| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: do not repeat ceph_trim_dentries() if no progress possible
ceph_cap_reclaim_work() re-queues itself for as long as
ceph_trim_dentries() returns -EAGAIN, which happens whenever a lease
walk exhausts its `nr_to_scan` budget. This creates a busy loop that
consumes CPU without making any progress when there is nothing to
reclaim: with no cap pressure (`count==0`) and every scanned lease
still valid, each pass runs the full scan budget down to zero and
returns `-EAGAIN`, only to be queued again immediately.
The dir-lease walk made this worse. When `expire_dir_lease` is
`false` (i.e. we have no intention of reclaiming dir leases),
__dir_lease_check() returned `TOUCH` for every valid lease. `TOUCH`
moves the dentry to the tail of the list and resets `di->time` via
__dentry_dir_lease_touch(), so a walk over N valid leases pointlessly
rewrote the list, refreshed the timestamps (preventing them from ever
aging out) and always drained `nr_to_scan`, guaranteeing the `-EAGAIN`
requeue.
Fix this in three steps:
- Return `KEEP` instead of `TOUCH` when `expire_dir_lease` is
`false`. If we are not going to reclaim the lease, leave it in
place instead of churning the list and resetting its timestamp; the
walk then terminates naturally (or via `STOP` at the first fresh
lease).
- Only return `-EAGAIN` from the first (dentry-lease) walk when something
was actually freed. A full batch that frees nothing means retrying
the same list immediately is futile; fall through to the dir-lease
walk instead.
- After both walks, bail out with success (0) when nothing was freed
and there is no cap pressure (`count==0`). There is no reason to
keep retrying when we are not over the cap limit and made no
progress.
Under real cap pressure (`count>0`) the reclaim path is unchanged and
still retries via `-EAGAIN`.
Without this patch, I saw 500 ceph_trim_dentries() calls per second on
our web servers. This is very visible in `/proc/lock_stat` (5 minute
capture):
class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg
&mdsc->dentry_list_lock: 126180 128218 0.04 8063.44 15986965.20 124.69 1573354 5296812 0.04 8291.28 74164526.48 14.00
-----------------------
&mdsc->dentry_list_lock 111736 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8
&mdsc->dentry_list_lock 2631 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8
&mdsc->dentry_list_lock 3878 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8
&mdsc->dentry_list_lock 9973 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0
-----------------------
&mdsc->dentry_list_lock 123621 [<0000000050597999>] __dentry_leases_walk+0x64/0x2c8
&mdsc->dentry_list_lock 1822 [<000000007b11e319>] __ceph_dentry_dir_lease_touch+0x7c/0xa8
&mdsc->dentry_list_lock 2720 [<000000002f27cb6f>] __dentry_lease_unlist+0x50/0xa0
&mdsc->dentry_list_lock 55 [<00000000c0022f62>] __ceph_dentry_lease_touch+0x5c/0xa8
With this patch:
class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg
&mdsc->dentry_list_lock: 1203 1215 0.16 408.88 33082.88 27.23 4320501 7357389 0.04 500.64 1961578.00 0.27
-----------------------
&mdsc->dentry_list_lock 1029 [<000000003c9aea8a>] __ceph_dentry_dir_lease_touch+0x7c/0xa8
&mdsc->dentry_list_lock 1
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
audit: avoid dropping live tree ref on fsnotify rule autoremove
audit_del_rule() is used for both netlink deletion templates and internal
fsnotify autoremove. The former passes a parsed template which owns a
temporary tree reference; the latter passes the installed entry itself.
The unconditional audit_put_tree() at the end of audit_del_rule() assumes
the template case. For mixed AUDIT_DIR plus AUDIT_EXE rules, an fsnotify
autoremove event therefore drops the installed rule's live tree reference.
Repeating this across rules sharing the same tree can free the tree while
another rule still references it, and a later autoremove dereferences the
freed pathname while comparing rules.
