| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Buffer under-read vulnerability in Apache Tomcat meant that a large non-blocking write could result in the response body being split between the current request and the next request received on that connection leading most likely to failure of the second request and possibly leakage of data from the first response to the second.
This issue affects Apache Tomcat: from 11.0.0-M25 through 11.0.26.
Users are recommended to upgrade to version 11.0.27, which fixes the issue. |
| Incorrect object recycling and re-use vulnerability in Apache Tomcat affecting HTTP/2 processing of asynchronous servlets can trigger request and/or response mix-up between users.
This issue affects Apache Tomcat: from 11.0.22 through 11.0.26, from 10.1.55 through 10.1.60, from 9.0.118 through 9.0.122.
Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fixes the issue. |
| A missing critical step in authentication vulnerability in Apache Tomcat when the JNDI realm was configured with with a non GSSAPI SASL authentication mechanism allowed attackers to authenticate without providing the correct password.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.26, from 10.1.0-M1 through 10.1.60, from 9.0.0.M1 through 9.0.122.
The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fix the issue. |
| A security flaw has been discovered in DrayTek Vigor2960 1.5.1.6 Revision 8218. The affected element is the function cgiEscape of the file /cgi-bin/mainfunction.cgi of the component swmconfigupload. The manipulation of the argument multipart results in path traversal. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks. Upgrading to version 1.5.1.7 is sufficient to fix this issue. The affected component should be upgraded. The vendor explains: "2960 1.5.1.7 has corrected many security issues. And 2960 is EoS with limited support, only major issues would be reviewed(e.g. unauthenticated vuln.)". This vulnerability only affects products that are no longer supported by the maintainer. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/hyperv: validate resolution_count and fix WIN8 fallback
A SYNTHVID_RESOLUTION_RESPONSE with resolution_count > 64 walks past
the supported_resolution[SYNTHVID_MAX_RESOLUTION_COUNT] array in the
parse loop. Bound resolution_count against the array size, folded
into the existing zero-check.
When the WIN10 resolution probe fails, the caller in
hyperv_connect_vsp() left hv->screen_*_max / preferred_* unpopulated,
which sets mode_config.max_width / max_height to 0 and makes
drm_internal_framebuffer_create() reject every userspace framebuffer
with -EINVAL. The pre-WIN10 branch had the same gap for
preferred_width / preferred_height. Use a single post-probe fallback
guarded by screen_width_max == 0 so both paths converge on the WIN8
defaults. |
| The issue was addressed with improved bounds checks. This issue is fixed in iOS 26.6 and iPadOS 26.6, iOS 26.7 and iPadOS 26.7, macOS Sequoia 15.8, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6, watchOS 26.6. Processing a maliciously crafted file may lead to unexpected app termination. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: close completed creates on compound wait errors
compound_send_recv() waits for responses in order. If a later wait is
interrupted, or if a later MID fails during response synchronization, an
earlier CREATE may already have opened a remote handle. The earlier mid
is then released without invoking handle_cancelled_mid(), leaving the
remote handle open because no FID was copied to the caller.
Mark completed earlier mids as cancelled when a compound wait or MID
synchronization aborts. Keep their response buffers attached while the
MIDs are synchronized, and transfer them only after synchronization of
the processed responses, so the release path can inspect successful
CREATE responses and queue SMB2_close() after a later failure. Account for
a remote open only after the close work is allocated and before it is
queued, since the caller has not yet updated num_remote_opens. Mark the
create+close compound used by smb2_unlink() so it is not closed again.
Non-CREATE responses and compounds that already include a close keep their
existing behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
RISC-V: KVM: Serialize IMSIC attributes with vCPU migration
KVM device ioctls are not serialized against KVM_RUN. As a result,
kvm_riscv_aia_imsic_rw_attr() can snapshot the physical CPU and HGEI of
an IMSIC VS-file before a concurrent vCPU migration releases it.
The HGEI can then be allocated to another vCPU before imsic_vsfile_rw()
uses the stale tuple. A GET or SET attribute may consequently access the
new owner's interrupt file.
Serialize the entire IMSIC attribute operation with the target vCPU
mutex. This prevents the VS-file from being migrated and recycled until
the attribute access completes. Acquire the mutex killably so that the
device ioctl remains interruptible while waiting for KVM_RUN to finish. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Fix null ptr deref on nested wp/unmap, teardown race
Commit 7270cc9157f4 ("KVM: arm64: nv: Handle VNCR_EL2 invalidation from MMU
notifiers") introduced VNCR_EL2 invalidation in both kvm_nested_s2_unmap()
and kvm_nested_s2_wp().
However at the point of this being performed concurrent stage 2 teardown of
a nested guest can cause kvm->arch.mmu.pgt to be set to NULL.
This happens in kvm_flush_shadow_all() -> kvm_arch_flush_shadow_all() ->
kvm_free_stage2_pgd() and is performed under the kvm->mmu_lock.
