Export limit exceeded: 429353 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (6907 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98064 | 1 Linux | 1 Linux Kernel | 2026-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix NULL-ptr-deref when showing a void BTF type btf_modifier_show() resolves the modifier and then calls btf_type_ops(t)->show() unconditionally. For the void type (type_id 0, BTF_KIND_UNKN) kind_ops[] has no entry, so ->show is NULL. A "const void" (a modifier resolving to void) cannot be a map key or value - map_check_btf() rejects it because void has no size - so the map dump path does not reach it. But bpf_snprintf_btf() takes a type_id straight from the BPF program, and passing such a "const void" from the vmlinux BTF NULL-derefs: KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] RIP: 0010:btf_modifier_show (kernel/bpf/btf.c:2914) Call Trace: <TASK> btf_type_show (kernel/bpf/btf.c:8251) btf_type_snprintf_show (kernel/bpf/btf.c:8321) bpf_snprintf_btf (kernel/trace/bpf_trace.c:1047) bpf_prog_test_run_raw_tp (net/bpf/test_run.c:829) __sys_bpf (kernel/bpf/syscall.c:4804) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) </TASK> Fall back to btf_df_show() when the resolved type has no show op; it emits the "<unsupported kind:N>" placeholder already used for kinds like FWD and FUNC. bpf_snprintf_btf() then returns the length as usual. | ||||
| CVE-2026-98065 | 1 Linux | 1 Linux Kernel | 2026-11-18 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject key-less BTF for hash maps map_check_btf() allows a key-less BTF (btf_key_type_id == 0) only for maps that have a ->map_check_btf callback, and leaves the actual decision to that callback. Hash maps used to have no ->map_check_btf, so a key-less BTF was rejected outright. That changed when htab and rhtab gained a ->map_check_btf to register a dtor - htab in commit 1df97a7453ee ("bpf: Register dtor for freeing special fields") and rhtab in commit 6905f8601298 ("bpf: Allow special fields in resizable hashtab"). Neither looks at the key, so a key-less hash map now passes map_check_btf() and gets created. Reading it back through bpffs feeds the key type_id 0 into btf_type_seq_show(); btf_type_by_id() returns the void type, kind_ops[BTF_KIND_UNKN] is NULL, and btf_type_show() dereferences it: RIP: 0010:btf_type_show+0x223/0x2e0 kernel/bpf/btf.c:8232 RSP: 0018:ffffc9000399f868 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000005 RSI: 0000000000000000 RDI: 0000000000000028 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: ffffc9000399f970 R11: 0000000000000001 R12: ffffffff9b96b140 R13: ffffc9000399f8e0 R14: ffff88803d393c00 R15: 0000000000000003 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000200000000000 CR3: 000000003d213000 CR4: 0000000000352ef0 DR0: 0000000039ae8f55 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: <TASK> btf_type_seq_show_flags+0xca/0x120 kernel/bpf/btf.c:8250 htab_map_seq_show_elem+0x12e/0x350 kernel/bpf/hashtab.c:1669 map_seq_show+0x13d/0x1e0 kernel/bpf/inode.c:293 traverse.part.0.constprop.0+0x107/0x650 fs/seq_file.c:112 traverse fs/seq_file.c:99 [inline] seq_read_iter+0x93f/0x1270 fs/seq_file.c:196 seq_read+0x344/0x4d0 fs/seq_file.c:163 vfs_read+0x1e4/0xb40 fs/read_write.c:572 ksys_pread64 fs/read_write.c:764 [inline] __do_sys_pread64 fs/read_write.c:772 [inline] __se_sys_pread64 fs/read_write.c:769 [inline] __x64_sys_pread64+0x1eb/0x250 fs/read_write.c:769 do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline] do_syscall_64+0x123/0x790 arch/x86/entry/syscall_64.c:84 entry_SYSCALL_64_after_hwframe+0x77/0x7f Reject a key-less BTF in htab_map_check_btf() and rhtab_map_check_btf(), restoring the previous behavior. | ||||
| CVE-2026-105586 | 1 Microsoft | 23 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 20 more | 2026-11-17 | 7 High |
| Null pointer dereference in Microsoft Windows SCSI Class System File allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-115428 | 1 Gitlab | 1 Gitlab | 2026-11-17 | 6.5 Medium |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 17.2 before 19.3.9, 19.4 before 19.4.8, and 19.5 before 19.5.6 that under certain conditions could have allowed an authenticated user with a valid agent token to cause a denial of service in the GitLab agent server (KAS) due to improper input validation. | ||||
