| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dm-crypt: fix a tiny race condition in crypt_dec_pending
crypt_dec_pending reads io->error before calling atomic_dec_and_test.
Another context, for example crypt_endio called from an interrupt, may
set io->error and drop its reference between the read and the
decrement. crypt_dec_pending then drops the last reference and completes
the bio with the stale status - so a read that failed and was never
decrypted, or a write that failed, is reported as successful.
The read was placed before the decrement by commit b35f8caa0890 ("dm
crypt: wait for endio to complete before destruction"), because that
commit freed dm_crypt_io before calling bio_endio. This is no longer the
case, dm_crypt_io lives in the per-bio data now.
Read io->error after atomic_dec_and_test instead. atomic_dec_and_test is
fully ordered, so no additional barrier is needed. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix capability check in xfs
An user reported a bug where he managed to evade group's quota
by changing a file's gid to a different group id the same user
belonged to, even though quotas were enforced on both gids and the
file's size was big enough to exceed the quota's hardlimit.
Commit eba0549bc7d1 replaced a capable() call by a
has_capability_noaudit() to prevent unnecessary selinux audit messages.
Turns out that both calls have slightly different semantics even though
their documentation seems similar. Where in a nutshell:
capable() - Tests the task's effective credentials
has_ns_capability_noaudit() - Tests the task's real credentials
This most of the time has no practical difference but in some cases like
changing attrs (specifically group id in this case) through a NFS client
this will allow the quota code to use XFS_QMOPT_FORCE_RES, effectively
bypassing quota accounting checks.
Using instead ns_capable_noaudit() should fix this issue and prevent
selinux audit messages.
This also fix the remaining calls to has_capability_noaudit() |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: validate packet source for connected sockets
virtio_transport_recv_pkt() looks up sockets first by the full source and
destination tuple, then by destination only in the bound table. The
fallback is needed for listening and connecting sockets, but sockets remain
in the bound table after connect(), so it can also return a non-listening
socket.
The fallback does not validate the source address. In TCP_SYN_SENT, a
RESPONSE from an unrelated source can transition the victim socket to
TCP_ESTABLISHED while its stored remote address remains unchanged.
Subsequent RW packets from that source are delivered through the same
destination-only fallback.
This was reproduced with capability-empty processes under different UIDs.
The attacker discovered the target tuple through unprivileged AF_VSOCK
sock_diag and caused the victim socket to read 16 attacker-chosen bytes;
the intended peer-side socket read 0 of those 16 bytes.
Add vsock_check_source() to validate the transport, source port and source
CID against the peer stored in a non-listening socket. The local transport
is the CID exception because its packets are generated internally with
VMADDR_CID_LOCAL as their source, including connections using CID aliases.
Use the helper after lock_sock() in the virtio receive path. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mcast: don't truncate the port group walk on teardown
__br_multicast_disable_port_ctx() and br_multicast_del_port() walk
port->mglist with hlist_for_each_entry_safe(). However,
br_multicast_find_del_pg() can also delete other entries from the same
list through br_multicast_fwd_src_remove() or __fwd_del_star_excl().
If such an entry is the iterator's saved next node, hlist_del_init()
clears its ->next and terminates the walk early. The reproducer triggers
this in both teardown walks, leaving port groups in the bridge mdb with
a dangling ->key.port after del_nbp() frees the port:
BUG: KASAN: slab-use-after-free in __mdb_fill_info+0x1191/0x1320
__mdb_fill_info+0x1191/0x1320
br_mdb_dump+0x594/0xe40
rtnl_mdb_dump+0x1cf/0x5d0
Use hlist_del_init_rcu() to unlink the group while preserving ->next.
br_multicast_del_pg() and the teardown walks run under
br->multicast_lock. The GC worker must acquire the same lock before
detaching the group for destruction, so the node remains alive while
the walk uses the preserved pointer.