Move the temporary-tree put to audit_rule_change(), the caller that owns
deletion templates. Keep it in the AUDIT_DEL_RULE cleanup so both
successful deletion and -ENOENT still release the parser-owned tree.
[PM: dropped unnecessary comment for line length reasons] |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: fix loff_t underflow in cifs_remap_file_range() when len == 0
With len == 0 (clone to EOF), the effective length is computed as:
len = src_inode->i_size - off;
If off > i_size, this is a negative loff_t, corrupting the ByteCount
in the FSCTL_DUPLICATE_EXTENTS_TO_FILE request and inverting the range
in filemap_write_and_wait_range(). The existing off >= i_size check
fires only after the ioctl has already been sent.
Snapshot i_size_read() once for both the bounds check and the length
calculation, eliminating the TOCTOU and 32-bit torn-read risk. Reject
off > src_size with -EINVAL. Treat off == src_size as a no-op,
consistent with __generic_remap_file_range_prep(). |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: clear setuid/setgid bit on write with cifsacl/modefromsid/posix extensions
When a file has the setuid or setgid bit set and is written to, the VFS
strips those bits and issues a setattr with ATTR_KILL_SUID/ATTR_KILL_SGID
together with an ATTR_MODE carrying the already-cleared mode.
Both cifs_setattr_unix() and cifs_setattr_nounix() unconditionally dropped
ATTR_MODE in that case:
/* skip mode change if it's just for clearing setuid/setgid */
if (attrs->ia_valid & (ATTR_KILL_SUID|ATTR_KILL_SGID))
attrs->ia_valid &= ~ATTR_MODE;
This is fine for the default mount, where the mode is only emulated via
the DOS read-only attribute and cannot represent the setuid/setgid bits
anyway. However, with the "cifsacl" or "modefromsid" mount options the
mode is stored on the server through an ACL (id_mode_to_cifs_acl()), with
the SMB3.1.1 POSIX extensions the mode is sent to the server directly,
and with the SMB1 Unix extensions (cifs_setattr_unix) the mode is sent
via CIFSSMBUnixSetPathInfo(). In all those cases dropping ATTR_MODE means
the cleared mode is never pushed to the server, so the setuid/setgid bit
survives the write.
This is a security issue: on local filesystems the setuid bit is stripped
when a file is written, but over these cifs.ko mounts the bit persists on
the server, potentially allowing an unexpected privilege escalation on
subsequent execution.
Fix this in two places:
1. cifs_setattr_nounix(): only take the "skip mode change" shortcut
when the mode is emulated via the DOS read-only attribute (i.e.
neither cifsacl/modefromsid nor the SMB3.1.1 POSIX extensions are
in effect), so that the cleared mode is propagated to the server
in the ACL / POSIX cases.
2. cifs_setattr_unix(): this function is only called when Unix
extensions are in effect, so the mode is always stored on the
server. Remove the shortcut entirely so that the cleared mode is
always pushed. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: clear ce->tgthint in free_tgts()
When free_tgts() frees all structures in ce->tlist, ce->tgthint
is left pointing to one of the freed cache_dfs_tgt structures.
If ce->tgthint is not reset before it is used later, it results
in a use-after-free.
Set ce->tgthint to NULL in free_tgts() after the elements are
freed to reflect that no elements remain. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix use-before-check of ReparseDataLength in reparse_buf_ptr()
reparse_buf_ptr() reads buf->ReparseDataLength before checking that
count covers the full fixed header:
buf = (struct reparse_data_buffer *)((u8 *)io + off);
len = sizeof(*buf); /* 8 bytes */
rdlen = le16_to_cpu(buf->ReparseDataLength); /* offset 4, 2 bytes */
if (count < len || count < rdlen + len) /* check comes after */
struct reparse_data_buffer has ReparseDataLength at offset 4. If a
server returns OutputCount < 6, the read at offset 4-5 reaches past
the end of the received data. The off+count bounds against iov_len
were already validated, but that does not protect against count being
smaller than sizeof(*buf).