| CVE-2026-130832 | 1 Gpac | 1 Gpac | 2026-11-17 | 5.5 Medium |
| GPAC before 26.07.0 contains a NULL pointer dereference vulnerability in xmt_parse_element() in src/scene_manager/loader_xmt.c that allows attackers to crash the process via ROUTE elements. Attackers can supply a crafted XMT-A scene file placing a ROUTE element before any scene command creates an access unit, crashing MP4Box during encoding and causing denial of service. | ||||
| CVE-2026-130829 | 1 Gpac | 1 Gpac | 2026-11-17 | 5.5 Medium |
| GPAC before 26.07.0 contains a NULL pointer dereference vulnerability in xmt_new_od_link_from_node() in src/scene_manager/loader_xmt.c that allows attackers to crash the process. Attackers can supply a crafted XMT scene file with an MFURL object-descriptor link lacking an OD ID and name, crashing MP4Box for denial of service. | ||||
| CVE-2025-71467 | 1 Gpac | 1 Gpac | 2026-11-17 | 5.5 Medium |
| GPAC before 26.02.0 contains a NULL pointer dereference vulnerability in gf_node_get_field_by_name() in src/scenegraph/base_scenegraph.c that lets attackers crash applications. Attackers can supply a crafted XMT scene referencing a never-created node to crash MP4Box or GPAC scene loader applications, causing denial of service. | ||||
| CVE-2026-98086 | 1 Linux | 1 Linux Kernel | 2026-11-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: ump: do not touch legacy_rmidi before it exists snd_ump_parse_endpoint() sets ump->parsed on every exit, including error, before the caller attaches the legacy rawmidi device. ump_handle_ep_name_msg() then treats parsed as "legacy_rmidi is live" and calls ump_legacy_set_rawmidi_name(), which snprintf()s into ump->legacy_rmidi->name. If a UMP packet arrives in that window (IRQ path from snd_ump_receive), legacy_rmidi is still NULL (KASAN null-ptr-deref in snprintf). Guard the legacy helpers. parsed only means endpoint info was parsed, not that legacy_rmidi exists. | ||||
| CVE-2025-71468 | 1 Gpac | 1 Gpac | 2026-11-17 | 5.5 Medium |
| GPAC before 26.02.0 contains a NULL pointer dereference vulnerability in gf_dash_group_get_audio_channels() in src/media_tools/dash_client.c that allows attackers to crash applications via crafted DASH manifests. Attackers can supply an MPD whose AudioChannelConfiguration element omits schemeIdUri or value, crashing MP4Box or GPAC DASH clients and causing denial of service. | ||||
| CVE-2026-110339 | 1 Libreswan | 1 Libreswan | 2026-11-17 | 7.5 High |
| The Libreswan pluto daemon dereferences a NULL pointer when a CERT payload is received with an empty PKCS#7 payload, causing the daemon to crash and restart. The NSS function SEC_PKCS7GetCertificateList() was used to check whether the content was empty, but this check did not trigger if the non-empty content of the PKCS#7 wrapped payload was an empty list. Continued triggering of this vulnerability can lead to a denial of service. Remote code execution is not possible. Authentication is not required to trigger this vulnerability. | ||||
| CVE-2026-64569 | 1 Linux | 1 Linux Kernel | 2026-11-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mpls: fix NULL deref in mpls_valid_fib_dump_req() on CONFIG_INET=n On CONFIG_INET=n builds, mpls_valid_fib_dump_req() walks the parsed attribute table itself instead of calling ip_valid_fib_dump_req(). The RTA_OIF arm passes tb[RTA_OIF] to nla_get_u32() without checking it is present, so an RTM_GETROUTE dump for AF_MPLS with strict checking and no RTA_OIF hits a NULL dereference. RTM_GETROUTE is RTNL_KIND_GET, which rtnetlink_rcv_msg() permits without CAP_NET_ADMIN, so an unprivileged user can trigger it. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:mpls_valid_fib_dump_req (net/mpls/af_mpls.c:2189) Call Trace: mpls_dump_routes (net/mpls/af_mpls.c:2236) netlink_dump (net/netlink/af_netlink.c:2331) __netlink_dump_start (net/netlink/af_netlink.c:2446) rtnetlink_rcv_msg (net/core/rtnetlink.c:7033) netlink_rcv_skb (net/netlink/af_netlink.c:2556) netlink_unicast (net/netlink/af_netlink.c:1345) netlink_sendmsg (net/netlink/af_netlink.c:1900) __sock_sendmsg (net/socket.c:790) ____sys_sendmsg (net/socket.c:2684) ___sys_sendmsg (net/socket.c:2738) __sys_sendmsg (net/socket.c:2770) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Skip unset attributes, as ip_valid_fib_dump_req() does. | ||||