Preserving ->next means a walk can now reach a group that an earlier
iteration already deleted as a side effect. That group is off mp->ports,
so br_multicast_find_del_pg() would fall through its port scan and hit
the trailing WARN_ON(1). Skip such groups at the top of that helper: a
port group is put on port->mglist when it is created and only unlinked
when it is deleted, so hlist_unhashed() identifies exactly this case. |
| In the Linux kernel, the following vulnerability has been resolved:
net: psp: do not inherit the Rx association on clone
sk->psp_assoc sits past sk_dontcopy_end, so sock_copy() copies it into
every socket accepted from a listener without taking a reference, while
inet_sock_destruct() puts for every inet socket. psp_twsk_init() does
refcount_inc() for the timewait socket, so a child closing through
TIME_WAIT cancels its own put and leaves the association with one
reference and N timewait sockets holding the same pointer. Closing the
listener frees it, and the timewait timers then put freed memory.
Rejecting the association on a listening socket is not sufficient: a socket
can acquire one while established and then be turned back into a listener,
because tcp_disconnect() leaves sk->psp_assoc in place.
BUG: KASAN: slab-use-after-free in psp_twsk_assoc_free+0x6f/0xf0
Write of size 4 at addr ffff888110f9255c by task swapper/7/0
psp_twsk_assoc_free+0x6f/0xf0
inet_twsk_put+0xda/0x1b0
call_timer_fn+0x53/0x2e0
__run_timers+0x764/0xa80
Freed by task 99:
kfree+0x1a7/0x500
process_one_work+0x7ec/0x1100
An association carries a per-connection SPI and key, so a child must not
inherit the parent's. Clear it on clone. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_flower: validate mask pointer after nla_next()
fl_set_enc_opt() iterates the key's nested tunnel-option attributes
with nla_for_each_attr() while advancing a single mask pointer via
nla_next() at the bottom of each loop, so the mask cursor is driven
by the number of key attributes rather than by the mask's own
attributes. The nla_ok() added by commit c96adff956191 ("cls_flower:
call nla_ok() before nla_next()") only validates the mask pointer
that was just consumed; the pointer produced by nla_next() is used by
the next iteration (fl_set_geneve_opt() and siblings) without any
validation.
The mask's nested attributes are validated with NL_VALIDATE_LIBERAL,
which merely warns on trailing bytes that do not form a complete
attribute. A mask carrying one valid attribute plus 1-3 residue
bytes (or a non-aligned attribute length making msk_depth negative)
therefore reaches the next iteration with msk_depth != 0, so neither
the !msk_depth check in fl_set_enc_opt() nor the !depth check in the
per-type helpers fires. nla_type() then reads past the mask payload
and nla_parse_nested_deprecated() iterates with an nla_len taken
from those bytes, reading well beyond the mask attribute (KASAN:
slab-out-of-bounds read in __nla_validate_parse from fl_change()).
Validate the advanced mask pointer as well: when the mask is not
legitimately exhausted (msk_depth != 0) and the new pointer fails
nla_ok(), reject the filter with -EINVAL. An exactly exhausted mask
still skips the check, preserving exact-match behaviour for the
remaining key attributes. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix incorrect MFT record pointer passed to ntfs_attr_record_resize
ntfs_new_attr_flags() passes the wrong MFT record to ntfs_attr_record_resize().
When the attribute is in an extent record, ctx->mrec points to the extent
but the function receives the base record pointer m, causing incorrect
size calculations in memmove.
Fix by passing ctx->mrec (the actual MFT record containing the attribute)
instead of m (the base MFT record) to ntfs_attr_record_resize(). |
| In the Linux kernel, the following vulnerability has been resolved:
x86/CPU/AMD: Fix AMD TLBI Erratum #1718
The processor may fail to invalidate a TLB entry while executing an
INVLPGB/TLBSYNC instruction pair.