Split the check: verify count >= sizeof(*buf) before reading
ReparseDataLength, then verify count covers the data region. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: reject a tree connect response whose byte count is too small
CIFSTCon() bounds its strnlen() over the byte area with the server's
ByteCount minus two, which for ByteCount 0 or 1 goes negative as an int
and converts to a huge size_t. The later subtraction wraps the __u16
bytes_left, and that is what bounds cifs_strndup_from_utf16(): a bound of
up to 65535 against a ~16 KB cifs_req_poolp object runs off the end of the
slab object, and the bytes reach userspace through tcon->nativeFileSystem
in /proc/fs/cifs/DebugData.
Reject a byte area too small for what the parser consumes. Two bytes is
the least it can consume, and no conformant response carries fewer. The
new trace point is the 129th smb_eio_trace entry, which __mode(byte)
cannot represent, so the attribute goes with it. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: sensor: custom: Fix field sysfs group cleanup on failure
hid_sensor_custom_add_attributes() creates one sysfs group for each
custom sensor field. If sysfs_create_group() fails after some groups
have already been created, the function returns the error without
removing the previously created groups.
Add a local unwind path to remove the groups that were already created.
With enable_sensor exposed only after the field attributes are ready,
this path can free sensor_inst->fields without leaving enable_sensor
able to access pointers into that array. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: libata-scsi: fix DSM TRIM for sector sizes larger than 2048 bytes
ata_scsi_write_same_xlat() translates a SCSI WRITE SAME command with the
UNMAP bit set into an ATA DATA SET MANAGEMENT TRIM command. The TRIM
descriptor is built by ata_format_dsm_trim_descr() into the 2048-byte
ata_scsi_rbuf staging buffer, and the number of bytes copied is compared
against the logical sector size by the caller:
size = ata_format_dsm_trim_descr(scmd, trmax, block, n_block);
if (size != len) /* len == sdp->sector_size */
goto invalid_param_len;
ata_format_dsm_trim_descr() clamps the copy length to ATA_SCSI_RBUF_SIZE
(2048). On a device whose logical sector size exceeds that (e.g. a 4Kn
device, where sector_size == 4096) the function can never return more than
2048, while the caller expects it to return sector_size. The comparison
therefore always fails, so every TRIM is rejected with "Parameter list
length error" and WARN_ON() splats on each attempt. TRIM / discard is
thus completely broken on such devices.
The descriptor was incorrectly sized from the logical sector size. A DSM
TRIM payload is a list of 512-byte pages, each holding up to
ATA_MAX_TRIM_RNUM (64) LBA Range Entries, and is independent of the logical
sector size. The Block Limits VPD page already advertises a single such
page as the maximum WRITE SAME length (65535 * ATA_MAX_TRIM_RNUM logical
blocks), so the block layer never sends a request that needs more than one
page.
Emit exactly one 512-byte page, independent of the logical sector size,
and transfer only that page (COUNT == 1). For a 512-byte-sector device
this is unchanged; devices with larger logical sectors now work instead of
failing every TRIM. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable preemption in __bpf_get_stack
get_perf_callchain() returns a per-CPU perf_callchain_entry buffer and
releases its recursion slot via put_callchain_entry() before returning,
so nothing keeps the entry reserved while __bpf_get_stack() consumes
it below.
A preemptible BPF program (e.g. a non-sleepable raw tracepoint program
on a PREEMPT kernel, which runs under migrate_disable() but not
preempt_disable()) can be scheduled out between obtaining the entry
and the copy. Another task scheduled on the same CPU then reuses the
same per-CPU buffer and overwrites trace->nr with a larger value.
copy_len is then computed from the inflated trace->nr and can exceed
the caller's buffer, causing an out-of-bounds write in the memcpy()
and in the build_id path.
