| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ad_sigma_delta: fix clear_pending_event for registerless devices
ad_sigma_delta_clear_pending_event() falls through to the status register
read path for devices with has_registers = false and no rdy_gpiod. For
such devices, ad_sd_read_reg() skips the address byte entirely and clocks
raw MISO bytes with no address phase — making it byte-for-byte identical
to reading conversion data. If a pending conversion result is present,
this partially consumes it and corrupts the data stream for the subsequent
ad_sd_read_reg() call in ad_sigma_delta_single_conversion().
Furthermore, with num_resetclks = 0 on these devices, data_read_len
evaluates to 0. If the clocked byte has bit 7 clear, pending_event is set
and the code attempts memset(data + 2, 0xff, 0 - 1), overflowing to
SIZE_MAX and corrupting the heap.
Fix by returning 0 immediately when neither rdy_gpiod nor has_registers
is set. This is safe for all current registerless devices: ad7191 and
ad7780 (with powerdown GPIO) are reset between conversions by CS
deassertion, so there is no stale result to drain; ad7780 (without
powerdown GPIO) and max11205 are continuously-converting and cycle ~DRDY
at the output data rate regardless of whether the previous result was
read, so the next falling edge fires naturally.
A future registerless device that holds ~DRDY asserted until data is read
would be broken by this early return and would require either
num_resetclks set or a rdy-gpio.
The same heap corruption is reachable on any device with rdy_gpiod set
but num_resetclks = 0: if the GPIO indicates a pending event, the drain
path executes memset(data + 2, 0xff, 0 - 1) regardless of has_registers.
Add an explicit data_read_len == 0 guard after the pending event check;
the stale result is then consumed by the first ad_sd_read_reg() call in
ad_sigma_delta_single_conversion(). |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: NFIT: core: Fix acpi_nfit_init() error cleanup
If acpi_nfit_init() fails after adding the acpi_desc object to the
acpi_descs list, that object is never removed from that list because
the acpi_nfit_shutdown() devm action is not added for the NFIT device
in that case. Next, the acpi_nfit_init() failure causes
acpi_nfit_probe() to fail, the acpi_desc object is freed, and a
dangling pointer is left behind in the acpi_descs. Any subsequent
ACPI Machine Check Exception will trigger nfit_handle_mce() which
iterates over acpi_descs and so a use-after-free will occur.
Moreover, if acpi_nfit_probe() returns 0 after installing a notify
handler for the NFIT device and without allocating the acpi_desc
object and setting the NFIT device's driver data pointer, the
acpi_desc object will be allocated by acpi_nfit_update_notify()
and acpi_nfit_init() will be called to initialize it. Regardless
of whether or not acpi_nfit_init() fails in that case, the
acpi_nfit_shutdown() devm action is not added for the NFIT device
and acpi_desc is never removed from the acpi_descs list. If the
acpi_desc object is freed subsequently on driver removal, any
subsequent ACPI MCE will lead to a use-after-free like in the
previous case.
To address the first issue mentioned above, make acpi_nfit_probe()
call acpi_nfit_shutdown() directly on acpi_nfit_init() failures and
to address the other one, add a remove callback to the driver and
make it call acpi_nfit_shutdown(). Also, since it is now possible to
pass NULL to acpi_nfit_shutdown() or the acpi_desc object passed to it
may not have been initialized, add checks against NULL for acpi_desc and
its nvdimm_bus field to that function and make acpi_nfit_unregister()
clear the latter after unregistering the NVDIMM bus. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_ffa: Bound PARTITION_INFO_GET_REGS copies
The register-based PARTITION_INFO_GET path trusted the firmware-provided
indices when copying partition descriptors into the caller buffer.
Reject inconsistent counts or index progressions so the copy loop cannot
write past the allocated array.
(fixed cur_idx when exactly one descriptor in the first fragment) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/hyperv: validate resolution_count and fix WIN8 fallback
A SYNTHVID_RESOLUTION_RESPONSE with resolution_count > 64 walks past
the supported_resolution[SYNTHVID_MAX_RESOLUTION_COUNT] array in the
parse loop. Bound resolution_count against the array size, folded
into the existing zero-check.
