| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Inclusion of functionality from an untrusted control sphere in the Kiro Powers feature in Amazon Kiro IDE before version 0.8.135 might allow remote unauthenticated actors to obtain sensitive information from a developer workstation. Crafted repository content can cause the agent to modify the workspace settings file, which redirects the Kiro Powers registry request to an actor controlled endpoint and sends workspace data to that endpoint when the Powers panel is opened.
To remediate this issue, users should upgrade to Kiro IDE version 0.8.135 or later. Users who opened a project in an earlier version should also rotate any credentials that were present in that project. |
| A flaw was found in `multipathd`. A local attacker with access to the `multipathd` UNIX control socket can exploit this vulnerability by sending valid commands and then ceasing to read replies. This action can cause the `multipathd` listener thread to block, leading to a Denial of Service (DoS) where legitimate Inter-Process Communication (IPC) operations may hang or time out. This issue does not result in privilege escalation, arbitrary code execution, or impact data confidentiality or integrity. |
| MoguBlog through 6.2 exposes Elasticsearch index management endpoints in the mogu_search service without authentication, allowing remote attackers to delete, recreate, or alter the blog search index. Attackers can invoke POST endpoints to wipe the entire search index, delete specific documents, or inject malicious index entries, causing search functionality to return incorrect or no results. |
| AVideo through commit c3edcc274c389816d434acadac07ee78eaf330c1 contains a stored cross-site scripting vulnerability in the Bookmark plugin where chapter names are not encoded before being concatenated into public watch-page HTML. A video owner can inject malicious scripts via the bookmark name parameter, and every visitor of that video executes the payload in the AVideo origin. |
| WWBN AVideo through commit c3edcc274c389816d434acadac07ee78eaf330c1 contains a reflected cross-site scripting vulnerability in confirmLivePassword.php that copies REQUEST_URI into a form action attribute without encoding. Attackers can craft a malicious URL with a quote character to break out of the action attribute and inject event handlers that execute in the victim's browser within the site origin. |
| Forgejo before 16.0.4 allows use of restricted API tokens for unintended access to the "allow maintainer edit" feature. |
| An unrecovered panic in the event stream header decoder in Amazon AWS SDK for Go v2 before release-2026-03-23 might allow an unauthenticated remote actor to terminate the consuming application process via a crafted event stream response frame containing a header value type outside the valid range.
To remediate this issue, users should upgrade to release-2026-03-23 or later, and patch any forked or derivative code. |
| The ANJIA AJL33PC0801 IP camera uses a hard-coded credential for bootloader authentication. An attacker with physical access to the device may leverage this weakness to gain privileged bootloader access, allowing unauthorized modification of firmware and system configuration and potentially resulting in complete device compromise. |
| CWE-522: Insufficiently Protected Credentials vulnerability that could result in exposure of authentication information and unauthorized access to RTU functionality. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: think-lmi: Free system certificate signatures
Multi-certificate support also allows the system authentication object
to store ->signature and ->save_signature, which leak when the driver is
removed. Free the signatures to avoid leaking memory. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: hp-bioscfg: fix heap OOB read in sk_store() and kek_store()
sk_store() and kek_store() strip a trailing newline from the sysfs
write before allocating the key buffer:
length = count;
if (buf[length - 1] == '\n')
length--;
bioscfg_drv.spm_data.signing_key = kmemdup(buf, length, GFP_KERNEL);
but then pass the original "count" (not "length") as the copy size to
hp_wmi_perform_query(), which memcpy()s that many bytes out of the
"length"-sized allocation, reading one byte past it whenever the write
ends in a newline, the normal case for a shell "echo" into sysfs.
KASAN confirms this directly:
BUG: KASAN: slab-out-of-bounds in hp_wmi_perform_query+0x1e9/0x460 [hp_bioscfg]
Read of size 28 at addr ffff88813c8e2b80 by task python3/16022
...
sk_store+0xa7/0x240 [hp_bioscfg]
kernfs_fop_write_iter+0x3e1/0x5d0
...
The buggy address is located 0 bytes inside of
allocated 27-byte region [ffff88813c8e2b80, ffff88813c8e2b9b)
Reproduced identically for kek_store, and at multiple write sizes
(28, 57, 201 bytes), each time reading exactly one byte past a
kmemdup() allocation one byte smaller than the write.