| CVE-2026-106023 | 2 Apache, Apache Software Foundation | 3 Apache Http Server, Http Server, Apache Http Server | 2026-11-17 | 7.5 High |
| NULL pointer dereference vulnerability in Apache HTTP Server's mod_md during HTTP request processing. This issue affects Apache HTTP Server: from 2.4.30 through 2.4.69. | ||||
| CVE-2026-93672 | 1 Zephyrproject | 1 Zephyr | 2026-11-17 | 5.3 Medium |
| bt_att_find_req_by_user_data() in subsys/bluetooth/host/att.c walks every ATT channel attached to a connection and dereferences chan->req->user_data without checking chan->req. An ATT channel with no client request in flight holds chan->req == NULL — that is its normal idle state, set by att_handle_rsp() when a response resolves the transaction and tested by att_req_send_process() to pick a free channel — so the lookup reads through a NULL pointer as soon as it visits an idle channel. Every other chan->req user in the file already guards the pointer. The lookup is reached from the public bt_gatt_cancel() API and, more importantly, from the host itself: bt_gatt_unsubscribe() calls bt_gatt_cancel() while a subscribe CCC write is still outstanding (BT_GATT_SUBSCRIBE_FLAG_WRITE_PENDING), and call_notify_cb_and_maybe_unsubscribe() in subsys/bluetooth/host/gatt.c invokes bt_gatt_unsubscribe() from the RX path whenever an application notify callback returns BT_GATT_ITER_STOP. A malicious or malfunctioning peer can hold the trigger window open by withholding the ATT Write Response to the CCC write and then sending a notification for the subscribed handle. With CONFIG_BT_EATT the traversal is very likely to meet an idle sibling channel, since ATT channels are prepended to the list and a channel opened after the pending request was sent is visited first. The dereference is a read of a small constant offset from address zero, so the impact is availability only: no memory corruption, no attacker-chosen address and no information disclosure. On platforms and configurations where a near-NULL read traps — TrustZone non-secure images, MMU targets, native_sim, or builds with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_MPU/_DWT — the fault occurs in the Bluetooth RX context and results in a fatal error and device reset. On a plain Cortex-M build with the vector table mapped at address 0 and null-pointer detection disabled (the default) the read succeeds and the defect is inert. The fix adds an explicit chan->req != NULL test to the channel traversal and additionally rejects a NULL user_data argument, which would otherwise have matched, and cancelled, an unrelated request. | ||||
| CVE-2026-93669 | 1 Zephyrproject | 1 Zephyr | 2026-11-17 | 4.7 Medium |
| The ITE IT8xxx2 SHI host-command backend in subsys/mgmt/ec_host_cmd/backends/ec_host_cmd_backend_shi_ite.c arms the SPI peripheral before its receive context exists. shi_ite_init_registers() sets the state machine to SHI_STATE_READY_TO_RECV and calls irq_enable() while the device initializes at POST_KERNEL priority CONFIG_KERNEL_INIT_PRIORITY_DEFAULT (40), but data->rx_ctx and data->tx are only assigned later by shi_ite_backend_init(), which ec_host_cmd_init() invokes at CONFIG_EC_HOST_CMD_INIT_PRIORITY (default 80). If the attached host processor starts a SPI transaction inside that window, the Rx-valid-length interrupt fires, shi_ite_int_handler() passes its state check and calls shi_ite_parse_header(), which stores the host-derived request length through the still-NULL data->rx_ctx. On the IT8xxx2 low addresses are not backed by RAM, and with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_PMP the first bytes of the address space are explicitly made inaccessible, so the store raises a fatal access fault in interrupt context. The window widens further when CONFIG_EC_HOST_CMD_INITIALIZE_AT_BOOT is disabled and