| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Refactor jump offset calculation in tail call
The old macro-based jmp_offset calculation derives the jump distance
from a stale prior-pass code stride, which can lead to wrong branch
offsets and soft lockups under extra JIT passes.
Fix this by calculating the offset directly on the absolute target:
"ctx->offset[insn + 1] - ctx->idx".
To avoid a false 16-bit range check abort during size estimation, add
a "ctx->image == NULL" guard to inject a safe dummy offset. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Validate MSI data before routing it to EIOINTC
pch_msi_set_irq() passes e->msi.data straight into eiointc_set_irq() as
the irq number. The MSI data comes from userspace, that either via a
KVM_IRQ_ROUTING_MSI entry set with KVM_SET_GSI_ROUTING (used by irqfd
and KVM_IRQ_LINE) or directly via KVM_SIGNAL_MSI, and is never checked
against EIOINTC_IRQS.
eiointc_set_irq() uses the value with __set_bit()/__clear_bit() on the
256-bit isr bitmap, eiointc_update_irq() then indexes sw_coremap[] and
the per-cpu coreisr/sw_coreisr bitmaps with it. Therefore a data value
>= 256 reads and writes memory past the end of those arrays, i.e. any
process holding a VM fd can corrupt kernel memory beyond the allocation
of loongarch_eiointc.
Reject MSI data that doesn't fit in the EIOINTC irq space. The DMSINTC
path is unaffected as it decodes the vector from the address and masks
it. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Fix uninitialized stack variable issue with dmsintc
Variable vector[] is declared on stack in function dmsintc_inject_irq()
and sometimes it is used without initialized. Here fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Handle VNCR TLB invalidation race with vcpu_put() VNCR unmapping
While VNCR TLB invalidation always occurs under the MMU lock,
vcpu_put() doesn't, while it unmaps the VNCR page.
The problem is that the invalidation evaluates vncr_tlb::cpu to
decide whether an unmapping needs to take place (cpu != -1) before
performing it. On the other hand, this_cpu_reset_vncr_fixmap()
unconditionally unmaps if L1_VNCR_MAPPED is set.
These two obviously can race, with a TOCTOU pattern on the TLBI
path, and a BUG_ON() on the vcpu_put() path. And the two can end-up
calling vncr_fixmap(-1), with extra lethal effects.
Move the reset of vncr_tlb::cpu to -1 to a common function, and make
this update atomic so that only a single thread can reset the field
and perform the corresponding unmap. The vcpu_put() still need to
unconditionally unmap the current VNCR to close another ugly race.
Finally, the assignment of vncr_tlb::cpu is moved to be kept in sync
with the actual mapping, similar to L1_VNCR_MAPPED being set. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix memory corruption by not reinjecting CK machine checks
Channel-subsystem damage machine checks are for the host channel
subsystem. The guest channel subsystem is emulated in the userspace VMM.
There is no point in forwarding such machine checks into the guest.
This also simplifies the machine check reinjection and avoids kfree of a
stack variable as reported by sashiko. There might be still machine
checks that have the ck bit set with another bit (like instruction
damage), mask out the CK bit in s390_backup_mcck_info(), like the CP and
ED bits already are. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix length check __import_wp_info()
struct kvm_hw_breakpoint::len is a __u64 that is fully controlled by user
space. This is then assigned to wp_info->len, which is an int. The bounds
check is done on the truncated value while the allocation uses the
untruncated one:
wp_info->len = bp_data->len;
[...]
if (wp_info->len < 0 || wp_info->len > MAX_WP_SIZE)
return -EINVAL;
wp_info->old_data = kmalloc(bp_data->len, GFP_KERNEL_ACCOUNT);
Use the validated value for the allocation as intended. Without this
fix userspace can trigger >4GB allocations which will fail and result
in a WARN due to MAX_PAGE_ORDER. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: hyper-v: Clamp stimer deadline to avoid livelock
Fix an issue where userspace or the guest can program an Hyper-V
synthetic timer to have a deadline in the past via integer overflow,
preventing the CPU from making progress and triggering an RCU stall.
