| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Input Validation vulnerability in Apache Camel AWS2-SQS Component.
The camel-aws2-sqs component map inbound message attributes into the Camel Exchange through a component-specific HeaderFilterStrategy. Sqs2HeaderFilterStrategy configured only an outbound filter (setOutFilterPattern, which blocks Camel*, breadcrumbId and org.apache.camel.* headers being written to the broker) but did not configure an inbound filter. As a result, when Sqs2Consumer copies each SQS MessageAttribute into the Exchange via HeaderFilterStrategy.applyFilterToExternalHeaders, DefaultHeaderFilterStrategy applied no inbound rule and treated every header name as not filtered - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelSqlQuery - copying them unmodified onto the Camel message. Any principal able to send messages to the consumed SQS queue (for example a cross-account sender or a lower-privileged in-account component holding sqs:SendMessage) could therefore set arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a query); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix adds an inbound HeaderFilterStrategy rule to Sqs2HeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so sender-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and restrict who may send to the consumed SQS queue by applying least-privilege sqs:SendMessage permissions on the queue resource policy. |
| OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Starting in version 4.5.0 and prior to version 4.11.0, the RSA PKCS#1 v1.5 decryption implementation in the Hisilicon HPRE crypto driver uses non-constant-time `memcmp()` for label hash verification and has multiple distinguishable error paths. This creates a Bleichenbacher-style padding oracle that allows an attacker to recover RSA PKCS#1 v1.5 plaintext. Version 4.11.0 contains a patch. As a workaround, disable Hisilicon HPRE RSA driver with `CFG_HISILICON_ACC_V3=n`. |
| Deserialization of Untrusted Data vulnerability in Apache Camel PQC Component.
The camel-pqc component persists post-quantum key metadata (KeyMetadata) through pluggable KeyLifecycleManager implementations. AwsSecretsManagerKeyLifecycleManager.deserializeMetadata() reads that metadata back from the configured AWS Secrets Manager secret by Base64-decoding the stored value and deserializing it with a raw java.io.ObjectInputStream.readObject() and no ObjectInputFilter or class allow-list; the cast to KeyMetadata happens only after readObject() returns, so any readObject() side effects in a crafted object run before the type check. A principal who can write to the AWS Secrets Manager secret that holds this metadata (requiring secretsmanager:PutSecretValue on that secret) could store a crafted serialized object that is deserialized during normal key-lifecycle operations, potentially leading to code execution in the context of the application that manages the keys. This is the same underlying defect, in the same code path and remediated by the same fix, as CVE-2026-46590, which was reported independently and additionally covers the HashiCorp Vault and file-based sibling managers; both are incomplete-remediation follow-ons to CVE-2026-40048 (CAMEL-23200).
This issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, restrict write access to the AWS Secrets Manager secret that holds the camel-pqc key metadata so that only the application’s own identity holds secretsmanager:PutSecretValue on it (least-privilege IAM), and keep the PQC key material in a secret separate from any data that less-trusted principals can write. |
| Improper Input Validation vulnerability in Apache Camel NATS component.
The camel-nats component maps inbound NATS message headers into the Camel Exchange but defaulted its headerFilterStrategy to a bare new DefaultHeaderFilterStrategy() with no inbound rules configured (NatsConfiguration). With no inFilter, inFilterPattern or inFilterStartsWith set, DefaultHeaderFilterStrategy.applyFilterToExternalHeaders returns not filtered for every header name, so NatsConsumer copies every NATS message header - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelSqlQuery - unmodified onto the Camel message. A client able to publish to the consumed NATS subject can therefore inject arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a query); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses. NATS message headers require NATS 2.2 or later, and the issue is reachable without credentials when the NATS server is configured without authentication (the NATS server default).
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes camel-nats default to a dedicated NatsHeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so client-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound NATS messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and enable authentication on the NATS server so that only trusted clients can publish to the consumed subject. |
| Apache Airflow's Google provider operators `GCSToSFTPOperator` and `GCSTimeSpanFileTransformOperator` joined GCS object names returned by the bucket listing API directly to a destination filesystem path without normalisation or containment check. A user with write access to the source GCS bucket (typically a different trust principal than the DAG author — partner uploads, ingest-only service accounts, public-data buckets) could create an object whose name contains `..` segments and cause the DAG run to write the downloaded blob outside the configured destination (the SFTP `destination_path` for `GCSToSFTPOperator`; the worker-local temp directory for `GCSTimeSpanFileTransformOperator`), enabling overwrite of arbitrary files on the SFTP server or the worker host. Affects deployments that ingest from buckets writable by less-trusted principals. Users are advised to upgrade to `apache-airflow-providers-google` 22.2.1 or later. |
| Imager versions before 1.032 for Perl have a heap out-of-bounds read in the bundled Imager::File::SGI reader via a 16-bit RLE literal run in read_rgb_16_rle.
read_rgb_16_rle guards each literal run with if (count > data_left), but count is a pixel count while every 16-bit sample consumes two bytes. The copy loop reads inp[0] * 256 + inp[1] and advances two bytes per pixel, so a run with data_left / 2 < count <= data_left passes the guard yet consumes 2 * count bytes and reads past the end of the buffer. The 8-bit path is unaffected because there one pixel is one byte.