When the WIN10 resolution probe fails, the caller in
hyperv_connect_vsp() left hv->screen_*_max / preferred_* unpopulated,
which sets mode_config.max_width / max_height to 0 and makes
drm_internal_framebuffer_create() reject every userspace framebuffer
with -EINVAL. The pre-WIN10 branch had the same gap for
preferred_width / preferred_height. Use a single post-probe fallback
guarded by screen_width_max == 0 so both paths converge on the WIN8
defaults. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: bound NTFS_DE view.data_off in UpdateRecordData{Root,Allocation}
In do_action()'s UpdateRecordDataRoot (fslog.c:3489) and
UpdateRecordDataAllocation (fslog.c:3697) cases, the memmove
destination is `Add2Ptr(e, le16_to_cpu(e->view.data_off))`,
where e->view.data_off comes from an on-disk NTFS_DE inside
an INDEX_ROOT or INDEX_BUFFER. Neither case validates
view.data_off + dlen against e->size; the existing
check_if_index_root / check_if_alloc_index helpers walk the
entry chain and validate the entry's offset, but not its
internal view fields.
The neighbouring read sites (e.g., fs/ntfs3/index.c when
iterating view entries) check view.data_off + view.data_size
<= e->size. Apply the same bound at the two memmove sites.
Reproduced under UML+KASAN on mainline 8d90b09e6741 via
pr_warn-only probe instrumentation: with view.data_off forced
to 0xFFFC, the memmove writes 32 bytes past the end of the
NTFS_DE.
This is similar in shape to Pavitra Jha's 2026-05-02 patch
"fs/ntfs3: prevent oob in case UpdateRecordDataRoot"
(<20260502105008.21827-1-jhapavitra98@gmail.com>) which
proposes calling ntfs3_bad_de_range(); that helper does not
exist in mainline. This patch uses inline checks. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: bridge: fix stale prevhdr pointer in br_ip6_fragment()
br_ip6_fragment() gets prevhdr, a pointer into the skb head, from
ip6_find_1stfragopt(), then calls skb_checksum_help(). For a cloned skb
skb_checksum_help() reallocates the head via pskb_expand_head(), leaving
prevhdr dangling. It is later dereferenced in ip6_frag_next(), causing a
use-after-free write.
Save prevhdr's offset before skb_checksum_help() and recompute it after,
like commit ef0efcd3bd3f ("ipv6: Fix dangling pointer when ipv6
fragment").
BUG: KASAN: slab-use-after-free in ip6_frag_next (net/ipv6/ip6_output.c:857)
Write of size 1 at addr ffff888013ff5016 by task exploit/141
Call Trace:
...
kasan_report (mm/kasan/report.c:595)
ip6_frag_next (net/ipv6/ip6_output.c:857)
br_ip6_fragment (net/ipv6/netfilter.c:212)
nf_ct_bridge_post (net/bridge/netfilter/nf_conntrack_bridge.c:407)
nf_hook_slow (net/netfilter/core.c:619)
br_forward_finish (net/bridge/br_forward.c:66)
__br_forward (net/bridge/br_forward.c:115)
maybe_deliver (net/bridge/br_forward.c:191)
br_flood (net/bridge/br_forward.c:245)
br_handle_frame_finish (net/bridge/br_input.c:229)
br_handle_frame (net/bridge/br_input.c:442)
...
packet_sendmsg (net/packet/af_packet.c:3114)
...