the application calls ec_host_cmd_init() itself. The result is a kernel panic on the embedded controller: with Zephyr's default fatal handler the CPU halts, so the controller stops servicing host commands until a hardware reset. Because the trigger is traffic from the attached host processor -- an untrusted peer from the controller firmware's point of view -- software on that host can provoke the fault by forcing a controller reset and issuing transactions during the reboot, turning a recoverable reset into a persistent outage. Impact is limited to availability: the faulting address is fixed and not attacker-chosen, so no memory-corruption primitive follows. The fix leaves the interface at SHI_STATE_DISABLED with the interrupt masked during device init, moves irq_enable() into shi_ite_backend_init() after the buffers are published, and makes shi_ite_int_handler() reject a NULL data->rx_ctx while write-clearing IT83XX_SPI_ISR and IT83XX_SPI_RX_VLISR so that an unexpected early interrupt cannot storm. | ||||
| CVE-2026-18566 | 1 The Document Foundation | 1 Libreoffice | 2026-11-17 | N/A |
| LibreOffice can import EMF, EMF+ and WMF images, which may be embedded in documents. Several out-of-bounds reads existed in the readers for these formats, because sizes, counts and offsets taken from a crafted image were not checked against the data the image actually holds. In fixed versions these values are checked against the size of each record and the data that remains, and a record that fails the checks is not used. | ||||
| CVE-2026-82292 | 1 Qt | 3 Qt, Qt Framework, Qtbase | 2026-11-17 | N/A |
| A NULL pointer dereference vulnerability in the Qt Framework QDomDocument::setContent() XML parsing path of the Qt XML module (qtbase). | ||||
| CVE-2026-16659 | 1 Mcu-tools | 1 Mcuboot | 2026-11-17 | 4 Medium |
| MCUboot's serial-recovery image-upload handler bs_upload() in boot/boot_serial/src/boot_serial.c declares const struct flash_area *fap = NULL and assigns it only via flash_area_open() part-way through the function. Two early validation failures (goto out_invalid_data) — a CBOR map that fails to decode, or an upload packet missing the off/data members — branch past the open while fap is still NULL, then fall into the shared epilogue. In MCUBOOT_ENC_IMAGES builds that epilogue unconditionally calls boot_handle_enc_fw(fap), which reaches boot_image_load_header() and flash_area_read() and dereferences the NULL flash_area. The defect is reachable pre-authentication: the trigger is the very first serial-recovery upload command carrying a malformed payload. The guarding conditions are default-true on a fresh recovery session — img_num, curr_off and img_size are zero-initialized statics, so curr_off == img_size and the primary-slot test both hold. It requires a non-default build: encrypted images (MCUBOOT_ENC_IMAGES / Zephyr CONFIG_BOOT_ENCRYPT_IMAGE) together with an active serial-recovery transport, on the Zephyr or Mynewt port (the two that build both boot/boot_serial/src/boot_serial.c and boot_serial_encryption.c with MCUBOOT_ENC_IMAGES). The impact is a transient denial of service of the bootloader during recovery. fap is a hard NULL rather than an attacker-controlled value, so there is no memory-corruption or information-leak primitive and image authentication is unaffected. Whether the dereference faults is platform-dependent — on targets where address 0x0 is mapped readable flash the read merely returns an error and execution continues, while targets that trap NULL (MPU / null-pointer-exception detection) take a hard fault. Because serial recovery is unauthenticated by design and already permits the console attacker to write the secondary slot, the added capability is only a low-value transient crash. The related unconditional flash_area_close(fap) call in the same epilogue is a safe no-op on the ports that reach it, so it does not contribute to the dereference. The affected ports are the Zephyr port — boot/zephyr/CMakeLists.txt compiles boot_serial.c under CONFIG_MCUBOOT_SERIAL and boot_serial_encryption.c under CONFIG_BOOT_ENCRYPT_IMAGE — and the Mynewt port, whose mcuboot_config.h defines MCUBOOT_SERIAL unconditionally and MCUBOOT_ENC_IMAGES under any BOOTUTIL_ENCRYPT_ syscfg, with boot/boot_serial/pkg.yml declaring no explicit source list so the whole directory is built. The Espressif port is not affected**: it compiles boot_serial.c but not boot_serial_encryption.c, and defines no MCUBOOT_ENC_IMAGES, so the #ifdef MCUBOOT_ENC_IMAGES block containing the call is preprocessed away. The NuttX, Cypress and Mbed ports do not build boot_serial.c at all. | ||||