The rcu_read_lock() taken here alone does not prevent this. It is
only taken on the may_fault path, and under CONFIG_PREEMPT_RCU it does
not disable preemption; it merely keeps perf's callchain buffer array
alive (freed via call_rcu()) and does nothing to stop another task
from reusing the entry.
Disable preemption around obtaining the callchain entry and copying
it into the caller's buffer, so the entry cannot be reused underneath
us and trace->nr stays bounded by max_depth. Build ID resolution may
fault and is therefore deferred until after preemption is re-enabled;
by then the instruction pointers have already been copied into buf,
so it operates only on that private copy. Note, preempt_disable() also
subsumes the buffer-lifetime guarantee the rcu_read_lock() provided,
since a preempt-disabled section is an RCU read-side critical section
for the callchain buffers' call_rcu() reclaim.
[ changed Fixes: commit ] |
| In the Linux kernel, the following vulnerability has been resolved:
dm array: validate array block headers on read
array_block_check() validates blocknr and csum and nothing else, while
node_check(), next to it, has bounded the structural fields since both
were written. dm_array_cursor_next() takes its loop bound from the
on-disk nr_entries and element_at() is unguarded pointer arithmetic, so
a count larger than the block holds keeps the cursor in one block while
the index grows past it and the read walks off the dm-bufio buffer --
dm_cache_load_mappings() drives it once per cache block at activation.
Check the header against itself: reject a zero value_size, require
max_entries to equal calc_max_entries() for that value_size and block
size, and require nr_entries to fit. Equality rather than an upper bound,
since a count below the real capacity trips BUG_ON() in fill_ablock() and
trim_ablock(). Metadata dm-array writes satisfies all three. |
| In the Linux kernel, the following vulnerability has been resolved:
dm array: reject an array block whose value size is not the caller's
array_block_check() can only compare the header against itself, so a block
with value_size 4 and max_entries 1018 is internally consistent and passes.
dm-cache keeps two arrays -- mappings at 8 bytes and hints at 4 -- and the
roots for both live in the superblock. Point the mappings root at a hint
block and __load_mappings() walks it through an info whose value size is 8,
so element_at() strides 8 bytes over 4-byte entries and reaches offset 8160
of a 4096-byte block.
get_ablock() and __shadow_ablock() are the two places that hold the block
and the caller at once. Reject there when the two value sizes disagree.
Arrays only ever read their own blocks, so this fires on crafted metadata
only. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: serialize security confirmation handling
rfcomm_security_cfm() looks up a session on session_list and then walks
its DLC list without holding rfcomm_mutex. Since RFCOMM session teardown
uses rfcomm_mutex, krfcommd can close and free the same session and DLCs
concurrently:
hci_rx_work krfcommd
----------- ---------
rfcomm_session_get()
rfcomm_lock()
rfcomm_session_close()
rfcomm_dlc_unlink()
rfcomm_session_del()
kfree(s)
rfcomm_unlock()
walk s->dlcs
The callback can then read a freed session list head and touch freed DLCs
while updating their flags or timers.
Serialize the session lookup and DLC traversal in rfcomm_security_cfm()
with rfcomm_mutex. This matches the existing RFCOMM session lifetime
rules and prevents concurrent rfcomm_session_del() / rfcomm_dlc_unlink()
from tearing the objects down while the callback is using them.
KASAN reported:
BUG: KASAN: slab-use-after-free in rfcomm_security_cfm+0x41c/0x440
Read of size 8 at addr ffff888111fb3960 by task kworker/u17:1/89
Workqueue: hci0 hci_rx_work
Call Trace:
rfcomm_security_cfm+0x41c/0x440
hci_encrypt_cfm+0x139/0x590
hci_encrypt_change_evt+0x37b/0xc40
hci_event_packet+0x71b/0xb20
hci_rx_work+0x293/0x730
Allocated by task 69:
rfcomm_session_add+0x9e/0x2f0
rfcomm_run+0x44b/0x41e0
Freed by task 69:
kfree+0x131/0x3c0
rfcomm_session_del+0x188/0x220
rfcomm_run+0x1985/0x41e0 |
| In the Linux kernel, the following vulnerability has been resolved:
ip: orphan prefetched skbs before multicast forwarding
IPv4 and IPv6 input preserve an skb->sk association installed by
bpf_sk_assign() so that local delivery can use the selected socket under
RCU. Both address families can also prefetch a socket in UDP early demux.