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Kernel panic - not syncing: Fatal exception in interrupt |
| Versions of the package zip-lib before 1.1.0 are vulnerable to Directory Traversal via the caching mechanism for path validation during the extraction process. An attacker can bypass security checks designed to prevent directory traversal. The intended security function, isOutsideTargetFolder, only checks and caches the path status when the initial directory symlink is created during the first extraction. |
| Sourcecodester CASAP Automated Enrollment System 1.0 is vulnerable to SQL Injection in update_password.php via the parameter new_password. |
| https://www.sourcecodester.com Advocate office management system 1.0 is affected by: SQL Injection. The impact is: execute arbitrary code (remote). The component is: control/activate_case.php,?id=1. The attack vector is: A SQL Injection vulnerability exists in the activate_case.php in parameter id endpoint of Advocate office management system. Unsanitized user input in the specified parameter is interpolated directly into an SQL query, allowing attackers to infer or extract data and, in some cases, execute stacked/time-based payloads. ¶¶ Affected Component & Parameter Affected Endpoint URL: http://localhost/advocate/kortex_lite/control/activate_case.php?id=1 HTTP Method: GET Vulnerable File: activate_case.php Parameter: id Vector Location: GET Injection Techniques (as identified by sqlmap) Type: error-based Title: MySQL >= 5.1 AND error-based - WHERE, HAVING, ORDER BY or GROUP BY clause (EXTRACTVALUE) Payload: id=1 AND EXTRACTVALUE(6268,CONCAT(0x5c,0x71766b6a71,(SELECT (ELT(6268=6268,1))),0x716a7a6b71)) Type: time-based blind Title: MySQL >= 5.0.12 AND time-based blind (query SLEEP) Payload: id=1 AND (SELECT 4464 FROM (SELECT(SLEEP(5)))aHqo) Proof of Concept (Burp Repeater) |
| Sourcecodester CASAP Automated Enrollment System 1.0 is vulnerable to SQL Injection in update_student.php via parameters fname and student_class. |
| kishan0725 Hospital Management System 4.0 is vulnerable to SQL Injection in check_availability.php via the parameters emailid and email. |
| An Insecure Direct Object Reference (IDOR) in the Employee Compensation View function of Infor Global HR v11.24.10.01.33 allows unauthorized attackers to arbitrarily view the compensation information of other employees via a crafted GET request. |
| Premiere Pro is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| GStreamer qtdemux Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation.
The specific flaw exists within the parsing of UncompressedFrameConfigBox structures. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29392. |
| Kamaji is the Hosted Control Plane Manager for Kubernetes. Prior to 26.7.4-edge, Kamaji derives a TenantControlPlane datastore schema, database user, and etcd key prefix from a lossy namespace-and-name normalization in GetDefaultDatastoreSchema() and GetDefaultDatastoreUsername(), allowing distinct tenants with colliding normalized identifiers to share control-plane state and read, modify, or destroy another tenant's Kubernetes data. This issue is fixed in version 26.7.4-edge. |
| IBM Engineering Requirements Management DOORS and DOORS Web Access 9.7.2.1 through 9.7.2.11, and 9.6.1.1 through 9.6.1.13 do not limit the length of a connection which could allow for a Slowloris HTTP denial of service attack to take place. This can cause the web server to become unresponsive. |
| Leantime 3.6.2 contains a cross-site request forgery vulnerability that allows unauthenticated attackers to perform state-changing actions on behalf of authenticated users by excluding the Laravel VerifyCsrfToken middleware from the global middleware stack in app/Http/Kernel.php. Attackers can craft malicious pages delivered via phishing emails or malicious websites to trigger unauthorized POST, PUT, and DELETE requests that create or delete projects, modify settings, and change permissions as any authenticated user. |
| Banks generates meaningful LLM prompts using a simple template language. In versions prior to 2.4.3, banks parses Tool JSON objects from the rendered body of {% completion %} blocks and later resolves their import_path field through importlib.import_module(...) + getattr(...) to obtain the callable that handles a tool call. There is no allowlist or sanitization on import_path, so any importable Python attribute (e.g. os.system, subprocess.getoutput) can be selected. When the LLM emits a tool_calls entry whose function.name matches the attacker-supplied tool name, the resolved callable is invoked with kwargs decoded from tool_call.function.arguments, yielding arbitrary code execution in the banks-hosting process. This is distinct from GHSA-gphh-9q3h-jgpp / CVE-2026-44209. That advisory was fixed in 2.4.2 by switching src/banks/env.py from Environment to SandboxedEnvironment. The fix does not touch src/banks/extensions/completion.py, and the unsafe import + getattr chain still executes on 2.4.2. The malicious Tool JSON is plain text in the rendered template body — it requires no Jinja attribute access, so the sandbox is irrelevant. This issue has been fixed in version 2.4.3. |
| Race in Updater in Google Chrome on Mac prior to 151.0.7922.72 allowed a local attacker to perform OS-level privilege escalation via a malicious file. (Chromium security severity: Critical) |
| Use after free in Navigation in Google Chrome prior to 151.0.7922.72 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