Hyper-V's SynIC exposes 4 per-vCPU synthetic timers to the
guest, which are emulated by KVM. Each is programmed through the
HV_X64_MSR_STIMERi_CONFIG and HV_X64_MSR_STIMERi_COUNT MSRs. Depending
on CONFIG, COUNT represents either the absolute expiration time or the
period of a periodic timer, both expressed in 100ns ticks. These timers
may be set both by the guest (WRMSR) and the host (KVM_SET_MSRS).
When the timer is enabled, stimer_start() translates COUNT to an
absolute monotonic deadline and arms an hrtimer. If COUNT is set to a
value close to U64_MAX, the deadline calculation can overflow.
ktime_add_ns(ktime_now, 100 * (stimer->exp_time - time_now))
This can result in a CPU livelock. stimer_start() arms the timer
via hrtimer_start() with a deadline in the past, which causes it to
immediately fire. The stimer callback then raises KVM_RQ_HV_STIMER, with
the intention of causing KVM to deliver a synthetic interrupt on the
next vCPU guest enter.
Then, once userspace issues KVM_RUN, vcpu_enter_guest() consumes the
request, calling kvm_hv_process_stimers(). This would normally disable
the timer via stimer_expiration() once the deadline is in the past.
However, the deadline comparison is done between the KVM reference
counter and stime->exp_time, which is a big value close to U64_MAX, so
this never happens for a few thousand years.
kvm_hv_process_timers() then re-arms the timer via stimer_start(), since
it was not disabled, which again fires immediately. Before entering
the guest, kvm_vcpu_exit_request() checks kvm_request_pending(),
which returns true due to the newly raised KVM_REQ_HV_STIMER. Then
vcpu_enter_guest() aborts the guest entry, returning early into
vcpu_run(), which loops back again into vcpu_enter_guest(), restarting
the cycle.
Since there are no manual yields in this loop, a task with SCHED_FIFO
may starve RCU grace-period kthreads, which exposes the stalls found
by syzcaller:
rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu: (detected by 1, t=10502 jiffies, g=14269, q=1142 ncpus=2)
rcu: All QSes seen, last rcu_preempt kthread activity 10500 (4294965239-4294954739), jiffies_till_next_fqs=1, root ->qsmask 0x0
rcu: rcu_preempt kthread starved for 10500 jiffies! g14269 f0x2 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=0
rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior.
( ... )
Call Trace:
<IRQ>
__run_hrtimer kernel/time/hrtimer.c:1773 [inline]
__hrtimer_run_queues+0x408/0xc30 kernel/time/hrtimer.c:1841
hrtimer_interrupt+0x45b/0xaa0 kernel/time/hrtimer.c:1903
local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1045 [inline]
__sysvec_apic_timer_interrupt+0x102/0x3e0 arch/x86/kernel/apic/apic.c:1062
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1056 [inline]
sysvec_apic_timer_interrupt+0xa1/0xc0 arch/x86/kernel/apic/apic.c:1056
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:697
RIP: 0010:__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:152 [inline]
RIP: 0010:_raw_spin_unlock_irqrestore+0xa8/0x110 kernel/locking/spinlock.c:194
Code: 74 05 e8 0b f4 5f f6 48 c7 44 24 20 00 00 00 00 9c 8f 44 24 20 f6 44 24 21 02 75 4f f7 c3 00 02 00 00 74 01 fb bf 01 00 00 00 <e8> 23 6b 27 f6 65 8b 05 7c 60 5a 07 85 c0 74 40 48 c7 04 24 0e 36
RSP: 0018:ffffc900040a7320 EFLAGS: 00000206
RAX: 5de15cb931505900 RBX: 0000000000000a06 RCX: 5de15cb931505900
RDX: 0000000000000007 RSI: ffffffff8daa9dc3 RDI: 0000000000000001
RBP: ffffc900040a73b0 R08: ffffffff8fc3d0
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Consume the locked rmap value in the lockless rmap walk
__kvm_rmap_lock() deliberately elides the rmap lock when it observes an
empty rmap. In that case kvm_rmap_lock_readonly() also re-enables
preemption and returns zero, so the caller holds neither the rmap lock
nor a preemption reference. The elision documents the invariant it
relies on:
* Elide the lock if the rmap is empty, as lockless walkers (read-only
* mode) don't need to (and can't) walk an empty rmap, nor can they add
* entries to the rmap. I.e. the only paths that process empty rmaps
* do so while holding mmu_lock for write, and are mutually exclusive.