Detect the erratum and apply a software workaround when a microcode fix
is not present. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: fix TX descriptor bounds check
btintel_pcie_prepare_tx() uses tfd_index to access the TFD and data
buffer arrays before the index is advanced modulo txq->count. An index
equal to txq->count is one past the end of both arrays, so reject it in
the bounds check. |
| The All in One SEO – AI SEO Plugin to Boost SEO Rankings & Traffic (Schema, Local SEO, Sitemap & SEO Insights) plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 5.0.3 via the 's' parameter. This makes it possible for unauthenticated attackers to extract arbitrary non-public post meta values, including sensitive custom fields such as API keys and internal notes, emitted verbatim into the HTML title element and JSON-LD SearchResultsPage schema. |
| The WP Directory Kit plugin for WordPress is vulnerable to generic SQL Injection via the 'idfield' parameter in all versions up to, and including, 1.6.0 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| A flaw was found in luksmeta. A local attacker with administrative privileges can cause data corruption when saving metadata to a Linux Unified Key Setup (LUKS) device. Due to incorrect boundary calculations and flawed overlap detection, new metadata entries can be written beyond available free space or over existing records. This issue can corrupt stored encrypted payload data or existing metadata, potentially rendering the affected data inaccessible. |
| A flaw was found in cifs-utils. This flaw allows an unprivileged local user to achieve privilege escalation. When a privileged service mounts a Common Internet File System (CIFS) share using a user-controlled credentials file, input values are not properly sanitized before being assembled into mount options. A local attacker can exploit this vulnerability to inject unauthorized mount options, allowing them to bypass permission checks and execute files with administrative (root) privileges. |
| A flaw was found in SSSD. A local attacker can exploit this vulnerability by sending a specially crafted request to the autofs responder UNIX socket. Due to improper buffer offset calculation during request parsing, the service performs an out-of-bounds memory read. This flaw can cause the autofs responder process to crash, resulting in a denial of service (DoS). |
| A flaw was found in SSSD. When configured with the Entra ID identity provider, input lookup names containing single quotes are not properly escaped before being included in Microsoft Graph Open Data Protocol (OData) queries. A low-privileged local user can exploit this flaw by submitting a crafted search request, altering query filters to broaden user or group searches. This can lead to information disclosure by retrieving unintended directory objects, as well as a Denial of Service (DoS) through excessive processing and cache population. |
| A flaw was found in SSSD. When configured to use Microsoft Entra ID, search inputs are not properly sanitized before being incorporated into directory query filters. A local user can exploit this vulnerability by submitting a crafted lookup request, manipulating the query logic to cause unauthorized information disclosure from the directory. |
| A flaw was found in SSSD. An unprivileged local user can repeatedly request lookups for nonexistent entries through the Name Service Switch (NSS) responder. Because the negative cache does not limit the total number of stored entries and only removes expired records when an existing key is rechecked, the cache can grow without bound. This behavior can lead to memory exhaustion, resulting in a Denial of Service (DoS) as the responder becomes unresponsive or terminates. |
| The WP Booking System - Booking Calendar plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the wpbs_action_ajax_calendar_remove_note() function in versions up to, and including, 2.1.0.5 This makes it possible for authenticated attackers, with Subscriber-level access and above, to delete arbitrary calendar notes belonging to any calendar. |
| The PDF Invoices & Packing Slips for WooCommerce plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 5.16.5 via the 'invoice_number (via document filename)' parameter. This makes it possible for unauthenticated attackers to extract another customer's complete invoice PDF — including billing identity, shipping address, private order notes, line items, prices, dates, order ID, and invoice number — delivered directly to the attacker's email as an order confirmation attachment. Exploitation requires the plugin's yearly invoice number reset option to be enabled, and the attacker's guest-checkout order must trigger a processing email within 60 seconds of a victim order that shares the same yearly-reset invoice number. |
| The Redux Framework plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 4.5.15. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with subscriber-level access and above, to view the entire Redux options payload — including plaintext password field values, API keys, license keys, and SMTP credentials — exposed in the inline redux_<opt_name> JavaScript block on wp-admin/profile.php. The Users extension is loaded automatically for every Redux instance registered by any installed theme or plugin, meaning any site running Redux Framework is affected regardless of whether the developer explicitly configured the Users extension. |
