
[ 138.933016] CPU: 0 PID: 199 Comm: poc Not tainted 6.2.0-rc1+ #4
[ 138.938070] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[ 138.947327] Call Trace:
[ 138.949557] <TASK>
[ 138.951539] dump_stack_lvl+0x4d/0x67
[ 138.956834] print_report+0x16f/0x4a6
[ 138.960798] ? ntfs_set_ea+0x453/0xbf0
[ 138.964437] ? kasan_complete_mode_report_info+0x7d/0x200
[ 138.969793] ? ntfs_set_ea+0x453/0xbf0
[ 138.973523] kasan_report+0xb8/0x140
[ 138.976740] ? ntfs_set_ea+0x453/0xbf0
[ 138.980578] __asan_store4+0x76/0xa0
[ 138.984669] ntfs_set_ea+0x453/0xbf0
[ 138.988115] ? __pfx_ntfs_set_ea+0x10/0x10
[ 138.993390] ? kernel_text_address+0xd3/0xe0
[ 138.998270] ? __kernel_text_address+0x16/0x50
[ 139.002121] ? unwind_get_return_address+0x3e/0x60
[ 139.005659] ? __pfx_stack_trace_consume_entry+0x10/0x10
[ 139.010177] ? arch_stack_walk+0xa2/0x100
[ 139.013657] ? filter_irq_stacks+0x27/0x80
[ 139.017018] ntfs_setxattr+0x405/0x440
[ 139.022151] ? __pfx_ntfs_setxattr+0x10/0x10
[ 139.026569] ? kvmalloc_node+0x2d/0x120
[ 139.030329] ? kasan_save_stack+0x41/0x60
[ 139.033883] ? kasan_save_stack+0x2a/0x60
[ 139.037338] ? kasan_set_track+0x29/0x40
[ 139.040163] ? kasan_save_alloc_info+0x1f/0x30
[ 139.043588] ? __kasan_kmalloc+0x8b/0xa0
[ 139.047255] ? __kmalloc_node+0x68/0x150
[ 139.051264] ? kvmalloc_node+0x2d/0x120
[ 139.055301] ? vmemdup_user+0x2b/0xa0
[ 139.058584] __vfs_setxattr+0x121/0x170
[ 139.062617] ? __pfx___vfs_setxattr+0x10/0x10
[ 139.066282] __vfs_setxattr_noperm+0x97/0x300
[ 139.070061] __vfs_setxattr_locked+0x145/0x170
[ 139.073580] vfs_setxattr+0x137/0x2a0
[ 139.076641] ? __pfx_vfs_setxattr+0x10/0x10
[ 139.080223] ? __kasan_check_write+0x18/0x20
[ 139.084234] do_setxattr+0xce/0x150
[ 139.087768] setxattr+0x126/0x140
[ 139.091250] ? __pfx_setxattr+0x10/0x10
[ 139.094948] ? __virt_addr_valid+0xcb/0x140
[ 139.097838] ? __call_rcu_common.constprop.0+0x1c7/0x330
[ 139.102688] ? debug_smp_processor_id+0x1b/0x30
[ 139.105985] ? kasan_quarantine_put+0x5b/0x190
[ 139.109980] ? putname+0x84/0xa0
[ 139.113886] ? __kasan_slab_free+0x11e/0x1b0
[ 139.117961] ? putname+0x84/0xa0
[ 139.121316] ? preempt_count_sub+0x1c/0xd0
[ 139.124427] ? __mnt_want_write+0xae/0x100
[ 139.127836] ? mnt_want_write+0x8f/0x150
[ 139.130954] path_setxattr+0x164/0x180
[ 139.133998] ? __pfx_path_setxattr+0x10/0x10
[ 139.137853] ? __pfx_ksys_pwrite64+0x10/0x10
[ 139.141299] ? debug_smp_processor_id+0x1b/0x30
[ 139.145714] ? fpregs_assert_state_consistent+0x6b/0x80
[ 139.150796] __x64_sys_setxattr+0x71/0x90
[ 139.155407] do_syscall_64+0x3f/0x90
[ 139.159035] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[ 139.163843] RIP: 0033:0x7f108cae4469
[ 139.166481] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 088
[ 139.183764] RSP: 002b:00007fff87588388 EFLAGS: 00000286 ORIG_RAX: 00000000000000bc
[ 139.190657] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f108cae4469
[ 139.196586] RDX: 00007fff875883b0 RSI: 00007fff875883d1 RDI: 00007fff875883b6
[ 139.201716] RBP: 00007fff8758c530 R08: 0000000000000001 R09: 00007fff8758c618
[ 139.207940] R10: 0000000000000006 R11: 0000000000000286 R12: 00000000004004c0
[ 139.214007] R13: 00007fff8758c610 R14: 0000000000000000 R15
---truncated--- |
| Atcom 100M IP Phones firmware version 2.7.x.x contains an authenticated command injection vulnerability in the web configuration CGI script that allows attackers to execute arbitrary system commands. Attackers can inject shell commands through the 'cmd' parameter in web_cgi_main.cgi, enabling remote code execution with administrative credentials. |
| An issue in KIA Seltos vehicle instrument cluster with software and hardware v1.0 allows attackers to cause a Denial of Service (DoS) via ECU reset UDS service. NOTE: this is disputed by the Supplier because the findings came from a potentially unrealistic test environment (an isolated ECU part that was not in a vehicle), and because the ECUReset specification does not allow a manufacturer to require SecurityAccess and Authentication. |
| In RPyC before 6.0.0, when a server exposes a method that calls the attribute named __array__ for a client-provided netref (e.g., np.array(client_netref)), a remote attacker can craft a class that results in remote code execution. |