kvm_rmap_age_gfn_range() ignores the returned value and unconditionally
enters for_each_rmap_spte_lockless(). The iterator started with
rmap_get_first(), which re-reads rmap_head->val rather than using the
value returned by the lock. If a writer populates the rmap between the
lock's read and the iterator's re-read, the aging path walks the newly
installed rmap without holding its lock.
For a KVM_RMAP_MANY rmap this leaves the walker following a
pte_list_desc chain that it never locked. A writer holding mmu_lock for
write may free that chain (e.g. kvm_zap_all_rmap_sptes() on the recycle
path, or any rmap zap) via kmem_cache_free() while the walk is in
progress, giving a slab use-after-free. Nothing serialises the two: the
aging path runs without mmu_lock when CONFIG_KVM_MMU_LOCKLESS_AGING=y,
and the rmap lock that would otherwise exclude the writer was elided.
Because the empty path re-enables preemption, the interval between the
two reads can span an arbitrary scheduling delay.
Fix the class of bug by having the lockless walk consume the value
returned by the lock instead of re-reading the rmap. Split
rmap_get_first() into __rmap_get_first(), which starts an iterator from
an already-read rmap value, and make for_each_rmap_spte_lockless() take
that value and call __rmap_get_first() directly.
kvm_rmap_age_gfn_range() passes the value returned by
kvm_rmap_lock_readonly(): when the lock was elided the value is zero,
__rmap_get_first() returns NULL, and the walk is skipped. No lockless
walker re-reads the rmap, so the lock-elision invariant cannot be
violated, and no lock()-without-paired-unlock() path is added to the
aging code. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Service local TLB flushes on failed nested VM-Enter
KVM services local TLB flushes on "full" nested VM-Exits (through
__nested_vmx_vmexit()), but not if a nested VM-Enter fails (e.g. due to
failed VMCS checks in nested_vmx_enter_non_root_mode()).
However, it is possible that KVM had queued TLB flushes that need to be
performed, even if the nested VM-Enter was not successful. For example,
if VPID is disabled for L2 (via nested_vmx_transition_tlb_flush(), or if
via the MSR load lists, as the SDM says:
If any MSR is being loaded in such a way that would architecturally
require a TLB flush, the TLBs are updated so that, after VM entry, the
logical processor will not use any translations that were cached before
the transition.
The SDM is unclear about when the TLB flush should occur, and whether or
not a failed VM entry would flush the TLB, so it is safer to always
do the TLB flush in this case.
More concretely, KVM also updates the last VPID L1 used for L2 in
nested_vmx_transition_tlb_flush() (i.e. last_vpid), even if the VM entry
ultimately fails. With the current code, KVM could miss a TLB flush if
L1 changes L2's VPID, then does a failed VM entry followed by a
successful one, as the failed VM entry would update last_vpid but not
actually flush the TLB. Servicing local TLB flushes on failed VM entries
makes sure that the TLB is always flushed when last_vpid is updated. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Ensure KVM_REQ_GET_NESTED_STATE_PAGES is cleared on VM-Exit
Always check and clear KVM_REQ_GET_NESTED_STATE_PAGES when emulating a
nested VM-Exit to ensure the request is cleared, even when KVM was built
with CONFIG_KVM_HYPERV=n, as KVM subtly relies on the "check" to clear
the flag and thus avoid double-mapping the vmcs12 pages, e.g. if KVM
manages to bail from VM-Enter without processing the request, and then
emulates VMLAUNCH or VMRESUME. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: ltrf216a: fix runtime PM reference leak in error path
ltrf216a_get_lux() acquires a runtime PM reference by calling
ltrf216a_set_power_state(data, true). However, if
ltrf216a_read_data() fails, the function returns immediately without
dropping the reference.