Reading a crafted SGI image through Imager->read triggers the over-read before the parser rejects the malformed image, which can crash the process. |
| Pillow is a Python imaging library. Prior to 12.3.0, PIL/GdImageFile.py GdImageFile._open() read image dimensions from the GD 2.x header and stored them in self._size without calling Image._decompression_bomb_check(), allowing a crafted .gd file to trigger excessive C-heap allocation when loaded. This issue is fixed in version 12.3.0. |
| Improper enforcement of a mandatory multi-factor authentication policy in Devolutions Server 2026.2.9.0 allows an attacker with valid user credentials to bypass the MFA Required policy and authenticate without completing multi-factor authentication. The problem occurs when DVLS encounters an invalid default MFA value. |
| Improper Neutralization of Special Elements in Data Query Logic vulnerability in Apache Camel Neo4J component.
The camel-neo4j producer builds the Cypher WHERE clause for its match/retrieve and delete operations from the CamelNeo4jMatchProperties map. CVE-2025-66169 addressed Cypher injection through the property values by binding them as query parameters ($paramN), but the property names (the JSON keys of that map) were still concatenated into the query string verbatim in Neo4jProducer.retrieveNodes() and deleteNode(). A property name containing Cypher syntax therefore alters the structure of the executed query. Where a route maps untrusted input into the CamelNeo4jMatchProperties map - for example by passing a request body as the match map, or from a consumer that does not filter inbound Camel* headers - an attacker who controls the JSON key names can inject arbitrary Cypher and read, modify or delete any node or relationship in the Neo4j database. The CamelNeo4jMatchProperties header is itself Camel-prefixed and is filtered by the HTTP header-filter strategy, so a plain HTTP client cannot set it directly; the issue is reachable through routes that deliberately or inadvertently carry untrusted data into that header.
This issue affects Apache Camel: from 4.10.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, do not populate the CamelNeo4jMatchProperties map from untrusted input: validate or allow-list the property names (for example against ^[A-Za-z_][A-Za-z0-9_]*$) before the Neo4j producer, and ensure that any consumer feeding such a route filters inbound Camel* / camel* headers so the match header cannot be supplied by an external sender. |
| Improper Input Validation, Unintended Proxy or Intermediary ('Confused Deputy') vulnerability in Apache Camel CXF SOAP component.
The camel-cxf producer selects which SOAP operation to invoke on the backend service from the operationName (and operationNamespace) Exchange header, whose constant values (CxfConstants.OPERATION_NAME / OPERATION_NAMESPACE) were the plain strings operationName / operationNamespace. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a cxf: producer, any HTTP client could therefore set the operationName header and have CxfProducer resolve and invoke a different WSDL operation than the route intended - for example replacing a read operation with a destructive one - against the backend SOAP service (a confused-deputy redirection). The constant is defined in the shared camel-cxf-common module, so the same non-prefixed names also applied to camel-cxfrs. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the operation-selection headers are named CamelCxfOperationName / CamelCxfOperationNamespace and are filtered at transport boundaries; see the 4.21 upgrade guide for the cross-transport carrier-header pattern. For deployments that cannot upgrade immediately, do not select the CXF operation from untrusted input: strip the operationName and operationNamespace headers from any untrusted ingress before the cxf: producer and set the operation from a trusted source in the route. |
| Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection'), Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel Solr component.
The camel-solr producer copies Exchange message headers whose names begin with the SolrParam. prefix into the parameters of the Solr request, and headers whose names begin with the SolrField. prefix into the fields of the indexed Solr document. The prefix constants (SolrConstants.HEADER_PARAM_PREFIX / HEADER_FIELD_PREFIX) were the plain strings SolrParam. / SolrField.. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a solr: producer, any HTTP client could therefore set SolrParam.* headers to inject arbitrary Solr request parameters - including shards or stream.url, which cause the Solr server to issue server-side requests to an attacker-chosen URL (server-side request forgery, for example to an internal service or a cloud metadata endpoint), or qt to reach administrative request handlers - and set SolrField.* headers to inject arbitrary fields into indexed documents. No credentials are required when the bridging consumer is unauthenticated.