Fix by passing "length" instead of "count" to hp_wmi_perform_query()
in both functions. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: hp-bioscfg: fix heap OOB read on empty password write
validate_password_input() computes length = strlen(buf) and then
checks buf[length - 1] to strip a trailing newline, without checking
that length is nonzero first. Writing an empty string (a bare '\n')
to current_password or new_password gives length == 0, and
buf[length - 1] reads buf[-1], one byte before the heap allocation
holding the copied input.
KASAN confirms this directly:
BUG: KASAN: slab-out-of-bounds in store_password_instance.constprop.0+0x223/0x2a0 [hp_bioscfg]
Read of size 1 at addr ffff88811bd8da9f by task sh/13740
...
store_password_instance.constprop.0+0x223/0x2a0 [hp_bioscfg]
current_password_store+0x14/0x20 [hp_bioscfg]
...
The buggy address is located 23 bytes to the right of
allocated 8-byte region [ffff88811bd8da80, ffff88811bd8da88)
Reproduced identically via new_password_store. Execution continues
past the bad read (the garbage byte only affects whether "length" is
decremented by one), so the write completes and returns success; this
is a pure information read past the buffer, not a crash, but it is
still an out-of-bounds access KASAN correctly flags.
Fix by only checking buf[length - 1] when length is nonzero. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/query: cap user size passed to copy_struct_to_user
io_handle_query_entry() clamps hdr.size for the inbound copy_from_user()
but keeps the original user value as usize. copy_struct_to_user() uses
that usize and, when it is larger than the kernel result, clear_user()s
the trailing bytes.
As hdr.size is a __u32, a query can request nearly 4 GiB of zeroing,
including on the error path where res_size stays 0. The interface is
reachable without a ring via IORING_REGISTER_QUERY.
Reject sizes larger than PAGE_SIZE, as recommended for copy_struct_*
interfaces. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: realtek: use gpiod_set_value_cansleep for reset GPIO
rtl83xx_reset_assert() and rtl83xx_reset_deassert() are only called from
the probe path, which may sleep and is not timing-critical. When the
reset GPIO is provided by a sleeping controller such as an I2C I/O
expander, gpiod_set_value() warns:
WARNING: drivers/gpio/gpiolib.c:4030 at gpiod_set_value+0x44/0x80, CPU#1: kworker/u16:4/61
Hardware name: B&O MAP CA33 Rev f (UNKNOWN) (DT)
Workqueue: events_unbound deferred_probe_work_func
pc : gpiod_set_value+0x44/0x80
lr : rtl83xx_probe+0x1d8/0x3a0
Call trace:
gpiod_set_value+0x44/0x80 (P)
rtl83xx_probe+0x1d8/0x3a0
realtek_mdio_probe+0x24/0xa0
mdio_probe+0x38/0x78
really_probe+0xc4/0x3e0
__driver_probe_device+0x15c/0x1b8
driver_probe_device+0xb4/0x120
__device_attach_driver+0xb8/0x1a0
bus_for_each_drv+0x88/0xf0
__device_attach+0xa0/0x1d8
device_initial_probe+0x54/0x68
bus_probe_device+0x38/0xa0
deferred_probe_work_func+0xb8/0x120
process_one_work+0x184/0x4e8
worker_thread+0x188/0x308
kthread+0x130/0x150
ret_from_fork+0x10/0x20
Switch both helpers to gpiod_set_value_cansleep() so such a reset GPIO can
be used without triggering the warning.
The reset GPIO has been driven with the non-sleeping gpiod_set_value()
since the driver was added in v4.19. The call has since been refactored
across several files - from realtek-smi.c / realtek-mdio.c into the common
rtl83xx.c module and then into the rtl83xx_reset_assert() and
rtl83xx_reset_deassert() helpers (both in v6.9). This patch therefore
applies as-is only to kernels that carry those helpers (v6.9+); older
stable kernels need the same gpiod_set_value_cansleep() conversion at the
corresponding open-coded call sites. |
| In the Linux kernel, the following vulnerability has been resolved:
net: l2tp: do not propagate multicast notification errors
The tunnel create, tunnel modify, session create, and session modify
netlink handlers send multicast notifications through helpers that can fail
while allocating or encoding a message, or while multicasting it.