| CVE-2026-130062 | 1 Gpac | 1 Gpac | 2026-11-17 | 5.5 Medium |
| GPAC before 26.07.0 contains a NULL pointer dereference vulnerability in gf_node_get_tag() that allows attackers to crash the process via crafted XMT connect elements. Attackers can supply an XMT scene file whose connect element has a parent with no node, crashing MP4Box during processing and causing denial of service. | ||||
| CVE-2025-38050 | 1 Linux | 1 Linux Kernel | 2026-11-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix kernel NULL pointer dereference when replacing free hugetlb folios A kernel crash was observed when replacing free hugetlb folios: BUG: kernel NULL pointer dereference, address: 0000000000000028 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 28 UID: 0 PID: 29639 Comm: test_cma.sh Tainted 6.15.0-rc6-zp #41 PREEMPT(voluntary) RIP: 0010:alloc_and_dissolve_hugetlb_folio+0x1d/0x1f0 RSP: 0018:ffffc9000b30fa90 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000342cca RCX: ffffea0043000000 RDX: ffffc9000b30fb08 RSI: ffffea0043000000 RDI: 0000000000000000 RBP: ffffc9000b30fb20 R08: 0000000000001000 R09: 0000000000000000 R10: ffff88886f92eb00 R11: 0000000000000000 R12: ffffea0043000000 R13: 0000000000000000 R14: 00000000010c0200 R15: 0000000000000004 FS: 00007fcda5f14740(0000) GS:ffff8888ec1d8000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000028 CR3: 0000000391402000 CR4: 0000000000350ef0 Call Trace: <TASK> replace_free_hugepage_folios+0xb6/0x100 alloc_contig_range_noprof+0x18a/0x590 ? srso_return_thunk+0x5/0x5f ? down_read+0x12/0xa0 ? srso_return_thunk+0x5/0x5f cma_range_alloc.constprop.0+0x131/0x290 __cma_alloc+0xcf/0x2c0 cma_alloc_write+0x43/0xb0 simple_attr_write_xsigned.constprop.0.isra.0+0xb2/0x110 debugfs_attr_write+0x46/0x70 full_proxy_write+0x62/0xa0 vfs_write+0xf8/0x420 ? srso_return_thunk+0x5/0x5f ? filp_flush+0x86/0xa0 ? srso_return_thunk+0x5/0x5f ? filp_close+0x1f/0x30 ? srso_return_thunk+0x5/0x5f ? do_dup2+0xaf/0x160 ? srso_return_thunk+0x5/0x5f ksys_write+0x65/0xe0 do_syscall_64+0x64/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e There is a potential race between __update_and_free_hugetlb_folio() and replace_free_hugepage_folios(): CPU1 CPU2 __update_and_free_hugetlb_folio replace_free_hugepage_folios folio_test_hugetlb(folio) -- It's still hugetlb folio. __folio_clear_hugetlb(folio) hugetlb_free_folio(folio) h = folio_hstate(folio) -- Here, h is NULL pointer When the above race condition occurs, folio_hstate(folio) returns NULL, and subsequent access to this NULL pointer will cause the system to crash. To resolve this issue, execute folio_hstate(folio) under the protection of the hugetlb_lock lock, ensuring that folio_hstate(folio) does not return NULL. | ||||
| CVE-2026-126051 | 1 Nodejs | 1 Nodejs | 2026-11-16 | 7.5 High |
| A deferred-callback use-after-destroy in Node.js TLS server handshake handling allows a remote, unauthenticated attacker to terminate the server process. When a TLS server uses any of the SNICallback, OCSPRequest, newSession, or resumeSession hooks, or server.addContext(), the corresponding OpenSSL callbacks are deferred, and the deferred code does not handle the underlying socket being destroyed between scheduling and execution. By sending a client hello that reaches the vulnerable path (for example, no SNI together with an OCSP request) followed by padding and a socket FIN, an attacker makes OpenSSL deliver the client hello and the end-of-file in the same tick, so the socket is destroyed before the deferred callback runs and the process raises an uncaught exception instead of emitting an 'error' event. This vulnerability affects Node.js 26.x and 24.x. | ||||