Commit ec14c272408a ("KVM: arm64: nv: Unmap/flush shadow stage 2 page
tables") introduced the teardown of the entire nested MMU range, which then
invokes stage2_apply_range() with resched=true:
mmu_notifier_invalidate_range_start()
-> ... -> kvm_mmu_notifier_invalidate_range_start()
-> kvm_mmu_unmap_gfn_range()
-> kvm_unmap_gfn_range()
-> kvm_nested_s2_unmap()
-> kvm_stage2_unmap_range()
-> __unmap_stage2_range()
-> stage2_apply_range()
This means that stage2_apply_range() can drop the kvm->mmu_lock and thus
concurrent progress can be made in lockstep with
kvm_arch_flush_shadow_all().
If kvm_arch_flush_shadow_all() advances ahead of stage2_apply_range() and
completes its operation it guarantees a NULL pointer deref.
Since kvm_free_stage2_pgd() is performed under the kvm->mmu_lock this will
either be observed NULL or not and serialised against
kvm_free_stage2_pgd().
Resolve the issue by abstracting the invalidation to a new function,
kvm_invalidate_vncr_ipa_all(), and check that the pgt is non-NULL before
dereferencing it. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Container Isolation FS Filter Driver (unionfs.sys) allows an authorized attacker to elevate privileges locally. |
| Improper access control in Windows Container Isolation FS Filter Driver (unionfs.sys) allows an authorized attacker to elevate privileges locally. |
| Description
When NGINX Plus or NGINX Open Source is configured with ssl_session_cache
shared:name:size
without an explicit ssl_session_ticket_key file directives to automatically rotate SSL session ticket keys, a remote unauthenticated attacker is able to forge client SSL sessions
in a non-deterministic manner that is beyond the attacker's control. An attacker could leverage this vulnerability to bypass verification of client certificates.
Impact
This vulnerability can lead to the exposure of resources or functionality to unintended actors, possibly providing attackers with access to sensitive information. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| Incomplete cleanup vulnerability in Apache Tomcat could cause TLS 1.3 connections to fail intermittently.
This issue affects Apache Tomcat: from 11.0.0-M21 through 11.0.26, from 10.1.25 through 10.1.60, from 9.0.90 through 9.0.122.
Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fix the issue. |
| Incomplete cleanup vulnerability in Apache Tomcat allowed an trailer information from a previous request to leak into a subsequent request.
This issue affects Apache Tomcat: from 11.0.0-M23 through 11.0.26, from 10.1.27 through 10.1.60, from 9.0.92 through 9.0.122.
Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fix the issue. |
| Time-of-check time-of-use (TOCTOU) race condition vulnerability in Apache Tomcat when creating unix domain sockets for the APR/Native connector allows an unauthorised local user to access the unix domain socket. The fix for CVE-2026-65183 only addressed the NIO connector. It did not address the same issue in the APR/Native connector.
This issue affects Apache Tomcat: from 9.0.47 through 9.0.122.
Users are recommended to upgrade to version 9.0.123, which fixes the issue. |
| Execution After Redirect (EAR) vulnerability in Apache Tomcat.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.26, from 10.1.0-M1 through 10.1.60, from 9.0.0.M1 through 9.0.122.
The following versions were EOL at the time the CVE was created but are
known to be affected: from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.27, 10.1.61, 9.0.123, which fixes the issue. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.15, 4.0.20, 4.1.11, and 4.2.6, the stream protocol stored the FrameMax value negotiated during the Tune handshake but did not compare it with an inbound frame's declared length before buffering the frame. With the stream plugin enabled, a remote client could therefore cause excessive memory pressure and denial of service by declaring an oversized frame. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, and 4.2.6. |
| Not Failing Securely ('Failing Open') vulnerability in Apache Tomcat. If the OpenSSLLifecycleListener is configured to use FIPS mode but FIPS activation fails, Tomcat logs and error but continues to use JSSE in non-FIPS mode with the provided configuration.
This issue affects Apache Tomcat: from 11.0.0-M14 through 11.0.26, from 10.1.22 through 10.1.60, from 9.0.92 through 9.0.122.
Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fix the issue. |
| RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.0.22 and 4.1.14 and 4.2.7, Admin-only atom exhaustion: PUT /api/users tags list. settags/2 maps rabbitdatacoercion:toatom/1 over the user's tags list. The 20 MB management body limit fits ~3-4M short tag strings. An administrator can crash the node in a single request by creating a user (or importing definitions) with ~1M unique tag administrator. This issue is fixed in versions 4.0.22 and 4.1.14 and 4.2.7. |
| RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.0.22 and 4.1.14 and 4.2.7 and 4.3.1, Atom exhaustion: toatom on global-parameter :name. resourceexists/2 (and the PUT/DELETE handlers) call rabbitdatacoercion:toatom/1 on the :name URL path segment. toatom/1 uses binarytoatom/2 (unsafe). The endpoint requires policymaker (not management, but below A user with the policymaker tag can crash the node by exhausting the atom table via repeated requests to /api/global-parameters/:name with unique :name Management plugin enabled policymaker tag ~1M HTTP. This issue is fixed in versions 4.0.22 and 4.1.14 and 4.2.7 and 4.3.1. |