In both paths (BPF and UDP early demux) a reference is not guaranteed to
be held on the socket.
When a multicast packet is not locally deliverable, IPv6 hands the
original skb to ip6_mr_input(). IPv4's ip_mr_input() similarly keeps the
original skb when local delivery is not needed. Either path can put the
skb on an unresolved multicast route queue or forward it after the
receive-side RCU section ends.
After the prefetched socket is destroyed, a later skb free invokes
sock_pfree() and dereferences the stale skb->sk. Orphan the skb before
each non-local multicast forwarding path. Local delivery retains the
original skb; the existing skb_clone() calls provide multicast forwarding
with a socket-free clone. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_tunnel: use skb_cow_head() in ip6_tnl_xmit()
ip6_tnl_xmit() may need to expand headroom before it can push the
outer IPv6 and optional encap headers. It currently does that with
skb_realloc_headroom(), copies skb->sk ownership, consumes the original
skb, and then continues processing with the replacement skb kept only in
its local variable.
That is safe only if the helper cannot fail afterwards. But this helper
still has post-reallocation error exits. collect_md tunnels reject
non-NONE encap after the replacement, and ip6_tnl_encap() can also fail
later. In those cases the helper returns an error to its callers while
the caller still only has the original skb pointer.
Both ip6_tnl_start_xmit() and the IPv6 GRE paths free the caller skb on
error, so they can end up freeing an skb that ip6_tnl_xmit() already
consumed.
Use skb_cow_head() instead. It provides the required headroom and
writability without privately replacing the caller-owned skb, so later
error returns cannot leave callers with a stale pointer.
The Ethernet users, ip6gretap and ip6erspan, clear IFF_TX_SKB_SHARING
and already call skb_cow_head() before entering ip6_tnl_xmit(). They do
not rely on the removed skb_shared() reallocation. This also makes the
IPv6 tunnel path consistent with ip_tunnel_xmit(). |
| In the Linux kernel, the following vulnerability has been resolved:
libnvdimm/labels: Prevent integer overflow in __nd_label_validate()
The on-media namespace index field nslot is a u32 read from the DIMM
label storage area. __nd_label_validate() bounds it against the config
area size, but sizeof_namespace_label() returns unsigned, so the product
nslot * label_size is evaluated in 32-bit and wraps modulo 2^32 before
the comparison. A crafted nslot passes the bound and is then used as the
loop trip count in nd_label_data_init(), whose memset() walks off the end
of the config_size buffer: an out-of-bounds write.
The field is not trusted -- it comes from the medium, or from userspace
via ND_CMD_SET_CONFIG_DATA. Evaluate the product in 64-bit so the bound
check is exact; conforming labels are unaffected.