This leaves the runtime PM usage count unbalanced, preventing the device
from autosuspending after a failed read.
Fix this by releasing the runtime PM reference before returning from the
error path. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: apds9306: fix PM reference leak in apds9306_read_data()
apds9306_read_data() calls pm_runtime_resume_and_get() but several
error paths return directly without calling pm_runtime_put_autosuspend(),
leaking the runtime PM reference and preventing the device from
autosuspending.
Use PM_RUNTIME_ACQUIRE_AUTOSUSPEND() and PM_RUNTIME_ACQUIRE_ERR() to
automatically handle runtime PM reference release on all return paths. |
| djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. Prior to version 1.0.7, the SSE client→server POST endpoints are `@csrf_exempt` and the SSE GET stream endpoint had no Origin check, so a cross-origin page could drive a victim-cookie-authenticated SSE session: force the victim's browser to GET the stream URL (which creates and mounts a LiveView as the victim) and POST to the message endpoint with `credentials: include` to fire state-changing event handlers as the victim. The URL `session_id` is client-chosen (validated only for UUID *format*), so it is not a CSRF token, and a JSON body sent as `text/plain` is a CORS simple request with no preflight. The issue is fixed in 1.0.7. All three SSE endpoints validate the request `Origin` against `ALLOWED_HOSTS` (mirroring the WebSocket CSWSH defense) and reject cross-origin requests with 403; the POST endpoints additionally require `Content-Type: application/json` (415 otherwise), closing the `text/plain` simple-request bypass. As a workaround, disable the SSE transport, or front it with a proxy that enforces an Origin allowlist. |
| Nango through 0.70.4 fails to validate caller-supplied connection configuration values interpolated into provider token and proxy URL templates. Authenticated attackers can supply malicious configuration values to direct server requests at internal addresses or cloud metadata endpoints, potentially exfiltrating provider credentials. |
| HCL BigFix Service Management is affected by Cross-Site Scripting (XSS) vulnerability, which could allow an attacker to inject unsanitized malicious scripts that execute in a victim's browser, enabling session hijacking, account takeover, and unauthorized actions on behalf of affected users. |
| HCL BigFix Service Management is affected by a high-severity Broken Access Control vulnerability, which could allow a low-privileged user to gain unauthorized access to administrative screens and functions reserved for higher-privileged roles. |
| HCL BigFix Service Management is affected by SQL Injection flaw and a Cross-Tenant Data Exposure flaw vulnerabilities. which could allow an authenticated attacker to inject database commands to extract sensitive system details, as well as manipulate request values to gain unauthorized access to full personal profile data and PII across different organizations. |
| HCL BigFix Service Management is affected by a Server-Side Request Forgery (SSRF) vulnerability in its search functionality, which could allow an attacker to force the application server to send requests to internal systems that are not accessible from the internet. |
| Authorization bypass through User-Controlled key vulnerability in TECHIN2B TECHIN2B Application allows Privilege Abuse.
This issue affects TECHIN2B Application: from V1.0.7676.13 through 18092026.
NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF
The atlas driver requests its hardware data-ready IRQ with
devm_request_threaded_irq(); its threaded handler queues an irq_work,
atlas_work_handler(), that calls iio_trigger_poll(data->trig).
The IRQ is devm-managed, so free_irq() runs from the devres unwind after
atlas_remove() returns without flushing that irq_work. Once a buffer is
enabled, conversion-complete IRQs keep firing and queueing it; a pending
irq_work can therefore run after the unwind has freed atlas_data/indio_dev
and the trigger, when atlas_work_handler() derives the atlas_data pointer
via container_of() and dereferences data->trig, a use-after-free.
Call iio_trigger_poll_nested() directly from the threaded handler instead
of bouncing through irq_work. free_irq() then drains the threaded handler,
closing the window; other iio drivers with a threaded data-ready IRQ do the
same (e.g. bmi270).
This issue was found by an in-house static analysis tool. |