This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Solr parameters or fields via the raw header prefixes must use CamelSolrParam. / CamelSolrField. instead of SolrParam. / SolrField.. For deployments that cannot upgrade immediately, strip the SolrParam.* and SolrField.* headers from any untrusted ingress before the solr: producer, and set the required Solr parameters and fields from a trusted source in the route. |
| Pillow is a Python imaging library. Prior to 12.3.0, PIL/BdfFontFile.py bdf_char() read the BBX width and height field from a BDF font file and passed attacker-controlled dimensions to Image.new() without calling Image._decompression_bomb_check(), bypassing Pillow's documented decompression bomb protection and allowing excessive memory allocation. This issue is fixed in version 12.3.0. |
| Successfully using libcurl to do a transfer to a specific HTTP origin
(`hostA`) with **Digest** authentication and then changing the origin to a
different one (`hostB`) for a second transfer, reusing the same handle, makes
libcurl wrongly pass on the `Authorization:` header field meant for `hostA`,
to `hostB`. |
| When a user invokes curl using a schemeless URL combined with
`--proto-default` sftp (or scp), a disconnect occurs between the tool layer
and libcurl. The tool layer incorrectly infers the URL scheme, which
erroneously bypasses the initialization of critical SSH security options like
CURLOPT_SSH_HOST_PUBLIC_KEY_SHA256 and CURLOPT_SSH_KNOWNHOSTS. Conversely, the
libcurl runtime successfully honors CURLOPT_DEFAULT_PROTOCOL and establishes
the connection via SFTP/SCP as specified. Because the tool layer skipped the
security configuration, these SSH host verification options are silently
omitted, causing curl to connect to an unverified SSH remote host without
throwing an error. |
| The curl logic that works with SASL authentication could end up cleaning up
the GSASL context *twice* without clearing the pointer in between, making it
`free()` the same pointer twice. |
| When asking curl to use a `.netrc` file to find credentials and at the same
time specifying a URL with a username(without a password), like
`https://user@example.com/`, curl could wrongly get and use the password for
*another* user set in the `.netrc` file for that host if such a one exists and
there is no match for the specified user. |
| Dell Client Platform BIOS contains an Authentication Bypass by Primary Weakness vulnerability. An unauthenticated attacker with physical access could potentially exploit this vulnerability, leading to Information Disclosure. |
| In Eclipse Theia since version 1.26.0, the backend /services/request-service RPC accepts an attacker-controlled URL from any client connected to the standard /services messaging endpoint, performs the HTTP request server-side, and returns the full response body to the caller.
Because the destination URL is neither validated nor allowlisted, a remote attacker with access to the Theia service connection can issue server-side HTTP requests to localhost or other backend-reachable hosts and read their responses, exposing internal administrative endpoints, cloud instance metadata services, and other resources that are intentionally outside the browser network boundary.
The vulnerability affects deployments where the Theia service connection is reachable by untrusted users (for example, multi-tenant or publicly-reachable Theia deployments). |
| Authentication Bypass by Spoofing vulnerability in Apache IoTDB.
Certain Thrift RPC query handlers lack strict validation of the sessionId
parameter. An attacker can construct requests with a forged sessionId and,
without performing openSession authentication, receive valid query results.
This allows authentication bypass and unauthorized reading of time-series
data.
This issue affects Apache IoTDB: from 1.3.3 before 2.0.8.
Users are recommended to upgrade to version 2.0.8, which fixes the issue. |
| Deserialization of Untrusted Data vulnerability in Apache Camel, Apache Camel JMS component.
JmsBinding.extractBodyFromJms() in camel-jms - and the equivalent JmsBinding in camel-sjms - deserializes the payload of an incoming JMS ObjectMessage via jakarta.jms.ObjectMessage.getObject() whenever the mapJmsMessage option is enabled (the default) and Camel acts as a JMS consumer. The CVE-2026-40860 hardening added a post-deserialization class check that rejects classes outside the default allow-list java.**;javax.**;org.apache.camel.**;!*. However org.apache.camel.support.DefaultExchangeHolder itself lives in the allow-listed org.apache.camel.** namespace, so an ObjectMessage whose top-level object is a DefaultExchangeHolder passes the check. The receiving side then calls DefaultExchangeHolder.unmarshal() on it without requiring the transferExchange option to be enabled - an asymmetric trust boundary, since the sending side gates ObjectMessage and transferExchange handling but the receiving side did not - writing every non-null field of the holder into the Exchange: the message body, the IN and OUT headers, the exchange properties, the variables, the exchange id and the exception. An attacker who can publish an ObjectMessage to a queue or topic consumed by an affected Camel application can therefore inject arbitrary Exchange state using only universally-trusted java.lang and java.util types, with no deserialization gadget chain required, to manipulate routing and headers, exchange properties and error handling. The same handling applies to camel-sjms and camel-sjms2, and to the JMS-family components built on JmsComponent and JmsBinding: camel-amqp, camel-activemq and camel-activemq6. This is a bypass of the CVE-2026-40860 fix rather than a flaw in it.
This issue affects Apache Camel: from 3.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0; Apache Camel: from 3.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.
Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, JMS ObjectMessage handling is disabled by default in camel-jms, camel-sjms and the JMS-family components (a new objectMessageEnabled option defaults to false at the component and endpoint level), so an incoming ObjectMessage - including a DefaultExchangeHolder payload - is no longer deserialized unless the option is explicitly enabled; only set objectMessageEnabled=true when the consumed JMS destination is fed exclusively by trusted producers. For deployments that cannot upgrade immediately, restrict publish access to the queues and topics consumed by Camel to trusted producers via JMS broker authorization, and do not expose JMS consumers that map ObjectMessage bodies to untrusted networks; a JMS-provider deserialization allow-list does not mitigate this specific bypass because the crafted payload uses only universally-trusted classes. |