For tunnel and session create/modify, a notification is sent after the live
operation has completed. Returning a best-effort notification error as the
command result can therefore report failure for an operation that already
committed and can cause callers to retry and accumulate live objects.
Keep sending notifications for listener visibility, but do not propagate
their best-effort status as the command result. This also keeps the tunnel
modify command consistent with the other notification-only paths. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phylink: correctly validate returned PCS in phylink_inband_caps
In phylink_inband_caps(), the PCS returned by mac_select_pcs is only
checked if NULL but mac_select_pcs can also return an error pointer.
This can cause a kernel panic as phylink_pcs_inband_caps() only checks
if passed PCS is not NULL and directly dereference ops from the phylink_pcs
struct.
Use the IS_ERR_OR_NULL macro to address both case where the returned
PCS can be NULL or an error pointer and prevent a kernel panic. |
| In the Linux kernel, the following vulnerability has been resolved:
net: thunderbolt: Release the Rx HopID that was handed out on mismatch
tb_xdomain_alloc_in_hopid() passes the wanted HopID to ida_alloc_range()
as the lower bound, so a taken id is not an error there: the allocator
returns the next free one above it. tbnet_connected_work() asks for the
peer's transmit path, treats any other id as a failure and returns
without releasing what it got, so that allocation stays live for the rest
of the XDomain connection with nothing left holding a reference to it.
Release the id when it is not the one we asked for, the same way the
error unwind at the end of the function releases the expected one. |
| In the Linux kernel, the following vulnerability has been resolved:
NTB: ntb_transport: Fail TX enqueue when the QP link is down
Commit f195a1a6fe41 ("ntb: Drop packets when qp link is down") meant to
make ntb_transport_tx_enqueue() drop packets submitted while the QP link
is down, but it only returns 0 without consuming the packet. Zero means
success by this function's contract, so ntb_netdev reports NETDEV_TX_OK
and forgets the skb: nothing queued it, nothing frees it, and it leaks,
one skb for every transmit racing a link-down.
Return -ENOLINK instead, restoring the contract that a non-zero return
leaves the buffer owned by the caller. With the preceding patch,
ntb_netdev frees the skb on non-retryable enqueue failures and returns
NETDEV_TX_OK, so a packet racing with link-down is dropped without leaking
or entering a busy retry loop. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: do not dereference an unset send buffer on the SMC-D teardown path
smc_close_stream_wait() calls smc_tx_prepared_sends() from inside its
sk_wait_event() condition, and sk_wait_event() evaluates that condition
once with the socket lock released. smcd_buf_detach() clears
conn->sndbuf_desc from smc_conn_kill() under lock_sock(), so a link group
terminating while a socket waits there leaves the helper dereferencing
NULL, faulting out of close(). SIOCOUTQ reads the field by hand, and
smc_close_cancel_work() drops the lock across two cancel_*_sync() calls.
Sample the pointer once in the helper, report nothing prepared while it is
unset, and bound the ioctl the same way. The receive tasklet dereferences
the field directly in smc_cdc_msg_recv_action(), not through this helper;
1/2 is what keeps it from running that late. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix socket refcount leak in smc_switch_conns()
smc_switch_conns() takes a reference on the SMC socket before dropping
lgr->conns_lock, so the connection stays alive while the CDC slot is
fetched:
sock_hold(&smc->sk);
read_unlock_bh(&lgr->conns_lock);
/* pre-fetch buffer outside of send_lock, might sleep */
rc = smc_cdc_get_free_slot(conn, to_lnk, &wr_buf, NULL, &pend);
if (rc)
goto err_out;
The err_out label only drops the wr_tx link reference, so this early exit
returns without the matching sock_put(). The second error exit is not
affected, because sock_put() has already run by then.
A leaked sk_refcnt means the smc_sock is never destroyed. Its send and
receive buffers stay allocated, and for a user socket the reference held
on the network namespace is never released, so the netns can no longer be
torn down.
smc_cdc_get_free_slot() fails when the target link goes down or when the
connection has been killed while the switch is in progress. Both are
reachable during the link failover this function implements, so the leak
is triggered by the same hardware events that make smc_switch_conns() run
in the first place.
Restructure so there is a single sock_put() covering both outcomes,
instead of adding a second one to the error path. |