The check was safe when introduced by commit 4a826c83db4e ("libnvdimm:
namespace indices: read and validate"): it multiplied by sizeof(struct
nd_namespace_label), a size_t, so on a 64-bit build the product did not
wrap. Commit 564e871aa66f ("libnvdimm, label: add v1.2 nvdimm label
definitions") narrowed it to 32 bits when the label size became a runtime
value read via sizeof_namespace_label(). |
| In the Linux kernel, the following vulnerability has been resolved:
md: do overflow check for sb->bblog_shift in super_1_load()
In super_1_load(), sb->bblog_shift is an __u8 type value loaded from on-
disk superblock. It is used for badblocks API badblocks_set() by the
following sequence,
1930 rdev->badblocks.shift = sb->bblog_shift;
1931 for (i = 0 ; i < (sectors << (9-3)) ; i++, bbp++) {
1932 u64 bb = le64_to_cpu(*bbp);
1933 int count = bb & (0x3ff);
1934 u64 sector = bb >> 10;
1935 sector <<= sb->bblog_shift;
1936 count <<= sb->bblog_shift;
1937 if (bb + 1 == 0)
1938 break;
1939 if (!badblocks_set(&rdev->badblocks, sector, count, 1))
1940 return -EINVAL;
1941 }
bb->bblog_shit is in range of 0-255, variable sector is 64bit width, for
an invalid bb->bblog_shit, it is possible to make sector be overflowed
by the following calculation,
1935 sector <<= sb->bblog_shift;
Then in turn when call badblocks_set() at line 1939 with the invalid
rdev->badblocks.shift set at line 1930, may result an overflow inside
_badblocks_clear() in block/badblocks.c.
Although there are many places to call badblocks APIs, the non-zero
shift value is only used in super_1_load(), other places always use 0 as
the shift value. Therefore it is unnecessary to do a general shift value
overflow check inside badblock API, and just check here as the caller.
This may avoid unnecessary check, make the badblocks API code more simple
and elegant. |
| In the Linux kernel, the following vulnerability has been resolved:
mpls: reload header after pskb_may_pull()
mpls_select_multipath() calls mpls_multipath_hash() to choose a nexthop
when an MPLS route has multiple nexthops. While walking the MPLS label
stack, the hash routine caches hdr for the current label. After finding
the bottom-of-stack label, it calls pskb_may_pull() before reading the
inner IP header.
If an skb is constructed with the inner IP header in nonlinear data and
insufficient tailroom in the linear head, pskb_may_pull() calls
pskb_expand_head() to replace the skb head and free the old one. This
leaves hdr pointing to freed memory. The IPv6 path can invalidate hdr
again when it performs a second pull for the larger header.
The issue was found through static analysis. A reproducer sending a legal
Geneve packet through a bareudp/MPLS multipath setup triggered the same
KASAN report in 2 of 2 unpatched runs:
BUG: KASAN: slab-use-after-free in mpls_select_multipath
Read of size 1 at addr ffff88800ecc6e20 by task ksoftirqd/1/23
Call Trace:
mpls_select_multipath
mpls_forward
__netif_receive_skb_list_core
netif_receive_skb_list_internal
napi_complete_done
gro_cell_poll
__napi_poll
net_rx_action
Freed by task 23:
kfree
pskb_expand_head
__pskb_pull_tail
mpls_select_multipath
Reload hdr from the current skb head after each successful pull before
deriving the inner IPv4 or IPv6 header pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix uninitialized local_id in syncookie MP_JOIN reconstruction
mptcp_token_join_cookie_init_state() restores remote_nonce, local_nonce,
backup, join_id, token and msk from the saved cookie entry when rebuilding
the request socket for a MP_JOIN 4th-ACK handled under SYN cookies, but it
does not restore local_id, even though the SYN path saved it.
subflow_ulp_clone() then reads that uninitialized field and stores it as
the joined subflow's address-ID. Because the request-sock slab is
SLAB_TYPESAFE_BY_RCU and not zeroed on allocation, the value is the stale
byte of a previously freed request socket, which an off-path peer can
influence by sending concurrent MP_JOIN SYNs. This corrupts the path
manager's id-based subflow bookkeeping for the connection.
Restore subflow_req->local_id from the cookie entry, as done for the other
fields. |
| In the Linux kernel, the following vulnerability has been resolved:
nouveau/gem: reserve the bo in the info ioctl around the vma lookup
In the non-uvmm path, there could be a race between the info lookup
finding the vma, and the gem close path closing the vma leading
to a use-after-free.
Spotted with the help of Opus 4.6. |
